1. 08 Dec, 2019 5 commits
    • Srinivas Neeli's avatar
      can: xilinx_can: Fix missing Rx can packets on CANFD2.0 · 9ab79b06
      Srinivas Neeli authored
      CANFD2.0 core uses BRAM for storing acceptance filter ID(AFID) and MASK
      (AFMASK)registers. So by default AFID and AFMASK registers contain random
      data. Due to random data, we are not able to receive all CAN ids.
      
      Initializing AFID and AFMASK registers with Zero before enabling
      acceptance filter to receive all packets irrespective of ID and Mask.
      
      Fixes: 0db90713 ("can: xilinx: add can 2.0 support")
      Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
      Signed-off-by: default avatarSrinivas Neeli <srinivas.neeli@xilinx.com>
      Reviewed-by: default avatarNaga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
      Cc: linux-stable <stable@vger.kernel.org> # >= v5.0
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      9ab79b06
    • Marc Kleine-Budde's avatar
      can: j1939: fix address claim code example · 8ac9d71d
      Marc Kleine-Budde authored
      During development the define J1939_PGN_ADDRESS_REQUEST was renamed to
      J1939_PGN_REQUEST. It was forgotten to adjust the documentation
      accordingly.
      
      This patch fixes the name of the symbol.
      
      Reported-by: https://github.com/linux-can/can-utils/issues/159#issuecomment-556538798
      Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
      Cc: Oleksij Rempel <o.rempel@pengutronix.de>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      8ac9d71d
    • Oleksij Rempel's avatar
      can: j1939: j1939_sk_bind(): take priv after lock is held · 00d4e14d
      Oleksij Rempel authored
      syzbot reproduced following crash:
      
      ===============================================================================
      kasan: CONFIG_KASAN_INLINE enabled
      kasan: GPF could be caused by NULL-ptr deref or user memory access
      general protection fault: 0000 [#1] PREEMPT SMP KASAN
      CPU: 0 PID: 9844 Comm: syz-executor.0 Not tainted 5.4.0-syzkaller #0
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
      Google 01/01/2011
      RIP: 0010:__lock_acquire+0x1254/0x4a00 kernel/locking/lockdep.c:3828
      Code: 00 0f 85 96 24 00 00 48 81 c4 f0 00 00 00 5b 41 5c 41 5d 41 5e 41
      5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02
      00 0f 85 0b 28 00 00 49 81 3e 20 19 78 8a 0f 84 5f ee ff
      RSP: 0018:ffff888099c3fb48 EFLAGS: 00010006
      RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
      RDX: 0000000000000218 RSI: 0000000000000000 RDI: 0000000000000001
      RBP: ffff888099c3fc60 R08: 0000000000000001 R09: 0000000000000001
      R10: fffffbfff146e1d0 R11: ffff888098720400 R12: 00000000000010c0
      R13: 0000000000000000 R14: 00000000000010c0 R15: 0000000000000000
      FS:  00007f0559e98700(0000) GS:ffff8880ae800000(0000)
      knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 00007fe4d89e0000 CR3: 0000000099606000 CR4: 00000000001406f0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      Call Trace:
       lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
       __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
       _raw_spin_lock_bh+0x33/0x50 kernel/locking/spinlock.c:175
       spin_lock_bh include/linux/spinlock.h:343 [inline]
       j1939_jsk_del+0x32/0x210 net/can/j1939/socket.c:89
       j1939_sk_bind+0x2ea/0x8f0 net/can/j1939/socket.c:448
       __sys_bind+0x239/0x290 net/socket.c:1648
       __do_sys_bind net/socket.c:1659 [inline]
       __se_sys_bind net/socket.c:1657 [inline]
       __x64_sys_bind+0x73/0xb0 net/socket.c:1657
       do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x45a679
      Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89
      f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
      f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007f0559e97c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
      RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000045a679
      RDX: 0000000000000018 RSI: 0000000020000240 RDI: 0000000000000003
      RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0559e986d4
      R13: 00000000004c09e9 R14: 00000000004d37d0 R15: 00000000ffffffff
      Modules linked in:
      ------------[ cut here ]------------
      WARNING: CPU: 0 PID: 9844 at kernel/locking/mutex.c:1419
      mutex_trylock+0x279/0x2f0 kernel/locking/mutex.c:1427
      ===============================================================================
      
      This issues was caused by null pointer deference. Where j1939_sk_bind()
      was using currently not existing priv.
      
      Possible scenario may look as following:
      cpu0                                    cpu1
      bind()
                                              bind()
       j1939_sk_bind()
                                               j1939_sk_bind()
        priv = jsk->priv;
                                               priv = jsk->priv;
        lock_sock(sock->sk);
        priv = j1939_netdev_start(ndev);
        j1939_jsk_add(priv, jsk);
          jsk->priv = priv;
        relase_sock(sock->sk);
                                               lock_sock(sock->sk);
                                               j1939_jsk_del(priv, jsk);
                                               ..... ooops ......
      
      With this patch we move "priv = jsk->priv;" after the lock, to avoid
      assigning of wrong priv pointer.
      
      Reported-by: syzbot+99e9e1b200a1e363237d@syzkaller.appspotmail.com
      Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
      Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
      Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      00d4e14d
    • Dan Murphy's avatar
      MAINTAINERS: Add myself as a maintainer for TCAN4x5x · 1a2e9d2f
      Dan Murphy authored
      Adding myself to support the TI TCAN4X5X SPI CAN device.
      Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      1a2e9d2f
    • Dan Murphy's avatar
      MAINTAINERS: Add myself as a maintainer for MMIO m_can · fd230ffa
      Dan Murphy authored
      Since I refactored the code to create a m_can framework and we
      have a MMIO MCAN IP as well add myself to help maintain the code.
      Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      fd230ffa
  2. 07 Dec, 2019 22 commits
    • Heiner Kallweit's avatar
      r8169: fix rtl_hw_jumbo_disable for RTL8168evl · 0fc75219
      Heiner Kallweit authored
      In referenced fix we removed the RTL8168e-specific jumbo config for
      RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in
      rtl_hw_jumbo_disable().
      
      v2: fix referenced commit id
      
      Fixes: 14012c9f ("r8169: fix jumbo configuration for RTL8168evl")
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0fc75219
    • Eric Dumazet's avatar
      net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() · 2dd5616e
      Eric Dumazet authored
      Use the new tcf_proto_check_kind() helper to make sure user
      provided value is well formed.
      
      BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:606 [inline]
      BUG: KMSAN: uninit-value in string+0x4be/0x600 lib/vsprintf.c:668
      CPU: 0 PID: 12358 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x1c9/0x220 lib/dump_stack.c:118
       kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
       __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
       string_nocheck lib/vsprintf.c:606 [inline]
       string+0x4be/0x600 lib/vsprintf.c:668
       vsnprintf+0x218f/0x3210 lib/vsprintf.c:2510
       __request_module+0x2b1/0x11c0 kernel/kmod.c:143
       tcf_proto_lookup_ops+0x171/0x700 net/sched/cls_api.c:139
       tc_chain_tmplt_add net/sched/cls_api.c:2730 [inline]
       tc_ctl_chain+0x1904/0x38a0 net/sched/cls_api.c:2850
       rtnetlink_rcv_msg+0x115a/0x1580 net/core/rtnetlink.c:5224
       netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
       rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5242
       netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
       netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1328
       netlink_sendmsg+0x110f/0x1330 net/netlink/af_netlink.c:1917
       sock_sendmsg_nosec net/socket.c:637 [inline]
       sock_sendmsg net/socket.c:657 [inline]
       ___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
       __sys_sendmsg net/socket.c:2356 [inline]
       __do_sys_sendmsg net/socket.c:2365 [inline]
       __se_sys_sendmsg+0x305/0x460 net/socket.c:2363
       __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
       do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
       entry_SYSCALL_64_after_hwframe+0x44/0xa9
      RIP: 0033:0x45a649
      Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007f0790795c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
      RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000045a649
      RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000006
      RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000246 R12: 00007f07907966d4
      R13: 00000000004c8db5 R14: 00000000004df630 R15: 00000000ffffffff
      
      Uninit was created at:
       kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
       kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
       kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
       slab_alloc_node mm/slub.c:2773 [inline]
       __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
       __kmalloc_reserve net/core/skbuff.c:141 [inline]
       __alloc_skb+0x306/0xa10 net/core/skbuff.c:209
       alloc_skb include/linux/skbuff.h:1049 [inline]
       netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline]
       netlink_sendmsg+0x783/0x1330 net/netlink/af_netlink.c:1892
       sock_sendmsg_nosec net/socket.c:637 [inline]
       sock_sendmsg net/socket.c:657 [inline]
       ___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311
       __sys_sendmsg net/socket.c:2356 [inline]
       __do_sys_sendmsg net/socket.c:2365 [inline]
       __se_sys_sendmsg+0x305/0x460 net/socket.c:2363
       __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2363
       do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
       entry_SYSCALL_64_after_hwframe+0x44/0xa9
      
      Fixes: 6f96c3c6 ("net_sched: fix backward compatibility for TCA_KIND")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Acked-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Cc: Jamal Hadi Salim <jhs@mojatatu.com>
      Cc: Jiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2dd5616e
    • Heiner Kallweit's avatar
      r8169: add missing RX enabling for WoL on RTL8125 · 00222d13
      Heiner Kallweit authored
      RTL8125 also requires to enable RX for WoL.
      
      v2: add missing Fixes tag
      
      Fixes: f1bce4ad ("r8169: add support for RTL8125")
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      00222d13
    • Stefano Garzarella's avatar
      vhost/vsock: accept only packets with the right dst_cid · 8a3cc29c
      Stefano Garzarella authored
      When we receive a new packet from the guest, we check if the
      src_cid is correct, but we forgot to check the dst_cid.
      
      The host should accept only packets where dst_cid is
      equal to the host CID.
      Signed-off-by: default avatarStefano Garzarella <sgarzare@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8a3cc29c
    • Grygorii Strashko's avatar
      net: phy: dp83867: fix hfs boot in rgmii mode · fafc5db2
      Grygorii Strashko authored
      The commit ef87f7da ("net: phy: dp83867: move dt parsing to probe")
      causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is
      used in "rgmii-id" mode - the networking stops working.
      Unfortunately, it's not enough to just move DT parsing code to .probe() as
      it depends on phydev->interface value, which is set to correct value abter
      the .probe() is completed and before calling .config_init(). So, RGMII
      configuration can't be loaded from DT.
      
      To fix and issue
      - move RGMII validation code to .config_init()
      - parse RGMII parameters in dp83867_of_init(), but consider them as
      optional.
      
      Fixes: ef87f7da ("net: phy: dp83867: move dt parsing to probe")
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fafc5db2
    • Grygorii Strashko's avatar
      net: ethernet: ti: cpsw: fix extra rx interrupt · 51302f77
      Grygorii Strashko authored
      Now RX interrupt is triggered twice every time, because in
      cpsw_rx_interrupt() it is asked first and then disabled. So there will be
      pending interrupt always, when RX interrupt is enabled again in NAPI
      handler.
      
      Fix it by first disabling IRQ and then do ask.
      
      Fixes: 870915fe ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself")
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      51302f77
    • Eric Dumazet's avatar
      inet: protect against too small mtu values. · 501a90c9
      Eric Dumazet authored
      syzbot was once again able to crash a host by setting a very small mtu
      on loopback device.
      
      Let's make inetdev_valid_mtu() available in include/net/ip.h,
      and use it in ip_setup_cork(), so that we protect both ip_append_page()
      and __ip_append_data()
      
      Also add a READ_ONCE() when the device mtu is read.
      
      Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
      even if other code paths might write over this field.
      
      Add a big comment in include/linux/netdevice.h about dev->mtu
      needing READ_ONCE()/WRITE_ONCE() annotations.
      
      Hopefully we will add the missing ones in followup patches.
      
      [1]
      
      refcount_t: saturated; leaking memory.
      WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
      Kernel panic - not syncing: panic_on_warn set ...
      CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x197/0x210 lib/dump_stack.c:118
       panic+0x2e3/0x75c kernel/panic.c:221
       __warn.cold+0x2f/0x3e kernel/panic.c:582
       report_bug+0x289/0x300 lib/bug.c:195
       fixup_bug arch/x86/kernel/traps.c:174 [inline]
       fixup_bug arch/x86/kernel/traps.c:169 [inline]
       do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
       do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
       invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
      RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
      Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
      RSP: 0018:ffff88809689f550 EFLAGS: 00010286
      RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
      RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c
      RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1
      R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001
      R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40
       refcount_add include/linux/refcount.h:193 [inline]
       skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
       sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
       ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
       udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
       inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
       kernel_sendpage+0x92/0xf0 net/socket.c:3794
       sock_sendpage+0x8b/0xc0 net/socket.c:936
       pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
       splice_from_pipe_feed fs/splice.c:512 [inline]
       __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
       splice_from_pipe+0x108/0x170 fs/splice.c:671
       generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
       do_splice_from fs/splice.c:861 [inline]
       direct_splice_actor+0x123/0x190 fs/splice.c:1035
       splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
       do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
       do_sendfile+0x597/0xd00 fs/read_write.c:1464
       __do_sys_sendfile64 fs/read_write.c:1525 [inline]
       __se_sys_sendfile64 fs/read_write.c:1511 [inline]
       __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
       do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x441409
      Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
      RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409
      RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005
      RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010
      R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180
      R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000
      Kernel Offset: disabled
      Rebooting in 86400 seconds..
      
      Fixes: 1470ddf7 ("inet: Remove explicit write references to sk/inet in ip_append_data")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      501a90c9
    • Cong Wang's avatar
      gre: refetch erspan header from skb->data after pskb_may_pull() · 0e494092
      Cong Wang authored
      After pskb_may_pull() we should always refetch the header
      pointers from the skb->data in case it got reallocated.
      
      In gre_parse_header(), the erspan header is still fetched
      from the 'options' pointer which is fetched before
      pskb_may_pull().
      
      Found this during code review of a KMSAN bug report.
      
      Fixes: cb73ee40 ("net: ip_gre: use erspan key field for tunnel lookup")
      Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Acked-by: default avatarLorenzo Bianconi <lorenzo.bianconi@redhat.com>
      Acked-by: default avatarWilliam Tu <u9012063@gmail.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0e494092
    • Aditya Pakki's avatar
      pppoe: remove redundant BUG_ON() check in pppoe_pernet · 02a896ca
      Aditya Pakki authored
      Passing NULL to pppoe_pernet causes a crash via BUG_ON.
      Dereferencing net in net_generici() also has the same effect. This patch
      removes the redundant BUG_ON check on the same parameter.
      Signed-off-by: default avatarAditya Pakki <pakki001@umn.edu>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      02a896ca
    • David S. Miller's avatar
      Merge branch 'tcp-fix-handling-of-stale-syncookies-timestamps' · 5532946e
      David S. Miller authored
      Guillaume Nault says:
      
      ====================
      tcp: fix handling of stale syncookies timestamps
      
      The synflood timestamps (->ts_recent_stamp and ->synq_overflow_ts) are
      only refreshed when the syncookie protection triggers. Therefore, their
      value can become very far apart from jiffies if no synflood happens for
      a long time.
      
      If jiffies grows too much and wraps while the synflood timestamp isn't
      refreshed, then time_after32() might consider the later to be in the
      future. This can trick tcp_synq_no_recent_overflow() into returning
      erroneous values and rejecting valid ACKs.
      
      Patch 1 handles the case of ACKs using legitimate syncookies.
      Patch 2 handles the case of stray ACKs.
      Patch 3 annotates lockless timestamp operations with READ_ONCE() and
      WRITE_ONCE().
      
      Changes from v3:
        - Fix description of time_between32() (found by Eric Dumazet).
        - Use more accurate Fixes tag in patch 3 (suggested by Eric Dumazet).
      
      Changes from v2:
        - Define and use time_between32() instead of a pair of
          time_before32/time_after32 (suggested by Eric Dumazet).
        - Use 'last_overflow - HZ' as lower bound in
          tcp_synq_no_recent_overflow(), to accommodate for concurrent
          timestamp updates (found by Eric Dumazet).
        - Add a third patch to annotate lockless accesses to .ts_recent_stamp.
      
      Changes from v1:
        - Initialising timestamps at socket creation time is not enough
          because jiffies wraps in 24 days with HZ=1000 (Eric Dumazet).
          Handle stale timestamps in tcp_synq_overflow() and
          tcp_synq_no_recent_overflow() instead.
        - Rework commit description.
        - Add a second patch to handle the case of stray ACKs.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5532946e
    • Guillaume Nault's avatar
      tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() · 721c8daf
      Guillaume Nault authored
      Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the
      timestamp of the last synflood. Protect them with READ_ONCE() and
      WRITE_ONCE() since reads and writes aren't serialised.
      
      Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was
      introduced by a0f82f64 ("syncookies: remove last_synq_overflow from
      struct tcp_sock"). But unprotected accesses were already there when
      timestamp was stored in .last_synq_overflow.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      721c8daf
    • Guillaume Nault's avatar
      tcp: tighten acceptance of ACKs not matching a child socket · cb44a08f
      Guillaume Nault authored
      When no synflood occurs, the synflood timestamp isn't updated.
      Therefore it can be so old that time_after32() can consider it to be
      in the future.
      
      That's a problem for tcp_synq_no_recent_overflow() as it may report
      that a recent overflow occurred while, in fact, it's just that jiffies
      has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31.
      
      Spurious detection of recent overflows lead to extra syncookie
      verification in cookie_v[46]_check(). At that point, the verification
      should fail and the packet dropped. But we should have dropped the
      packet earlier as we didn't even send a syncookie.
      
      Let's refine tcp_synq_no_recent_overflow() to report a recent overflow
      only if jiffies is within the
      [last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This
      way, no spurious recent overflow is reported when jiffies wraps and
      'last_overflow' becomes in the future from the point of view of
      time_after32().
      
      However, if jiffies wraps and enters the
      [last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with
      'last_overflow' being a stale synflood timestamp), then
      tcp_synq_no_recent_overflow() still erroneously reports an
      overflow. In such cases, we have to rely on syncookie verification
      to drop the packet. We unfortunately have no way to differentiate
      between a fresh and a stale syncookie timestamp.
      
      In practice, using last_overflow as lower bound is problematic.
      If the synflood timestamp is concurrently updated between the time
      we read jiffies and the moment we store the timestamp in
      'last_overflow', then 'now' becomes smaller than 'last_overflow' and
      tcp_synq_no_recent_overflow() returns true, potentially dropping a
      valid syncookie.
      
      Reading jiffies after loading the timestamp could fix the problem,
      but that'd require a memory barrier. Let's just accommodate for
      potential timestamp growth instead and extend the interval using
      'last_overflow - HZ' as lower bound.
      Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cb44a08f
    • Guillaume Nault's avatar
      tcp: fix rejected syncookies due to stale timestamps · 04d26e7b
      Guillaume Nault authored
      If no synflood happens for a long enough period of time, then the
      synflood timestamp isn't refreshed and jiffies can advance so much
      that time_after32() can't accurately compare them any more.
      
      Therefore, we can end up in a situation where time_after32(now,
      last_overflow + HZ) returns false, just because these two values are
      too far apart. In that case, the synflood timestamp isn't updated as
      it should be, which can trick tcp_synq_no_recent_overflow() into
      rejecting valid syncookies.
      
      For example, let's consider the following scenario on a system
      with HZ=1000:
      
        * The synflood timestamp is 0, either because that's the timestamp
          of the last synflood or, more commonly, because we're working with
          a freshly created socket.
      
        * We receive a new SYN, which triggers synflood protection. Let's say
          that this happens when jiffies == 2147484649 (that is,
          'synflood timestamp' + HZ + 2^31 + 1).
      
        * Then tcp_synq_overflow() doesn't update the synflood timestamp,
          because time_after32(2147484649, 1000) returns false.
          With:
            - 2147484649: the value of jiffies, aka. 'now'.
            - 1000: the value of 'last_overflow' + HZ.
      
        * A bit later, we receive the ACK completing the 3WHS. But
          cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow()
          says that we're not under synflood. That's because
          time_after32(2147484649, 120000) returns false.
          With:
            - 2147484649: the value of jiffies, aka. 'now'.
            - 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID.
      
          Of course, in reality jiffies would have increased a bit, but this
          condition will last for the next 119 seconds, which is far enough
          to accommodate for jiffie's growth.
      
      Fix this by updating the overflow timestamp whenever jiffies isn't
      within the [last_overflow, last_overflow + HZ] range. That shouldn't
      have any performance impact since the update still happens at most once
      per second.
      
      Now we're guaranteed to have fresh timestamps while under synflood, so
      tcp_synq_no_recent_overflow() can safely use it with time_after32() in
      such situations.
      
      Stale timestamps can still make tcp_synq_no_recent_overflow() return
      the wrong verdict when not under synflood. This will be handled in the
      next patch.
      
      For 64 bits architectures, the problem was introduced with the
      conversion of ->tw_ts_recent_stamp to 32 bits integer by commit
      cca9bab1 ("tcp: use monotonic timestamps for PAWS").
      The problem has always been there on 32 bits architectures.
      
      Fixes: cca9bab1 ("tcp: use monotonic timestamps for PAWS")
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04d26e7b
    • David S. Miller's avatar
      Merge tag 'mlx5-fixes-2019-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · 537d0779
      David S. Miller authored
      Saeed Mahameed says:
      
      ====================
      Mellanox, mlx5 fixes 2019-12-05
      
      This series introduces some fixes to mlx5 driver.
      
      Please pull and let me know if there is any problem.
      
      For -stable v4.19:
       ('net/mlx5e: Query global pause state before setting prio2buffer')
      
      For -stable v5.3
       ('net/mlx5e: Fix SFF 8472 eeprom length')
       ('net/mlx5e: Fix translation of link mode into speed')
       ('net/mlx5e: Fix freeing flow with kfree() and not kvfree()')
       ('net/mlx5e: ethtool, Fix analysis of speed setting')
       ('net/mlx5e: Fix TXQ indices to be sequential')
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      537d0779
    • Bruno Carneiro da Cunha's avatar
      lpc_eth: kernel BUG on remove · 04aa1bc4
      Bruno Carneiro da Cunha authored
      We may have found a bug in the nxp/lpc_eth.c driver. The function
      platform_set_drvdata() is called twice, the second time it is called,
      in lpc_mii_init(), it overwrites the struct net_device which should be
      at pdev->dev->driver_data with pldat->mii_bus. When trying to remove
      the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will
      return the pldat->mii_bus pointer and try to use it as a struct
      net_device pointer. This causes unregister_netdev to segfault and
      generate a kernel BUG. Is this reproducible?
      Signed-off-by: default avatarDaniel Martinez <linux@danielsmartinez.com>
      Signed-off-by: default avatarBruno Carneiro da Cunha <brunocarneirodacunha@usp.br>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04aa1bc4
    • Eric Dumazet's avatar
      tcp: md5: fix potential overestimation of TCP option space · 9424e2e7
      Eric Dumazet authored
      Back in 2008, Adam Langley fixed the corner case of packets for flows
      having all of the following options : MD5 TS SACK
      
      Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block
      can be cooked from the remaining 8 bytes.
      
      tcp_established_options() correctly sets opts->num_sack_blocks
      to zero, but returns 36 instead of 32.
      
      This means TCP cooks packets with 4 extra bytes at the end
      of options, containing unitialized bytes.
      
      Fixes: 33ad798c ("tcp: options clean up")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Acked-by: default avatarNeal Cardwell <ncardwell@google.com>
      Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9424e2e7
    • David S. Miller's avatar
      Merge branch 'net-tc-indirect-block-relay' · 9a74542e
      David S. Miller authored
      John Hurley says:
      
      ====================
      Ensure egress un/bind are relayed with indirect blocks
      
      On register and unregister for indirect blocks, a command is called that
      sends a bind/unbind event to the registering driver. This command assumes
      that the bind to indirect block will be on ingress. However, drivers such
      as NFP have allowed binding to clsact qdiscs as well as ingress qdiscs
      from mainline Linux 5.2. A clsact qdisc binds to an ingress and an egress
      block.
      
      Rather than assuming that an indirect bind is always ingress, modify the
      function names to remove the ingress tag (patch 1). In cls_api, which is
      used by NFP to offload TC flower, generate bind/unbind message for both
      ingress and egress blocks on the event of indirectly
      registering/unregistering from that block. Doing so mimics the behaviour
      of both ingress and clsact qdiscs on initialise and destroy.
      
      This now ensures that drivers such as NFP receive the correct binder type
      for the indirect block registration.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9a74542e
    • John Hurley's avatar
      net: sched: allow indirect blocks to bind to clsact in TC · 25a443f7
      John Hurley authored
      When a device is bound to a clsact qdisc, bind events are triggered to
      registered drivers for both ingress and egress. However, if a driver
      registers to such a device using the indirect block routines then it is
      assumed that it is only interested in ingress offload and so only replays
      ingress bind/unbind messages.
      
      The NFP driver supports the offload of some egress filters when
      registering to a block with qdisc of type clsact. However, on unregister,
      if the block is still active, it will not receive an unbind egress
      notification which can prevent proper cleanup of other registered
      callbacks.
      
      Modify the indirect block callback command in TC to send messages of
      ingress and/or egress bind depending on the qdisc in use. NFP currently
      supports egress offload for TC flower offload so the changes are only
      added to TC.
      
      Fixes: 4d12ba42 ("nfp: flower: allow offloading of matches on 'internal' ports")
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25a443f7
    • John Hurley's avatar
      net: core: rename indirect block ingress cb function · dbad3408
      John Hurley authored
      With indirect blocks, a driver can register for callbacks from a device
      that is does not 'own', for example, a tunnel device. When registering to
      or unregistering from a new device, a callback is triggered to generate
      a bind/unbind event. This, in turn, allows the driver to receive any
      existing rules or to properly clean up installed rules.
      
      When first added, it was assumed that all indirect block registrations
      would be for ingress offloads. However, the NFP driver can, in some
      instances, support clsact qdisc binds for egress offload.
      
      Change the name of the indirect block callback command in flow_offload to
      remove the 'ingress' identifier from it. While this does not change
      functionality, a follow up patch will implement a more more generic
      callback than just those currently just supporting ingress offload.
      
      Fixes: 4d12ba42 ("nfp: flower: allow offloading of matches on 'internal' ports")
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dbad3408
    • Jouni Hogander's avatar
      net-sysfs: Call dev_hold always in netdev_queue_add_kobject · e0b60903
      Jouni Hogander authored
      Dev_hold has to be called always in netdev_queue_add_kobject.
      Otherwise usage count drops below 0 in case of failure in
      kobject_init_and_add.
      
      Fixes: b8eb7183 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
      Cc: David Miller <davem@davemloft.net>
      Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e0b60903
    • Alexander Lobakin's avatar
      net: dsa: fix flow dissection on Tx path · 8bef0af0
      Alexander Lobakin authored
      Commit 43e66528 ("net-next: dsa: fix flow dissection") added an
      ability to override protocol and network offset during flow dissection
      for DSA-enabled devices (i.e. controllers shipped as switch CPU ports)
      in order to fix skb hashing for RPS on Rx path.
      
      However, skb_hash() and added part of code can be invoked not only on
      Rx, but also on Tx path if we have a multi-queued device and:
       - kernel is running on UP system or
       - XPS is not configured.
      
      The call stack in this two cases will be like: dev_queue_xmit() ->
      __dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() ->
      skb_tx_hash() -> skb_get_hash().
      
      The problem is that skbs queued for Tx have both network offset and
      correct protocol already set up even after inserting a CPU tag by DSA
      tagger, so calling tag_ops->flow_dissect() on this path actually only
      breaks flow dissection and hashing.
      
      This can be observed by adding debug prints just before and right after
      tag_ops->flow_dissect() call to the related block of code:
      
      Before the patch:
      
      Rx path (RPS):
      
      [   19.240001] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
      [   19.244271] tag_ops->flow_dissect()
      [   19.247811] Rx: proto: 0x0800, nhoff: 8	/* ETH_P_IP */
      
      [   19.215435] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
      [   19.219746] tag_ops->flow_dissect()
      [   19.223241] Rx: proto: 0x0806, nhoff: 8	/* ETH_P_ARP */
      
      [   18.654057] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
      [   18.658332] tag_ops->flow_dissect()
      [   18.661826] Rx: proto: 0x8100, nhoff: 8	/* ETH_P_8021Q */
      
      Tx path (UP system):
      
      [   18.759560] Tx: proto: 0x0800, nhoff: 26	/* ETH_P_IP */
      [   18.763933] tag_ops->flow_dissect()
      [   18.767485] Tx: proto: 0x920b, nhoff: 34	/* junk */
      
      [   22.800020] Tx: proto: 0x0806, nhoff: 26	/* ETH_P_ARP */
      [   22.804392] tag_ops->flow_dissect()
      [   22.807921] Tx: proto: 0x920b, nhoff: 34	/* junk */
      
      [   16.898342] Tx: proto: 0x86dd, nhoff: 26	/* ETH_P_IPV6 */
      [   16.902705] tag_ops->flow_dissect()
      [   16.906227] Tx: proto: 0x920b, nhoff: 34	/* junk */
      
      After:
      
      Rx path (RPS):
      
      [   16.520993] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
      [   16.525260] tag_ops->flow_dissect()
      [   16.528808] Rx: proto: 0x0800, nhoff: 8	/* ETH_P_IP */
      
      [   15.484807] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
      [   15.490417] tag_ops->flow_dissect()
      [   15.495223] Rx: proto: 0x0806, nhoff: 8	/* ETH_P_ARP */
      
      [   17.134621] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
      [   17.138895] tag_ops->flow_dissect()
      [   17.142388] Rx: proto: 0x8100, nhoff: 8	/* ETH_P_8021Q */
      
      Tx path (UP system):
      
      [   15.499558] Tx: proto: 0x0800, nhoff: 26	/* ETH_P_IP */
      
      [   20.664689] Tx: proto: 0x0806, nhoff: 26	/* ETH_P_ARP */
      
      [   18.565782] Tx: proto: 0x86dd, nhoff: 26	/* ETH_P_IPV6 */
      
      In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)'
      to prevent code from calling tag_ops->flow_dissect() on Tx.
      I also decided to initialize 'offset' variable so tagger callbacks can
      now safely leave it untouched without provoking a chaos.
      
      Fixes: 43e66528 ("net-next: dsa: fix flow dissection")
      Signed-off-by: default avatarAlexander Lobakin <alobakin@dlink.ru>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8bef0af0
    • Valentin Vidic's avatar
      net/tls: Fix return values to avoid ENOTSUPP · 4a5cdc60
      Valentin Vidic authored
      ENOTSUPP is not available in userspace, for example:
      
        setsockopt failed, 524, Unknown error 524
      Signed-off-by: default avatarValentin Vidic <vvidic@valentin-vidic.from.hr>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4a5cdc60
  3. 06 Dec, 2019 7 commits
    • Eric Dumazet's avatar
      net: avoid an indirect call in ____sys_recvmsg() · 1af66221
      Eric Dumazet authored
      CONFIG_RETPOLINE=y made indirect calls expensive.
      
      gcc seems to add an indirect call in ____sys_recvmsg().
      
      Rewriting the code slightly makes sure to avoid this indirection.
      
      Alternative would be to not call sock_recvmsg() and instead
      use security_socket_recvmsg() and sock_recvmsg_nosec(),
      but this is less readable IMO.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Paolo Abeni <pabeni@redhat.com>
      Cc: David Laight <David.Laight@aculab.com>
      Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1af66221
    • Chuhong Yuan's avatar
      phy: mdio-thunder: add missed pci_release_regions in remove · 462f8554
      Chuhong Yuan authored
      The driver forgets to call pci_release_regions() in remove like that
      in probe failure.
      Add the missed call to fix it.
      Signed-off-by: default avatarChuhong Yuan <hslester96@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      462f8554
    • Taehee Yoo's avatar
      tipc: fix ordering of tipc module init and exit routine · 9cf1cd8e
      Taehee Yoo authored
      In order to set/get/dump, the tipc uses the generic netlink
      infrastructure. So, when tipc module is inserted, init function
      calls genl_register_family().
      After genl_register_family(), set/get/dump commands are immediately
      allowed and these callbacks internally use the net_generic.
      net_generic is allocated by register_pernet_device() but this
      is called after genl_register_family() in the __init function.
      So, these callbacks would use un-initialized net_generic.
      
      Test commands:
          #SHELL1
          while :
          do
              modprobe tipc
              modprobe -rv tipc
          done
      
          #SHELL2
          while :
          do
              tipc link list
          done
      
      Splat looks like:
      [   59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled
      [   59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access
      [   59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
      [   59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194
      [   59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
      [   59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc]
      [   59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00
      [   59.622550][ T2780] NET: Registered protocol family 30
      [   59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202
      [   59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907
      [   59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149
      [   59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1
      [   59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40
      [   59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328
      [   59.624639][ T2788] FS:  00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
      [   59.624645][ T2788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [   59.625875][ T2780] tipc: Started in single node mode
      [   59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0
      [   59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [   59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [   59.636478][ T2788] Call Trace:
      [   59.637025][ T2788]  tipc_nl_add_bc_link+0x179/0x1470 [tipc]
      [   59.638219][ T2788]  ? lock_downgrade+0x6e0/0x6e0
      [   59.638923][ T2788]  ? __tipc_nl_add_link+0xf90/0xf90 [tipc]
      [   59.639533][ T2788]  ? tipc_nl_node_dump_link+0x318/0xa50 [tipc]
      [   59.640160][ T2788]  ? mutex_lock_io_nested+0x1380/0x1380
      [   59.640746][ T2788]  tipc_nl_node_dump_link+0x4fd/0xa50 [tipc]
      [   59.641356][ T2788]  ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc]
      [   59.642088][ T2788]  ? __skb_ext_del+0x270/0x270
      [   59.642594][ T2788]  genl_lock_dumpit+0x85/0xb0
      [   59.643050][ T2788]  netlink_dump+0x49c/0xed0
      [   59.643529][ T2788]  ? __netlink_sendskb+0xc0/0xc0
      [   59.644044][ T2788]  ? __netlink_dump_start+0x190/0x800
      [   59.644617][ T2788]  ? __mutex_unlock_slowpath+0xd0/0x670
      [   59.645177][ T2788]  __netlink_dump_start+0x5a0/0x800
      [   59.645692][ T2788]  genl_rcv_msg+0xa75/0xe90
      [   59.646144][ T2788]  ? __lock_acquire+0xdfe/0x3de0
      [   59.646692][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
      [   59.647340][ T2788]  ? genl_lock_dumpit+0xb0/0xb0
      [   59.647821][ T2788]  ? genl_unlock+0x20/0x20
      [   59.648290][ T2788]  ? genl_parallel_done+0xe0/0xe0
      [   59.648787][ T2788]  ? find_held_lock+0x39/0x1d0
      [   59.649276][ T2788]  ? genl_rcv+0x15/0x40
      [   59.649722][ T2788]  ? lock_contended+0xcd0/0xcd0
      [   59.650296][ T2788]  netlink_rcv_skb+0x121/0x350
      [   59.650828][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
      [   59.651491][ T2788]  ? netlink_ack+0x940/0x940
      [   59.651953][ T2788]  ? lock_acquire+0x164/0x3b0
      [   59.652449][ T2788]  genl_rcv+0x24/0x40
      [   59.652841][ T2788]  netlink_unicast+0x421/0x600
      [ ... ]
      
      Fixes: 7e436905 ("tipc: fix a slab object leak")
      Fixes: a62fbcce ("tipc: make subscriber server support net namespace")
      Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
      Acked-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9cf1cd8e
    • Vladyslav Tarasiuk's avatar
      mqprio: Fix out-of-bounds access in mqprio_dump · 9f104c77
      Vladyslav Tarasiuk authored
      When user runs a command like
      tc qdisc add dev eth1 root mqprio
      KASAN stack-out-of-bounds warning is emitted.
      Currently, NLA_ALIGN macro used in mqprio_dump provides too large
      buffer size as argument for nla_put and memcpy down the call stack.
      The flow looks like this:
      1. nla_put expects exact object size as an argument;
      2. Later it provides this size to memcpy;
      3. To calculate correct padding for SKB, nla_put applies NLA_ALIGN
         macro itself.
      
      Therefore, NLA_ALIGN should not be applied to the nla_put parameter.
      Otherwise it will lead to out-of-bounds memory access in memcpy.
      
      Fixes: 4e8b86c0 ("mqprio: Introduce new hardware offload mode and shaper in mqprio")
      Signed-off-by: default avatarVladyslav Tarasiuk <vladyslavt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9f104c77
    • Jongsung Kim's avatar
      net: stmmac: reset Tx desc base address before restarting Tx · f421031e
      Jongsung Kim authored
      Refer to the databook of DesignWare Cores Ethernet MAC Universal:
      
      6.2.1.5 Register 4 (Transmit Descriptor List Address Register
      
      If this register is not changed when the ST bit is set to 0, then
      the DMA takes the descriptor address where it was stopped earlier.
      
      The stmmac_tx_err() does zero indices to Tx descriptors, but does
      not reset HW current Tx descriptor address. To fix inconsistency,
      the base address of the Tx descriptors should be rewritten before
      restarting Tx.
      Signed-off-by: default avatarJongsung Kim <neidhard.kim@lge.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f421031e
    • Yangbo Lu's avatar
      enetc: disable EEE autoneg by default · a6a10d45
      Yangbo Lu authored
      The EEE support has not been enabled on ENETC, but it may connect
      to a PHY which supports EEE and advertises EEE by default, while
      its link partner also advertises EEE. If this happens, the PHY enters
      low power mode when the traffic rate is low and causes packet loss.
      This patch disables EEE advertisement by default for any PHY that
      ENETC connects to, to prevent the above unwanted outcome.
      Signed-off-by: default avatarYangbo Lu <yangbo.lu@nxp.com>
      Reviewed-by: default avatarClaudiu Manoil <claudiu.manoil@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a6a10d45
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · ae72555b
      David S. Miller authored
      Alexei Starovoitov says:
      
      ====================
      pull-request: bpf 2019-12-05
      
      The following pull-request contains BPF updates for your *net* tree.
      
      We've added 6 non-merge commits during the last 1 day(s) which contain
      a total of 14 files changed, 116 insertions(+), 37 deletions(-).
      
      The main changes are:
      
      1) three selftests fixes, from Stanislav.
      
      2) one samples fix, from Jesper.
      
      3) one verifier fix, from Yonghong.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ae72555b
  4. 05 Dec, 2019 6 commits