- 13 Feb, 2007 40 commits
-
-
Jan Beulich authored
Remove all parameters from this function that aren't really variable. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Randy Dunlap authored
List x86_64 quilt tree in MAINTAINERS. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andi Kleen <ak@suse.de>
-
Randy Dunlap authored
Fix typos. Lots of whitespace changes for readability and consistency. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Venkatesh Pallipadi authored
Handle these 32 bit perfmon counter MSR writes cleanly in oprofile. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Venkatesh Pallipadi authored
Change i386 nmi handler to handle 32 bit perfmon counter MSR writes cleanly. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Venkatesh Pallipadi authored
P6 CPUs and Core/Core 2 CPUs which has 'architectural perf mon' feature, only supports write of low 32 bits in Performance Monitoring Counters. Bits 32..39 are sign extended based on bit 31 and bits 40..63 are reserved and should be zero. This patch: Change x86_64 nmi handler to handle this case cleanly. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Glauber de Oliveira Costa authored
This is a tiny cleanup to increase readability Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Glauber de Oliveira Costa authored
Unlike x86, x86_64 already passes arguments in registers. The use of regparm attribute makes no difference in produced code, and the use of fastcall just bloats the code. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Rohit Seth authored
This patch resolves the issue of running with numa=fake=X on kernel command line on x86_64 machines that have big IO hole. While calculating the size of each node now we look at the total hole size in that range. Previously there were nodes that only had IO holes in them causing kernel boot problems. We now use the NODE_MIN_SIZE (64MB) as the minimum size of memory that any node must have. We reduce the number of allocated nodes if the number of nodes specified on kernel command line results in any node getting memory smaller than NODE_MIN_SIZE. This change allows the extra memory to be incremented in NODE_MIN_SIZE granule and uniformly distribute among as many nodes (called big nodes) as possible. [akpm@osdl.org: build fix] Signed-off-by: David Rientjes <reintjes@google.com> Signed-off-by: Paul Menage <menage@google.com> Signed-off-by: Rohit Seth <rohitseth@google.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Rene Herman authored
Use adding __init to romsignature() (it's only called from probe_roms() which is itself __init) as an excuse to submit a pedantic cleanup. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Ingo Molnar authored
Clean up sched_clock() on i686: it will use the TSC if available and falls back to jiffies only if the user asked for it to be disabled via notsc or the CPU calibration code didnt figure out the right cpu_khz. This generally makes the scheduler timestamps more finegrained, on all hardware. (the current scheduler is pretty resistant against asynchronous sched_clock() values on different CPUs, it will allow at most up to a jiffy of jitter.) Also simplify sched_clock()'s check for TSC availability: propagate the desire and ability to use the TSC into the tsc_disable flag, previously this flag only indicated whether the notsc option was passed. This makes the rare low-res sched_clock() codepath a single branch off a read-mostly flag. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
-
Stephane Eranian authored
Add a notifier mechanism to the low level idle loop. You can register a callback function which gets invoked on entry and exit from the low level idle loop. The low level idle loop is defined as the polling loop, low-power call, or the mwait instruction. Interrupts processed by the idle thread are not considered part of the low level loop. The notifier can be used to measure precisely how much is spent in useless execution (or low power mode). The perfmon subsystem uses it to turn on/off monitoring. Signed-off-by: stephane eranian <eranian@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
-
Adrian Bunk authored
Every file should include the headers containing the prototypes for it's global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
-
Vivek Goyal authored
o init() is a non __init function in .text section but it calls many functions which are in .init.text section. Hence MODPOST generates lots of cross reference warnings on i386 if compiled with CONFIG_RELOCATABLE=y WARNING: vmlinux - Section mismatch: reference to .init.text:smp_prepare_cpus from .text between 'init' (at offset 0xc0101049) and 'rest_init' WARNING: vmlinux - Section mismatch: reference to .init.text:migration_init from .text between 'init' (at offset 0xc010104e) and 'rest_init' WARNING: vmlinux - Section mismatch: reference to .init.text:spawn_ksoftirqd from .text between 'init' (at offset 0xc0101053) and 'rest_init' o This patch breaks down init() in two parts. One part which can go in .init.text section and can be freed and other part which has to be non __init(init_post()). Now init() calls init_post() and init_post() does not call any functions present in .init sections. Hence getting rid of warnings. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
-
Vivek Goyal authored
o Entry startup_32 was in .text section but it was accessing some init data too and it prompts MODPOST to generate compilation warnings. WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100029) and 'startup_32_smp' WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100037) and 'startup_32_smp' WARNING: vmlinux - Section mismatch: reference to .init.data:init_pg_tables_end from .text between '_text' (at offset 0xc0100099) and 'startup_32_smp' o Can't move startup_32 to .init.text as this entry point has to be at the start of bzImage. Hence moved startup_32 to a new section .text.head and instructed MODPOST to not to generate warnings if init data is being accessed from .text.head section. This code has been audited. o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug is not supported. Otherwise it generates more warnings WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from .text between 'checkCPUtype' (at offset 0xc0100126) and 'is486' WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from .text between 'checkCPUtype' (at offset 0xc0100130) and 'is486' Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
-
Zachary Amsden authored
Deliberate register clobber around performance critical inline code is great for testing, bad to leave on by default. Many people ship with DEBUG_KERNEL turned on, so stop making DEBUG_PARAVIRT default on. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Zachary Amsden authored
Because timer code moves around, and we might eventually move our init to a late_time_init hook, save and restore IRQs around this code because it is definitely not interrupt safe. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Zachary Amsden authored
Kprobes bugfix for paravirt compatibility - RPL on the CS when inserting BPs must match running kernel. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> CC: Eric Biederman <ebiederm@xmission.com>
-
Zachary Amsden authored
Profile_pc was broken when using paravirtualization because the assumption the kernel was running at CPL 0 was violated, causing bad logic to read a random value off the stack. The only way to be in kernel lock functions is to be in kernel code, so validate that assumption explicitly by checking the CS value. We don't want to be fooled by BIOS / APM segments and try to read those stacks, so only match KERNEL_CS. I moved some stuff in segment.h to make it prettier. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Zachary Amsden authored
VMI timer code. It works by taking over the local APIC clock when APIC is configured, which requires a couple hooks into the APIC code. The backend timer code could be commonized into the timer infrastructure, but there are some pieces missing (stolen time, in particular), and the exact semantics of when to do accounting for NO_IDLE need to be shared between different hypervisors as well. So for now, VMI timer is a separate module. [Adrian Bunk: cleanups] Subject: VMI timer patches Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Zachary Amsden authored
Fairly straightforward implementation of VMI backend for paravirt-ops. [Adrian Bunk: some cleanups] Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Zachary Amsden authored
Add VMI SMP boot hook. We emulate a regular boot sequence and use the same APIC IPI initiation, we just poke magic values to load into the CPU state when the startup IPI is received, rather than having to jump through a real mode trampoline. This is all that was needed to get SMP to work. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Zachary Amsden authored
I found a clever way to make the extra IOPL switching invisible to non-paravirt compiles - since kernel_rpl is statically defined to be zero there, and only non-zero rpl kernel have a problem restoring IOPL, as popf does not restore IOPL flags unless run at CPL-0. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Zachary Amsden authored
The VMI ROM has a mode where hypercalls can be queued and batched. This turns out to be a significant win during context switch, but must be done at a specific point before side effects to CPU state are visible to subsequent instructions. This is similar to the MMU batching hooks already provided. The same hooks could be used by the Xen backend to implement a context switch multicall. To explain a bit more about lazy modes in the paravirt patches, basically, the idea is that only one of lazy CPU or MMU mode can be active at any given time. Lazy MMU mode is similar to this lazy CPU mode, and allows for batching of multiple PTE updates (say, inside a remap loop), but to avoid keeping some kind of state machine about when to flush cpu or mmu updates, we just allow one or the other to be active. Although there is no real reason a more comprehensive scheme could not be implemented, there is also no demonstrated need for this extra complexity. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Zachary Amsden authored
The VMI backend uses explicit page type notification to track shadow page tables. The allocation of page table roots is especially tricky. We need to clone the root for non-PAE mode while it is protected under the pgd lock to correctly copy the shadow. We don't need to allocate pgds in PAE mode, (PDPs in Intel terminology) as they only have 4 entries, and are cached entirely by the processor, which makes shadowing them rather simple. For base page table level allocation, pmd_populate provides the exact hook point we need. Also, we need to allocate pages when splitting a large page, and we must release pages before returning the page to any free pool. Despite being required with these slightly odd semantics for VMI, Xen also uses these hooks to determine the exact moment when page tables are created or released. AK: All nops for other architectures Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Adrian Bunk authored
Every file should #include the headers containing the prototypes for its global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
-
Catalin Marinas authored
It makes more sense to end the stack trace with ULONG_MAX only if nr_entries < max_entries. Otherwise, we lose one entry in the long stack traces and cannot know whether the trace was complete or not. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Karsten Weiss authored
- add SWIOTLB config help text - mention Documentation/x86_64/boot-options.txt in Documentation/kernel-parameters.txt - remove the duplication of the iommu kernel parameter documentation. - Better explanation of some of the iommu kernel parameter options. - "32MB<<order" instead of "32MB^order". - Mention the default "order" value. - list the four existing PCI-DMA mapping implementations of arch x86_64 - group the iommu= option keywords by PCI-DMA mapping implementation. - Distinguish iommu= option keywords from number arguments. - Explain the meaning of DAC and SAC. Signed-off-by: Karsten Weiss <knweiss@science-computing.de> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Eric Dumazet authored
ARCH_HAVE_XTIME_LOCK is used by x86_64 arch . This arch needs to place a read only copy of xtime_lock into vsyscall page. This read only copy is named __xtime_lock, and xtime_lock is defined in arch/x86_64/kernel/vmlinux.lds.S as an alias. So the declaration of xtime_lock in kernel/timer.c was guarded by ARCH_HAVE_XTIME_LOCK define, defined to true on x86_64. We can get same result with _attribute__((weak)) in the declaration. linker should do the job. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
OGAWA Hirofumi authored
This is just cleanup. It moves to e820 check into pci_mmcfg_reject_broken(). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
-
OGAWA Hirofumi authored
Currently, unreachable_devices() compares value of mmconfig and value of conf1. But it doesn't check the device is reachable or not. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
-
OGAWA Hirofumi authored
This just cleans up. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
-
OGAWA Hirofumi authored
MMCONFIG_APER_XXX is unneeded in arch/x86_64/pci/mmconfig.c. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
-
OGAWA Hirofumi authored
This rejects broken MCFG tables on Asus. When the table looks bogus just disable mmconfig Arjan and Andi suggested this. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de>
-
OGAWA Hirofumi authored
Current mmconfig has some problems of remapped range. a) In the case of broken MCFG tables on Asus etc., we need to remap 256M range, but currently only remap 1M. b) The base address always corresponds to bus number 0, but currently we are assuming it corresponds to start bus number. This patch fixes the above problems. (akpm: Arjan suggests that if the MCFG table is broken we just shouldn't use it, rather than try to work around things). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Olivier Galibert authored
Put back the resource reservation as per 4c6e052a but use it *only* when the range(s) come from a chipset probe instead of the bios. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Olivier Galibert authored
It seems that the only way to reliably support mmconfig in the presence of funky biosen is to detect the hostbridge and read where the window is mapped from its registers. Do that for the E7520 and the 945G/GZ/P/PL for a start. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Olivier Galibert authored
unreachable_devices compares between the results of pci configuration accesses through type1 and mmconfig, so it should be called only if type1 actually works in the first place. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Olivier Galibert authored
i386 and x86-64 pci mmconfig code have a lot in common. So share what's shareable between the two. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Maciej W. Rozycki authored
The "fasteoi" IRQ handler is named "fasteio" incorrectly. This is a fix. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-