- 30 Jan, 2008 39 commits
-
-
Chuck Lever authored
The two arguments of rpc_depopulate() that pass in inode numbers should use the same type as inode->i_ino: unsigned long. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
The return type of xdr_skb_read_actor functions is size_t. This fixes a nit I unwittingly overlooked in commit dd456471. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Minor: Replace an empty if statement with a debugging dprintk. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Thomas Talpey <Thomas.Talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Nit: rl_nchunks is an unsigned integer, so pass it into rpcrdma_count_chunks() via an unsigned integer argument. This eliminates a harmless mixed sign comparison in rpcrdma_count_chunks() Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Thomas Talpey <Thomas.Talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Keep the type of the buffer position the same during iovec conversion to reduce the likelihood of unexpected results from comparisons and length computations. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Thomas Talpey <Thomas.Talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Now that we've killed off all the users. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Replace use of rpc_call_setup() with rpc_init_task(), and in cases where we need to initialise task->tk_action, with rpc_call_start(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Move the common code for setting up the nfs_write_data and nfs_read_data structures into fs/nfs/read.c, fs/nfs/write.c and fs/nfs/direct.c. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
In preparation for the removal of rpc_call_setup(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
To ensure that the RPCSEC_GSS upcall is performed with the correct sigmask. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
We want the default scheduling priority (priority == 0) to remain RPC_PRIORITY_NORMAL. Also ensure that the priority wait queue scheduling is per process id instead of sometimes being per thread, and sometimes being per inode. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Make it use the new task initialiser structure instead of acting as a wrapper. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
The sunrpc client exports are not meant to be part of any official kernel API: they can change at the drop of a hat. Mark them as internal functions using EXPORT_SYMBOL_GPL. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Do this for all RPC client related functions and XDR functions. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
J. Bruce Fields authored
Add kerneldoc comments for the rpc_pipefs.c functions that are exported. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
If we've disconnected from the server, rather than the other way round, then it makes little sense to wait 3 seconds before reconnecting. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
xprt_disconnect() should really only be called when the transport shutdown is completed, and it is time to wake up any pending tasks. Rename it to xprt_disconnect_done() in order to reflect the semantical change. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Move the calls to xprt_disconnect() over to xprt_force_disconnect() in order to enable the transport layer to manage the state of the XPRT_CONNECTED flag. Ditto in xs_tcp_read_fraghdr(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
The transport layer should do that itself whenever appropriate. Note that the RDMA transport already assumes that it needs to call xprt_disconnect in xprt_rdma_close(). For TCP sockets, we want to call xprt_disconnect() only after the connection has been closed by both ends. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
By using shutdown() rather than close() we allow the RPC client to wait for the TCP close handshake to complete before we start trying to reconnect using the same port. We use shutdown(SHUT_WR) only instead of shutting down both directions, however we wait until the server has closed the connection on its side. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Add an xprt->state bit to enable the TCP ->state_change() method to signal whether or not the TCP connection is in the process of closing down. This will to be used by the reconnection logic in a separate patch. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Currently the TCP rebinding logic assumes that if we're not using a reserved port, then we don't need to reconnect on the same port if a disconnection event occurs. This breaks most RPC duplicate reply cache implementations. Also take into account the fact that xprt_min_resvport and xprt_max_resvport may change while we're reconnecting, since the user may change them at any time via the sysctls. Ensure that we check the port boundaries every time we loop in xs_bind4/xs_bind6. Also ensure that if the boundaries change, we only scan the ports a maximum of 2 times. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
When scheduling the autoclose RPC call, we want to ensure that we don't race against the test_bit() call in xprt_clear_locked(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Steve Dickson authored
Added an active/deactive mechanism to the nfs_server structure allowing async operations to hold off umount until the operations are done. Signed-off-by: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Reduce the time spent locking the rpc_sequence structure by queuing the nfs_seqid only when we are ready to take the lock (when calling nfs_wait_on_sequence). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Ensure that we set/clear NFS_PAGE_TAG_LOCKED when the nfs_page is hashed. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
The current model locks the page twice for no good reason. Optimise by inlining the parts of nfs_write_begin()/nfs_write_end() that we care about. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
If the server returns an ENOENT error, we still need to do a d_delete() in order to ensure that the dentry is deleted. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
In nfs_do_call_unlink() we check that we haven't raced, and that lookup() hasn't created an aliased dentry to our sillydeleted dentry. If somebody has deleted the file on the server and the lookup() resulted in a negative dentry, then ignore... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Ensure that readdir revalidates its data cache after blocking on sillyrename. Also fix a typo in nfs_do_call_unlink(): swap the ^= for an |=. The result is the same, since we've already checked that the flag is unset, but it makes the code more readable. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 Jan, 2008 1 commit
-
-
Linus Torvalds authored
The new e1000e driver is apparently not yet suitable for general use, so mark it experimental, and re-instate all the PCI-Express device IDs in the old and stable e1000 driver so that people (namely me) can continue to use a driver that actually works. Auke & co have been appraised of the situation. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-