An error occurred fetching the project authors.
- 20 Oct, 2010 1 commit
-
-
Kyungmin Park authored
The selection PLAT_S5P is selected with plat-s5p/Kconfig. So remove it form each CPU_S5PXXXX config. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: edited title] Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
- 09 Aug, 2010 1 commit
-
-
Sylwester Nawrocki authored
Add support for FIMC on Samsung SMDKC100 board. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
- 06 Aug, 2010 1 commit
-
-
Banajit Goswami authored
This patch moves the dependency of watchdog timer driver from MACH_XXX(board) to ARCH_XXX(SoC). This will enable all machines using Samsung S3C64XX and S5P SoCs to use the WDT driver by default. Signed-off-by:
Banajit Goswami <banajit.g@samsung.com> Signed-off-by:
-
- 05 Aug, 2010 5 commits
-
-
Atul Dahiya authored
This patch adds support RTC driver for Samsung S5PC100. Signed-off-by:
Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by:
-
Naveen Krishna Ch authored
This patch is to support keypad device to the SMDKC100 board. Signed-off-by:
Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by:
-
Banajit Goswami authored
This patch adds support for Watchdog timer for Samsung S5PC100. Signed-off-by:
-
Naveen Krishna Ch authored
This patch adds touchscreen support for S5PC100. Signed-off-by:
-
Abhilash Kesavan authored
Following is added for the CF-ATA driver: - Platform data strucure instantiation - Platform device enabling code - Platform-specific gpio setup code Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by:
-
- 23 May, 2010 1 commit
-
-
Jassi Brar authored
Samsung's Soc S5PC100 has three PL330 DMACs. First is dedicated for Memory->Memory data transfer while the other two meant for data transfer with peripherals. Define and add latter two PL330 DMACs as platform devices on the S5PC100 platform. Signed-off-by:
Jassi Brar <jassi.brar@samsung.com> Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
- 20 May, 2010 3 commits
-
-
Marek Szyprowski authored
Signed-off-by:
-
Marek Szyprowski authored
This patch moves S5PC100 SoC support to plat-s5p framework. Most periperal support code has been already moved from plat-s5pc1xx to mach-s5pc100. Signed-off-by:
-
Marek Szyprowski authored
Move sdhci helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by:
-
- 19 May, 2010 2 commits
-
-
Marek Szyprowski authored
Move i2c helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by:
-
Marek Szyprowski authored
Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by:
-
- 01 Dec, 2009 4 commits
-
-
Kyungmin Park authored
Add required machine definitions for SDHCI controller 0, 1 and 2. SMDKC100 has 2 SDHCI/MMC ports. Port 1 is directly connected to controller 0. Port 1 can be conntected to controler 1 or 2, depending on jumper setup. Signed-off-by:
-
Kyungmin Park authored
Samsung S5PC100 has 3 SDHCI controllers compatible with the one known from previous SoCs series. Add required platform setup and support code that the devices can be used with sdhci-s3c driver. Signed-off-by:
-
Kyungmin Park authored
Add required machine definitions for I2C 0 and 1 bus controllers. Currently no I2C device are defined yet. Signed-off-by:
-
Kyungmin Park authored
Add required machine definitions for s3c-fb device. A 800x480 lcd device (simmilar to the one known from SMDK6410 boards) has been defined. The lcd controller is attached to GPIO lines and can be enabled/disabled with platform-lcd driver. Signed-off-by:
-
- 09 Nov, 2009 1 commit
-
-
Michael Roth authored
Additionally, some excessive newlines removed. Signed-off-by:
Michael Roth <mroth@nessie.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 16 Aug, 2009 1 commit
-
-
Byungho Min authored
S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100" Signed-off-by:
Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: tidy and edit description] Signed-off-by:
-
