1. 21 May, 2019 13 commits
  2. 19 May, 2019 17 commits
    • Linus Torvalds's avatar
      Linux 5.2-rc1 · a188339c
      Linus Torvalds authored
      a188339c
    • Linus Torvalds's avatar
      Merge tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs · 2e2c1220
      Linus Torvalds authored
      Pull UBIFS fixes from Richard Weinberger:
      
       - build errors wrt xattrs
      
       - mismerge which lead to a wrong Kconfig ifdef
      
       - missing endianness conversion
      
      * tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
        ubifs: Convert xattr inum to host order
        ubifs: Use correct config name for encryption
        ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR
      2e2c1220
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · cb6f8739
      Linus Torvalds authored
      Merge yet more updates from Andrew Morton:
       "A few final bits:
      
         - large changes to vmalloc, yielding large performance benefits
      
         - tweak the console-flush-on-panic code
      
         - a few fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        panic: add an option to replay all the printk message in buffer
        initramfs: don't free a non-existent initrd
        fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
        mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
        mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
        mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
        mm/vmalloc.c: keep track of free blocks for vmap allocation
      cb6f8739
    • Linus Torvalds's avatar
      Merge tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · ff8583d6
      Linus Torvalds authored
      Pull more Kbuild updates from Masahiro Yamada:
      
       - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption
      
       - exclude tracked files from .gitignore
      
       - re-enable -Wint-in-bool-context warning
      
       - refactor samples/Makefile
      
       - stop building immediately if syncconfig fails
      
       - do not sprinkle error messages when $(CC) does not exist
      
       - move arch/alpha/defconfig to the configs subdirectory
      
       - remove crappy header search path manipulation
      
       - add comment lines to .config to clarify the end of menu blocks
      
       - check uniqueness of module names (adding new warnings intentionally)
      
      * tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
        kconfig: use 'else ifneq' for Makefile to improve readability
        kbuild: check uniqueness of module names
        kconfig: Terminate menu blocks with a comment in the generated config
        kbuild: add LICENSES to KBUILD_ALLDIRS
        kbuild: remove 'addtree' and 'flags' magic for header search paths
        treewide: prefix header search paths with $(srctree)/
        media: prefix header search paths with $(srctree)/
        media: remove unneeded header search paths
        alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig
        kbuild: terminate Kconfig when $(CC) or $(LD) is missing
        kbuild: turn auto.conf.cmd into a mandatory include file
        .gitignore: exclude .get_maintainer.ignore and .gitattributes
        kbuild: add all Clang-specific flags unconditionally
        kbuild: Don't try to add '-fcatch-undefined-behavior' flag
        kbuild: add some extra warning flags unconditionally
        kbuild: add -Wvla flag unconditionally
        arch: remove dangling asm-generic wrappers
        samples: guard sub-directories with CONFIG options
        kbuild: re-enable int-in-bool-context warning
        MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux*
        ...
      ff8583d6
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · f23d8719
      Linus Torvalds authored
      Pull i2c updates from Wolfram Sang:
       "Some I2C core API additions which are kind of simple but enhance error
        checking for users a lot, especially by returning errno now.
      
        There are wrappers to still support the old API but it will be removed
        once all users are converted"
      
      * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: core: add device-managed version of i2c_new_dummy
        i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
      f23d8719
    • Linus Torvalds's avatar
      Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 · c4d36b63
      Linus Torvalds authored
      Pull ext4 fixes from Ted Ts'o:
       "Some bug fixes, and an update to the URL's for the final version of
        Unicode 12.1.0"
      
      * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
        ext4: avoid panic during forced reboot due to aborted journal
        ext4: fix block validity checks for journal inodes using indirect blocks
        unicode: update to Unicode 12.1.0 final
        unicode: add missing check for an error return from utf8lookup()
        ext4: fix miscellaneous sparse warnings
        ext4: unsigned int compared against zero
        ext4: fix use-after-free in dx_release()
        ext4: fix data corruption caused by overlapping unaligned and aligned IO
        jbd2: fix potential double free
        ext4: zero out the unused memory region in the extent tree block
      c4d36b63
    • Linus Torvalds's avatar
      Merge tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 · d8848eef
      Linus Torvalds authored
      Pull cifs fixes from Steve French:
       "Minor cleanup and fixes, one for stable, four rdma (smbdirect)
        related. Also adds SEEK_HOLE support"
      
      * tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
        cifs: add support for SEEK_DATA and SEEK_HOLE
        Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file
        cifs: Allocate memory for all iovs in smb2_ioctl
        cifs: Don't match port on SMBDirect transport
        cifs:smbd Use the correct DMA direction when sending data
        cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called
        cifs: use the right include for signal_pending()
        smb3: trivial cleanup to smb2ops.c
        cifs: cleanup smb2ops.c and normalize strings
        smb3: display session id in debug data
      d8848eef
    • Linus Torvalds's avatar
      Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 1ba3b5dc
      Linus Torvalds authored
      Pull perf tooling updates from Ingo Molnar:
       "perf.data:
      
         - Streaming compression of perf ring buffer into
           PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x
           perf.data file size reduction on variety of tested workloads what
           saves storage space on larger server systems where perf.data size
           can easily reach several tens or even hundreds of GiBs, especially
           when profiling with DWARF-based stacks and tracing of context
           switches.
      
        perf record:
      
         - Improve -user-regs/intr-regs suggestions to overcome errors
      
        perf annotate:
      
         - Remove hist__account_cycles() from callback, speeding up branch
           processing (perf record -b)
      
        perf stat:
      
         - Add a 'percore' event qualifier, e.g.: -e
           cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for
           both hardware threads in a core.
      
           We can already do this with --per-core, but it's often useful to do
           this together with other metrics that are collected per hardware
           thread.
      
           I.e. now its possible to do this per-event, and have it mixed with
           other events not aggregated by core.
      
        arm64:
      
         - Map Brahma-B53 CPUID to cortex-a53 events.
      
         - Add Cortex-A57 and Cortex-A72 events.
      
        csky:
      
         - Add DWARF register mappings for libdw, allowing --call-graph=dwarf
           to work on the C-SKY arch.
      
        x86:
      
         - Add support for recording and printing XMM registers, available,
           for instance, on Icelake.
      
         - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON
           support. UPI replaced the Intel QuickPath Interconnect (QPI) in
           Xeon Skylake-SP.
      
        Intel PT:
      
         - Fix instructions sampling rate.
      
         - Timestamp fixes.
      
         - Improve exported-sql-viewer GUI, allowing, for instance, to
           copy'n'paste the trees, useful for e-mailing"
      
      * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
        perf stat: Support 'percore' event qualifier
        perf stat: Factor out aggregate counts printing
        perf tools: Add a 'percore' event qualifier
        perf docs: Add description for stderr
        perf intel-pt: Fix sample timestamp wrt non-taken branches
        perf intel-pt: Fix improved sample timestamp
        perf intel-pt: Fix instructions sampling rate
        perf regs x86: Add X86 specific arch__intr_reg_mask()
        perf parse-regs: Add generic support for arch__intr/user_reg_mask()
        perf parse-regs: Split parse_regs
        perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events
        perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events
        perf vendor events arm64: Remove [[:xdigit:]] wildcard
        perf jevents: Remove unused variable
        perf test zstd: Fixup verbose mode output
        perf tests: Implement Zstd comp/decomp integration test
        perf inject: Enable COMPRESSED record decompression
        perf report: Implement perf.data record decompression
        perf record: Implement -z,--compression_level[=<n>] option
        perf report: Add stub processing of compressed events for -D
        ...
      1ba3b5dc
    • Linus Torvalds's avatar
      Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · a13f950e
      Linus Torvalds authored
      Pull clocksource updates from Ingo Molnar:
       "Misc clocksource/clockevent driver updates that came in a bit late but
        are ready for v5.2"
      
      * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        misc: atmel_tclib: Do not probe already used TCBs
        clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static
        clocksource/drivers/tcb_clksrc: Rename the file for consistency
        clocksource/drivers/timer-atmel-pit: Rework Kconfig option
        clocksource/drivers/tcb_clksrc: Move Kconfig option
        ARM: at91: Implement clocksource selection
        clocksource/drivers/tcb_clksrc: Use tcb as sched_clock
        clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib
        ARM: at91: move SoC specific definitions to SoC folder
        clocksource/drivers/timer-milbeaut: Cleanup common register accesses
        clocksource/drivers/timer-milbeaut: Add shutdown function
        clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer
        clocksource/drivers/tegra: Rework for compensation of suspend time
        clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
        clocksource/drivers/sun4i: Add a compatible for suniv
        dt-bindings: timer: Add Allwinner suniv timer
      a13f950e
    • Linus Torvalds's avatar
      Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · d9351ea1
      Linus Torvalds authored
      Pull IRQ chip updates from Ingo Molnar:
       "A late irqchips update:
      
         - New TI INTR/INTA set of drivers
      
         - Rewrite of the stm32mp1-exti driver as a platform driver
      
         - Update the IOMMU MSI mapping API to be RT friendly
      
         - A number of cleanups and other low impact fixes"
      
      * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
        iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
        irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
        irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
        irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
        irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
        iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
        genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
        arm64: arch_k3: Enable interrupt controller drivers
        irqchip/ti-sci-inta: Add msi domain support
        soc: ti: Add MSI domain bus support for Interrupt Aggregator
        irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
        dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
        irqchip/ti-sci-intr: Add support for Interrupt Router driver
        dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
        gpio: thunderx: Use the default parent apis for {request,release}_resources
        genirq: Introduce irq_chip_{request,release}_resource_parent() apis
        firmware: ti_sci: Add helper apis to manage resources
        firmware: ti_sci: Add RM mapping table for am654
        firmware: ti_sci: Add support for IRQ management
        firmware: ti_sci: Add support for RM core ops
        ...
      d9351ea1
    • Linus Torvalds's avatar
      Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 39feaa3f
      Linus Torvalds authored
      Pull EFI fix from Ingo Molnar:
       "Fix an EFI-fb regression that affects certain x86 systems"
      
      * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types
      39feaa3f
    • Linus Torvalds's avatar
      Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 1335d9a1
      Linus Torvalds authored
      Pull core fixes from Ingo Molnar:
       "This fixes a particularly thorny munmap() bug with MPX, plus fixes a
        host build environment assumption in objtool"
      
      * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        objtool: Allow AR to be overridden with HOSTAR
        x86/mpx, mm/core: Fix recursive munmap() corruption
      1335d9a1
    • Linus Torvalds's avatar
      Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc · 4c4a5c99
      Linus Torvalds authored
      Pull ARM SoC late updates from Olof Johansson:
       "This is some material that we picked up into our tree late. Most of it
        are smaller fixes and additions, some defconfig updates due to recent
        development, etc.
      
        Code-wise the largest portion is a series of PM updates for the at91
        platform, and those have been in linux-next a while through the at91
        tree before we picked them up"
      
      * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
        arm64: dts: sprd: Add clock properties for serial devices
        Opt out of scripts/get_maintainer.pl
        ARM: ixp4xx: Remove duplicated include from common.c
        soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
        arm64: tegra: Disable XUSB support on Jetson TX2
        arm64: tegra: Enable SMMU translation for PCI on Tegra186
        arm64: tegra: Fix insecure SMMU users for Tegra186
        arm64: tegra: Select ARM_GIC_PM
        amba: tegra-ahb: Mark PM functions as __maybe_unused
        ARM: dts: logicpd-som-lv: Fix MMC1 card detect
        ARM: mvebu: drop return from void function
        ARM: mvebu: prefix coprocessor operand with p
        ARM: mvebu: drop unnecessary label
        ARM: mvebu: fix a leaked reference by adding missing of_node_put
        ARM: socfpga_defconfig: enable LTC2497
        ARM: mvebu: kirkwood: remove error message when retrieving mac address
        ARM: at91: sama5: make ov2640 as a module
        ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
        ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
        soc/fsl/qe: Fix an error code in qe_pin_request()
        ...
      4c4a5c99
    • Linus Torvalds's avatar
      Merge tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · 86a78a8b
      Linus Torvalds authored
      Pull powerpc fixes from Michael Ellerman:
       "One fix going back to stable, for a bug on 32-bit introduced when we
        added support for THREAD_INFO_IN_TASK.
      
        A fix for a typo in a recent rework of our hugetlb code that leads to
        crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE.
      
        Two fixes for our recent rework of the address layout on 64-bit hash
        CPUs, both only triggered when userspace tries to access addresses
        outside the user or kernel address ranges.
      
        Finally a fix for a recently introduced double free in an error path
        in our cacheinfo code.
      
        Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C.
        Harding"
      
      * tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
        powerpc/cacheinfo: Remove double free
        powerpc/mm/hash: Fix get_region_id() for invalid addresses
        powerpc/mm: Drop VM_BUG_ON in get_region_id()
        powerpc/mm: Fix crashes with hugepages & 4K pages
        powerpc/32s: fix flush_hash_pages() on SMP
      86a78a8b
    • Linus Torvalds's avatar
      Merge tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux · bcd17397
      Linus Torvalds authored
      Pull a few more MIPS updates from Paul Burton:
       "Some SGI IP27 specific PCI rework and a batch of fixes:
      
         - A build fix for BMIPS5000 configurations with
           CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery.
      
         - A fix to report supported ISAs correctly on older Ingenic SoCs
           which incorrectly indicate MIPSr2 support in their cop0 Config
           register.
      
         - Some PCI modernization for SGI IP27 systems as part of ongoing work
           to support some other SGI systems.
      
         - A fix allowing use of appended DTB files with generic kernels.
      
         - DMA mask fixes for SGI IP22 & Alchemy systems"
      
      * tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
        MIPS: Alchemy: add DMA masks for on-chip ethernet
        MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask
        generic: fix appended dtb support
        MIPS: SGI-IP27: abstract chipset irq from bridge
        MIPS: SGI-IP27: use generic PCI driver
        MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA
        MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled
      bcd17397
    • Linus Torvalds's avatar
      Merge tag 'riscv-for-linus-5.2-mw2' of... · b0bb1269
      Linus Torvalds authored
      Merge tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
      
      Pull RISC-V updates from Palmer Dabbelt:
       "This contains an assortment of RISC-V related patches that I'd like to
        target for the 5.2 merge window. Most of the patches are cleanups, but
        there are a handful of user-visible changes:
      
         - The nosmp and nr_cpus command-line arguments are now supported,
           which work like normal.
      
         - The SBI console no longer installs itself as a preferred console,
           we rely on standard mechanisms (/chosen, command-line, hueristics)
           instead.
      
         - sfence_remove_sfence_vma{,_asid} now pass their arguments along to
           the SBI call.
      
         - Modules now support BUG().
      
         - A missing sfence.vma during boot has been added. This bug only
           manifests during boot.
      
         - The arch/riscv support for SiFive's L2 cache controller has been
           merged, which should un-block the EDAC framework work.
      
        I've only tested this on QEMU again, as I didn't have time to get
        things running on the Unleashed. The latest master from this morning
        merges in cleanly and passes the tests as well"
      
      * tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
        riscv: fix locking violation in page fault handler
        RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
        RISC-V: Add DT documentation for SiFive L2 Cache Controller
        RISC-V: Avoid using invalid intermediate translations
        riscv: Support BUG() in kernel module
        riscv: Add the support for c.ebreak check in is_valid_bugaddr()
        riscv: support trap-based WARN()
        riscv: fix sbi_remote_sfence_vma{,_asid}.
        riscv: move switch_mm to its own file
        riscv: move flush_icache_{all,mm} to cacheflush.c
        tty: Don't force RISCV SBI console as preferred console
        RISC-V: Access CSRs using CSR numbers
        RISC-V: Add interrupt related SCAUSE defines in asm/csr.h
        RISC-V: Use tabs to align macro values in asm/csr.h
        RISC-V: Fix minor checkpatch issues.
        RISC-V: Support nr_cpus command line option.
        RISC-V: Implement nosmp commandline option.
        RISC-V: Add RISC-V specific arch_match_cpu_phys_id
        riscv: vdso: drop unnecessary cc-ldoption
        riscv: call pm_power_off from machine_halt / machine_power_off
        ...
      b0bb1269
    • Masahiro Yamada's avatar
      kconfig: use 'else ifneq' for Makefile to improve readability · fc2694ec
      Masahiro Yamada authored
      'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81
      or later, which is the requirement for building the kernel since
      commit 37d69ee3 ("docs: bump minimal GNU Make version to 3.81").
      
      Use it to improve the readability.
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      fc2694ec
  3. 18 May, 2019 10 commits
    • Feng Tang's avatar
      panic: add an option to replay all the printk message in buffer · de6da1e8
      Feng Tang authored
      Currently on panic, kernel will lower the loglevel and print out pending
      printk msg only with console_flush_on_panic().
      
      Add an option for users to configure the "panic_print" to replay all
      dmesg in buffer, some of which they may have never seen due to the
      loglevel setting, which will help panic debugging .
      
      [feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()]
        Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com
      [feng.tang@intel.com: use logbuf lock to protect the console log index]
        Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com
      Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.comSigned-off-by: default avatarFeng Tang <feng.tang@intel.com>
      Reviewed-by: default avatarPetr Mladek <pmladek@suse.com>
      Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
      Cc: Petr Mladek <pmladek@suse.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Borislav Petkov <bp@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      de6da1e8
    • Steven Price's avatar
      initramfs: don't free a non-existent initrd · 5d59aa8f
      Steven Price authored
      Since commit 54c7a891 ("initramfs: free initrd memory if opening
      /initrd.image fails"), the kernel has unconditionally attempted to free
      the initrd even if it doesn't exist.
      
      In the non-existent case this causes a boot-time splat if
      CONFIG_DEBUG_VIRTUAL is enabled due to a call to virt_to_phys() with a
      NULL address.
      
      Instead we should check that the initrd actually exists and only attempt
      to free it if it does.
      
      Link: http://lkml.kernel.org/r/20190516143125.48948-1-steven.price@arm.com
      Fixes: 54c7a891 ("initramfs: free initrd memory if opening /initrd.image fails")
      Signed-off-by: default avatarSteven Price <steven.price@arm.com>
      Reported-by: default avatarMark Rutland <mark.rutland@arm.com>
      Tested-by: default avatarMark Rutland <mark.rutland@arm.com>
      Reviewed-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5d59aa8f
    • Jiufei Xue's avatar
      fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount · ec084de9
      Jiufei Xue authored
      synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb
      switch may not go to the workqueue after synchronize_rcu().  Thus
      previous scheduled switches was not finished even flushing the
      workqueue, which will cause a NULL pointer dereferenced followed below.
      
        VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds.  Have a nice day...
        BUG: unable to handle kernel NULL pointer dereference at 0000000000000278
          evict+0xb3/0x180
          iput+0x1b0/0x230
          inode_switch_wbs_work_fn+0x3c0/0x6a0
          worker_thread+0x4e/0x490
          ? process_one_work+0x410/0x410
          kthread+0xe6/0x100
          ret_from_fork+0x39/0x50
      
      Replace the synchronize_rcu() call with a rcu_barrier() to wait for all
      pending callbacks to finish.  And inc isw_nr_in_flight after call_rcu()
      in inode_switch_wbs() to make more sense.
      
      Link: http://lkml.kernel.org/r/20190429024108.54150-1-jiufei.xue@linux.alibaba.comSigned-off-by: default avatarJiufei Xue <jiufei.xue@linux.alibaba.com>
      Acked-by: default avatarTejun Heo <tj@kernel.org>
      Suggested-by: default avatarTejun Heo <tj@kernel.org>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ec084de9
    • Mel Gorman's avatar
      mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock · 60fce36a
      Mel Gorman authored
      syzbot reported the following error from a tree with a head commit of
      baf76f0c ("slip: make slhc_free() silently accept an error pointer")
      
        BUG: unable to handle kernel paging request at ffffea0003348000
        #PF error: [normal kernel read fault]
        PGD 12c3f9067 P4D 12c3f9067 PUD 12c3f8067 PMD 0
        Oops: 0000 [#1] PREEMPT SMP KASAN
        CPU: 1 PID: 28916 Comm: syz-executor.2 Not tainted 5.1.0-rc6+ #89
        Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
        RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:314 [inline]
        RIP: 0010:PageCompound include/linux/page-flags.h:186 [inline]
        RIP: 0010:isolate_freepages_block+0x1c0/0xd40 mm/compaction.c:579
        Code: 01 d8 ff 4d 85 ed 0f 84 ef 07 00 00 e8 29 00 d8 ff 4c 89 e0 83 85 38 ff
        ff ff 01 48 c1 e8 03 42 80 3c 38 00 0f 85 31 0a 00 00 <4d> 8b 2c 24 31 ff 49
        c1 ed 10 41 83 e5 01 44 89 ee e8 3a 01 d8 ff
        RSP: 0018:ffff88802b31eab8 EFLAGS: 00010246
        RAX: 1ffffd4000669000 RBX: 00000000000cd200 RCX: ffffc9000a235000
        RDX: 000000000001ca5e RSI: ffffffff81988cc7 RDI: 0000000000000001
        RBP: ffff88802b31ebd8 R08: ffff88805af700c0 R09: 0000000000000000
        R10: 0000000000000000 R11: 0000000000000000 R12: ffffea0003348000
        R13: 0000000000000000 R14: ffff88802b31f030 R15: dffffc0000000000
        FS:  00007f61648dc700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
        CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
        CR2: ffffea0003348000 CR3: 0000000037c64000 CR4: 00000000001426e0
        Call Trace:
         fast_isolate_around mm/compaction.c:1243 [inline]
         fast_isolate_freepages mm/compaction.c:1418 [inline]
         isolate_freepages mm/compaction.c:1438 [inline]
         compaction_alloc+0x1aee/0x22e0 mm/compaction.c:1550
      
      There is no reproducer and it is difficult to hit -- 1 crash every few
      days.  The issue is very similar to the fix in commit 6b0868c8
      ("mm/compaction.c: correct zone boundary handling when resetting pageblock
      skip hints").  When isolating free pages around a target pageblock, the
      boundary handling is off by one and can stray into the next pageblock.
      Triggering the syzbot error requires that the end of pageblock is section
      or zone aligned, and that the next section is unpopulated.
      
      A more subtle consequence of the bug is that pageblocks were being
      improperly used as migration targets which potentially hurts fragmentation
      avoidance in the long-term one page at a time.
      
      A debugging patch revealed that it's definitely possible to stray outside
      of a pageblock which is not intended.  While syzbot cannot be used to
      verify this patch, it was confirmed that the debugging warning no longer
      triggers with this patch applied.  It has also been confirmed that the THP
      allocation stress tests are not degraded by this patch.
      
      Link: http://lkml.kernel.org/r/20190510182124.GI18914@techsingularity.net
      Fixes: e332f741 ("mm, compaction: be selective about what pageblocks to clear skip hints")
      Signed-off-by: default avatarMel Gorman <mgorman@techsingularity.net>
      Reported-by: syzbot+d84c80f9fe26a0f7a734@syzkaller.appspotmail.com
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Qian Cai <cai@lca.pw>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: <stable@vger.kernel.org> # v5.1+
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      60fce36a
    • Uladzislau Rezki (Sony)'s avatar
      mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro · a6cf4e0f
      Uladzislau Rezki (Sony) authored
      This macro adds some debug code to check that vmap allocations are
      happened in ascending order.
      
      By default this option is set to 0 and not active.  It requires
      recompilation of the kernel to activate it.  Set to 1, compile the
      kernel.
      
      [urezki@gmail.com: v4]
        Link: http://lkml.kernel.org/r/20190406183508.25273-4-urezki@gmail.com
      Link: http://lkml.kernel.org/r/20190402162531.10888-4-urezki@gmail.comSigned-off-by: default avatarUladzislau Rezki (Sony) <urezki@gmail.com>
      Reviewed-by: default avatarRoman Gushchin <guro@fb.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Joel Fernandes <joelaf@google.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Garnier <thgarnie@google.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a6cf4e0f
    • Uladzislau Rezki (Sony)'s avatar
      mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro · bb850f4d
      Uladzislau Rezki (Sony) authored
      This macro adds some debug code to check that the augment tree is
      maintained correctly, meaning that every node contains valid
      subtree_max_size value.
      
      By default this option is set to 0 and not active.  It requires
      recompilation of the kernel to activate it.  Set to 1, compile the
      kernel.
      
      [urezki@gmail.com: v4]
        Link: http://lkml.kernel.org/r/20190406183508.25273-3-urezki@gmail.com
      Link: http://lkml.kernel.org/r/20190402162531.10888-3-urezki@gmail.comSigned-off-by: default avatarUladzislau Rezki (Sony) <urezki@gmail.com>
      Reviewed-by: default avatarRoman Gushchin <guro@fb.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Joel Fernandes <joelaf@google.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Garnier <thgarnie@google.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bb850f4d
    • Uladzislau Rezki (Sony)'s avatar
      mm/vmalloc.c: keep track of free blocks for vmap allocation · 68ad4a33
      Uladzislau Rezki (Sony) authored
      Patch series "improve vmap allocation", v3.
      
      Objective
      ---------
      
      Please have a look for the description at:
      
        https://lkml.org/lkml/2018/10/19/786
      
      but let me also summarize it a bit here as well.
      
      The current implementation has O(N) complexity. Requests with different
      permissive parameters can lead to long allocation time. When i say
      "long" i mean milliseconds.
      
      Description
      -----------
      
      This approach organizes the KVA memory layout into free areas of the
      1-ULONG_MAX range, i.e.  an allocation is done over free areas lookups,
      instead of finding a hole between two busy blocks.  It allows to have
      lower number of objects which represent the free space, therefore to have
      less fragmented memory allocator.  Because free blocks are always as large
      as possible.
      
      It uses the augment tree where all free areas are sorted in ascending
      order of va->va_start address in pair with linked list that provides
      O(1) access to prev/next elements.
      
      Since the tree is augment, we also maintain the "subtree_max_size" of VA
      that reflects a maximum available free block in its left or right
      sub-tree.  Knowing that, we can easily traversal toward the lowest (left
      most path) free area.
      
      Allocation: ~O(log(N)) complexity.  It is sequential allocation method
      therefore tends to maximize locality.  The search is done until a first
      suitable block is large enough to encompass the requested parameters.
      Bigger areas are split.
      
      I copy paste here the description of how the area is split, since i
      described it in https://lkml.org/lkml/2018/10/19/786
      
      <snip>
      
      A free block can be split by three different ways.  Their names are
      FL_FIT_TYPE, LE_FIT_TYPE/RE_FIT_TYPE and NE_FIT_TYPE, i.e.  they
      correspond to how requested size and alignment fit to a free block.
      
      FL_FIT_TYPE - in this case a free block is just removed from the free
      list/tree because it fully fits.  Comparing with current design there is
      an extra work with rb-tree updating.
      
      LE_FIT_TYPE/RE_FIT_TYPE - left/right edges fit.  In this case what we do
      is just cutting a free block.  It is as fast as a current design.  Most of
      the vmalloc allocations just end up with this case, because the edge is
      always aligned to 1.
      
      NE_FIT_TYPE - Is much less common case.  Basically it happens when
      requested size and alignment does not fit left nor right edges, i.e.  it
      is between them.  In this case during splitting we have to build a
      remaining left free area and place it back to the free list/tree.
      
      Comparing with current design there are two extra steps.  First one is we
      have to allocate a new vmap_area structure.  Second one we have to insert
      that remaining free block to the address sorted list/tree.
      
      In order to optimize a first case there is a cache with free_vmap objects.
      Instead of allocating from slab we just take an object from the cache and
      reuse it.
      
      Second one is pretty optimized.  Since we know a start point in the tree
      we do not do a search from the top.  Instead a traversal begins from a
      rb-tree node we split.
      <snip>
      
      De-allocation.  ~O(log(N)) complexity.  An area is not inserted straight
      away to the tree/list, instead we identify the spot first, checking if it
      can be merged around neighbors.  The list provides O(1) access to
      prev/next, so it is pretty fast to check it.  Summarizing.  If merged then
      large coalesced areas are created, if not the area is just linked making
      more fragments.
      
      There is one more thing that i should mention here.  After modification of
      VA node, its subtree_max_size is updated if it was/is the biggest area in
      its left or right sub-tree.  Apart of that it can also be populated back
      to upper levels to fix the tree.  For more details please have a look at
      the __augment_tree_propagate_from() function and the description.
      
      Tests and stressing
      -------------------
      
      I use the "test_vmalloc.sh" test driver available under
      "tools/testing/selftests/vm/" since 5.1-rc1 kernel.  Just trigger "sudo
      ./test_vmalloc.sh" to find out how to deal with it.
      
      Tested on different platforms including x86_64/i686/ARM64/x86_64_NUMA.
      Regarding last one, i do not have any physical access to NUMA system,
      therefore i emulated it.  The time of stressing is days.
      
      If you run the test driver in "stress mode", you also need the patch that
      is in Andrew's tree but not in Linux 5.1-rc1.  So, please apply it:
      
      http://git.cmpxchg.org/cgit.cgi/linux-mmotm.git/commit/?id=e0cf7749bade6da318e98e934a24d8b62fab512c
      
      After massive testing, i have not identified any problems like memory
      leaks, crashes or kernel panics.  I find it stable, but more testing would
      be good.
      
      Performance analysis
      --------------------
      
      I have used two systems to test.  One is i5-3320M CPU @ 2.60GHz and
      another is HiKey960(arm64) board.  i5-3320M runs on 4.20 kernel, whereas
      Hikey960 uses 4.15 kernel.  I have both system which could run on 5.1-rc1
      as well, but the results have not been ready by time i an writing this.
      
      Currently it consist of 8 tests.  There are three of them which correspond
      to different types of splitting(to compare with default).  We have 3
      ones(see above).  Another 5 do allocations in different conditions.
      
      a) sudo ./test_vmalloc.sh performance
      
      When the test driver is run in "performance" mode, it runs all available
      tests pinned to first online CPU with sequential execution test order.  We
      do it in order to get stable and repeatable results.  Take a look at time
      difference in "long_busy_list_alloc_test".  It is not surprising because
      the worst case is O(N).
      
      # i5-3320M
      How many cycles all tests took:
      CPU0=646919905370(default) cycles vs CPU0=193290498550(patched) cycles
      
      # See detailed table with results here:
      ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_default.txt
      ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_patched.txt
      
      # Hikey960 8x CPUs
      How many cycles all tests took:
      CPU0=3478683207 cycles vs CPU0=463767978 cycles
      
      # See detailed table with results here:
      ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_default.txt
      ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_patched.txt
      
      b) time sudo ./test_vmalloc.sh test_repeat_count=1
      
      With this configuration, all tests are run on all available online CPUs.
      Before running each CPU shuffles its tests execution order.  It gives
      random allocation behaviour.  So it is rough comparison, but it puts in
      the picture for sure.
      
      # i5-3320M
      <default>            vs            <patched>
      real    101m22.813s                real    0m56.805s
      user    0m0.011s                   user    0m0.015s
      sys     0m5.076s                   sys     0m0.023s
      
      # See detailed table with results here:
      ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_count_1_default.txt
      ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_count_1_patched.txt
      
      # Hikey960 8x CPUs
      <default>            vs            <patched>
      real    unknown                    real    4m25.214s
      user    unknown                    user    0m0.011s
      sys     unknown                    sys     0m0.670s
      
      I did not manage to complete this test on "default Hikey960" kernel
      version.  After 24 hours it was still running, therefore i had to cancel
      it.  That is why real/user/sys are "unknown".
      
      This patch (of 3):
      
      Currently an allocation of the new vmap area is done over busy list
      iteration(complexity O(n)) until a suitable hole is found between two busy
      areas.  Therefore each new allocation causes the list being grown.  Due to
      over fragmented list and different permissive parameters an allocation can
      take a long time.  For example on embedded devices it is milliseconds.
      
      This patch organizes the KVA memory layout into free areas of the
      1-ULONG_MAX range.  It uses an augment red-black tree that keeps blocks
      sorted by their offsets in pair with linked list keeping the free space in
      order of increasing addresses.
      
      Nodes are augmented with the size of the maximum available free block in
      its left or right sub-tree.  Thus, that allows to take a decision and
      traversal toward the block that will fit and will have the lowest start
      address, i.e.  it is sequential allocation.
      
      Allocation: to allocate a new block a search is done over the tree until a
      suitable lowest(left most) block is large enough to encompass: the
      requested size, alignment and vstart point.  If the block is bigger than
      requested size - it is split.
      
      De-allocation: when a busy vmap area is freed it can either be merged or
      inserted to the tree.  Red-black tree allows efficiently find a spot
      whereas a linked list provides a constant-time access to previous and next
      blocks to check if merging can be done.  In case of merging of
      de-allocated memory chunk a large coalesced area is created.
      
      Complexity: ~O(log(N))
      
      [urezki@gmail.com: v3]
        Link: http://lkml.kernel.org/r/20190402162531.10888-2-urezki@gmail.com
      [urezki@gmail.com: v4]
        Link: http://lkml.kernel.org/r/20190406183508.25273-2-urezki@gmail.com
      Link: http://lkml.kernel.org/r/20190321190327.11813-2-urezki@gmail.comSigned-off-by: default avatarUladzislau Rezki (Sony) <urezki@gmail.com>
      Reviewed-by: default avatarRoman Gushchin <guro@fb.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Thomas Garnier <thgarnie@google.com>
      Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Joel Fernandes <joelaf@google.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Tejun Heo <tj@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      68ad4a33
    • Ingo Molnar's avatar
      Merge tag 'perf-core-for-mingo-5.2-20190517' of... · 62e1c094
      Ingo Molnar authored
      Merge tag 'perf-core-for-mingo-5.2-20190517' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
      
      Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
      
      perf.data:
      
        Alexey Budankov:
      
        - Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED
          user space records, resulting in ~3-5x perf.data file size reduction
          on variety of tested workloads what saves storage space on larger
          server systems where perf.data size can easily reach several tens or
          even hundreds of GiBs, especially when profiling with DWARF-based
          stacks and tracing of context switches.
      
      perf record:
      
        Arnaldo Carvalho de Melo
      
        - Improve -user-regs/intr-regs suggestions to overcome errors.
      
      perf annotate:
      
        Jin Yao:
      
        - Remove hist__account_cycles() from callback, speeding up branch processing
          (perf record -b).
      
      perf stat:
      
        - Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/,
          that sums up the event counts for both hardware threads in a core.
      
          We can already do this with --per-core, but it's often useful to do
          this together with other metrics that are collected per hardware thread.
      
          I.e. now its possible to do this per-event, and have it mixed with other
          events not aggregated by core.
      
      core libraries:
      
        Donald Yandt:
      
        - Check for errors when doing fgets(/proc/version).
      
        Jiri Olsa:
      
        - Speed up report for perf compiled with linbunwind.
      
      tools headers:
      
        Arnaldo Carvalho de Melo
      
        - Update memcpy_64.S, x86's kvm.h and pt_regs.h.
      
      arm64:
      
        Florian Fainelli:
      
        - Map Brahma-B53 CPUID to cortex-a53 events.
      
        - Add Cortex-A57 and Cortex-A72 events.
      
      csky:
      
        Mao Han:
      
        - Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work
          on the C-SKY arch.
      
      x86:
      
        Andi Kleen/Kan Liang:
      
        - Add support for recording and printing XMM registers, available, for
          instance, on Icelake.
      
        Kan Liang:
      
        - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support.
          UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP.
      
      Intel PT:
      
        Adrian Hunter
      
        . Fix instructions sampling rate.
      
        . Timestamp fixes.
      
        . Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste
          the trees, useful for e-mailing.
      
      Documentation:
      
        Thomas Richter:
      
        - Add description for 'perf --debug stderr=1', which redirects stderr to stdout.
      
      libtraceevent:
      
        Tzvetomir Stoyanov:
      
        - Add man pages for the various APIs.
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      62e1c094
    • Masahiro Yamada's avatar
      kbuild: check uniqueness of module names · 3a48a919
      Masahiro Yamada authored
      In the recent build test of linux-next, Stephen saw a build error
      caused by a broken .tmp_versions/*.mod file:
      
        https://lkml.org/lkml/2019/5/13/991
      
      drivers/net/phy/asix.ko and drivers/net/usb/asix.ko have the same
      basename, and there is a race in generating .tmp_versions/asix.mod
      
      Kbuild has not checked this before, and it suddenly shows up with
      obscure error messages when this kind of race occurs.
      
      Non-unique module names cause various sort of problems, but it is
      not trivial to catch them by eyes.
      
      Hence, this script.
      
      It checks not only real modules, but also built-in modules (i.e.
      controlled by tristate CONFIG option, but currently compiled with =y).
      Non-unique names for built-in modules also cause problems because
      /sys/modules/ would fall over.
      
      For the latest kernel, I tested "make allmodconfig all" (or more
      quickly "make allyesconfig modules"), and it detected the following:
      
      warning: same basename if the following are built as modules:
        drivers/regulator/88pm800.ko
        drivers/mfd/88pm800.ko
      warning: same basename if the following are built as modules:
        drivers/gpu/drm/bridge/adv7511/adv7511.ko
        drivers/media/i2c/adv7511.ko
      warning: same basename if the following are built as modules:
        drivers/net/phy/asix.ko
        drivers/net/usb/asix.ko
      warning: same basename if the following are built as modules:
        fs/coda/coda.ko
        drivers/media/platform/coda/coda.ko
      warning: same basename if the following are built as modules:
        drivers/net/phy/realtek.ko
        drivers/net/dsa/realtek.ko
      Reported-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Reviewed-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
      Reviewed-by: default avatarLucas De Marchi <lucas.demarchi@intel.com>
      3a48a919
    • Alexander Popov's avatar
      kconfig: Terminate menu blocks with a comment in the generated config · aff11cd9
      Alexander Popov authored
      Currently menu blocks start with a pretty header but end with nothing in
      the generated config. So next config options stick together with the
      options from the menu block.
      
      Let's terminate menu blocks in the generated config with a comment and
      a newline if needed. Example:
      
      ...
      CONFIG_BPF_STREAM_PARSER=y
      CONFIG_NET_FLOW_LIMIT=y
      
      #
      # Network testing
      #
      CONFIG_NET_PKTGEN=y
      CONFIG_NET_DROP_MONITOR=y
      # end of Network testing
      # end of Networking options
      
      CONFIG_HAMRADIO=y
      ...
      Signed-off-by: default avatarAlexander Popov <alex.popov@linux.com>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      aff11cd9