- 29 Jul, 2014 12 commits
-
-
WANG Cong authored
Similarly, vlan will create /proc/net/vlan/<dev>, so when we create dev with name "config", it will confict with /proc/net/vlan/config. Reported-by:
Stephane Chazelas <stephane.chazelas@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
We create a proc dir for each network device, this will cause conflicts when the devices have name "all" or "default". Rather than emitting an ugly kernel warning, we could just fail earlier by checking the device name. Reported-by:
-
WANG Cong authored
We create a proc dir for each network device, this will cause conflicts when the devices have name "all" or "default". Rather than emitting an ugly kernel warning, we could just fail earlier by checking the device name. Reported-by:
-
David S. Miller authored
Willem de Bruijn says: ==================== net: remove deprecated syststamp The network stack can generate two kinds of hardware timestamps: - hwtstamp stores a hw timestamp in device-specific raw format - syststamp convers the raw format to system time The second is deprecated and only implemented by a single device driver. The suggested alternative is to communicate hwtstamp + directly expose the NIC PTP clock device through ptp_clock_info. The remaining driver (octeon) does not expose such a standard interface as of now. It does have its own PTP library that depends on its own shared memory PTP clock interface. This patchset 1. reverts the syststamp code in the one driver (octeon) 2. reverts an unnecessary zero initialization in another (vxge) 3. modifies PF_PACKET to use syststamp is != 0 (because always == 0) 4. modifies SCM_TIMESTAMPING in the same way For backwards compatibility, the interfaces are not removed. Applications can still request SOF_TIMESTAMPING_SYS_HARDWARE. The response field in scm_timestamping also remains. As was the case for hardware/drivers that did not implement the feature, the setsockopt succeeds, but the response field is always zero. ==================== Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Willem de Bruijn authored
The SO_TIMESTAMPING API defines three types of timestamps: software, hardware in raw format (hwtstamp) and hardware converted to system format (syststamp). The last has been deprecated in favor of combining hwtstamp with a PTP clock driver. There are no active users in the kernel. The option was device driver dependent. If set, but without hardware support, the correct behavior is to return zero in the relevant field in the SCM_TIMESTAMPING ancillary message. Without device drivers implementing the option, this field is effectively always zero. Remove the internal plumbing to dissuage new drivers from implementing the feature. Keep the SOF_TIMESTAMPING_SYS_HARDWARE flag, however, to avoid breaking existing applications that request the timestamp. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
No device driver will ever return an skb_shared_info structure with syststamp non-zero, so remove the branch that tests for this and optionally marks the packet timestamp as TP_STATUS_TS_SYS_HARDWARE. Do not remove the definition TP_STATUS_TS_SYS_HARDWARE, as processes may refer to it. Signed-off-by:
-
Willem de Bruijn authored
This driver explicitly clears a field that is unused and about to be removed. Remove the initialization. All fields in skb_shared_info before dataref are cleared in __alloc_skb, so the removal is safe even while syststamp exists. Signed-off-by:
-
Willem de Bruijn authored
Hardware timestamps can be exposed to userspace in raw hardware format (hwtstamp) as well as converted to system time (syststamp). The second variant is deprecated and only implemented by this driver. The preferred method of hardware timestamp generation is to combine hwtstamp with a device PTP clock. Octeon has its own PTP library that relies on a shared memory interface to the PTP clock device. Signed-off-by:
-
Jon Paul Maloy authored
As per comment from David Miller, we try to make the buffer reassembly function more resilient to user errors than it is today. - We check that the "*buf" parameter always is set, since this is mandatory input. - We ensure that *buf->next always is set to NULL before linking in the buffer, instead of relying of the caller to have done this. - We ensure that the "tail" pointer in the head buffer's control block is initialized to NULL when the first fragment arrives. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'master-2014-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-07-25 Please pull this batch of updates intended for the 3.17 stream! For the mac80211 bits, Johannes says: "We have a lot of TDLS patches, among them a fix that should make hwsim tests happy again. The rest, this time, is mostly small fixes." For the Bluetooth bits, Gustavo says: "Some more patches for 3.17. The most important change here is the move of the 6lowpan code to net/6lowpan. It has been agreed with Davem that this change will go through the bluetooth tree. The rest are mostly clean up and fixes." and, "Here follows some more patches for 3.17. These are mostly fixes to what we've sent to you before for next merge window." For the iwlwifi bits, Emmanuel says: "I have the usual amount of BT Coex stuff. Arik continues to work on TDLS and Ariej contributes a few things for HS2.0. I added a few more things to the firmware debugging infrastructure. Eran fixes a small bug - pretty normal content." And for the Atheros bits, Kalle says: "For ath6kl me and Jessica added support for ar6004 hw3.0, our latest version of ar6004. For ath10k Janusz added a printout so that it's easier to check what ath10k kconfig options are enabled. He also added a debugfs file to configure maximum amsdu and ampdu values. Also we had few fixes as usual." On top of that is the usual large batch of various driver updates -- brcmfmac, mwifiex, the TI drivers, and wil6210 all get some action. Rafał has also been very busy with b43 and related updates. Also, I pulled the wireless tree into this in order to resolve a merge conflict... P.S. The change to fs/compat_ioctl.c reflects a name change in a Bluetooth header file... ==================== Signed-off-by:
-
Dan Carpenter authored
This test is reversed so the memory is always leaked. It's better style to remove the test anyway. Fixes: 3e403a77 ('bonding: make it possible to have unlimited nested upper vlans') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Mark Rustad authored
Change formal parameter name to not shadow the global jiffies. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
- 28 Jul, 2014 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-07-25 This series contains updates to e1000e, ixgbe and ixgbevf. Mark provides all the changes for ixgbe and ixgbevf. Converts some udelay() calls to the preferred usleep_range(). Fixes a spurious release of the semaphore in several functions when there was a failure to acquire the semaphore in the first place. Fixes a X540 semaphore error where an incorrect check was treating success as failure and vice-versa. Fixed ixgbe_write_mbx() error when it was being called and there was no mbx->ops.write method defined, so no error code was returned. The corresponding read function would explicitly return an error in such a case as do other functions. Cleans up unused (dead) code by removing it. Finally make return values more direct, eliminating some gotos and otherwise unneeded conditionals, which allows the removal of some local variables. David provides all the changes for e1000e. Fix CRC errors with jumbo traffic for 82579, i217 and i218 client parts to increase the gap between the read and write pointers in the transmit FIFO. Added code to check and respond to previously ignored return values from NVM access functions. Added support for EEE in Sx states and fixed EEE in S5 with runtime PM enabled. ==================== Signed-off-by: -
David S. Miller authored
Nikolay Aleksandrov says: ==================== inet: frag: cleanup and update The end goal of this patchset is to remove the LRU list and to move the frag eviction to a work queue. It also does a couple of necessary cleanups and fixes. Brief patch descriptions: Patches 1 - 3 inclusive: necessary clean ups Patch 4 moves the eviction from the softirqs to a workqueue. Patch 5 removes the nqueues counter which was protected by the LRU lock Patch 6 removes the, by now unused, lru list. Patch 7 moves the rebuild timer to the workqueue and schedules the rebuilds only if we've hit the maximum queue length on some of the chains. Patch 8 migrate the rwlock to a seqlock since the rehash is usually a rare operation. Patch 9 introduces an artificial global memory limit based on the value of init_net's high_thresh which is used to cap the high_thresh of the other namespaces. Also introduces some sane limits on the other tunables, and makes it impossible to have low_thresh > high_thresh. Here are some numbers from running netperf before and after the patchset: Each test consists of the following setting: -I 95,5 -i 15,10 1. Bound test (-T 4,4) 1.1 Virtio before the patchset - MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.122.177 () port 0 AF_INET : +/-2.500% @ 95% conf. : cpu bind Socket Message Elapsed Messages CPU Service Size Size Time Okay Errors Throughput Util Demand bytes bytes secs # # 10^6bits/sec % SS us/KB 212992 64000 30.00 722177 0 12325.1 34.55 2.025 212992 30.00 368020 6280.9 34.05 0.752 1.2 Virtio after the patchset - MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.122.177 () port 0 AF_INET : +/-2.500% @ 95% conf. : cpu bind Socket Message Elapsed Messages CPU Service Size Size Time Okay Errors Throughput Util Demand bytes bytes secs # # 10^6bits/sec % SS us/KB 212992 64000 30.00 727030 0 12407.9 35.45 1.876 212992 30.00 505405 8625.5 34.92 0.693 2. Virtio unbound test 2.1 Before the patchset MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.122.177 () port 0 AF_INET : +/-2.500% @ 95% conf. Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 64000 30.00 730008 0 12458.77 212992 30.00 416721 7112.02 2.2 After the patchset MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.122.177 () port 0 AF_INET : +/-2.500% @ 95% conf. Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 64000 30.00 731129 0 12477.89 212992 30.00 487707 8323.50 3. 10 gig unbound tests 3.1 Before the patchset MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.133.1 () port 0 AF_INET : +/-2.500% @ 95% conf. Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 64000 30.00 417209 0 7120.33 212992 30.00 416740 7112.33 3.2 After the patchset MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.133.1 () port 0 AF_INET : +/-2.500% @ 95% conf. Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 64000 30.00 438009 0 7475.33 212992 30.00 437630 7468.87 Given the options each netperf ran between 10 and 15 times for 30 seconds to get the necessary confidence, also the tests themselves ran 3 times and were consistent. Another set of tests that I ran were parallel stress tests which consisted of flooding the machine with fragmented packets from different sources with frag timeout set to 0 (so there're lots of timeouts) and low_thresh set to 1 byte (so evictions are happening all the time) and on top of that running a namespace create/destroy endless loop with network interfaces and addresses that got flooded (for the brief periods they were up) in parallel. This test ran for an hour without any issues. ==================== -
Nikolay Aleksandrov authored
This patch makes init_net's high_thresh limit to be the maximum for all namespaces, thus introducing a global memory limit threshold equal to the sum of the individual high_thresh limits which are capped. It also introduces some sane minimums for low_thresh as it shouldn't be able to drop below 0 (or > high_thresh in the unsigned case), and overall low_thresh should not ever be above high_thresh, so we make the following relations for a namespace: init_net: high_thresh - max(not capped), min(init_net low_thresh) low_thresh - max(init_net high_thresh), min (0) all other namespaces: high_thresh = max(init_net high_thresh), min(namespace's low_thresh) low_thresh = max(namespace's high_thresh), min(0) The major issue with having low_thresh > high_thresh is that we'll schedule eviction but never evict anything and thus rely only on the timers. Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
Florian Westphal authored
rehash is rare operation, don't force readers to take the read-side rwlock. Instead, we only have to detect the (rare) case where the secret was altered while we are trying to insert a new inetfrag queue into the table. If it was changed, drop the bucket lock and recompute the hash to get the 'new' chain bucket that we have to insert into. Joint work with Nikolay Aleksandrov. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
merge functionality into the eviction workqueue. Instead of rebuilding every n seconds, take advantage of the upper hash chain length limit. If we hit it, mark table for rebuild and schedule workqueue. To prevent frequent rebuilds when we're completely overloaded, don't rebuild more than once every 5 seconds. ipfrag_secret_interval sysctl is now obsolete and has been marked as deprecated, it still can be changed so scripts won't be broken but it won't have any effect. A comment is left above each unused secret_timer variable to avoid confusion. Joint work with Nikolay Aleksandrov. Signed-off-by:
-
Florian Westphal authored
no longer used. Signed-off-by:
-
Florian Westphal authored
The 'nqueues' counter is protected by the lru list lock, once thats removed this needs to be converted to atomic counter. Given this isn't used for anything except for reporting it to userspace via /proc, just remove it. We still report the memory currently used by fragment reassembly queues. Signed-off-by:
-
Florian Westphal authored
When the high_thresh limit is reached we try to toss the 'oldest' incomplete fragment queues until memory limits are below the low_thresh value. This happens in softirq/packet processing context. This has two drawbacks: 1) processors might evict a queue that was about to be completed by another cpu, because they will compete wrt. resource usage and resource reclaim. 2) LRU list maintenance is expensive. But when constantly overloaded, even the 'least recently used' element is recent, so removing 'lru' queue first is not 'fairer' than removing any other fragment queue. This moves eviction out of the fast path: When the low threshold is reached, a work queue is scheduled which then iterates over the table and removes the queues that exceed the memory limits of the namespace. It sets a new flag called INET_FRAG_EVICTED on the evicted queues so the proper counters will get incremented when the queue is forcefully expired. When the high threshold is reached, no more fragment queues are created until we're below the limit again. The LRU list is now unused and will be removed in a followup patch. Joint work with Nikolay Aleksandrov. Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Florian Westphal authored
First step to move eviction handling into a work queue. We lose two spots that accounted evicted fragments in MIB counters. Accounting will be restored since the upcoming work-queue evictor invokes the frag queue timer callbacks instead. Signed-off-by:
-
Florian Westphal authored
hide actual hash size from individual users: The _find function will now fold the given hash value into the required range. Signed-off-by:
-
Florian Westphal authored
Signed-off-by:
-
- 26 Jul, 2014 12 commits
-
-
David Ertman authored
Adding a function, and associated calls, to flush writes to (read) the LPIC MAC register before entering the shutdown flow. This fixes the problem of the PHY never negotiating a 100M link (if both sides of the link support EEE and 100M link) when Runtime PM is enabled. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
David Ertman authored
The process of shutting down the system causes a call to the close PM callback. The reset in close causes a loss of link, and the resultant LSC interrupt causes the Runtime PM idle callback to be called. The check for link (while link is down) in the idle callback is wiping the information about the EEE ability of the link partner. The information is still gone when the PHY is powered back up in the shutdown flow. This causes EEE in S5 to fail when Runtime PM is active. Save the link partner's EEE ability in the idle callback so that a Runtime PM event will not cause a loss of this information. Signed-off-by:
-
David Ertman authored
On I217 and newer hardware, EEE is enabled in the PHY by the software when link is up and disabled by the hardware when link is lost. To enable EEE in Sx (When both ends of the link support, and are enabled for, EEE and 100Mbps), we need to disable LPLU and configure the PHY to automatically enable EEE when link is up, since there will be no software to complete the task. To configure this in the PHY, the Auto Enable LPI bit in the Low Power Idle GPIO Control register must be set. For normal operation in S0, this bit must be cleared. Signed-off-by:
-
David Ertman authored
Adding code to check and respond to previously ignored return values from NVM access functions. Issue discovered through static analysis. Signed-off-by:
-
David Ertman authored
Modifying the jumbo frame workaround for 82579, i217 and i218 client parts to increase the gap between the read and write pointers in the Tx FIFO. Signed-off-by:
-
Mark Rustad authored
Make return values more direct, eliminating some gotos and otherwise unneeded conditionals. This also eliminates some local variables. Also a few minor cleanups in affected code so checkpatch won't complain. Signed-off-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
-
Mark Rustad authored
Signed-off-by:
-
Mark Rustad authored
All of the code involved with returning the supported physical layer is actually unused, so delete it. Signed-off-by:
-
Mark Rustad authored
If ixgbe_write_mbx is called and no mbx->ops.write method exists, no error code is returned. The corresponding read function explicitly returns an error in such a case as do other functions, so this appears to be a minor bug. Fix it for consistency, and generate return values directly to make things clearer. Signed-off-by:
-
Mark Rustad authored
In the function ixgbe_get_swfw_sync_semaphore, an incorrect check was treating success as failure and vice-versa. This led to manipulating the IXGBE_SWFW_SYNC register without holding the software semaphore first, which is an error. In addition, if getting the REGSMP bit in the IXGBE_SW_FW_SYNC register timed out, no error code would be returned, making the caller think that it had successfully acquired the lock. Fix both of those issues and clean up the function a bit, such as make the name in the comment match the function. Signed-off-by:
-
Mark Rustad authored
Failure to acquire the semaphore would lead to a spurious release of the semaphore in several functions. Do not release a semaphore that you did not get. Signed-off-by:
-
Mark Rustad authored
Convert some udelay calls to the preferred usleep_range. Signed-off-by:
-
- 25 Jul, 2014 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: net/mac80211/cfg.c Signed-off-by:John W. Linville <linville@tuxdriver.com>
-
Li RongQing authored
After 11878b40[net-timestamp: SOCK_RAW and PING timestamping], this comment becomes obsolete since the codes check not only UDP socket, but also RAW sock; and the codes are clear, not need the comments Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
David S. Miller authored
Cyrille Pitchen says: ==================== net/macb: add HW features to macb driver this series of patches adds new hardware features to macb driver. These features can be enabled/disabled at runtime using ethtool. Depending on hardware and design configuration, some are enabled by default whereas other are disabled. For instance, checksum offload features are enabled by default for gem designed for packet buffer mode but disabled for fifo mode design or for old macb. Besides, the scatter-gather feature is enabled and tested on macb but disabled on sama5d3x gem. When testing this feature on sama5d3x gem, TX lockups occured frequently. Also, the RX checksum offload feature is enabled at GEM level only when both IFF_PROMISC bit is clear in dev->flags and NETIF_F_RXCSUM bit is set in dev->features. ==================== Signed-off-by: -
Cyrille Pitchen authored
Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by:
-
Cyrille Pitchen authored
this new compatibility string prevents macb/gem driver from using the scatter-gather and gso features on sama5d3x boards. Signed-off-by:
-
