- 23 Mar, 2011 1 commit
-
-
Florian Westphal authored
This avoids explicit cast to avoid 'discards qualifiers' compiler warning in a netfilter patch that i've been working on. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Mar, 2011 19 commits
-
-
Julian Anastasov authored
Optimize the calling of fib_add_ifaddr for all secondary addresses after the promoted one to start from their place, not from the new place of the promoted secondary. It will save some CPU cycles because we are sure the promoted secondary was first for the subnet and all next secondaries do not change their place. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
The secondary address promotion relies on fib_sync_down_addr to remove all routes created for the secondary addresses when the old primary address is deleted. It does not happen for cases when the primary address is also in another subnet. Fix that by deleting local and broadcast routes for all secondaries while they are on device list and by faking that all addresses from this subnet are to be deleted. It relies on fib_del_ifaddr being able to ignore the IPs from the concerned subnet while checking for duplication. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Alex Sidorenko reported for problems with local routes left after IP addresses are deleted. It happens when same IPs are used in more than one subnet for the device. Fix fib_del_ifaddr to restrict the checks for duplicate local and broadcast addresses only to the IFAs that use our primary IFA or another primary IFA with same address. And we expect the prefsrc to be matched when the routes are deleted because it is possible they to differ only by prefsrc. This patch prevents local and broadcast routes to be leaked until their primary IP is deleted finally from the box. As the secondary address promotion needs to delete the routes for all secondaries that used the old primary IFA, add option to ignore these secondaries from the checks and to assume they are already deleted, so that we can safely delete the route while these IFAs are still on the device list. Reported-by: Alex Sidorenko <alexandre.sidorenko@hp.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
fib_table_delete forgets to match the routes by prefsrc. Callers can specify known IP in fc_prefsrc and we should remove the exact route. This is needed for cases when same local or broadcast addresses are used in different subnets and the routes differ only in prefsrc. All callers that do not provide fc_prefsrc will ignore the route prefsrc as before and will delete the first occurence. That is how the ip route del default magic works. Current callers are: - ip_rt_ioctl where rtentry_to_fib_config provides fc_prefsrc only when the provided device name matches IP label with colon. - inet_rtm_delroute where RTA_PREFSRC is optional too - fib_magic which deals with routes when deleting addresses and where the fc_prefsrc is always set with the primary IP for the concerned IFA. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marc Zyngier authored
The set_multicast operation performs asynchronous writes to the device, with some addresses pointing to the stack. Bad things may happen, and this is trapped CONFIG_DMA_API_DEBUG: [ 5.237762] WARNING: at /build/buildd/linux-linaro-omap-2.6.38/lib/dma-debug.c:867 check_for_stack+0xd4/0x100() [ 5.237792] ehci-omap ehci-omap.0: DMA-API: device driver maps memory fromstack [addr=d9c77dec] [ 5.237792] Modules linked in: smsc95xx(+) usbnet twl6030_usb twl4030_pwrbutton leds_gpio omap_wdt omap2_mcspi [ 5.237854] [<c006d618>] (unwind_backtrace+0x0/0xf8) from [<c00a6a14>] (warn_slowpath_common+0x54/0x64) [ 5.237884] [<c00a6a14>] (warn_slowpath_common+0x54/0x64) from [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) [ 5.237915] [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) from [<c034e9d8>] (check_for_stack+0xd4/0x100) [ 5.237915] [<c034e9d8>] (check_for_stack+0xd4/0x100) from [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) [ 5.237976] [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) from [<c04242f0>] (map_urb_for_dma+0x26c/0x304) [ 5.237976] [<c04242f0>] (map_urb_for_dma+0x26c/0x304) from [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) [ 5.238037] [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) from [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) [ 5.238067] [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) from [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) [ 5.238098] [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) from [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) [ 5.238128] [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) from [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) [ 5.238159] [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) from [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) [ 5.238220] [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) from [<c0429078>] (usb_probe_interface+0xe4/0x1c4) [ 5.238250] [<c0429078>] (usb_probe_interface+0xe4/0x1c4) from [<c03a8770>] (really_probe+0x64/0x160) [ 5.238250] [<c03a8770>] (really_probe+0x64/0x160) from [<c03a8a30>] (driver_probe_device+0x48/0x60) [ 5.238281] [<c03a8a30>] (driver_probe_device+0x48/0x60) from [<c03a8ad4>] (__driver_attach+0x8c/0x90) [ 5.238311] [<c03a8ad4>] (__driver_attach+0x8c/0x90) from [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) [ 5.238311] [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) from [<c03a82ec>] (bus_add_driver+0x190/0x250) [ 5.238311] [<c03a82ec>] (bus_add_driver+0x190/0x250) from [<c03a8cf8>] (driver_register+0x78/0x13c) [ 5.238433] [<c03a8cf8>] (driver_register+0x78/0x13c) from [<c0428040>] (usb_register_driver+0x78/0x13c) [ 5.238464] [<c0428040>] (usb_register_driver+0x78/0x13c) from [<c005b680>] (do_one_initcall+0x34/0x188) [ 5.238494] [<c005b680>] (do_one_initcall+0x34/0x188) from [<c00e11f0>] (sys_init_module+0xb0/0x1c0) [ 5.238525] [<c00e11f0>] (sys_init_module+0xb0/0x1c0) from [<c0065c40>] (ret_fast_syscall+0x0/0x30) Move the two offenders to the private structure which is kmalloc-ed, and thus safe. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
Implement compatibility with new hw_features for dev_disable_lro(). This is a transition path - dev_disable_lro() should be later integrated into netdev_fix_features() after all drivers are converted. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
As part of the work to make IPVS network namespace aware __ip_vs_app_mutex was replaced by a per-namespace lock, ipvs->app_mutex. ipvs->app_key is also supplied for debugging purposes. Unfortunately this implementation results in ipvs->app_key residing in non-static storage which at the very least causes a lockdep warning. This patch takes the rather heavy-handed approach of reinstating __ip_vs_app_mutex which will cover access to the ipvs->list_head of all network namespaces. [ 12.610000] IPVS: Creating netns size=2456 id=0 [ 12.630000] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 12.640000] BUG: key ffff880003bbf1a0 not in .data! [ 12.640000] ------------[ cut here ]------------ [ 12.640000] WARNING: at kernel/lockdep.c:2701 lockdep_init_map+0x37b/0x570() [ 12.640000] Hardware name: Bochs [ 12.640000] Pid: 1, comm: swapper Tainted: G W 2.6.38-kexec-06330-g69b7efe-dirty #122 [ 12.650000] Call Trace: [ 12.650000] [<ffffffff8102e685>] warn_slowpath_common+0x75/0xb0 [ 12.650000] [<ffffffff8102e6d5>] warn_slowpath_null+0x15/0x20 [ 12.650000] [<ffffffff8105967b>] lockdep_init_map+0x37b/0x570 [ 12.650000] [<ffffffff8105829d>] ? trace_hardirqs_on+0xd/0x10 [ 12.650000] [<ffffffff81055ad8>] debug_mutex_init+0x38/0x50 [ 12.650000] [<ffffffff8104bc4c>] __mutex_init+0x5c/0x70 [ 12.650000] [<ffffffff81685ee7>] __ip_vs_app_init+0x64/0x86 [ 12.660000] [<ffffffff81685a3b>] ? ip_vs_init+0x0/0xff [ 12.660000] [<ffffffff811b1c33>] T.620+0x43/0x170 [ 12.660000] [<ffffffff811b1e9a>] ? register_pernet_subsys+0x1a/0x40 [ 12.660000] [<ffffffff81685a3b>] ? ip_vs_init+0x0/0xff [ 12.660000] [<ffffffff81685a3b>] ? ip_vs_init+0x0/0xff [ 12.660000] [<ffffffff811b1db7>] register_pernet_operations+0x57/0xb0 [ 12.660000] [<ffffffff81685a3b>] ? ip_vs_init+0x0/0xff [ 12.670000] [<ffffffff811b1ea9>] register_pernet_subsys+0x29/0x40 [ 12.670000] [<ffffffff81685f19>] ip_vs_app_init+0x10/0x12 [ 12.670000] [<ffffffff81685a87>] ip_vs_init+0x4c/0xff [ 12.670000] [<ffffffff8166562c>] do_one_initcall+0x7a/0x12e [ 12.670000] [<ffffffff8166583e>] kernel_init+0x13e/0x1c2 [ 12.670000] [<ffffffff8128c134>] kernel_thread_helper+0x4/0x10 [ 12.670000] [<ffffffff8128ad40>] ? restore_args+0x0/0x30 [ 12.680000] [<ffffffff81665700>] ? kernel_init+0x0/0x1c2 [ 12.680000] [<ffffffff8128c130>] ? kernel_thread_helper+0x0/0x1global0 Signed-off-by: Simon Horman <horms@verge.net.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: Hans Schillstrom <hans@schillstrom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Commit 44540960 "veth: move loopback logic to common location" introduced a bug in the packet counters. I don't understand why that happened as it is not explained in the comments and the mut check in dev_forward_skb retains the assumption that skb->len is the total length of the packet. I just measured this emperically by setting up a veth pair between two noop network namespaces setting and attempting a telnet connection between the two. I saw three packets in each direction and the byte counters were exactly 14*3 = 42 bytes high in each direction. I got the actual packet lengths with tcpdump. So remove the extra ETH_HLEN from the veth byte count totals. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
When I was fixing issues with unregisgtering tables under /proc/sys/net/ipv6/neigh by adding a mount point it appears I missed a critical ordering issue, in the ipv6 initialization. I had not realized that ipv6_sysctl_register is called at the very end of the ipv6 initialization and in particular after we call neigh_sysctl_register from ndisc_init. "neigh" needs to be initialized in ipv6_static_sysctl_register which is the first ipv6 table to initialized, and definitely before ndisc_init. This removes the weirdness of duplicate tables while still providing a "neigh" mount point which prevents races in sysctl unregistering. This was initially reported at https://bugzilla.kernel.org/show_bug.cgi?id=31232 Reported-by: sunkan@zappa.cx Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
When the macvlan driver was extended to call unregisgter_netdevice_queue in 23289a37, a use after free of struct macvlan_port was introduced. The code in dellink relied on unregister_netdevice actually unregistering the net device so it would be safe to free macvlan_port. Since unregister_netdevice_queue can just queue up the unregister instead of performing the unregiser immediately we free the macvlan_port too soon and then the code in macvlan_stop removes the macaddress for the set of macaddress to listen for and uses memory that has already been freed. To fix this add a reference count to track when it is safe to free the macvlan_port and move the call of macvlan_port_destroy into macvlan_uninit which is guaranteed to be called after the final macvlan_port_close. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
It was pointed out to me recently that my spelling could be better :) Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jan Altenberg authored
I ran into some trouble while testing the SocketCAN driver for the BOSCH C_CAN controller. The interface is not correctly initialized, if I put some CAN traffic on the line, _while_ the interface is being started (which means: the interface doesn't come up correcty, if there's some RX traffic while doing 'ifconfig can0 up'). The current implementation enables the controller interrupts _before_ doing the basic c_can configuration. I think, this should be done the other way round. The patch below fixes things for me. Signed-off-by: Jan Altenberg <jan@linutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The BKL removal in appletalk introduced a use-after-free problem, where atalk_destroy_socket frees a sock, but we still release the socket lock on it. An easy fix is to take an extra reference on the sock and sock_put it when returning from atalk_release. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit b0d0d915 (remove the BKL) added a regression, because sock_put() can free memory while we are going to use it later. Fix is to delay sock_put() _after_ release_sock(). Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We dont need to test if we run from softirq context, we definitely are. This saves few instructions in ip_rcv() & ip_rcv_finish() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
James Chapman authored
A struct used in the l2tp_eth driver for registering network namespace ops was incorrectly marked as __net_initdata, leading to oops when module unloaded. BUG: unable to handle kernel paging request at ffffffffa00ec098 IP: [<ffffffff8123dbd8>] ops_exit_list+0x7/0x4b PGD 142d067 PUD 1431063 PMD 195da8067 PTE 0 Oops: 0000 [#1] SMP last sysfs file: /sys/module/l2tp_eth/refcnt Call Trace: [<ffffffff8123dc94>] ? unregister_pernet_operations+0x32/0x93 [<ffffffff8123dd20>] ? unregister_pernet_device+0x2b/0x38 [<ffffffff81068b6e>] ? sys_delete_module+0x1b8/0x222 [<ffffffff810c7300>] ? do_munmap+0x254/0x318 [<ffffffff812c64e5>] ? page_fault+0x25/0x30 [<ffffffff812c6952>] ? system_call_fastpath+0x16/0x1b Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Commit 'xfrm: Move IPsec replay detection functions to a separate file' (9fdc4883) introduce repl field to struct xfrm_state, and only initialize it under SA's netlink create path, the other path, such as pf_key, ipcomp/ipcomp6 etc, the repl field remaining uninitialize. So if the SA is created by pf_key, any input packet with SA's encryption algorithm will cause panic. int xfrm_input() { ... x->repl->advance(x, seq); ... } This patch fixed it by introduce new function __xfrm_init_state(). Pid: 0, comm: swapper Not tainted 2.6.38-next+ #14 Bochs Bochs EIP: 0060:[<c078e5d5>] EFLAGS: 00010206 CPU: 0 EIP is at xfrm_input+0x31c/0x4cc EAX: dd839c00 EBX: 00000084 ECX: 00000000 EDX: 01000000 ESI: dd839c00 EDI: de3a0780 EBP: dec1de88 ESP: dec1de64 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09c0f20 task.ti=c0992000) Stack: 00000000 00000000 00000002 c0ba27c0 00100000 01000000 de3a0798 c0ba27c0 00000033 dec1de98 c0786848 00000000 de3a0780 dec1dea4 c0786868 00000000 dec1debc c074ee56 e1da6b8c de3a0780 c074ed44 de3a07a8 dec1decc c074ef32 Call Trace: [<c0786848>] xfrm4_rcv_encap+0x22/0x27 [<c0786868>] xfrm4_rcv+0x1b/0x1d [<c074ee56>] ip_local_deliver_finish+0x112/0x1b1 [<c074ed44>] ? ip_local_deliver_finish+0x0/0x1b1 [<c074ef32>] NF_HOOK.clone.1+0x3d/0x44 [<c074ef77>] ip_local_deliver+0x3e/0x44 [<c074ed44>] ? ip_local_deliver_finish+0x0/0x1b1 [<c074ec03>] ip_rcv_finish+0x30a/0x332 [<c074e8f9>] ? ip_rcv_finish+0x0/0x332 [<c074ef32>] NF_HOOK.clone.1+0x3d/0x44 [<c074f188>] ip_rcv+0x20b/0x247 [<c074e8f9>] ? ip_rcv_finish+0x0/0x332 [<c072797d>] __netif_receive_skb+0x373/0x399 [<c0727bc1>] netif_receive_skb+0x4b/0x51 [<e0817e2a>] cp_rx_poll+0x210/0x2c4 [8139cp] [<c072818f>] net_rx_action+0x9a/0x17d [<c0445b5c>] __do_softirq+0xa1/0x149 [<c0445abb>] ? __do_softirq+0x0/0x149 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
- 21 Mar, 2011 11 commits
-
-
Felix Fietkau authored
This field is used to determine the inactivity time. When in AP mode, hostapd uses it for kicking out inactive clients after a while. Without this patch, hostapd immediately deauthenticates a new client if it checks the inactivity time before the client sends its first data frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
Kernel panic occurs just after AR2427 establishes connection with AP. Unless aggregation is enabled we don't initialize the TID structure. Thus accesing the elements of the TID structure when aggregation is disabled, leads to NULL pointer dereferencing. [ 191.320358] Call Trace: [ 191.320364] [<fd250ea7>] ? ath9k_tx+0xa7/0x200 [ath9k] [ 191.320376] [<fd1ec7fc>] ? __ieee80211_tx+0x5c/0x1e0 [mac80211] [ 191.320386] [<fd1edd2b>] ? ieee80211_tx+0x7b/0x90 [mac80211] [ 191.320395] [<fd1edddd>] ? ieee80211_xmit+0x9d/0x1d0 [mac80211] [ 191.320401] [<c014218f>] ? wake_up_state+0xf/0x20 [ 191.320405] [<c015dbc8>] ? signal_wake_up+0x28/0x40 [ 191.320410] [<c012a578>] ? default_spin_lock_flags+0x8/0x10 [ 191.320420] [<fd1ee308>] ? ieee80211_subif_start_xmit+0x2e8/0x7c0 [mac80211] [ 191.320425] [<c058f905>] ? do_page_fault+0x295/0x3a0 [ 191.320431] [<c04c4a3d>] ? dev_hard_start_xmit+0x1ad/0x210 [ 191.320436] [<c04d96b5>] ? sch_direct_xmit+0x105/0x170 [ 191.320445] [<fd1f161a>] ? get_sta_flags+0x2a/0x40 [mac80211] [ 191.320449] [<c04c780f>] ? dev_queue_xmit+0x37f/0x4b0 [ 191.320452] [<c04d75b0>] ? eth_header+0x0/0xb0 [ 191.320456] [<c04cc479>] ? neigh_resolve_output+0xe9/0x310 [ 191.320461] [<c053d295>] ? ip6_output_finish+0xa5/0x110 [ 191.320464] [<c053e354>] ? ip6_output2+0x134/0x250 [ 191.320468] [<c053f7dd>] ? ip6_output+0x6d/0x100 [ 191.320471] [<c0559665>] ? mld_sendpack+0x395/0x3e0 [ 191.320475] [<c0557f81>] ? add_grhead+0x31/0xa0 [ 191.320478] [<c055a83c>] ? mld_send_cr+0x1bc/0x2b0 [ 191.320482] [<c01535d9>] ? irq_exit+0x39/0x70 [ 191.320485] [<c055a940>] ? mld_ifc_timer_expire+0x10/0x40 [ 191.320489] [<c015b92e>] ? run_timer_softirq+0x13e/0x2c0 [ 191.320493] [<c0103a30>] ? common_interrupt+0x30/0x40 [ 191.320498] [<c055a930>] ? mld_ifc_timer_expire+0x0/0x40 [ 191.320502] [<c0153358>] ? __do_softirq+0x98/0x1b0 [ 191.320506] [<c01534b5>] ? do_softirq+0x45/0x50 [ 191.320509] [<c0153605>] ? irq_exit+0x65/0x70 [ 191.320513] [<c05917dc>] ? smp_apic_timer_interrupt+0x5c/0x8b [ 191.320516] [<c0103df1>] ? apic_timer_interrupt+0x31/0x40 [ 191.320521] [<c016007b>] ? k_getrusage+0x12b/0x2f0 [ 191.320525] [<c039e384>] ? acpi_idle_enter_simple+0x117/0x148 [ 191.320529] [<c04a20da>] ? cpuidle_idle_call+0x7a/0x100 [ 191.320532] [<c01021d4>] ? cpu_idle+0x94/0xd0 [ 191.320536] [<c057ab88>] ? rest_init+0x58/0x60 [ 191.320541] [<c07a58ec>] ? start_kernel+0x351/0x357 [ 191.320544] [<c07a53c7>] ? unknown_bootoption+0x0/0x19e [ 191.320548] [<c07a50aa>] ? i386_start_kernel+0xaa/0xb1 [ 191.320550] Code: 03 66 3d 00 03 0f 84 7c 02 00 00 83 c3 18 0f b6 03 8b 4d e0 89 c3 83 e3 0f 6b c3 48 89 5d d8 8d 04 06 8d 50 0c 89 55 d0 8b 40 20 <8b> 00 3b 01 0f 85 8e 02 00 00 f6 47 20 40 0f 84 29 ff ff ff 8b [ 191.320634] EIP: [<fd2586d4>] ath_tx_start+0x474/0x770 [ath9k] SS:ESP 0068:c0761a90 [ 191.320642] CR2: 0000000000000000 [ 191.320647] ---[ end trace 9296ef23b9076ece ]--- [ 191.320650] Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Randy Dunlap authored
Fix many of each of these warnings: Warning(include/net/cfg80211.h:519): No description found for parameter 'rxrate' Warning(include/net/mac80211.h:1163): bad line: Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilia Mirkin authored
These were found using the following semantic match: // <smpl> @@expression E1; type T;@@ * memset(E1, ... * sizeof(T) * ..., ...); // </smpl> Also take this opportunity to remove the unnecessary void* casts. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Lemenkov authored
Add unknown Toshiba device, mentioned in rt3572sta sources, under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Lemenkov authored
Add 2L Central Europe BV 8070 under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Lemenkov authored
Add Planex Communications, Inc. RT8070 under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Lemenkov authored
Add ID for Asus USB-N11 Wi-FI adapter. Tested by me. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Joe Gunn authored
Removing an entry from the scan_list should be performed while holding the lock. Signed-off-by: Joseph J. Gunn <armadefuego@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
We should unlock here instead of returning -EINVAL directly. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tõnu Samuel authored
Signed-off-by: Tõnu Samuel <tonu@jes.ee> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 20 Mar, 2011 7 commits
-
-
-
-
Vasiliy Kulikov authored
'buffer' string is copied from userspace. It is not checked whether it is zero terminated. This may lead to overflow inside of simple_strtoul(). Changli Gao suggested to copy not more than user supplied 'size' bytes. It was introduced before the git epoch. Files "ipt_CLUSTERIP/*" are root writable only by default, however, on some setups permissions might be relaxed to e.g. network admin user. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Eric Dumazet authored
commit f3c5c1bf (make ip_tables reentrant) introduced a race in handling the stackptr restore, at the end of ipt_do_table() We should do it before the call to xt_info_rdunlock_bh(), or we allow cpu preemption and another cpu overwrites stackptr of original one. A second fix is to change the underflow test to check the origptr value instead of 0 to detect underflow, or else we allow a jump from different hooks. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Jozsef Kadlecsik authored
The revision of the set type was not checked at the create command: if the userspace sent a valid set type but with not supported revision number, it'd create a loop. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Jozsef Kadlecsik authored
The hash:*port* types with IPv4 silently ignored when address ranges with non TCP/UDP were added/deleted from the set and used the first address from the range only. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
David S. Miller authored
When the OF device driver bits were converted over to the platform device infrastructure in commit 74888760 ("dt/net: Eliminate users of of_platform_{,un}register_driver") we inadvertantly created probing problems in the OF case. The NIU driver creates a dummy platform device to represent the board that contains one or more child NIU devices. Unfortunately we use the same name, "niu", as the OF device driver itself uses. The result is that we try to probe the dummy "niu" parent device we create, and since it has a NULL ofdevice pointer etc. everything explodes: [783019.128243] niu: niu.c:v1.1 (Apr 22, 2010) [783019.128810] Unable to handle kernel NULL pointer dereference [783019.128949] tsk->{mm,active_mm}->context = 000000000000039e [783019.129078] tsk->{mm,active_mm}->pgd = fffff803afc5a000 [783019.129206] \|/ ____ \|/ [783019.129213] "@'/ .. \`@" [783019.129220] /_| \__/ |_\ [783019.129226] \__U_/ [783019.129378] modprobe(2004): Oops [#1] [783019.129423] TSTATE: 0000000011001602 TPC: 0000000010052ff8 TNPC: 000000000061bbb4 Y: 00000000 Not tainted [783019.129542] TPC: <niu_of_probe+0x3c/0x2dc [niu]> [783019.129624] g0: 8080000000000000 g1: 0000000000000000 g2: 0000000010056000 g3: 0000000000000002 [783019.129733] g4: fffff803fc1da0c0 g5: fffff800441e2000 g6: fffff803fba84000 g7: 0000000000000000 [783019.129842] o0: fffff803fe7df010 o1: 0000000010055700 o2: 0000000000000000 o3: fffff803fbacaca0 [783019.129951] o4: 0000000000000080 o5: 0000000000777908 sp: fffff803fba866e1 ret_pc: 0000000010052ff4 [783019.130083] RPC: <niu_of_probe+0x38/0x2dc [niu]> [783019.130165] l0: fffff803fe7df010 l1: fffff803fbacafc0 l2: fffff803fbacaca0 l3: ffffffffffffffed [783019.130273] l4: 0000000000000000 l5: 000000007fffffff l6: fffff803fba86f40 l7: 0000000000000001 [783019.130382] i0: fffff803fe7df000 i1: fffff803fc20aba0 i2: 0000000000000000 i3: 0000000000000001 [783019.130490] i4: 0000000000000000 i5: 0000000000000000 i6: fffff803fba867a1 i7: 000000000062038c [783019.130614] I7: <platform_drv_probe+0xc/0x20> Fix by simply renaming the parent device to "niu-board". Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Mar, 2011 2 commits
-
-
Eric Dumazet authored
commit 54405cde (r8169: support control of advertising.) introduced a bug in rtl8169_init_phy() Reported-by: Piotr Hosowicz <piotr@hosowicz.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Tested-by: Piotr Hosowicz <piotr@hosowicz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas de Pesloüan authored
Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-