This patch implements the recommended workaround for erratum 411920
(ARM1136, ARM1156, ARM1176).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Update NAND partitioning for the dm6446 evm, unmasking the hidden
data at the beginning and letting the kernel be updated from Linux.

 - This is boot-compatible with TI's software (U-Boot 1.20 and both
   the 2.6.10 and 2.6.18 kernels), in terms of startup and loading
   kernels from flash.

 - In the same way, it's also boot-compatible with mainline U-Boot,
   which stores U-Boot params in block 0 not block 16.

 - It's not quite compatible with systems that previously used NAND
   partitions to hold (filesystem) data.  The compatibilities are a
   bit different based on which kernel was used previously
     + Users of TI/MV kernels no longer see mtd2 "params"
       (mainline u-boot env is in a different place)
	* Filesystem is now mtd2 ... vs mtd3
     + Users of GIT kernels now see mtd0 and mtd1 partitions
	* Filesystem partition starts 640 KBytes earlier
	* Filesystem is now mtd2 ... vs mtd0
     * Linux now *uses* the flash-resident BBT
	* Removes annoying slowdown/hiccup during boot
	* Potentially ~64KB less space available with TI/MV kernels

If you *used* NAND partitions from Linux, there is no solution that's
fully compatible with all previous kernels in those respects ... ergo
this "best compromise".  It'd be good to back back up the filesystem
data; or, carry your own backwards-compatibility patch for awhile.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Rework DM644x code into SoC specific and board specific parts.
This is also to generalize the structure a bit so it's easier to add
support for new SoCs in the DaVinci family.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Rename DM6446 EVM board file, no functional changes.  Code is updated
and reworked in following patch.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Update MUX support to be more general and useful across multiple
SoCs in the DaVinci family.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Adding IRQ defintions for DaVinci DM355 and default interrupt
priorities for DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Clear any set bits in the 'NEXT' field of the MDCTL register in the
Power and Sleep Controller (PSC) before setting any new bits.
This also allows some minor cleanup by removing some no longer
needed lines of code.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Update the DaVinci GPIO code to work better on non-dm6446 parts,
notably the dm355:

 - Only handle the number of GPIOs the chip actually has.  So
   for example on dm6467, GPIO-42 is the last GPIO, and trying
   to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446.

 - Enable GPIO interrupts on each 16-bit GPIO-irq bank ...
   previously, only the first five were enabled, so GPIO-80
   and above (on dm355) wouldn't trigger IRQs.

 - Use the right IRQ for each GPIO bank.  The wrong values were
   used for dm355 chips, so GPIO IRQs got routed incorrectly.

 - Handle up to four pairs of 16-bit GPIO banks ... previously
   only three were handled, so accessing GPIO-96 and up (e.g. on
   dm355) would oops.

 - Update several comments that were dm6446-specific.

Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs
on the DM355 EVM.

One thing this doesn't do is handle the way some of the GPIO
numbers on dm6467 are reserved but aren't valid as GPIOs.  Some
bitmap logic could fix that if needed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Original code for 2.6.10 and 2.6.28 series done by Texas Instruments
and MontaVista, but major updates and rework done by Troy Kisky and
David Brownell.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Use clock framework instead of hard-coded CLOCK_TICK_RATE for
determining timer tick frequencies.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Eric Miao <eric.miao@marvell.com>

Signed-off-by: Eric Miao <eric.miao@marvell.com>

GPIO17_SDATA_IN_1 and GPIO36_SDATA_IN_1 are originally designed for the 2nd
codec but unused on the board, yet they are initialized incorrectly by the
bootloader as the SDATA_IN_1 alternate function, thus causing AC97 fail to
work. Fix this issue by configuring these pins as normal GPIO to avoid the
noise from these pins being treated as signals from the 2nd codec.
Signed-off-by: Eric Miao <eric.miao@marvell.com>

Signed-off-by: Eric Miao <eric.miao@marvell.com>

cpufreq drivers for pxa2xx/3xx are now built-in automatically as soon as
CPU_FREQ is enabled.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

ARCH_PXA selects HAVE_CLK and COMMON_CLKDEV twice in arch/arm/Kconfig.
Remove the second entry.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

pxa_gpio_irq_type() and pxa_unmask_muxed_gpio() will touch non-muxed GPIOs
(0 and 1 on PXA2xx/PXA3xx) bits in GRERx and GFERx, which is incorrect.
Actually, only those bits should get updated if the corresponding bits are
set in c->irq_mask as well. Fix this by updating only those relevant bits.
Reported-and-tested-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

arch/arm/mach-sa1100/lart.c:36: error: 'PAGE_SHIFT' undeclared here (not in a function)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: add parameter to microblaze_read()
  microblaze: Use CFLAGS_KERNEL instead of CFLAGS
  microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too
  microblaze: Do not check use_dcache
  microblaze: Do not use PVR configuration for broken MB version
  microblaze: Fix USR1/2 pvr printing message
  microblaze: iowrite upon timeout
  microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig
  microblaze: Remove redundant variable
  microblaze: Move start_thread to process.c
  microblaze: Add missing preadv and pwritev syscalls
  microblaze: Add missing declaration for die and _exception func
  microblaze: Remove sparse error in traps.c
  microblaze: Move task_pt_regs up
  microblaze: Rename kernel_mode to pt_mode in pt_regs
  microblaze: Remove uncache shadow condition
  microblaze: Remove while(1) loop from show_regs function
  microblaze: Remove unneded per cpu SYSCALL_SAVE variable

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
  ACPI, i915: Register ACPI video even when not modesetting
  Revert "ACPICA: delete check for AML access to port 0x81-83"
  I/O port protection: update for windows compatibility.
  sony-laptop: always try to unblock rfkill on load
  sony-laptop: fix bogus error message display on resume
  ACPI: EC: Fix ACPI EC resume non-query interrupt message
  sony-laptop: SNC input event 38 fix
  sony-laptop: SNC 127 Initialization Fix
  sony-laptop: Duplicate SNC 127 Event Fix
  ACPI: prevent processor.max_cstate=0 boot crash
  ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M
  ACPI: delete obsolete "bus master activity" proc field
  ACPI: idle: mark_tsc_unstable() at init-time, not run-time
  ACPI: add /sys/firmware/acpi/interrupts/sci_not counter
  ACPI video: fix an error when the brightness levels on AC and on Battery are same
  acpi-cpufreq: Do not let get_measured perf depend on internal variable
  acpi-cpufreq: style-only: add parens to math expression
  acpi-cpufreq: Cleanup: Use printk_once
  x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf
  thinkpad-acpi: bump up version to 0.23
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: update the default config for the ColdFire 5407C3 board
  m68knommu: update the default config for the ColdFire 5307C3 board
  m68knommu: update the default config for the ColdFire 5257EVB board
  m68knommu: update the default config for the ColdFire 5249EVB.
  m68knommu: add a defconfig for the ColdFire M5272C3 board
  m68knommu: update the defconfig for the ColdFire 5208evb board
  m68knommu: fix DMA support for ColdFire
  m68knommu: remove unused kernel stats offsets
  m68knommu: fix missing .data.cacheline_aligned section
  m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix potential inode allocation soft lockup in Orlov allocator
  ext4: Make the extent validity check more paranoid
  jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records
  jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records
  ext4: really print the find_group_flex fallback warning only once

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5460/1: Orion: reduce namespace pollution
  [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config
  [ARM] 5457/1: mach-imx gpio buildfix
  [ARM] 5456/1: add sys_preadv and sys_pwritev
  [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones
  [ARM] pxa/palm27x: General fix for Palm27x aSoC driver
  [ARM] pxa/mioa701: use GPIO95 as AC97 reset line
  [ARM] pxa: merge AC97 platform data structures
  [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: pwc : do not pass stack allocated buffers to USB core.
  USB: otg: Fix bug on remove path without transceiver
  USB: correct error handling in cdc-wdm
  USB: removal of tty->low_latency hack dating back to the old serial code
  USB: serial: sierra driver bug fix for composite interface
  USB: gadget: omap_udc uses platform_driver_probe()
  USB: ci13xxx_udc: fix build error
  USB: musb: Prevent multiple includes of musb.h
  USB: pass mem_flags to dma_alloc_coherent
  USB: g_file_storage: fix use-after-free bug when closing files
  USB: ehci-sched.c: EHCI SITD scheduling bugfix
  USB: fix mos7840 problem with minor numbers
  USB: mos7840: add new device id
  USB: musb: fix build when !CONFIG_PM
  USB: musb: Remove my email address from few musb related drivers
  USB: Gadget: MIPS CI13xxx UDC bugfixes
  USB: Unusual Device support for Gold MP3 Player Energy
  USB: serial: fix lifetime and locking problems

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Larger buffer for encrypted symlink targets
  eCryptfs: Lock lower directory inode mutex during lookup
  eCryptfs: Remove ecryptfs_unlink_sigs warnings
  eCryptfs: Fix data corruption when using ecryptfs_passthrough
  eCryptfs: Print FNEK sig properly in /proc/mounts
  eCryptfs: NULL pointer dereference in ecryptfs_send_miscdev()
  eCryptfs: Copy lower inode attrs before dentry instantiation

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Update defconfigs for 2.6.30-rc3
  m68k,m68knommu: Wire up preadv and pwritev
  scsi: a4000 - Correct driver unregistration in case of failure

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] update default configuration.
  [S390] omit frame pointers on s390 when possible
  [S390] Use tape_generic_offline directly.
  [S390] /proc/stat idle field for idle cpus
  [S390] appldata: avoid deadlock with appldata_mem
  [S390] ipl: fix compile breakage

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Ensure that the inode goal block settings are updated
  GFS2: Fix bug in block allocation
  bitops: Add __ffs64 bitop

* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Unregister cpufreq notifier on unload
  KVM: x86: release time_page on vcpu destruction
  KVM: Fix overlapping check for memory slots
  KVM: MMU: disable global page optimization
  KVM: ia64: fix locking order entering guest
  KVM: MMU: Fix off-by-one calculating large page count

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  MAINTAINERS: update IDE entry
  palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
  palm_bk3710: those registers/bitfields don't exist
  mediabay: fix build for CONFIG_BLOCK=n
  ide: Stop disks on reboot for laptop which cuts power
  ide-cd: fix kernel crash on hppa regression
  palm_bk3710: UDMA performance fix

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add quirk for Packard Bell RS65
  [ALSA] intel8x0: another attempt to fix ac97_clock measure routine
  [ALSA] ac97_codec: increase timeout for analog subsections
  ALSA: hda - Add quirks for Realtek codecs
  ALSA: hda - Fix alc662_init_verbs
  ALSA: keywest: Convert to new-style i2c driver
  ALSA: AOA: Convert onyx and tas codecs to new-style i2c drivers
  ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model)
  ALSA: us122l: add snd_us122l_free()
  ASoC: Fix warning in wm9705
  ASoC: OMAP: Update contact addresses
  ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR
  ALSA: us122l: Fix signedness in comparisions

The release path for a disconnected device frees the object then unlocks
the mutex in the freed object...

Found by Dan Carpenter using Smatch
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove my name and emailaddress from note in the source. Wincor Nixdorf
only has some ITE-chips on their mainboards, other chips are not
available for me for testing.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wrong types on IRQ handler
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>