- 10 Jun, 2016 2 commits
-
-
Majd Dibbiny authored
Mask the reserved bits when reading the number of newly created XRCD. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Majd Dibbiny authored
Add 16 reserved bytes at the end of mlx5_modify_qp_mbox_in to match the hardware spec definition. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Jun, 2016 11 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2016-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two more fixes for now: * a fix for a long-standing iwpriv 32/64 compat issue * two fairly recently introduced (4.6) warning asking for symmetric operations are erroneous and I remove them ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: couple of fixes Couple of fixes from Ido. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When rtnl_fill_ifinfo() is called for a certain netdevice it queries its various parameters such as switch id and physical port name. The function might get called in an atomic context, which means the underlying driver must not sleep during the query operation. Don't query the device and sleep during ndo_get_phys_port_name(), but instead store the needed parameters in port creation time. Fixes: 2bf9a586 ("mlxsw: spectrum: Add support for physical port names") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When a port is created following a split / unsplit we need to map it to the correct module and lane, enable it and then continue to initialize its various parameters such as MTU and VLAN filters. Under certain conditions, such as trying to split ports at the bottom row of the front panel by four, we get firmware errors. After evaluating this with the firmware team it was decided to alter the split / unsplit flow, so that first all the affected ports are mapped, then enabled and finally each is initialized separately. Fix the split / unsplit flow by first mapping and enabling all the affected ports. Newer firmware versions will support both flows. Fixes: 18f1e70c ("mlxsw: spectrum: Introduce port splitting") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Prasun Maiti authored
iwpriv app uses iw_point structure to send data to Kernel. The iw_point structure holds a pointer. For compatibility Kernel converts the pointer as required for WEXT IOCTLs (SIOCIWFIRST to SIOCIWLAST). Some drivers may use iw_handler_def.private_args to populate iwpriv commands instead of iw_handler_def.private. For those case, the IOCTLs from SIOCIWFIRSTPRIV to SIOCIWLASTPRIV will follow the path ndo_do_ioctl(). Accordingly when the filled up iw_point structure comes from 32 bit iwpriv to 64 bit Kernel, Kernel will not convert the pointer and sends it to driver. So, the driver may get the invalid data. The pointer conversion for the IOCTLs (SIOCIWFIRSTPRIV to SIOCIWLASTPRIV), which follow the path ndo_do_ioctl(), is mandatory. This patch adds pointer conversion from 32 bit to 64 bit and vice versa, if the ioctl comes from 32 bit iwpriv to 64 bit Kernel. Cc: stable@vger.kernel.org Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com> Signed-off-by: Ujjal Roy <royujjal@gmail.com> Tested-by: Dibyajyoti Ghosh <dibyajyotig@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Since set_tx_power and set_antenna are frequently implemented without the matching get_tx_power/get_antenna, we shouldn't have added warnings for those. Remove them. The remaining ones are correct and need to be implemented symmetrically for correct operation. Cc: stable@vger.kernel.org Fixes: de3bb771 ("cfg80211: add more warnings for inconsistent ops") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Florian Westphal authored
When we need to create a new aggregate to enqueue the skb we call kzalloc. If that fails we returned ENOBUFS without freeing the skb. Spotted during code review. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shweta Choudaha authored
The ip6 GRE tap device should not be forced to down state to change the mac address and should allow live address change for tap device similar to ipv4 gre. Signed-off-by: Shweta Choudaha <schoudah@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== incremental cls_u32 hardware offload fixes These are incremental changes from v1 of cls_u32 fixes. First patch is reposted in its entirety, patch 2 is an incremental change from patch 2 of the original series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Return an error if user requested skip-sw and the underlaying hardware cannot handle tc offloads (or offloads are disabled). This patch fixes the knode handling. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Errors reported by u32_replace_hw_hnode() were not propagated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Jun, 2016 9 commits
-
-
Bert Kenward authored
7000-series SFC NICs connected with an SFP+ module currently fail to report any supported link speeds. Reported-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
"make htmldocs" complains otherwise: .//net/core/gen_stats.c:65: warning: No description found for parameter 'padattr' .//net/core/gen_stats.c:101: warning: No description found for parameter 'padattr' Fixes: 9854518e ("sched: align nlattr properly when needed") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Sitnicki authored
At present we perform an xfrm_lookup() for each UDPv6 message we send. The lookup involves querying the flow cache (flow_cache_lookup) and, in case of a cache miss, creating an XFRM bundle. If we miss the flow cache, we can end up creating a new bundle and deriving the path MTU (xfrm_init_pmtu) from on an already transformed dst_entry, which we pass from the socket cache (sk->sk_dst_cache) down to xfrm_lookup(). This can happen only if we're caching the dst_entry in the socket, that is when we're using a connected UDP socket. To put it another way, the path MTU shrinks each time we miss the flow cache, which later on leads to incorrectly fragmented payload. It can be observed with ESPv6 in transport mode: 1) Set up a transformation and lower the MTU to trigger fragmentation # ip xfrm policy add dir out src ::1 dst ::1 \ tmpl src ::1 dst ::1 proto esp spi 1 # ip xfrm state add src ::1 dst ::1 \ proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b # ip link set dev lo mtu 1500 2) Monitor the packet flow and set up an UDP sink # tcpdump -ni lo -ttt & # socat udp6-listen:12345,fork /dev/null & 3) Send a datagram that needs fragmentation with a connected socket # perl -e 'print "@" x 1470 | socat - udp6:[::1]:12345 2016/06/07 18:52:52 socat[724] E read(3, 0x555bb3d5ba00, 8192): Protocol error 00:00:00.000000 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x2), length 1448 00:00:00.000014 IP6 ::1 > ::1: frag (1448|32) 00:00:00.000050 IP6 ::1 > ::1: ESP(spi=0x00000001,seq=0x3), length 1272 (^ ICMPv6 Parameter Problem) 00:00:00.000022 IP6 ::1 > ::1: ESP(spi=0x00000001,seq=0x5), length 136 4) Compare it to a non-connected socket # perl -e 'print "@" x 1500' | socat - udp6-sendto:[::1]:12345 00:00:40.535488 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x6), length 1448 00:00:00.000010 IP6 ::1 > ::1: frag (1448|64) What happens in step (3) is: 1) when connecting the socket in __ip6_datagram_connect(), we perform an XFRM lookup, miss the flow cache, create an XFRM bundle, and cache the destination, 2) afterwards, when sending the datagram, we perform an XFRM lookup, again, miss the flow cache (due to mismatch of flowi6_iif and flowi6_oif, which is an issue of its own), and recreate an XFRM bundle based on the cached (and already transformed) destination. To prevent the recreation of an XFRM bundle, avoid an XFRM lookup altogether whenever we already have a destination entry cached in the socket. This prevents the path MTU shrinkage and brings us on par with UDPv4. The fix also benefits connected PINGv6 sockets, another user of ip6_sk_dst_lookup_flow(), who also suffer messages being transformed twice. Joint work with Hannes Frederic Sowa. Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Unused fields of udp_cfg must be all zeros. Otherwise setup_udp_tunnel_sock() fills ->gro_receive and ->gro_complete callbacks with garbage, eventually resulting in panic when used by udp_gro_receive(). [ 72.694123] BUG: unable to handle kernel paging request at ffff880033f87d78 [ 72.695518] IP: [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] PGD 26e2067 PUD 26e3067 PMD 342ed063 PTE 8000000033f87163 [ 72.696530] Oops: 0011 [#1] SMP KASAN [ 72.696530] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pptp gre pppox ppp_generic slhc crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel evdev aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper serio_raw acpi_cpufreq button proc\ essor ext4 crc16 jbd2 mbcache virtio_blk virtio_net virtio_pci virtio_ring virtio [ 72.696530] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.7.0-rc1 #1 [ 72.696530] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 72.696530] task: ffff880035b59700 ti: ffff880035b70000 task.ti: ffff880035b70000 [ 72.696530] RIP: 0010:[<ffff880033f87d78>] [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP: 0018:ffff880035f87bc0 EFLAGS: 00010246 [ 72.696530] RAX: ffffed000698f996 RBX: ffff88003326b840 RCX: ffffffff814cc823 [ 72.696530] RDX: ffff88003326b840 RSI: ffff880033e48038 RDI: ffff880034c7c780 [ 72.696530] RBP: ffff880035f87c18 R08: 000000000000a506 R09: 0000000000000000 [ 72.696530] R10: ffff880035f87b38 R11: ffff880034b9344d R12: 00000000ebfea715 [ 72.696530] R13: 0000000000000000 R14: ffff880034c7c780 R15: 0000000000000000 [ 72.696530] FS: 0000000000000000(0000) GS:ffff880035f80000(0000) knlGS:0000000000000000 [ 72.696530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.696530] CR2: ffff880033f87d78 CR3: 0000000033c98000 CR4: 00000000000406a0 [ 72.696530] Stack: [ 72.696530] ffffffff814cc834 ffff880034b93468 0000001481416818 ffff88003326b874 [ 72.696530] ffff880034c7ccb0 ffff880033e48038 ffff88003326b840 ffff880034b93462 [ 72.696530] ffff88003326b88a ffff88003326b88c ffff880034b93468 ffff880035f87c70 [ 72.696530] Call Trace: [ 72.696530] <IRQ> [ 72.696530] [<ffffffff814cc834>] ? udp_gro_receive+0x1c6/0x1f9 [ 72.696530] [<ffffffff814ccb1c>] udp4_gro_receive+0x2b5/0x310 [ 72.696530] [<ffffffff814d989b>] inet_gro_receive+0x4a3/0x4cd [ 72.696530] [<ffffffff81431b32>] dev_gro_receive+0x584/0x7a3 [ 72.696530] [<ffffffff810adf7a>] ? __lock_is_held+0x29/0x64 [ 72.696530] [<ffffffff814321f7>] napi_gro_receive+0x124/0x21d [ 72.696530] [<ffffffffa000b145>] virtnet_receive+0x8df/0x8f6 [virtio_net] [ 72.696530] [<ffffffffa000b27e>] virtnet_poll+0x1d/0x8d [virtio_net] [ 72.696530] [<ffffffff81431350>] net_rx_action+0x15b/0x3b9 [ 72.696530] [<ffffffff815893d6>] __do_softirq+0x216/0x546 [ 72.696530] [<ffffffff81062392>] irq_exit+0x49/0xb6 [ 72.696530] [<ffffffff81588e9a>] do_IRQ+0xe2/0xfa [ 72.696530] [<ffffffff81587a49>] common_interrupt+0x89/0x89 [ 72.696530] <EOI> [ 72.696530] [<ffffffff810b05df>] ? trace_hardirqs_on_caller+0x229/0x270 [ 72.696530] [<ffffffff8102b3c7>] ? default_idle+0x1c/0x2d [ 72.696530] [<ffffffff8102b3c5>] ? default_idle+0x1a/0x2d [ 72.696530] [<ffffffff8102bb8c>] arch_cpu_idle+0xa/0xc [ 72.696530] [<ffffffff810a6c39>] default_idle_call+0x1a/0x1c [ 72.696530] [<ffffffff810a6d96>] cpu_startup_entry+0x15b/0x20f [ 72.696530] [<ffffffff81039a81>] start_secondary+0x12c/0x133 [ 72.696530] Code: ff ff ff ff ff ff ff ff ff ff 7f ff ff ff ff ff ff ff 7f 00 7e f8 33 00 88 ff ff 6d 61 58 81 ff ff ff ff 5e de 0a 81 ff ff ff ff <00> 5c e2 34 00 88 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 72.696530] RIP [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP <ffff880035f87bc0> [ 72.696530] CR2: ffff880033f87d78 [ 72.696530] ---[ end trace ad7758b9a1dccf99 ]--- [ 72.696530] Kernel panic - not syncing: Fatal exception in interrupt [ 72.696530] Kernel Offset: disabled [ 72.696530] ---[ end Kernel panic - not syncing: Fatal exception in interrupt v2: use empty initialiser instead of "{ NULL }" to avoid relying on first field's type. Fixes: 38fd2af2 ("udp: Add socket based GRO and config") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Dooks authored
The of_find_net_device_by_node() function is defined in <linux/of_net.h> but not included in the .c file that implements it. Fix the following warning by including the header: net/core/net-sysfs.c:1494:19: warning: symbol 'of_find_net_device_by_node' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshiaki Makita authored
The missing br_vlan_should_use() test caused creation of an unneeded local fdb entry on changing mac address of a bridge device when there is a vlan which is configured on a bridge port but not on the bridge device. Fixes: 2594e906 ("bridge: vlan: add per-vlan struct and move to rhashtables") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains two Netfilter/IPVS fixes for your net tree, they are: 1) Fix missing alignment in next offset calculation for standard targets, introduced in the previous merge window, patch from Florian Westphal. 2) Fix to correct the handling of outgoing connections which use the SIP-pe such that the binding of a real-server is updated when needed. This was an omission from changes introduced by Marco Angaroni in the previous merge window too, to allow handling of outgoing connections by the SIP-pe. Patch and report came via Simon Horman. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
The v6 tcp stats scan do not provide TLP and ER timer information correctly like the v4 version . This patch fixes that. Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)") Fixes: eed530b6 ("tcp: early retransmit") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Jun, 2016 18 commits
-
-
Daniel Borkmann authored
When offloading classifiers such as u32 or flower to hardware, and the qdisc is clsact (TC_H_CLSACT), then we need to differentiate its classes, since not all of them handle ingress, therefore we must leave those in software path. Add a .tcf_cl_offload() callback, so we can generically handle them, tested on ixgbe. Fixes: 10cbc684 ("net/sched: cls_flower: Hardware offloaded filters statistics support") Fixes: 5b33f488 ("net/flower: Introduce hardware offload support") Fixes: a1b7c5fd ("net: sched: add cls_u32 offload hooks for netdevs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
The police action is using its own code to initialize tcf hash info, which makes us to forgot to initialize a->hinfo correctly. Fix this by calling the helper function tcf_hash_create() directly. This patch fixed the following crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffff810c099f>] __lock_acquire+0xd3/0xf91 PGD d3c34067 PUD d3e18067 PMD 0 Oops: 0000 [#1] SMP CPU: 2 PID: 853 Comm: tc Not tainted 4.6.0+ #87 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d3e28040 ti: ffff8800d3f6c000 task.ti: ffff8800d3f6c000 RIP: 0010:[<ffffffff810c099f>] [<ffffffff810c099f>] __lock_acquire+0xd3/0xf91 RSP: 0000:ffff88011b203c80 EFLAGS: 00010002 RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000028 RBP: ffff88011b203d40 R08: 0000000000000001 R09: 0000000000000000 R10: ffff88011b203d58 R11: ffff88011b208000 R12: 0000000000000001 R13: ffff8800d3e28040 R14: 0000000000000028 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 00000000d4be1000 CR4: 00000000000006e0 Stack: ffff8800d3e289c0 0000000000000046 000000001b203d60 ffffffff00000000 0000000000000000 ffff880000000000 0000000000000000 ffffffff00000000 ffffffff8187142c ffff88011b203ce8 ffff88011b203ce8 ffffffff8101dbfc Call Trace: <IRQ> [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff8101dbfc>] ? native_sched_clock+0x1a/0x35 [<ffffffff8101dbfc>] ? native_sched_clock+0x1a/0x35 [<ffffffff810a9604>] ? sched_clock_local+0x11/0x78 [<ffffffff810bf6a1>] ? mark_lock+0x24/0x201 [<ffffffff810c1dbd>] lock_acquire+0x120/0x1b4 [<ffffffff810c1dbd>] ? lock_acquire+0x120/0x1b4 [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff81aad89f>] _raw_spin_lock_bh+0x3c/0x72 [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff8187142c>] __tcf_hash_release+0x77/0xd1 [<ffffffff81871a27>] tcf_action_destroy+0x49/0x7c [<ffffffff81870b1c>] tcf_exts_destroy+0x20/0x2d [<ffffffff8189273b>] u32_destroy_key+0x1b/0x4d [<ffffffff81892788>] u32_delete_key_freepf_rcu+0x1b/0x1d [<ffffffff810de3b8>] rcu_process_callbacks+0x610/0x82e [<ffffffff8189276d>] ? u32_destroy_key+0x4d/0x4d [<ffffffff81ab0bc1>] __do_softirq+0x191/0x3f4 Fixes: ddf97ccd ("net_sched: add network namespace support for tc actions") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We properly scan the flow list to count number of packets, but John passed 0 to gnet_stats_copy_queue() so we report a zero value to user space instead of the result. Fixes: 64015853 ("net: sched: restrict use of qstats qlen") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== cls_u32 hardware offload fixes This set fixes two small issues with error codes I noticed in cls_u32. Second patch could be viewed as user space API change but that portion of API is not part of any release, yet. Compile tested only. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Return an error if user requested skip-sw and the underlaying hardware cannot handle tc offloads (or offloads are disabled). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
'err' variable is not set in this test, we would return whatever previous test set 'err' to. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Fix clang build warning: ./include/uapi/linux/gtp.h:1:9: warning: '_UAPI_LINUX_GTP_H_' is used as a header guard here, followed by #define of a different macro [-Wheader-guard] fix by defining _UAPI_LINUX_GTP_H_ and not _UAPI_LINUX_GTP_H__ Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
trivial fix to spelling mistakes and add missing newline in pr_err messages Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes. Fix a race condition and VLAN rx acceleration logic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Since both CTAG and STAG rx acceleration must be enabled together, we only need to check one feature flag (NETIF_F_HW_VLAN_CTAG_RX) before calling __vlan_hwaccel_put_tag(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The hardware can only be set to strip or not strip both the VLAN CTAG and STAG. It cannot strip one and not strip the other. Add logic to bnxt_fix_features() to toggle both feature flags when the user is toggling one of them. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Set the is_push flag in the software BD before the tx data is pushed to the chip. It is possible to get the tx interrupt as soon as the tx data is pushed. The tx handler will not handle the event properly if the is_push flag is not set and it will crash. Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wu Fengguang authored
net/rxrpc/rxkad.c:1165:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: David Howells <dhowells@redhat.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sowmini Varadhan says: ==================== RDS: TCP: socket locking RDS packet assembly fixes This three part patchset fixes bugs in synchronization between rds_tcp_accept_one() and the rds-tcp send/recv path. Patch 1 ensures that the lock_sock() is taken appropriately and the RDS datagram reassembly state is reset to synchronize with the receive path. Patch 2 ensures that partially sent RDS datagrams will get retransmitted after rds_tcp_accept_one() switches sockets. Patch 3 fixes a race window which would prematurely re-enable rds_send_xmit() before the rds_tcp_connection setup has been completed in rds_tcp_accept_one(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
The send path needs to be quiesced before resetting callbacks from rds_tcp_accept_one(), and commit eb192840 ("RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sock") achieves this using the c_state and RDS_IN_XMIT bit following the pattern used by rds_conn_shutdown(). However this leaves the possibility of a race window as shown in the sequence below take t_conn_lock in rds_tcp_conn_connect send outgoing syn to peer drop t_conn_lock in rds_tcp_conn_connect incoming from peer triggers rds_tcp_accept_one, conn is marked CONNECTING wait for RDS_IN_XMIT to quiesce any rds_send_xmit threads call rds_tcp_reset_callbacks [.. race-window where incoming syn-ack can cause the conn to be marked UP from rds_tcp_state_change ..] lock_sock called from rds_tcp_reset_callbacks, and we set t_sock to null As soon as the conn is marked UP in the race-window above, rds_send_xmit() threads will proceed to rds_tcp_xmit and may encounter a null-pointer deref on the t_sock. Given that rds_tcp_state_change() is invoked in softirq context, whereas rds_tcp_reset_callbacks() is in workq context, and testing for RDS_IN_XMIT after lock_sock could result in a deadlock with tcp_sendmsg, this commit fixes the race by using a new c_state, RDS_TCP_RESETTING, which will prevent a transition to RDS_CONN_UP from rds_tcp_state_change(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
When we switch a connection's sockets in rds_tcp_rest_callbacks, any partially sent datagram must be retransmitted on the new socket so that the receiver can correctly reassmble the RDS datagram. Use rds_send_reset() which is designed for this purpose. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
When rds_tcp_accept_one() has to replace the existing tcp socket with a newer tcp socket (duelling-syn resolution), it must lock_sock() to suppress the rds_tcp_data_recv() path while callbacks are being changed. Also, existing RDS datagram reassembly state must be reset, so that the next datagram on the new socket does not have corrupted state. Similarly when resetting the newly accepted socket, appropriate locks and synchronization is needed. This commit ensures correct synchronization by invoking kernel_sock_shutdown to reset a newly accepted sock, and by taking appropriate lock_sock()s (for old and new sockets) when resetting existing callbacks. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
My prior attempt to fix the backlogs of parents failed. If we return NET_XMIT_CN, our parents wont increase their backlog, so our qdisc_tree_reduce_backlog() should take this into account. v2: Florian Westphal pointed out that we could drop the packet, so we need to save qdisc_pkt_len(skb) in a temp variable before calling fq_codel_drop() Fixes: 9d18562a ("fq_codel: add batch ability to fq_codel_drop()") Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Reported-by: Stas Nichiporovich <stasn77@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-