Merge tag 'usb-serial-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.1-rc7

Here are a couple of new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>

Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.
Signed-off-by: John D. Blair <johnb@candicontrols.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

Merge tag 'fixes-for-v4.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.1-rc5

A few late important fixes which have been pending
on mailing list due to my vacations.

The important fixes are a fix for DEPCMD and DGCMD
status bitfields on DWC3, a couple fixes for Renesas
USB Controller, one of which prevents a broken DT
binding from reaching v4.1-final, and an old fix for
s3c2410-udc where pullup logic was reversed.
Signed-off-by: Felipe Balbi <balbi@ti.com>

This patch fixes an issue that sometimes this controller is not able
to complete the Control write status stage.

This driver should enable DCPCTR.CCPL and PID_BUF to complete the status
stage. However, if this driver detects the ctrl_stage interruption first
before the control write data is received, this driver will clear the
PID_BUF wrongly in the usbhsf_pio_try_pop(). To avoid this issue, this
patch doesn't clear the PID_BUF in the usbhsf_pio_try_pop().
(Since also the privious code doesn't disable the PID_BUF after a control
 transfer was finished, this patch doesn't have any side efforts.)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This patch fixes an issue for control write. When usbhsf_prepare_pop()
is called after this driver called a gadget setup function, this controller
doesn't receive the control write data. So, this patch adds a code to clear
the fifo for control write in usbhsf_prepare_pop().
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

when copying to iter the size can be different then the iov count,
the check for full iov is wrong and make any read on request which
is not the exactly size of iov to return -EFAULT.

So, just check the success of the copy.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Currently we always assign one of the two common implementations of
ep_offset and ep_select operations, overwriting any platform-specific
implementations.

Fixes: d026e9c7 ("usb: musb: Change end point selection to use ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Not checking config_ep_by_speed could lead to a kernel
NULL pointer dereference error in usb_ep_enable

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Originally FFS_FL_CALL_CLOSED_CALLBACK flag has been used to
indicate if we should call ffs_closed_callback().

Commit 4b187fce ("usb: gadget: FunctionFS: add devices
management code") changed its semantic to indicate if we should
call ffs_closed() function which does a little bit more.

This situation leads to:

[  122.362269] ------------[ cut here ]------------
[  122.362287] WARNING: CPU: 2 PID: 2384 at drivers/usb/gadget/function/f_fs.c:3417 ffs_ep0_write+0x730/0x810 [usb_f_fs]()
[  122.362292] Modules linked in:
[  122.362555] CPU: 2 PID: 2384 Comm: adbd Tainted: G        W       4.1.0-0.rc4.git0.1.1.fc22.i686 #1
[  122.362561] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/25/2014
[  122.362567]  c0d1f947 415badfa 00000000 d1029e64 c0a86e54 00000000 d1029e94 c045b937
[  122.362584]  c0c37f94 00000002 00000950 f9b313d4 00000d59 f9b2ebf0 f9b2ebf0 fffffff0
[  122.362600]  00000003 deb53d00 d1029ea4 c045ba42 00000009 00000000 d1029f08 f9b2ebf0
[  122.362617] Call Trace:
[  122.362633]  [<c0a86e54>] dump_stack+0x41/0x52
[  122.362645]  [<c045b937>] warn_slowpath_common+0x87/0xc0
[  122.362658]  [<f9b2ebf0>] ? ffs_ep0_write+0x730/0x810 [usb_f_fs]
[  122.362668]  [<f9b2ebf0>] ? ffs_ep0_write+0x730/0x810 [usb_f_fs]
[  122.362678]  [<c045ba42>] warn_slowpath_null+0x22/0x30
[  122.362689]  [<f9b2ebf0>] ffs_ep0_write+0x730/0x810 [usb_f_fs]
[  122.362702]  [<f9b2e4c0>] ? ffs_ep0_read+0x380/0x380 [usb_f_fs]
[  122.362712]  [<c05a1c1f>] __vfs_write+0x2f/0x100
[  122.362722]  [<c05a42f2>] ? __sb_start_write+0x52/0x110
[  122.362731]  [<c05a2534>] vfs_write+0x94/0x1b0
[  122.362740]  [<c0a8a1c0>] ? mutex_lock+0x10/0x30
[  122.362749]  [<c05a2f41>] SyS_write+0x51/0xb0
[  122.362759]  [<c0a8c71f>] sysenter_do_call+0x12/0x12
[  122.362766] ---[ end trace 0673d3467cecf8db ]---

in some cases (reproduction path below). This commit get back
semantic of that flag and ensures that ffs_closed() is called
always when needed but ffs_closed_callback() is called only
if this flag is set.

Reproduction path:
Compile kernel without any UDC driver or bound some gadget
to existing one and then:

$ modprobe g_ffs
$ mount none -t functionfs mount_point
$ ffs-example mount_point

This will fail with -ENODEV as there is no udc.

$ ffs-example mount_point

This will fail with -EBUSY because ffs_data has not been
properly cleaned up.
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Returning non-zero value from ready callback makes ffs instance
return error from writing strings and enter FFS_CLOSING state.
This means that this this function is not truly ready and
close callback will not be called. This commit fix
ffs_ready_callback() to undo all side effects of this function
in case of error.
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

For some reason the code has always been disabling pullup
when asked to do the opposite. According to surrounding code
and gadget API this seems to be a mistake. This fix allows
UDC to be detected by host controller on recent kernels.
Signed-off-by: Sergiy Kibrik <sakib@meta.ua>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Fixed the incorrect macro definitions correctly as per databook.
Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Fixes: b09bb642 (usb: dwc3: gadget: implement Global Command support)
Cc: <stable@vger.kernel.org> #v3.5+
Signed-off-by: Felipe Balbi <balbi@ti.com>

Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Since the DT should describe the hardware (not the driver limitation),
This patch revises the binding document about the dma-names to change
simple numbering as "ch%d" instead of "tx<n>" and "rx<n>".

Also this patch fixes the actual code of renesas_usbhs driver to handle
the new dma-names.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Merge tag 'for-4.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus

Kishon writes:

phy: fixes for v4.1-rc

includes a fix in phy core w.r.t error checking, couple of fixes
in kconfig one which fixes randconfig error and the other
to fix dependency in QCOM PHY, driver fix in omap-usb2 in the
error path and a driver fix in rcar-gen2 to fix bit location.

Regression in commit 638139eb ("usb: hub: allow to process more usb
hub events in parallel")

The regression resulted in intermittent failure to initialise a 10-port
hub (with three internal VL812 4-port hub controllers) on boot, with a
failure rate of around 8%, due to multiple race conditions when
accessing addr_dev and slot_id in struct xhci_hcd.

This regression also exposed a problem with xhci_setup_device, which
"should be protected by the usb_address0_mutex" but no longer is due to

commit 6fecd4f2 ("USB: separate usb_address0 mutexes for each bus")

With separate buses (and locks) it is no longer the case that a single
lock will protect xhci_setup_device from accesses by two parallel
threads processing events on the two buses.

Fix this by adding a mutex to protect addr_dev and slot_id in struct
xhci_hcd, and by making the assignment of slot_id atomic.

Fixes multiple boot errors:

[ 0.583008] xhci_hcd 0000:00:14.0: Bad Slot ID 2
[ 0.583009] xhci_hcd 0000:00:14.0: Could not allocate xHCI USB device data structures
[ 0.583012] usb usb1-port3: couldn't allocate usb_device

And:

[ 0.637409] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.637417] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.637421] usb usb1-port1: couldn't allocate usb_device

And:

[ 0.753372] xhci_hcd 0000:00:14.0: ERROR: unexpected setup context command completion code 0x0.
[ 0.753373] usb 1-3: hub failed to enable device, error -22
[ 0.753400] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.753402] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.753403] usb usb1-port3: couldn't allocate usb_device

And:

[ 11.018386] usb 1-3: device descriptor read/all, error -110

And:

[ 5.753838] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command

Tested with 200 reboots, resulting in no USB hub init related errors.

Fixes: 638139eb ("usb: hub: allow to process more usb hub events in parallel")
Link: https://lkml.kernel.org/g/CAP-bSRb=A0iEYobdGCLpwynS7pkxpt_9ZnwyZTPVAoy0Y=Zo3Q@mail.gmail.comSigned-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: <stable@vger.kernel.org> # 3.18+
[changed git commit description style for checkpatch -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed regression. After commit 29e409f0 ("xhci: Allow xHCI drivers to
be built as separate modules") the module xhci_hcd became non-removable.
That behaviour is not expected and there're no notes about it in commit
message. The module should be removable as it blocks PM suspend/resume
functions (Debian Bug#666406).
Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

Two watchdog changes that came through different trees had a non
conflicting conflict, that is, one changed the semantics of a variable
but no actual code conflict happened. So the merge appeared fine, but
the resulting code did not behave as expected.

Commit 195daf66 ("watchdog: enable the new user interface of the
watchdog mechanism") changes the semantics of watchdog_user_enabled,
which thereafter is only used by the functions introduced by
b3738d29 ("watchdog: Add watchdog enable/disable all functions").

There further appears to be a distinct lack of serialization between
setting and using watchdog_enabled, so perhaps we should wrap the
{en,dis}able_all() things in watchdog_proc_mutex.

This patch fixes a s2r failure reported by Michal; which I cannot
readily explain. But this does make the code internally consistent
again.
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MTD fixes from Brian Norris:
 "Two MTD fixes for 4.1:

   - readtest: the signal-handling code was clobbering the error codes
     we should be handling/reporting in this test, rendering it useless.
     Noticed by Coverity.

   - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
     revised, so let's change that before 4.1 is minted"

* tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd:
  Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
  mtd: readtest: don't clobber error reports

Pull USB fixes from Greg KH:
 "Here are some USB fixes and new device ids for 4.1-rc4.

  All are pretty minor, and have been in linux-next successfully"

* tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
  Added another USB product ID for ELAN touchscreen quirks.
  xhci: gracefully handle xhci_irq dead device
  xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
  xhci: fix isoc endpoint dequeue from advancing too far on transaction error
  usb: chipidea: debug: avoid out of bound read
  USB: visor: Match I330 phone more precisely
  USB: pl2303: Remove support for Samsung I330
  USB: cp210x: add ID for KCF Technologies PRN device
  usb: gadget: remove incorrect __init/__exit annotations
  usb: phy: isp1301: work around tps65010 dependency
  usb: gadget: serial: fix re-ordering of tx data
  usb: gadget: hid: Fix static variable usage
  usb: gadget: configfs: Fix interfaces array NULL-termination
  usb: gadget: xilinx: fix devm_ioremap_resource() check
  usb: dwc3: dwc3-omap: correct the register macros

Pull tty/serial fixes from Greg KH:
 "Here's some TTY and serial driver fixes for reported issues.

  All of these have been in linux-next successfully"

* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pty: Fix input race when closing
  tty/n_gsm.c: fix a memory leak when gsmtty is removed
  Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
  serial: omap: Fix error handling in probe
  earlycon: Revert log warnings

Pull staging / IIO driver fixes from Greg KH:
 "Here's some staging and iio driver fixes to resolve a number of
  reported issues.

  All of these have been in linux-next for a while"

* tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits)
  iio: light: hid-sensor-prox: Fix memory leak in probe()
  iio: adc: cc10001: Add delay before setting START bit
  iio: adc: cc10001: Fix regulator_get_voltage() return value check
  iio: adc: cc10001: Fix incorrect use of power-up/power-down register
  staging: gdm724x: Correction of variable usage after applying ALIGN()
  iio: adc: cc10001: Fix the channel number mapping
  staging: vt6655: lock MACvWriteBSSIDAddress.
  staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value.
  staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC
  staging: vt6655: Fix 80211 control and management status reporting.
  staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED
  staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe
  staging: vt6656: use ieee80211_tx_info to select packet type.
  staging: rtl8712: freeing an ERR_PTR
  staging: sm750: remove incorrect __exit annotation
  iio: kfifo: Set update_needed to false only if a buffer was allocated
  iio: mcp320x: Fix occasional incorrect readings
  iio: accel: mma9553: check input value for activity period
  iio: accel: mma9553: add enable channel for activity
  iio: accel: mma9551_core: prevent buffer overrun
  ...

Pull char/misc fix from Greg KH:
 "Here is one fix, in the extcon subsystem, that resolves a reported
  issue.

  It's been in linux-next for a number of weeks now, sorry for not
  getting it to you sooner"

* tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  extcon: usb-gpio: register extcon device before IRQ registration

Pull UML hostfs fix from Richard Weinberger:
 "This contains a single fix for a regression introduced in 4.1-rc1"

* 'for-linus-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  hostfs: Use correct mask for file mode

Pull UBI bufix from Richard Weinberger:
 "This contains a single bug fix for the UBI block driver"

* tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs:
  UBI: block: Add missing cache flushes

Pull ext4 fixes from Ted Ts'o:
 "Fix a number of ext4 bugs; the most serious of which is a bug in the
  lazytime mount optimization code where we could end up updating the
  timestamps to the wrong inode"

* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix an ext3 collapse range regression in xfstests
  jbd2: fix r_count overflows leading to buffer overflow in journal recovery
  ext4: check for zero length extent explicitly
  ext4: fix NULL pointer dereference when journal restart fails
  ext4: remove unused function prototype from ext4.h
  ext4: don't save the error information if the block device is read-only
  ext4: fix lazytime optimization

Pull btrfs fixes from Chris Mason:
 "The first commit is a fix from Filipe for a very old extent buffer
  reuse race that triggered a BUG_ON.  It hasn't come up often, I looked
  through old logs at FB and we hit it a handful of times over the last
  year.

  The rest are other corners he hit during testing"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
  Btrfs: fix race between block group creation and their cache writeout
  Btrfs: fix panic when starting bg cache writeout after IO error
  Btrfs: fix crash after inode cache writeback failure

Pull MIPS fixes from Ralf Baechle:
 "Seven small fixes.  The shortlog below is a good description so no
  need to elaborate.

  It has sat in linux-next and survived the usual automated testing by
  Imagination's test farm"

* 'master' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: tlb-r4k: Fix PG_ELPA comment
  MIPS: Fix up obsolete cpu_set usage
  MIPS: IP32: Fix build errors in reset code in DS1685 platform hook.
  MIPS: KVM: Fix unused variable build warning
  MIPS: traps: remove extra Tainted: line from __show_regs() output
  MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1
  MIPS: Fix a preemption issue with thread's FPU defaults

Pull ARC fixes from Vineet Gupta.

* tag 'arc-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: inline cache flush toggle helpers
  ARC: With earlycon in use, retire EARLY_PRINTK
  ARC: unbork !LLSC build

Pull ARM SoC fixes from Arnd Bergmann:
 "Nothing frightening this time, just smaller fixes in a number of
  places.

  The other changes contained here are:

   MAINTAINERS file updates:

   - The mach-gemini maintainer is back in action and has a new git tree

   - Krzysztof Kozlowski has volunteered to be a new co-maintainer for
     the samsung platforms

   - updates to the files that belong to Marvell mvebu

  Bug fixes:

   - The largest changes are on omap2, but are only to avoid some
     harmless warnings and to fix reset on omap4

   - a small regression fix on tegra

   - multiple fixes for incorrect IRQ affinity on vexpress

   - the missing system controller on arm64 juno is added

   - one revert of a patch that was accidentally applied twice for
     mach-rockchip

   - two clock related DT fixes for mvebu

   - a workaround for suspend with old DT binaries on new exynos kernels

   - Another fix for suspend on exynos, needs to be backported"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  MAINTAINERS: Add dts entries for some of the Marvell SoCs
  MAINTAINERS: ARM: EXYNOS: Add Krzysztof Kozlowski as co-maintainer
  ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4
  ARM: EXYNOS: Fix failed second suspend on Exynos4
  Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs"
  ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider
  ARM: EXYNOS: Don't try to initialize suspend on old DT
  ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
  ARM: gemini: fix compiler warning due wrong data type
  ARM: vexpress/tc2: Add interrupt-affinity to the PMU node
  ARM: vexpress/ca9: Add interrupt-affinity to the PMU node
  ARM: vexpress/ca9: Add unified-cache property to l2 cache node
  ARM64: juno: add sp810 support and fix sp804 clock frequency
  ARM: Gemini: Maintainers update
  ARM: OMAP2+: Remove bogus struct clk comparison for timer clock
  ARM: dove: Add clock-names to CuBox Si5351 clk generator
  ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality
  ARM: OMAP4+: PRM: add support for passing status register/bit info to reset
  ARM: AM43xx: hwmod: add VPFE hwmod entries
  ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
  ...

Pull thermal fixes from Zhang Rui:
 "Specifics:

   - fix an issue in intel_powerclamp driver that idle injection target
     is not accurately maintained on newer Intel CPUs.  Package C8 to
     C10 states are introduced on these CPUs but they were not included
     in the package c-state residency calculation.  From Jacob Pan.

   - fix a problem that package c-state idle injection was missing on
     Broadwell server, by adding its id to intel_powerclamp driver.
     From Jacob Pan.

   - a couple of small fixes and cleanups from Joe Perches, Mathias
     Krause, Dan Carpenter and Anand Moon"

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  tools/thermal: tmon: fixed the 'make install' command
  thermal: rockchip: fix an error code
  thermal/powerclamp: fix missing newer package c-states
  thermal/intel_powerclamp: add id for broadwell server
  thermal/intel_powerclamp: add __init / __exit annotations
  thermal: Use bool function return values of true/false not 1/0

Merge tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new
  x86 test due to its hard dependency on 32-bit build environment.

  A set of 5 patches fix the make kselftest run and kselftest install"

* tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests, x86: Rework x86 target architecture detection
  selftests, x86: Remove useless run_tests rule
  selftests/x86: install tests
  selftest/x86: have no dependency on all when cross building
  selftest/x86: build both bitnesses

Pull parisc fixes from Helge Deller:
 "One important patch which fixes crashes due to stack randomization on
  architectures where the stack grows upwards (currently parisc and
  metag only).

  This bug went unnoticed on parisc since kernel 3.14 where the flexible
  mmap memory layout support was added by commit 9dabf60d.  The
  changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section
  and will not affect other platforms.

  The other two patches rename args of the kthread_arg() function and
  fixes a printk output"

* 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures
  parisc: copy_thread(): rename 'arg' argument to 'kthread_arg'
  parisc: %pf is only for function pointers

In commit 8ff16cf7 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding"), we added a generic "nor-jedec" binding to catch all
mostly-compatible SPI NOR flash which can be detected via the READ ID
opcode (0x9F). This was discussed and reviewed at the time, however
objections have come up since then as part of this discussion:

  http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074

It seems the parties involved agree that "jedec,spi-nor" does a better
job of capturing the fact that this is SPI-specific, not just any NOR
flash.

This binding was only merged for v4.1-rc1, so it's still OK to change
the naming.

At the same time, let's move the documentation to a better name.

Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the
documentation.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>

The ELPA bit in PageGrain is all about large *physical* addresses, so
correct the reference to "large virtual address" in the comment above
where it is set for MIPS64.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10038/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

cpu_set was removed (along with a bunch of cpumask helpers) by
commit 2f0f267e ("cpumask: remove deprecated functions.").

Fix this by replacing cpu_set with cpumask_set_cpu. Without this
fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y.

  arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup':
  arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration]

Fixes: 90db024f ("MIPS: smp-cps: cpu_set FPU mask if FPU present")
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Acked-by: Niklas Cassel <niklass@axis.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9912/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull x86 build fix from Ingo Molnar:
 "A bzImage build fix on older distros"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Fix 'make bzImage' on older distros