- 16 Jun, 2011 14 commits
-
-
Jozsef Kadlecsik authored
Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
Jozsef Kadlecsik authored
With the change the sets can use any parameter available for the match and target extensions, like input/output interface. It's required for the hash:net,iface set type. Signed-off-by:
-
Jozsef Kadlecsik authored
Signed-off-by:
-
Jozsef Kadlecsik authored
When creating a set from a range expressed as a network like 10.1.1.172/29, the from address was taken as the IP address part and not masked with the netmask from the cidr. Signed-off-by:
-
Jozsef Kadlecsik authored
The patch "Fix adding ranges to hash types" had got a mistypeing in the timeout variant of the hash types, which actually made the patch ineffective. Fixed! Signed-off-by:
-
Jozsef Kadlecsik authored
The range internally is converted to the network(s) equal to the range. Example: # ipset new test hash:net # ipset add test 10.2.0.0-10.2.1.12 # ipset list test Name: test Type: hash:net Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16888 References: 0 Members: 10.2.1.12 10.2.1.0/29 10.2.0.0/24 10.2.1.8/30 Signed-off-by:
-
Jozsef Kadlecsik authored
A set type may have multiple revisions, for example when syntax is extended. Support continuous revision ranges in set types. Signed-off-by:
-
Jozsef Kadlecsik authored
When ranges are added to hash types, the elements may trigger rehashing the set. However, the last successfully added element was not kept track so the adding started again with the first element after the rehashing. Bug reported by Mr Dash Four. Signed-off-by:
-
Jozsef Kadlecsik authored
Current listing makes possible to list sets with full content only. The patch adds support partial listings, i.e. listing just the existing setnames or listing set headers, without set members. Signed-off-by:
-
Jozsef Kadlecsik authored
The support makes possible to specify the timeout value for the SET target and a flag to reset the timeout for already existing entries. Signed-off-by:
-
Jozsef Kadlecsik authored
Signed-off-by:
-
Jozsef Kadlecsik authored
When an element to a set with timeout added, one can change the timeout by "readding" the element with the "-exist" flag. That means the timeout value is reset to the specified one (or to the default from the set specification if the "timeout n" option is not used). Example ipset add foo 1.2.3.4 timeout 10 ipset add foo 1.2.3.4 timeout 600 -exist Signed-off-by:
-
-
Patrick McHardy authored
-
- 15 Jun, 2011 26 commits
-
-
Matt Carlson authored
The power source switching code is about to get a little more complex. This patch seeks to simplify future power source switching patches by clarifying the existing code. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Reviewed-by:
Benjamin Li <benli@broadcom.com> Signed-off-by:
David S. Miller <davem@conan.davemloft.net>
-
Matt Carlson authored
This patch changes to code to use some of the preprocessor definitions from mii.h over its homegrown equivalents. Signed-off-by:
-
Matt Carlson authored
This patch adds code to present the flow control advertisements through the ethtool get_settings callback. Signed-off-by:
-
Matt Carlson authored
This patch fixes the EEE debounce timer values. Signed-off-by:
-
Matt Carlson authored
This patch adds more selfboot formats to the NVRAM selftest. It also changes the code to return an error on an unsupported NVRAM format. Signed-off-by:
-
Matt Carlson authored
Now that all chips have this bug, the flag checks become useless code. This patch removes the flag. Signed-off-by:
-
Matt Carlson authored
This patch removes the 40BIT_DMA_LIMIT_BUG flag. There already exists a flag for this purpose (TG3_FLAG_40BIT_DMA_BUG) and was already being used in the correct spot. Signed-off-by:
-
Matt Carlson authored
On rare occasions, writing the tag to the interrupt mailbox does not reenable interrupts. This patch fixes the problem by reissuing the mailbox update. Signed-off-by:
-
Vladislav Zolotarov authored
Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Dmitry Kravkov authored
Add supoprt for 3 COSes for 578xx devices. Fix HW configuration for PFC feature according to new HSI in link layer. Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Vladislav Zolotarov authored
- Added support for a parity error handling for a 57712 chip. - Changed the parity recovery scheme from per-chip to per-engine. Signed-off-by:
-
Vlad Zolotarov authored
New FW/HSI (7.0): - Added support to 578xx chips - Improved HSI - much less driver's direct access to the FW internal memory needed. New implementation of the HSI handling layer in the bnx2x (bnx2x_sp.c): - Introduced chip dependent objects that have chip independent interfaces for configuration of MACs, multicast addresses, Rx mode, indirection table, fast path queues and function initialization/cleanup. - Objects functionality is based on the private function pointers, which allows not only a per-chip but also PF/VF differentiation while still preserving the same interface towards the driver. - Objects interface is not influenced by the HSI changes which do not require providing new parameters keeping the code outside the bnx2x_sp.c invariant with regard to such HSI chnages. Changes in a CNIC, bnx2fc and bnx2i modules due to the new HSI. Signed-off-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by:
-
Vladislav Zolotarov authored
Moved the HSI dependent slow path code to a separate file. Currently it contains the implementation of MACs, Rx mode, multicast addresses, indirection table, fast path queue and function configuration code. Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Dmitry Kravkov authored
Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
