- 16 May, 2018 5 commits
-
-
Darrick J. Wong authored
Since the transaction allocation helper is about to become more complex, move it to common.c and remove the redundant parameters. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Strengthen the btree block header checks to detect the number of records being less than the btree type's minimum record count. Certain blocks are allowed to violate this constraint -- specifically any btree block at the top of the tree can have fewer than minrecs records. Signed-off-by:
-
Darrick J. Wong authored
All scrub code runs in transaction context, which means that memory allocations are automatically run in PF_MEMALLOC_NOFS context. It's therefore unnecessary to pass in KM_NOFS to allocation routines, so clean them all out. Signed-off-by:
-
Darrick J. Wong authored
Refactor the quota scrubber to take the quotaofflock and grab the quota inode in the setup function so that we can treat quota in the same "scrub in the context of this inode" (i.e. sc->ip) manner as we treat any other inode. We do have to drop the quota inode's ILOCK_EXCL to use dqiterate, but since dquots have their own individual locks the ILOCK wasn't helping us anyway. Signed-off-by:
-
Darrick J. Wong authored
Create a helper function to iterate all the dquots of a given type in the system, and refactor the dquot scrub to use it. This will get more use in the quota repair code. Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
- 10 May, 2018 26 commits
-
-
Darrick J. Wong authored
The function 'xfs_qm_dqiterate' doesn't iterate dquots at all, it iterates all dquot blocks of a quota inode and clears the counters. Therefore, change the name to something more descriptive so that we can introduce a real dquot iterator later. Signed-off-by:
-
Darrick J. Wong authored
DQALLOC is only ever used with xfs_qm_dqget*, and the only flag that the _dqget family of functions cares about is DQALLOC. Therefore, change it to a boolean 'can alloc?' flag for the dqget interfaces where that makes sense. Signed-off-by:
-
Darrick J. Wong authored
The quota initialization code needs an "uncached" variant of _dqget to read in default quota limits and timers before the dquot cache is fully set up. We've already split up _dqget into its component pieces so create a fourth variant to address this need, and make dqread internal to xfs_dquot.c again. Signed-off-by:
-
Darrick J. Wong authored
Separate the disk dquot read and allocation functionality into two helper functions, then refactor dqread to call them directly. Signed-off-by:
-
Darrick J. Wong authored
Create two incore dquot initialization functions that will help us to disentangle dqget and dqread. Signed-off-by:
-
Darrick J. Wong authored
Quotacheck only runs during mount, which means that there are no other processes in the system that could be doing chown or chproj. Therefore there's no potential for racing to attach dquots to the inode so we can drop all the ILOCK and race detection bits from quotacheck. Signed-off-by:
-
Darrick J. Wong authored
There are two uses of dqget here -- one is to return the dquot for a given type and id, and the other is to return the dquot for a given type and inode. Those are two separate things, so split them into two smaller functions. Signed-off-by:
-
Darrick J. Wong authored
The flags argument is always zero, get rid of it. Signed-off-by:
-
Darrick J. Wong authored
Move the dqget input checks to a separate function in preparation for splitting up the dqget functionality. Signed-off-by:
-
Darrick J. Wong authored
Delegate the dquot cache handling (radix tree lookup and insertion) to separate helper functions so that we can continue to simplify the body of dqget. Signed-off-by:
-
Darrick J. Wong authored
There's only one caller of DQNEXT and its semantics can be moved into a separate function, so create the function and get rid of the flag. Signed-off-by:
-
Darrick J. Wong authored
When dquot flush or purge fail there's no need to spam the logs, we've already logged the IO error or fs shutdown that caused the flush failures. Signed-off-by:
-
Darrick J. Wong authored
In commit efa092f3 "[XFS] Fixes a bug in the quota code when allocating a new dquot record", we allocate a new dquot block, grab a buffer to initialize it, and return the locked initialized dquot buffer to the caller for further in-core dquot initialization. Unfortunately, if the _bmap_finish errored out, _qm_dqalloc would also error out without bothering to free the (locked) buffer. Leaking a locked buffer caused hangs in generic/388 when quotas are enabled. Furthermore, the _bmap_finish -> _defer_finish conversion in 310a75a3 ("xfs: change xfs_bmap_{finish,cancel,init,free} -> xfs_defer_*") failed to observe that the buffer was held going into _defer_finish and therefore failed to notice that the buffer lock is /not/ maintained afterwards. Now that we can bjoin a buffer to a defer_ops, use this mechanism to ensure that the buffer stays locked across the _defer_finish. Release the holds and locks on the buffer as appropriate if we have to error out. There is a subtlety here for the caller in that the buffer emerges locked and held to the transaction, so if the _trans_commit fails we have to release the buffer explicitly. This fixes the unmount hang in generic/388 when quotas are enabled. Signed-off-by:
-
Brian Foster authored
Unwritten extents by definition have not been written to until they are converted to normal written extents. If unwritten extents are freed from a file, it is therefore guaranteed that the blocks have not been written to since allocation (note that zero range punches and reallocates blocks). To cut down on online discards generated from workloads that make use of preallocation, skip discards of extents if they are in the unwritten state when the extent is freed. Note that this optimization does not apply to log recovery, during which all freed extents are discarded if online discard is enabled. Also note that it may be possible for a filesystem crash to occur after write completion of an unwritten extent but before unwritten conversion such that the extent remains unwritten after log recovery. Since this pseudo-inconsistency may already be possible after a crash (consider writing to recently allocated blocks where the allocation transaction is lost after a crash), this change shouldn't introduce any fundamental limitations that don't already exist. In short, on storage stacks where discards are important, it's good practice to run an occasional fstrim even with online discard enabled in the filesystem, particularly after a crash. Signed-off-by:
-
Brian Foster authored
We've had reports of online discard operations being sent from XFS on write-only workloads. These discards occur as a result of eofblocks trims that can occur after a large file copy completes. These discards are slightly confusing for users who might be paying close attention to online discards (i.e., vdo) due to performance sensitivity. They also happen to be spurious because freed post-eof blocks by definition have not been written to during the current allocation cycle. Update xfs_free_eofblocks() to skip discards that are purely attributed to eofblocks trims. This cuts down the number of spurious discards that may occur on write-only workloads due to normal preallocation activity. Note that discards of post-eof extents can still occur from other codepaths that do not isolate handling of post-eof blocks from those within eof. For example, file unlinks and truncates may still cause discards for any file blocks affected by the operation. Signed-off-by:
-
Brian Foster authored
Freed extents are unconditionally discarded when online discard is enabled. Define XFS_BMAPI_NODISCARD to allow callers to bypass discards when unnecessary. For example, this will be useful for eofblocks trimming. This patch does not change behavior. Signed-off-by:
-
Dave Chinner authored
It's just a connector between a transaction and a log item. There's a 1:1 relationship between a log item descriptor and a log item, and a 1:1 relationship between a log item descriptor and a transaction. Both relationships are created and terminated at the same time, so why do we even have the descriptor? Replace it with a specific list_head in the log item and a new log item dirtied flag to replace the XFS_LID_DIRTY flag. Signed-Off-By:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Dave Chinner authored
Just to make sure the item isn't associated with another transaction when we try to reuse it. Signed-Off-By:
-
Dave Chinner authored
xfs_reflink_clear_inode_flag double-joins an inode to a transaction, which is not allowed. Fix that and document that the caller must have already joined it. Signed-Off-By:
-
Dave Chinner authored
xfs_reflink_cancel_cow_range joins an inode twice to the same transaction. This is not allowed, so fix it and document that the callers of xfs_reflink_cancel_cow_blocks() must have already joined the inode to the permanent transaction passed in. Signed-Off-By:
-
Dave Chinner authored
xfs_inactive_symlink_rmt() does something nasty - it joins an inode into a transaction it is already joined to. This means the inode can have multiple log item descriptors attached to the transaction for it. This breaks teh 1:1 mapping that is supposed to exist between the log item and log item descriptor. This results in the log item being processed twice during transaction commit and CIL formatting, and there are lots of other potential issues tha arise from double processing of log items in the transaction commit state machine. In this case, the inode is already held by the rolling transaction returned from xfs_defer_finish(), so there's no need to join it again. Signed-Off-By:
-
Dave Chinner authored
Been hitting AIL ordering assert failures recently, but been unable to trace them down because the system immediately hangs up onteh spinlock that was held when this assert fires: XFS: Assertion failed: XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0, file: fs/xfs/xfs_trans_ail.c, line: 52 Move the assertions outside of the spinlock so the corpse can be dissected. Thanks to Brian Foster for supplying a clean way of doing this. Signed-Off-By:
-
Dave Chinner authored
So it's clear in the trace where they are being called from. Signed-Off-By:
-
Dave Chinner authored
Because currently we have no idea what the transaction context we are operating in is, and I need to know that information to track down bugs in multiple log item joins to transactions. Signed-Off-By:
-
Dave Chinner authored
The log item flags contain a field that is protected by the AIL lock - the XFS_LI_IN_AIL flag. We use non-atomic RMW operations to set and clear these flags, but most of the updates and checks are not done with the AIL lock held and so are susceptible to update races. Fix this by changing the log item flags to use atomic bitops rather than be reliant on the AIL lock for update serialisation. Signed-Off-By:
-
Darrick J. Wong authored
xfs_rmap_lookup_le_range can return errors, so we need to check for them and bail out. Signed-off-by:
-
- 09 May, 2018 9 commits
-
-
Darrick J. Wong authored
Don't panic() the system if the bmap records are garbage, just call ASSERT which gives us the same backtrace but enables developers to control if the system goes down or not. This makes debugging with generic/388 much easier because it won't reboot the machine midway through a run just because btree_read_bufl returns EIO when the fs has already shut down. Signed-off-by:
-
Brian Foster authored
Directory operations can perform block allocations as entries are added/removed from directories. Defer AGFL block frees from the remaining directory operation transactions. This covers the hard link, remove and rename operations. Signed-off-by:
-
Brian Foster authored
Inode allocation can require block allocation for physical inode chunk allocation, inode btree record insertion, and/or directory block allocation for entry insertion. Any of these block allocation requests can require AGFL fixups prior to the actual allocation. Update the common file creation transacions to defer AGFL frees from these contexts to avoid too much log reservation consumption per-transaction. Since these transactions are already passed down through the btree cursors and da_args structure, this simply requires to attach dfops to the transaction. Note that this covers tr_create, tr_mkdir and tr_symlink. Other transactions such as tr_create_tmpfile do not already make use of deferred operations and so are left alone for the time being. Signed-off-by:
-
Brian Foster authored
XFS inode chunks are already freed via deferred operations (which now also defer AGFL block frees), but inode btree blocks are freed directly in the associated context. This has been known to lead to log reservation overruns in particular workloads where an inobt block free may require several AGFL block frees (and thus several allocation btree modifications) before the inobt block itself is actually freed. To avoid this problem, defer the frees of any AGFL blocks before the inobt block free takes place. This requires passing the dfops from xfs_inactive_ifree() down through the inobt ->[alloc|free]_block() callouts, which essentially only requires to attach the dfops to the transaction since it is already carried all the way through to the inobt update and allocation. Signed-off-by:
-
Brian Foster authored
Now that AGFL block frees are deferred when dfops is set in the transaction, start deferring AGFL block frees from contexts that are known to push the limits of existing log reservations. The first such context is deferred operation processing itself. This primarily targets deferred extent frees (such as file extents and inode chunks), but in doing so covers all allocation operations that occur in deferred operation processing context. Update xfs_defer_finish() to set and reset ->t_agfl_dfops across the processing sequence. This means that any AGFL block frees due to allocation events result in the addition of new EFIs to the dfops rather than being processed immediately. xfs_defer_finish() rolls the transaction at least once more to process the frees of the AGFL blocks back to the allocation btrees and returns once the AGFL is rectified. Signed-off-by:
-
Brian Foster authored
The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by:
-
Brian Foster authored
Refactor the AGFL block free code into a new helper such that it can be invoked from deferred context. No functional changes. Signed-off-by:
-
Eric Sandeen authored
Rather than printing the top of the buffer that held a corrupted dqblk, restructure things to print out the specific one that failed by pushing the calls to the verifier_error function down into the verifier which iterates over the buffer and detects the error. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Eric Sandeen authored
Add an xfs_dqblk verifier so that it can check the uuid on V5 filesystems; it calls the existing xfs_dquot_verify verifier to validate the xfs_disk_dquot_t contained inside it. This lets us move the uuid verification out of the crc verifier, which makes little sense. Signed-off-by:
-
