- 07 Jun, 2017 30 commits
-
-
Dan Carpenter authored
The isp->inputs[] array has isp->input_cnt elements which have been initialized so this > should be >=. This bug is harmless. The check against ATOM_ISP_MAX_INPUTS prevents us from reading beyond the end of the array. The uninitialized elements are zeroed out so we will end up returning -EINVAL a few lines later because the .camera pointer is NULL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Alan Cox authored
The two drivers were machine merged and in this case the machine output was to say the least not optimal. Signed-off-by:
-
Alan Cox authored
HRT_UNSCHED is never defined or set in the driver, so this is dead code that can be retired, simplifying the code a bit further. Signed-off-by:
-
Alan Cox authored
With the removal of the HAS_BL bootloader code the value of NUM_OF_BLS is an invariant zero. So let's get rid of it. Signed-off-by:
-
Alan Cox authored
Kill off the HAS_BL define and the code and includes it brackets. We never define HAS_BL or use that functionality. Signed-off-by:
-
Juan Antonio Pedreira Martos authored
Fix a couple of sparse warnings: drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:59:14: warning: symbol 'repool_pgnr' was not declared. Should it be static? drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:387:6: warning: symbol 'punit_ddr_dvfs_enable' was not declared. Should it be static? Mark these symbols as static, so they are no longer incorrectly exported. Signed-off-by:
Juan Antonio Pedreira Martos <juanpm1@gmail.com> Signed-off-by:
-
Paolo Cretaro authored
Fix warning issued by sparse: Using plain integer as NULL pointer Signed-off-by:
Paolo Cretaro <melko@frugalware.org> Signed-off-by:
-
Christoph Fanelsa authored
Fix checkpatch warnings of prefered using '%s..", __func__' as function name in a string Signed-off-by:
Christoph Fanelsa <eddi1983@gmx.net> Signed-off-by:
-
Hirokazu Honda authored
A driver error message is shown without DEBUG definition to find an error and debug easily. Signed-off-by:
Hirokazu Honda <hiroh@chromium.org> Signed-off-by:
-
Daniel Kurtz authored
If the mdp_* nodes are under an mdp sub-node, their corresponding platform device does not automatically get its iommu assigned properly. Fix this by moving the mdp component nodes up a level such that they are siblings of mdp and all other SoC subsystems. This also simplifies the device tree. Although it fixes iommu assignment issue, it also break compatibility with old device tree. So, the patch in driver is needed to iterate over sibling mdp device nodes, not child ones, to keep driver work properly. Signed-off-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Minghsiu Tsai <minghsiu.tsai@mediatek.com> Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Minghsiu Tsai authored
If the mdp_* nodes are under an mdp sub-node, their corresponding platform device does not automatically get its iommu assigned properly. Fix this by moving the mdp component nodes up a level such that they are siblings of mdp and all other SoC subsystems. This also simplifies the device tree. Although it fixes iommu assignment issue, it also break compatibility with old device tree. So, the patch in driver is needed to iterate over sibling mdp device nodes, not child ones, to keep driver work properly. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Philipp Zabel authored
That way we don't have to rely on userspace to inject the headers on IDR requests, and there is always enough information to start decoding at an I-frame. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Implement the V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME control to force IDR frames. This is useful to implement VFU (Video Fast Update) on RTP transmissions. We already force an IDR frame at the beginning of each GOP to work around a firmware bug on i.MX27, use the same mechanism to service IDR requests from userspace. Signed-off-by:
-
Jia-Ju Bai authored
The driver may sleep under a spin lock, and the function call path is: snd_cx18_pcm_hw_free (acquire the lock by spin_lock_irqsave) vfree --> may sleep To fix it, the "substream->runtime->dma_area" is passed to a temporary value, and mark it NULL when holding the lock. The memory is freed by vfree through the temporary value outside the lock holding. Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> [hans.verkuil@cisco.com: removed unnecessary 'if (dma_area)'] Signed-off-by:
-
Jia-Ju Bai authored
The driver may sleep under a spin lock, and the function call path is: snd_ivtv_pcm_hw_free (acquire the lock by spin_lock_irqsave) vfree --> may sleep To fix it, the "substream->runtime->dma_area" is passed to a temporary value, and mark it NULL when holding the lock. The memory is freed by vfree through the temporary value outside the lock holding. Signed-off-by:
-
Kevin Hilman authored
The current driver has a handful of hard-coded assumptions based on its primary use for capture of video signals. Cleanup those assumptions, and also query the subdev for format information and use that if available. Tested with 10-bit raw bayer input (SGRBG10) using the aptina,mt9v032 sensor, and also tested that composite video input still works from ti,tvp514x decoder. Both tests done on the da850-evm board with the add-on UI board. NOTE: Will need further testing for other sensors with different bus formats. Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Kevin Hilman authored
Enable getting of subdevs from DT ports and endpoints. The _get_pdata() function was larely inspired by (i.e. stolen from) am437x-vpfe.c Signed-off-by:
-
Kevin Hilman authored
Capture driver silently overrides pixel format with a hack (according to the comments) to pass v4l2 compliance tests. This isn't needed for normal functionality, and works for composite video and raw camera capture without. In addition, the hack assumes that it only supports raw capture with a single format (SBGGR8) which isn't true. VPIF can also capture 10- and 12-bit raw formats as well. Forthcoming patches will enable VPIF input with raw-camera support and has been tested with 10-bit format from the aptina,mt9v032 sensor. Any compliance failures should be fixed with a real fix. Signed-off-by:
-
Anton Blanchard authored
The ir-spi driver has 2 issues which prevents it from working with lirc: 1. The ir-spi driver uses 16 bits of SPI data to create one cycle of the waveform. As such our SPI clock needs to be 16x faster than the carrier frequency. The driver is inconsistent in how it currently handles this. It initializes it to the carrier frequency: But the commit message has some example code which initialises it to 16x the carrier frequency: val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); To maintain compatibility with lirc, always do the frequency adjustment in the driver. 2. lirc presents pulses in microseconds, but the ir-spi driver treats them as cycles of the carrier. Similar to other lirc drivers, do the conversion with DIV_ROUND_CLOSEST(). Fixes: fe052da4 ("[media] rc: add support for IR LEDs driven through SPI") Cc: stable@vger.kernel.org Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Johan Hovold authored
Drop a since commit e1159cb3 ("[media] mceusb: remove pointless mce_flush_rx_buffer function") redundant reinitialisation of two urb fields immediately after they have been initialised. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
Fix urb and transfer-buffer leaks in an urb-submission error path which may be hit when a device is disconnected. Fixes: 66e89522 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable <stable@vger.kernel.org> # 2.6.36 Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Dave Stevenson authored
interrupts is listed as an optional property in the DT binding, but in reality the driver didn't work without it. The existing driver relied on having the interrupt line connected to the SoC to trigger handling various events. Add the option to poll the interrupt status register via a timer if no interrupt source is defined. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
-
Dave Stevenson authored
Previously the mbus_fmt_code was set after the device was registered. If a connected sub-device called tc358743_get_fmt prior to that point it would get an invalid code back. Signed-off-by:
-
Dave Stevenson authored
There was no way to query the supported mbus formats from this driver. enum_mbus_code is the function to expose that, so implement it. Signed-off-by:
-
Hans Verkuil authored
- use __func__ instead of writing the full function name - drop debug message in cec_config_log_addr since the same information will be reported later - use debug level 1 for errors and infrequent events, use level 2 for debugging CEC message traffic - log when a transmit is retried, very useful to know when debugging - debug messages now all start with lower case Signed-off-by:
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Sakari Ailus authored
The mutex that was initialised in v4l2_ctrl_handler_init_class() was not destroyed in v4l2_ctrl_handler_free(). Do that. Additionally, explicitly refer to the ctrl handler's mutex in mutex initialisation for clarity. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Sometimes the caller is already holding the control handler mutex and using it to serialise something. Provide an unlocked variant of the same function to be used in those cases. Signed-off-by:
-
Hugues Fruchet authored
Ensure that ISI is clocked before starting sensor sub device. Remove un-needed type check in try_fmt(). Use clamp() macro for hardware capabilities. Fix wrong tabulation to space. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
media fixes for v4.12-rc4 * tag 'media/v4.12-2': (598 commits) [media] rc-core: race condition during ir_raw_event_register() [media] cec: drop MEDIA_CEC_DEBUG [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER [media] cec: select CEC_CORE instead of depend on it [media] rainshadow-cec: ensure exit_loop is intialized [media] atomisp: don't treat warnings as errors Linux 4.12-rc3 x86/ftrace: Make sure that ftrace trampolines are not RWX x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range() selftests/ftrace: Add a testcase for many kprobe events kprobes/x86: Fix to set RWX bits correctly before releasing trampoline ftrace: Fix memory leak in ftrace_graph_release() ipv4: add reference counting to metrics net: ethernet: ax88796: don't call free_irq without request_irq first ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets sctp: fix ICMP processing if skb is non-linear net: llc: add lock_sock in llc_ui_bind to avoid a race condition PCI/msi: fix the pci_alloc_irq_vectors_affinity stub blk-mq: Only register debugfs attributes for blk-mq queues x86/timers: Move simple_udelay_calibration past init_hypervisor_platform ... Signed-off-by:
-
- 06 Jun, 2017 10 commits
-
-
Steven Toth authored
Avoid a double fetch by reusing the values from the prior transfer. Originally reported via https://bugzilla.kernel.org/show_bug.cgi?id=195559 Thanks to Pengfei Wang <wpengfeinudt@gmail.com> for reporting. Signed-off-by:
Steven Toth <stoth@kernellabs.com> Reported-by:
Pengfei Wang <wpengfeinudt@gmail.com> Signed-off-by:
-
Pavel Machek authored
V4L2_CID_EXPOSURE_BIAS does not exist, fix documentation. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
-
Nori, Sekhar authored
For both BT.656 and BT.1120 video, the pixel format used by VPIF is Y/CbCr 4:2:2 in semi-planar format (Luma in one plane and Chroma in another). This corresponds to NV16 pixel format. This is documented in section 36.2.3 of OMAP-L138 Technical Reference Manual, SPRUH77A. The VPIF driver incorrectly sets the default format to V4L2_PIX_FMT_YUV422P. Fix it. Reported-by:
Alejandro Hernandez <ajhernandez@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Acked-by:
-
Philipp Zabel authored
The hardware codec is not colorspace aware. We should trust userspace to set the correct colorimetry information on the OUTPUT queue and mirror the exact same setting on the CAPTURE queue. There is no reason to restrict colorspace to JPEG or REC709 only. Also, set the default colorspace, as returned by calling VIDIOC_TRY/S_FMT with V4L2_COLORSPACE_DEFAULT, initially. Signed-off-by:
-
Ulrich Hecht authored
Used to differentiate between models with 3 and 6 inputs. Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by:
-
Ulrich Hecht authored
To differentiate between two classes of chip packages that have different numbers of input ports. Signed-off-by:
-
Niklas Söderlund authored
If the requested pixelformat is not supported fallback to the default format, do not revert the entire format. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Niklas Söderlund authored
The return value of __rvin_try_format_source is not checked, add a check and propagate the error. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
There is only one subdevice registered with the async framework so there is no need for the driver to check which subdevice is bound or unbound. Remove these checks since the async framework preforms this. Signed-off-by:
-
Niklas Söderlund authored
With the driver stopping and starting the stream each time the driver is stalled rvin_capture_off() can be folded in to the only caller. Signed-off-by:
-
