Charles Shirron and Paul Cassella from Cray Inc have reported kswapd
stuck in a busy loop with nothing left to balance, but
kswapd_try_to_sleep() failing to sleep.  Their analysis found the cause
to be a combination of several factors:

1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait

2. The process has been killed (by OOM in this case), but has not yet been
   scheduled to remove itself from the waitqueue and die.

3. kswapd checks for throttled processes in prepare_kswapd_sleep():

        if (waitqueue_active(&pgdat->pfmemalloc_wait)) {
                wake_up(&pgdat->pfmemalloc_wait);
		return false; // kswapd will not go to sleep
	}

   However, for a process that was already killed, wake_up() does not remove
   the process from the waitqueue, since try_to_wake_up() checks its state
   first and returns false when the process is no longer waiting.

4. kswapd is running on the same CPU as the only CPU that the process is
   allowed to run on (through cpus_allowed, or possibly single-cpu system).

5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd
   encounters no voluntary preemption points and repeatedly fails
   prepare_kswapd_sleep(), blocking the process from running and removing
   itself from the waitqueue, which would let kswapd sleep.

So, the source of the problem is that we prevent kswapd from going to
sleep until there are processes waiting on the pfmemalloc_wait queue,
and a process waiting on a queue is guaranteed to be removed from the
queue only when it gets scheduled.  This was done to make sure that no
process is left sleeping on pfmemalloc_wait when kswapd itself goes to
sleep.

However, it isn't necessary to postpone kswapd sleep until the
pfmemalloc_wait queue actually empties.  To prevent processes from being
left sleeping, it's actually enough to guarantee that all processes
waiting on pfmemalloc_wait queue have been woken up by the time we put
kswapd to sleep.

This patch therefore fixes this issue by substituting 'wake_up' with
'wake_up_all' and removing 'return false' in the code snippet from
prepare_kswapd_sleep() above.  Note that if any process puts itself in
the queue after this waitqueue_active() check, or after the wake up
itself, it means that the process will also wake up kswapd - and since
we are under prepare_to_wait(), the wake up won't be missed.  Also we
update the comment prepare_kswapd_sleep() to hopefully more clearly
describe the races it is preventing.

Fixes: 5515061d ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>	[3.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We are supposed to take one css reference per each memory page and per
each swap entry accounted to a memory cgroup.  However, during task
charges migration we take a reference to the destination cgroup twice
per each swap entry: first in mem_cgroup_do_precharge()->try_charge()
and then in mem_cgroup_move_swap_account(), permanently leaking the
destination cgroup.

The hunk taking the second reference seems to be a leftover from the
pre-00501b53 ("mm: memcontrol: rewrite charge API") era.  Remove it
to fix the leak.

Fixes: e8ea14cc (mm: memcontrol: take a css reference for each charged page)
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3e32cb2e ("mm: memcontrol: lockless page counters")
accidentally switched the soft limit default from infinity to zero,
which turns all memcgs with even a single page into soft limit excessors
and engages soft limit reclaim on all of them during global memory
pressure.  This makes global reclaim generally more aggressive, but also
inverts the meaning of existing soft limit configurations where unset
soft limits are usually more generous than set ones.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

These are obsolete since commit e30825f1 ("mm/debug-pagealloc:
prepare boottime configurable") was merged.  So remove them.

[pebolle@tiscali.nl: find obsolete Kconfig options]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix clashing values for O_PATH and FMODE_NONOTIFY on sparc.  The
clashing O_PATH value was added in commit 5229645b ("vfs: add
nonconflicting values for O_PATH") but this can't be changed as it is
user-visible.

FMODE_NONOTIFY is only used internally in the kernel, but it is in the
same numbering space as the other O_* flags, as indicated by the comment
at the top of include/uapi/asm-generic/fcntl.h (and its use in
fs/notify/fanotify/fanotify_user.c).  So renumber it to avoid the clash.

All of this has happened before (commit 12ed2e36: "fanotify:
FMODE_NONOTIFY and __O_SYNC in sparc conflict"), and all of this will
happen again -- so update the uniqueness check in fcntl_init() to
include __FMODE_NONOTIFY.
Signed-off-by: David Drysdale <drysdale@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

build error

  arch/blackfin/mach-bf533/boards/stamp.c:834:2: error: implicit declaration of function 'mdelay'
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In ocfs2_link(), the parent directory inode passed to function
ocfs2_lookup_ino_from_name() is wrong.  Parameter dir is the parent of
new_dentry not old_dentry.  We should get old_dir from old_dentry and
lookup old_dentry in old_dir in case another node remove the old dentry.

With this change, hard linking works again, when paths are relative with
at least one subdirectory.  This is how the problem was reproducable:

  # mkdir a
  # mkdir b
  # touch a/test
  # ln a/test b/test
  ln: failed to create hard link `b/test' => `a/test': No such file or  directory

However when creating links in the same dir, it worked well.

Now the link gets created.

Fixes: 0e048316 ("ocfs2: check existence of old dentry in ocfs2_link()")
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Reported-by: Szabo Aron - UBIT <aron@ubit.hu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Tested-by: Aron Szabo <aron@ubit.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

My ISP finally gave up on the old mail address, so I am moving things
over to bitmath.org instead.  Also change the status fields to better
reflect reality.
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tejun, while reviewing the code, spotted the following race condition
between the dirtying and truncation of a page:

__set_page_dirty_nobuffers()       __delete_from_page_cache()
  if (TestSetPageDirty(page))
                                     page->mapping = NULL
				     if (PageDirty())
				       dec_zone_page_state(page, NR_FILE_DIRTY);
				       dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
    if (page->mapping)
      account_page_dirtied(page)
        __inc_zone_page_state(page, NR_FILE_DIRTY);
	__inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);

which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE.

Dirtiers usually lock out truncation, either by holding the page lock
directly, or in case of zap_pte_range(), by pinning the mapcount with
the page table lock held.  The notable exception to this rule, though,
is do_wp_page(), for which this race exists.  However, do_wp_page()
already waits for a locked page to unlock before setting the dirty bit,
in order to prevent a race where clear_page_dirty() misses the page bit
in the presence of dirty ptes.  Upgrade that wait to a fully locked
set_page_dirty() to also cover the situation explained above.

Afterwards, the code in set_page_dirty() dealing with a truncation race
is no longer needed.  Remove it.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Constantly forking task causes unlimited grow of anon_vma chain.  Each
next child allocates new level of anon_vmas and links vma to all
previous levels because pages might be inherited from any level.

This patch adds heuristic which decides to reuse existing anon_vma
instead of forking new one.  It adds counter anon_vma->degree which
counts linked vmas and directly descending anon_vmas and reuses anon_vma
if counter is lower than two.  As a result each anon_vma has either vma
or at least two descending anon_vmas.  In such trees half of nodes are
leafs with alive vmas, thus count of anon_vmas is no more than two times
bigger than count of vmas.

This heuristic reuses anon_vmas as few as possible because each reuse
adds false aliasing among vmas and rmap walker ought to scan more ptes
when it searches where page is might be mapped.

Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu
Fixes: 5beb4930 ("mm: change anon_vma linking to fix multi-process server scalability issue")
[akpm@linux-foundation.org: fix typo, per Rik]
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu>
Tested-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Jerome Marchand <jmarchan@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>	[2.6.34+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wait_consider_task() checks EXIT_ZOMBIE after EXIT_DEAD/EXIT_TRACE and
both checks can fail if we race with EXIT_ZOMBIE -> EXIT_DEAD/EXIT_TRACE
change in between, gcc needs to reload p->exit_state after
security_task_wait().  In this case ->notask_error will be wrongly
cleared and do_wait() can hang forever if it was the last eligible
child.

Many thanks to Arne who carefully investigated the problem.

Note: this bug is very old but it was pure theoretical until commit
b3ab0316 ("wait: completely ignore the EXIT_DEAD tasks").  Before
this commit "-O2" was probably enough to guarantee that compiler won't
read ->exit_state twice.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Arne Goedeke <el@laramies.com>
Tested-by: Arne Goedeke <el@laramies.com>
Cc: <stable@vger.kernel.org>	[3.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In dlm_process_recovery_data, only when dlm_new_lock failed the ret will
be set to -ENOMEM.  And in this case, newlock is definitely NULL.  So
test newlock is meaningless, remove it.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:
 "Just a pile of random fixes, including:

   1) Do not apply TSO limits to non-TSO packets, fix from Herbert Xu.

   2) MDI{,X} eeprom check in e100 driver is reversed, from John W.
      Linville.

   3) Missing error return assignments in several ethernet drivers, from
      Julia Lawall.

   4) Altera TSE device doesn't come back up after ifconfig down/up
      sequence, fix from Kostya Belezko.

   5) Add more cases to the check for whether the qmi_wwan device has a
      bogus MAC address and needs to be assigned a random one.  From
      Kristian Evensen.

   6) Fix interrupt hangs in CPSW, from Felipe Balbi.

   7) Implement ndo_features_check in r8152 so that the stack doesn't
      feed GSO packets which are outside of the chip's capabilities.
      From Hayes Wang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  qla3xxx: don't allow never end busy loop
  xen-netback: fixing the propagation of the transmit shaper timeout
  r8152: support ndo_features_check
  batman-adv: fix potential TT client + orig-node memory leak
  batman-adv: fix multicast counter when purging originators
  batman-adv: fix counter for multicast supporting nodes
  batman-adv: fix lock class for decoding hash in network-coding.c
  batman-adv: fix delayed foreign originator recognition
  batman-adv: fix and simplify condition when bonding should be used
  Revert "mac80211: Fix accounting of the tailroom-needed counter"
  net: ethernet: cpsw: fix hangs with interrupts
  enic: free all rq buffs when allocation fails
  qmi_wwan: Set random MAC on devices with buggy fw
  openvswitch: Consistently include VLAN header in flow and port stats.
  tcp: Do not apply TSO segment limit to non-TSO packets
  Altera TSE: Add missing phydev
  net/mlx4_core: Fix error flow in mlx4_init_hca()
  net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow
  qlcnic: Fix return value in qlcnic_probe()
  net: axienet: fix error return code
  ...

Pull IPMI fixlet from Corey Minyard:
 "Fix a compile warning"

* tag 'for-linus-3' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: Fix compile warning with tv_usec

The counter variable wasn't increased at all which may stuck under
certain circumstances.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ext4 bugfixes from Ted Ts'o:
 "Revert a potential seek_data/hole regression which shows up when using
  ext4 to handle ext3 file systems, plus two minor bug fixes"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: remove spurious KERN_INFO from ext4_warning call
  Revert "ext4: fix suboptimal seek_{data,hole} extents traversial"
  ext4: prevent online resize with backup superblock

Jay Foad reports that the address sanitizer test (asan) sometimes gets
confused by a stack pointer that ends up being outside the stack vma
that is reported by /proc/maps.

This happens due to an interaction between RLIMIT_STACK and the guard
page: when we do the guard page check, we ignore the potential error
from the stack expansion, which effectively results in a missing guard
page, since the expected stack expansion won't have been done.

And since /proc/maps explicitly ignores the guard page (commit
d7824370: "mm: fix up some user-visible effects of the stack guard
page"), the stack pointer ends up being outside the reported stack area.

This is the minimal patch: it just propagates the error.  It also
effectively makes the guard page part of the stack limit, which in turn
measn that the actual real stack is one page less than the stack limit.

Let's see if anybody notices.  We could teach acct_stack_growth() to
allow an extra page for a grow-up/grow-down stack in the rlimit test,
but I don't want to add more complexity if it isn't needed.
Reported-and-tested-by: Jay Foad <jay.foad@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Included changes:
- ensure bonding is used (if enabled) for packets coming in the soft
  interface
- fix race condition to avoid orig_nodes to be deleted right after
  being added
- avoid false positive lockdep splats by assigning lockclass to
  the proper hashtable lock objects
- avoid miscounting of multicast 'disabled' nodes in the network
- fix memory leak in the Global Translation Table in case of
  originator interval change
Signed-off-by: David S. Miller <davem@davemloft.net>

Since e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct"),
the transimt shaper timeout is always set to 0.  The value the user sets via
xenbus is never propagated to the transmit shaper.

This patch fixes the issue.

Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: Imre Palik <imrep@amazon.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2015-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Here's just a single fix - a revert of a patch that broke the
p54 and cw2100 drivers (arguably due to bad assumptions there.)
Since this affects kernels since 3.17, I decided to revert for
now and we'll revisit this optimisation properly for -next.
Signed-off-by: David S. Miller <davem@davemloft.net>

Support ndo_features_check to avoid:
 - the transport offset is more than the hw limitation when using hw checksum.
 - the skb->len of a GSO packet is more than the limitation.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a potential memory leak which can occur once an
originator times out. On timeout the according global translation table
entry might not get purged correctly. Furthermore, the non purged TT
entry will cause its orig-node to leak, too. Which additionally can lead
to the new multicast optimization feature not kicking in because of a
therefore bogus counter.

In detail: The batadv_tt_global_entry->orig_list holds the reference to
the orig-node. Usually this reference is released after
BATADV_PURGE_TIMEOUT through: _batadv_purge_orig()->
batadv_purge_orig_node()->batadv_update_route()->_batadv_update_route()->
batadv_tt_global_del_orig() which purges this global tt entry and
releases the reference to the orig-node.

However, if between two batadv_purge_orig_node() calls the orig-node
timeout grew to 2*BATADV_PURGE_TIMEOUT then this call path isn't
reached. Instead the according orig-node is removed from the
originator hash in _batadv_purge_orig(), the batadv_update_route()
part is skipped and won't be reached anymore.

Fixing the issue by moving batadv_tt_global_del_orig() out of the rcu
callback.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

When purging an orig_node we should only decrease counter tracking the
number of nodes without multicast optimizations support if it was
increased through this orig_node before.

A not yet quite initialized orig_node (meaning it did not have its turn
in the mcast-tvlv handler so far) which gets purged would not adhere to
this and will lead to a counter imbalance.

Fixing this by adding a check whether the orig_node is mcast-initalized
before decreasing the counter in the mcast-orig_node-purging routine.

Introduced by 60432d75
("batman-adv: Announce new capability via multicast TVLV")
Reported-by: Tobias Hachmer <tobias@hachmer.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

A miscounting of nodes having multicast optimizations enabled can lead
to multicast packet loss in the following scenario:

If the first OGM a node receives from another one has no multicast
optimizations support (no multicast tvlv) then we are missing to
increase the counter. This potentially leads to the wrong assumption
that we could safely use multicast optimizations.

Fixings this by increasing the counter if the initial OGM has the
multicast TVLV unset, too.

Introduced by 60432d75
("batman-adv: Announce new capability via multicast TVLV")
Reported-by: Tobias Hachmer <tobias@hachmer.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

batadv_has_set_lock_class() is called with the wrong hash table as first
argument (probably due to a copy-paste error), which leads to false
positives when running with lockdep.

Introduced-by: 612d2b4f
("batman-adv: network coding - save overheard and tx packets for decoding")
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

Currently it can happen that the reception of an OGM from a new
originator is not being accepted. More precisely it can happen that
an originator struct gets allocated and initialized
(batadv_orig_node_new()), even the TQ gets calculated and set correctly
(batadv_iv_ogm_calc_tq()) but still the periodic orig_node purging
thread will decide to delete it if it has a chance to jump between
these two function calls.

This is because batadv_orig_node_new() initializes the last_seen value
to zero and its caller (batadv_iv_ogm_orig_get()) makes it visible to
other threads by adding it to the hash table already.
batadv_iv_ogm_calc_tq() will set the last_seen variable to the correct,
current time a few lines later but if the purging thread jumps in between
that it will think that the orig_node timed out and will wrongly
schedule it for deletion already.

If the purging interval is the same as the originator interval (which is
the default: 1 second), then this game can continue for several rounds
until the random OGM jitter added enough difference between these
two (in tests, two to about four rounds seemed common).

Fixing this by initializing the last_seen variable of an orig_node
to the current time before adding it to the hash table.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

The current condition actually does NOT consider bonding when the
interface the packet came in from is the soft interface, which is the
opposite of what it should do (and the comment describes). Fix that and
slightly simplify the condition.
Reported-by: Ray Gibson <booray@gmail.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

Pull powerpc fixes from Michael Ellerman:

 - Wire up sys_execveat(). Tested on 32 & 64 bit.

 - Fix for kdump on LE systems with cpus hot unplugged.

 - Revert Anton's fix for "kernel BUG at kernel/smpboot.c:134!", this
   broke other platforms, we'll do a proper fix for 3.20.

* tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active and online"
  powerpc/kdump: Ignore failure in enabling big endian exception during crash
  powerpc: Wire up sys_execveat() syscall

Pull ia64 fixlet from Tony Luck:
 "Add execveat syscall"

* tag 'please-pull-syscall' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Enable execveat syscall for ia64

See commit 51f39a1f
    syscalls: implement execveat() system call
Signed-off-by: Tony Luck <tony.luck@intel.com>

This reverts commit ca34e3b5.

It turns out that the p54 and cw2100 drivers assume that there's
tailroom even when they don't say they really need it. However,
there's currently no way for them to explicitly say they do need
it, so for now revert this.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=90331.

Cc: stable@vger.kernel.org
Fixes: ca34e3b5 ("mac80211: Fix accounting of the tailroom-needed counter")
Reported-by: Christopher Chavez <chrischavez@gmx.us>
Bisected-by: Larry Finger <Larry.Finger@lwfinger.net>
Debugged-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The CPSW IP implements pulse-signaled interrupts. Due to
that we must write a correct, pre-defined value to the
CPDMA_MACEOIVECTOR register so the controller generates
a pulse on the correct IRQ line to signal the End Of
Interrupt.

The way the driver is written today, all four IRQ lines
are requested using the same IRQ handler and, because of
that, we could fall into situations where a TX IRQ fires
but we tell the controller that we ended an RX IRQ (or
vice-versa). This situation triggers an IRQ storm on the
reserved IRQ 127 of INTC which will in turn call ack_bad_irq()
which will, then, print a ton of:

	unexpected IRQ trap at vector 00

In order to fix the problem, we are moving all calls to
cpdma_ctlr_eoi() inside the IRQ handler and making sure
we *always* write the correct value to the CPDMA_MACEOIVECTOR
register. Note that the algorithm assumes that IRQ numbers and
value-to-be-written-to-EOI are proportional, meaning that a
write of value 0 would trigger an EOI pulse for the RX_THRESHOLD
Interrupt and that's the IRQ number sitting in the 0-th index
of our irqs_table array.

This, however, is safe at least for current implementations of
CPSW so we will refrain from making the check smarter (and, as
a side-effect, slower) until we actually have a platform where
IRQ lines are swapped.

This patch has been tested for several days with AM335x- and
AM437x-based platforms. AM57x was left out because there are
still pending patches to enable ethernet in mainline for that
platform. A read of the TRM confirms the statement on previous
paragraph.
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Fixes: 510a1e7 (drivers: net: davinci_cpdma: acknowledge interrupt properly)
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull UML fixes from Richard Weinberger:
 "Two fixes for UML regressions. Nothing exciting"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  x86, um: actually mark system call tables readonly
  um: Skip futex_atomic_cmpxchg_inatomic() test

Commit 9fc2105a ("ARM: 7830/1: delay: don't bother reporting
bogomips in /proc/cpuinfo") breaks audio in python, and probably
elsewhere, with message

  FATAL: cannot locate cpu MHz in /proc/cpuinfo

I'm not the first one to hit it, see for example

  https://theredblacktree.wordpress.com/2014/08/10/fatal-cannot-locate-cpu-mhz-in-proccpuinfo/
  https://devtalk.nvidia.com/default/topic/765800/workaround-for-fatal-cannot-locate-cpu-mhz-in-proc-cpuinf/?offset=1

Reading original changelog, I have to say "Stop breaking working setups.
You know who you are!".
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a074335a ("x86, um: Mark system call tables readonly") was
supposed to mark the sys_call_table in UML as RO by adding the const,
but it doesn't have the desired effect as it's nevertheless being placed
into the data section since __cacheline_aligned enforces sys_call_table
being placed into .data..cacheline_aligned instead. We need to use
the ____cacheline_aligned version instead to fix this issue.

Before:

$ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table"
                 U sys_writev
0000000000000000 D sys_call_table
0000000000000000 D syscall_table_size

After:

$ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table"
                 U sys_writev
0000000000000000 R sys_call_table
0000000000000000 D syscall_table_size

Fixes: a074335a ("x86, um: Mark system call tables readonly")
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

futex_atomic_cmpxchg_inatomic() does not work on UML because
it triggers a copy_from_user() in kernel context.
On UML copy_from_user() can only be used if the kernel was called
by a real user space process such that UML can use ptrace()
to fetch the value.
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Daniel Walter <d.walter@0x90.at>

When allocation of all RQs fail, we do not free previously allocated buffers,
before returning error. This causes memory leak.

This patch fixes this by calling vnic_rq_clean(), which frees all the rq
buffers.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some buggy firmwares export an incorrect MAC address (00:a0:c6:00:00:00). This
makes for example checking devices for random MAC addresses tricky, and you
might end up with multiple network interfaces with the same address.

This patch tries to fix, or at least improve, the situation by setting the MAC
address of devices with this firmware bug to a random address. I tested the
patch with two devices that has this firmware bug (Huawei E398 and E392), and
network traffic worked fine after changing the address.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "This is a set of three fixes: one to correct an abort path thinko
  causing failures (and a panic) in USB on device misbehaviour, One to
  fix an out of order issue in the fnic driver and one to match discard
  expectations to qemu which otherwise cause Linux to behave badly as a
  guest"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  SCSI: fix regression in scsi_send_eh_cmnd()
  fnic: IOMMU Fault occurs when IO and abort IO is out of order
  sd: tweak discard heuristics to work around QEMU SCSI issue