- 26 Jun, 2006 35 commits
-
-
Jon Mason authored
Replace hard coded DMA masks with #defines from include/linux/dma-mapping.h Signed-off-by:
Jon Mason <jdmason@us.ibm.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Gerd Hoffmann authored
Changes are largely identical to the i386 version: * alternative #define are moved to the new alternative.h file. * one new elf section with pointers to the lock prefixes which can be nop'ed out for non-smp. * two new elf sections simliar to the "classic" alternatives to replace SMP code with simpler UP code. * fixup headers to use alternative.h instead of defining their own LOCK / LOCK_PREFIX macros. The patch reuses the i386 version of the alternatives code to avoid code duplication. The code in alternatives.c was shuffled around a bit to reduce the number of #ifdefs needed. It also got some tweaks needed for x86_64 (vsyscall page handling) and new features (noreplacement option which was x86_64 only up to now). Debug printk's are changed from compile-time to runtime. Loosely based on a early version from Bastian Blank <waldi@debian.org> Signed-off-by:
Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Andi Kleen authored
Intel systems report the cache level data from CPUID 4 in sysfs. Add a CPUID 4 emulation for AMD CPUs to report the same information for them. This allows programs to read this information in a uniform way. The AMD way to report this is less flexible so some assumptions are hardcoded (e.g. no L3) Signed-off-by:
-
Andi Kleen authored
Previously the apicid<->coreid split was computed based on the max number of cores. Now use a new CPUID AMD defined for that. On most systems right now it should be 0 and the old method will be used. Signed-off-by:
-
Andi Kleen authored
Inspired from i386 changes Signed-off-by:
-
ravikiran thirumalai authored
vSMPowered systems use apic_cluster too. Forcing apic_physflat works on these systems too, but only if we change phys_pkg_id to use hard_smp_prcoessor_id() instead of cpuid_ebx. I am guessing other multichassi cluster systems would need this too. Signed-off-by:
ravikiran thirumalai <kiran@scalex86.org> Signed-off-by:
-
Andi Kleen authored
Enable some hwmon drivers as modules and tulip and stack unwinding Kernel image should be somewhat bigger now because of the unwind information being included, but you'll get exact backtraces for that. Signed-off-by:
-
Malcolm Parsons authored
binfmt_flat.c calls set_personality with PER_LINUX as the personality. On the arm architecture this results in the program running in 26bit usermode. PER_LINUX_32BIT should be used instead. This doesn't affect other architectures that use binfmt_flat. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
Change enable_irq() macro to be a statement, not expression. Signed-off-by:
-
Greg Ungerer authored
Fix PLL setting for the Coldfire 5249 CPU. This brings it into line with the new style frequency configuration of m68knommu parts. Signed-off-by:
-
Greg Ungerer authored
Fix flush code for the ColdFire 5206/5206e/5272 cases. Add support for the new ColdFire 532x CPU family Signed-off-by:
-
Philippe De Muyter authored
Here is a patch to the system call handling for 5307/5272/etc to: - fix the strace support (one tested the wrong bit) - make all system calls a little bit faster by inlining set_esp0 and supporting ENOSYS out of the critical path. - remove extraneous spaces Signed-off-by:
-
Greg Ungerer authored
This patch solve a bug triggered by execvp (this function use calloc to store the argument list and gcc 3.4.x align the stack to word, not to dword). This situation aren't related to signal handling and all 2.6.x have the bug. On ColdFire targets we must force the stack to be aligned. Original patch from Andrea Tarani <andrea.tarani@gilbarco.com>, Signed-off-by:
-
Greg Ungerer authored
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by:
-
Greg Ungerer authored
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by:
-
Greg Ungerer authored
Add support for the AVNET 5282 board. Patch submitted by Daniel Alomar <dalomar@serrasold.com>. Signed-off-by:
-
Greg Ungerer authored
Add configure support for the new Freescale 532x family of CPUs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by:
-
Linus Torvalds authored
This reverts commits 3e3318de [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages b6370d96 [PATCH] swsusp: i386 mark special saveable/unsaveable pages ce4ab001 [PATCH] swsusp: add architecture special saveable pages support because not only do they apparently cause page faults on x86, the infrastructure doesn't compile on powerpc. Signed-off-by:
-
Greg Ungerer authored
Add build support for the new Freescale 532x CPU platforms. Signed-off-by:
-
Greg Ungerer authored
Add support for the UART addressing on the new Freescale M532x CPU family. Signed-off-by:
-
Greg Ungerer authored
Add build support for new Freescale M532x CPU family timer. Signed-off-by:
-
Greg Ungerer authored
A cleanup of m68knommu/kernel/setup.c : - No need to initialize global pointers to NULL, they will have that value automatically, and they eat up space in my data segment image in FLASH. - Remove get_cpuinfo. It has been replaced by show_cpuinfo. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
Greg Ungerer authored
Don't rely on DEBUG having a value, check for it being defined. Signed-off-by:
-
Greg Ungerer authored
Include the ColdFire 532x support when including ColdFire peripharp support definitions. Signed-off-by:
-
Greg Ungerer authored
Add cache init support for the new ColdFire 532x CPU family. Signed-off-by:
-
Greg Ungerer authored
ColdFire serial driver support for the new 532x CPU family UARTs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by:
-
Greg Ungerer authored
Register definitions for the new Freescale 532x Coldfire CPU family. Signed-off-by:
-
Greg Ungerer authored
Add kernel startup code for the new Freescale 532x CPU family. Signed-off-by:
-
Greg Ungerer authored
Modify the m68knommu/ColdFire PIT timer code to use register offsets with raw_read/raw_write access, instead of a mapped struct. Signed-off-by:
-
Greg Ungerer authored
Remove use of rom_length. It serves not real purpose, and when we move to new stye RAM configuration it will not be needed. Signed-off-by:
-
Greg Ungerer authored
Switch to naming the architecture config options for the m68knommu branch as "M68K", dropping "M68KNOMMU". The CONFIG_MMU separates the 2 now, and the m68knommu branch is still strictly speaking an M68K (including the ColdFire parts). Signed-off-by:
-
Greg Ungerer authored
Modify the m68knommu/ColdFire core timer code to use register offsets with raw_read/raw_write access, instead of a mapped struct. Signed-off-by:
-
Greg Ungerer authored
Specify the struct mapping used on the new Freescale 532x CPU family's FEC ethernet core. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by:
-
- 25 Jun, 2006 5 commits
-
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: iSER Kconfig and Makefile IB/iser: iSER handling of memory for RDMA IB/iser: iSER RDMA CM (CMA) and IB verbs interaction IB/iser: iSER initiator iSCSI PDU and TX/RX IB/iser: iSCSI iSER transport provider high level code IB/iser: iSCSI iSER transport provider header file IB/uverbs: Remove unnecessary list_del()s IB/uverbs: Don't free wr list when it's known to be empty
-
Linus Torvalds authored
Trond had apparently merged the same patch twice, causing a duplicate include of the "internal.h" file, with resulting obvious confusion. Tssk. I'm the only one allowed to send out trees that don't even compile! Who does this Trond guy think he is? Signed-off-by: -
Björn Steinbrink authored
Copy the softirq bits in preempt_count from the current context into the hardirq context when using 4K stacks to make the softirq_count macro work correctly and thereby fix softirq cpu time accounting. Signed-off-by:
Björn Steinbrink <B.Steinbrink@gmx.de> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (51 commits) nfs: remove nfs_put_link() nfs-build-fix-99 git-nfs-build-fixes Merge branch 'odirect' NFS: alloc nfs_read/write_data as direct I/O is scheduled NFS: Eliminate nfs_get_user_pages() NFS: refactor nfs_direct_free_user_pages NFS: remove user_addr, user_count, and pos from nfs_direct_req NFS: "open code" the NFS direct write rescheduler NFS: Separate functions for counting outstanding NFS direct I/Os NLM: Fix reclaim races NLM: sem to mutex conversion locks.c: add the fl_owner to nlm_compare_locks NFS: Display the chosen RPCSEC_GSS security flavour in /proc/mounts NFS: Split fs/nfs/inode.c NFS: Fix typo in nfs_do_clone_mount() NFS: Fix compile errors introduced by referrals patches NFSv4: Ensure that referral mounts bind to a reserved port NFSv4: A root pathname is sent as a zero component4 NFSv4: Follow a referral ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (244 commits) V4L/DVB (4210b): git-dvb: tea575x-tuner build fix V4L/DVB (4210a): git-dvb versus matroxfb V4L/DVB (4209): Added some BTTV PCI IDs for newer boards Fixes some sync issues between V4L/DVB development and GIT V4L/DVB (4206): Cx88-blackbird: always set encoder height based on tvnorm->id V4L/DVB (4205): Merge tda9887 module into tuner. V4L/DVB (4203): Explicitly set the enum values. V4L/DVB (4202): allow selecting CX2341x port mode V4L/DVB (4200): Disable bitrate_mode when encoding mpeg-1. V4L/DVB (4199): Add cx2341x-specific control array to cx2341x.c V4L/DVB (4198): Avoid newer usages of obsoleted experimental MPEGCOMP API V4L/DVB (4197): Port new MPEG API to saa7134-empress with saa6752hs V4L/DVB (4196): Port cx88-blackbird to the new MPEG API. V4L/DVB (4193): Update cx2341x fw encoding API doc. V4L/DVB (4192): Use control helpers for saa7115, cx25840, msp3400. V4L/DVB (4191): Add CX2341X MPEG encoder module. V4L/DVB (4190): Add helper functions for control processing to v4l2-common. V4L/DVB (4189): Add videodev support for VIDIOC_S/G/TRY_EXT_CTRLS. V4L/DVB (4188): Add new MPEG control/ioctl definitions to videodev2.h V4L/DVB (4186): Add support for the DNTV Live! mini DVB-T card. ...
-
