- 02 Oct, 2020 40 commits
-
-
Peter Chen authored
Some PHYs may need to enter related mode, and do some settings. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org>
-
Peter Chen authored
It is meaningless to handle any interrupts after disconnecting with host Signed-off-by:
-
Peter Chen authored
Below is the recommendation from Cadence designer: Using this bit to be sure that PHY clock is keeping up in active state. It's good to keep Fast Access bit enabled as long as there is any access to USB register. It is used to fix the potential ARM core hang when visit controller register after DEVDS (.pullup is cleared) is set, the threaded irq may be scheduled at that time. Cc: Pawel Laszczak <pawell@cadence.com> Reviewed-by:
Jun Li <jun.li@nxp.com> Signed-off-by:
-
Peter Chen authored
If the board uses role switch class for switching the role, it should not depends on SoC OTG hardware siginal any more, so quit early. Signed-off-by:
-
Raymond Tan authored
Similar to some other IA platforms, Elkhart Lake too depends on the PMU register write to request transition of Dx power state. Thus, we add the PCI_DEVICE_ID_INTEL_EHLLP to the list of devices that shall execute the ACPI _DSM method during D0/D3 sequence. [heikki.krogerus@linux.intel.com: included Fixes tag] Fixes: dbb0569d ("usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices") Cc: stable@vger.kernel.org Signed-off-by:
Raymond Tan <raymond.tan@intel.com> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Marc Zyngier authored
If the dwc2 driver fails to probe after having enabled the regulators, it ends up being unregistered with regulators enabled, something the core regulator code is legitimately upset about: dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator dwc2 ff400000.usb: dwc2_core_reset: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE WARNING: CPU: 2 PID: 112 at drivers/regulator/core.c:2074 _regulator_put.part.0+0x16c/0x174 Modules linked in: dwc2(E+) dwc3(E) udc_core(E) rtc_hym8563(E) dwmac_generic(E) ulpi(E) usbcore(E) dwc3_meson_g12a(E) roles(E) meson_gx_mmc(E+) i2c_meson(E) mdio_mux_meson_g12a(E) mdio_mux(E) dwmac_meson8b(E) stmmac_platform(E) stmmac(E) mdio_xpcs(E) phylink(E) of_mdio(E) fixed_phy(E) libphy(E) pwm_regulator(E) fixed(E) CPU: 2 PID: 112 Comm: systemd-udevd Tainted: G E 5.9.0-rc4-00102-g423583bc8cf9 #1840 Hardware name: amlogic w400/w400, BIOS 2020.04 05/22/2020 pstate: 80400009 (Nzcv daif +PAN -UAO BTYPE=--) pc : _regulator_put.part.0+0x16c/0x174 lr : regulator_bulk_free+0x6c/0x9c sp : ffffffc012353820 x29: ffffffc012353820 x28: ffffff805a4b7000 x27: ffffff8059c2eac0 x26: ffffff8059c2e810 x25: ffffff805a4b7d00 x24: ffffffc008cf3028 x23: ffffffc011729ef8 x22: ffffff807e2761d8 x21: ffffffc01171df78 x20: ffffff805a4b7700 x19: ffffff805a4b7700 x18: 0000000000000030 x17: 0000000000000000 x16: 0000000000000000 x15: ffffff807ea8d178 x14: 3935312820435455 x13: 2038323a36313a37 x12: ffffffffffffffff x11: 0000000000000040 x10: 0000000000000007 x9 : ffffffc0106f77d0 x8 : ffffffffffffffe0 x7 : ffffffffffffffff x6 : 0000000000017702 x5 : ffffff805a4b7400 x4 : 0000000000000000 x3 : ffffffc01171df78 x2 : ffffff807ea8cc40 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: _regulator_put.part.0+0x16c/0x174 regulator_bulk_free+0x6c/0x9c devm_regulator_bulk_release+0x28/0x3c release_nodes+0x1c8/0x2c0 devres_release_all+0x44/0x6c really_probe+0x1ec/0x504 driver_probe_device+0x100/0x170 device_driver_attach+0xcc/0xd4 __driver_attach+0xb0/0x17c bus_for_each_dev+0x7c/0xd4 driver_attach+0x30/0x3c bus_add_driver+0x154/0x250 driver_register+0x84/0x140 __platform_driver_register+0x54/0x60 dwc2_platform_driver_init+0x2c/0x1000 [dwc2] do_one_initcall+0x54/0x2d0 do_init_module+0x68/0x29c In order to fix this, tie the regulator disabling to the teardown process by registering a devm action callback. This makes sure that the regulators are disabled at the right time (just before they are released). Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Pawel Laszczak authored
This patch replace config_ep_by_speed with config_ep_by_speed_and_alt. This change allows to select proper usb_ss_ep_comp_descriptor for each stream capable endpoints. f_tcm function for SS use array of headers for both BOT/UAS alternate setting: static struct usb_descriptor_header *uasp_ss_function_desc[] = { (struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL, }; The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS. During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object. Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to bot_uasp_ss_bi_desc. And in result it uses the descriptor from BOT alternate setting instead UAS. Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot. Signed-off-by:Jayshri Pawar <jpawar@cadence.com> Signed-off-by:
Pawel Laszczak <pawell@cadence.com> Reviewed-by:
-
Qinglang Miao authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Acked-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Christian Lamparter authored
adds the specific compatible string for the DWC2 IP found in the APM82181 SoCs. The IP is setup correctly through the auto detection... With the exception of the AHB Burst Size. The default of GAHBCFG_HBSTLEN_INCR4 of the "snps,dwc2" can cause a system hang when the USB and SATA is used concurrently. Because the predecessor (PPC460EX (Canyonlands)) already had the same problem, this SoC can make use of the existing dwc2_set_amcc_params() function. Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Christian Lamparter authored
adds the specific compatible string for the DWC2 IP found in the APM82181 SoCs. The APM82181's USB-OTG seems like it was taken from its direct predecessor: the PPC460EX (canyonlands). Signed-off-by:
-
Bryan O'Donoghue authored
commit 2b74b0a0 ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()") adds important bounds checking however it unfortunately also introduces a bug with respect to section 3.3.1 of the NCM specification. wDatagramIndex[1] : "Byte index, in little endian, of the second datagram described by this NDP16. If zero, then this marks the end of the sequence of datagrams in this NDP16." wDatagramLength[1]: "Byte length, in little endian, of the second datagram described by this NDP16. If zero, then this marks the end of the sequence of datagrams in this NDP16." wDatagramIndex[1] and wDatagramLength[1] respectively then may be zero but that does not mean we should throw away the data referenced by wDatagramIndex[0] and wDatagramLength[0] as is currently the case. Breaking the loop on (index2 == 0 || dg_len2 == 0) should come at the end as was previously the case and checks for index2 and dg_len2 should be removed since zero is valid. I'm not sure how much testing the above patch received but for me right now after enumeration ping doesn't work. Reverting the commit restores ping, scp, etc. The extra validation associated with wDatagramIndex[0] and wDatagramLength[0] appears to be valid so, this change removes the incorrect restriction on wDatagramIndex[1] and wDatagramLength[1] restoring data processing between host and device. Fixes: 2b74b0a0 ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()") Cc: Ilja Van Sprundel <ivansprundel@ioactive.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Pawel Laszczak authored
USB2.0 PHY hangs in Rx Compliance test when the incoming packet amplitude is varied below and above the Squelch Level of Receiver during the active packet multiple times. Version 1 of the controller allows PHY to be reset when RX fail condition is detected to work around the above issue. This feature is disabled by default and needs to be enabled using a bit from the newly added PHYRST_CFG register. This patch enables the workaround. There is no way to know controller version before device controller is started and the workaround needs to be applied for both host and device modes, so we rely on a DT property do decide when to apply the workaround. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Roger Quadros authored
Controller version 0x0002450D has USB2 PHY RX sensitivity issues that needs to be worked around by enabling phyrst-a-enable bit in PHYRST_CFG register. There is no way to know controller version before device controller is started and the workaround needs to be applied for both host and device modes, so we add this DT property. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Roger Quadros authored
Converts cdns-usb3.txt to YAML schema cdns,usb3.yaml Reviewed-by:
-
Neil Armstrong authored
The Amlogic AXG is close to the GXL Glue but with a single OTG PHY. It needs the same init sequence as GXL & GXM, but it seems it doesn't need the host disconnect bit. Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
The Amlogic AXG is close to the GXL Glue but with a single OTG PHY. Reviewed-by:
-
Lad Prabhakar authored
Document r8a774e1 xhci support. The driver will use the fallback compatible string "renesas,rcar-gen3-xhci", therefore no driver change is needed. Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Linus Walleij authored
This switches the PCH UDC driver to use GPIO descriptors. The way this is supposed to be used is confusing. The code contains the following: /* GPIO port for VBUS detecting */ static int vbus_gpio_port = -1; /* GPIO port number (-1:Not used) */ So a hardcoded GPIO number in the code. Further the probe() path very clearly will exit if the GPIO is not found, so this driver can only be configured by editing the code, hard-coding a GPIO number into this variable. This is simply not how we do things. My guess is that this is used in products by patching a GPIO number into this variable and shipping a kernel that is compile-time tailored for the target system. I switched this mechanism to using a GPIO descriptor associated with the parent PCI device. This can be added by using the 16bit subsystem ID or similar to identify which exact machine we are running on and what GPIO is present on that machine, and then add a GPIO descriptor using gpiod_add_lookup_table() from <linux/gpio/machine.h>. Since I don't have any target systems I cannot add this but I'm happy to help. I put in a FIXME so the people actually using this driver knows what to do. Cc: Felipe Balbi <balbi@kernel.org> Tested-by:Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Peter Chen authored
Add imx glue layer runtime pm implementation, and the runtime pm is default off. Reviewed-by:
-
Peter Chen authored
Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by:
-
Peter Chen authored
Since we have both USB2 and USB3 PHYs for cdns3 controller, it is better we have unity APIs to handle both USB2 and USB3's power, it could simplify code for error handling and further power management implementation. Reviewed-by:
-
YueHaibing authored
It is never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Li Jun authored
Do not try to queue a drd work if dr_mode is not USB_DR_MODE_OTG because the work is not inited, this may be triggered by user try to change mode file of debugfs on a single role port, which will cause below kernel dump: [ 60.115529] ------------[ cut here ]------------ [ 60.120166] WARNING: CPU: 1 PID: 627 at kernel/workqueue.c:1473 __queue_work+0x46c/0x520 [ 60.128254] Modules linked in: [ 60.131313] CPU: 1 PID: 627 Comm: sh Not tainted 5.7.0-rc4-00022-g914a586-dirty #135 [ 60.139054] Hardware name: NXP i.MX8MQ EVK (DT) [ 60.143585] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 60.148376] pc : __queue_work+0x46c/0x520 [ 60.152385] lr : __queue_work+0x314/0x520 [ 60.156393] sp : ffff8000124ebc40 [ 60.159705] x29: ffff8000124ebc40 x28: ffff800011808018 [ 60.165018] x27: ffff800011819ef8 x26: ffff800011d39980 [ 60.170331] x25: ffff800011808018 x24: 0000000000000100 [ 60.175643] x23: 0000000000000013 x22: 0000000000000001 [ 60.180955] x21: ffff0000b7c08e00 x20: ffff0000b6c31080 [ 60.186267] x19: ffff0000bb99bc00 x18: 0000000000000000 [ 60.191579] x17: 0000000000000000 x16: 0000000000000000 [ 60.196891] x15: 0000000000000000 x14: 0000000000000000 [ 60.202202] x13: 0000000000000000 x12: 0000000000000000 [ 60.207515] x11: 0000000000000000 x10: 0000000000000040 [ 60.212827] x9 : ffff800011d55460 x8 : ffff800011d55458 [ 60.218138] x7 : ffff0000b7800028 x6 : 0000000000000000 [ 60.223450] x5 : ffff0000b7800000 x4 : 0000000000000000 [ 60.228762] x3 : ffff0000bb997cc0 x2 : 0000000000000001 [ 60.234074] x1 : 0000000000000000 x0 : ffff0000b6c31088 [ 60.239386] Call trace: [ 60.241834] __queue_work+0x46c/0x520 [ 60.245496] queue_work_on+0x6c/0x90 [ 60.249075] dwc3_set_mode+0x48/0x58 [ 60.252651] dwc3_mode_write+0xf8/0x150 [ 60.256489] full_proxy_write+0x5c/0xa8 [ 60.260327] __vfs_write+0x18/0x40 [ 60.263729] vfs_write+0xdc/0x1c8 [ 60.267045] ksys_write+0x68/0xf0 [ 60.270360] __arm64_sys_write+0x18/0x20 [ 60.274286] el0_svc_common.constprop.0+0x68/0x160 [ 60.279077] do_el0_svc+0x20/0x80 [ 60.282394] el0_sync_handler+0x10c/0x178 [ 60.286403] el0_sync+0x140/0x180 [ 60.289716] ---[ end trace 70b155582e2b7988 ]--- Signed-off-by:
-
Zqiang authored
Fix this by increase object reference count. BUG: KASAN: use-after-free in __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831 Read of size 8 at addr ffff8880683b0018 by task syz-executor.0/3377 CPU: 1 PID: 3377 Comm: syz-executor.0 Not tainted 5.6.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831 lock_acquire+0x127/0x350 kernel/locking/lockdep.c:4488 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 printer_ioctl+0x4a/0x110 drivers/usb/gadget/function/f_printer.c:723 vfs_ioctl fs/ioctl.c:47 [inline] ksys_ioctl+0xfb/0x130 fs/ioctl.c:763 __do_sys_ioctl fs/ioctl.c:772 [inline] __se_sys_ioctl fs/ioctl.c:770 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4531a9 Code: ed 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fd14ad72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 00000000004531a9 RDX: fffffffffffffff9 RSI: 000000000000009e RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004bbd61 R13: 00000000004d0a98 R14: 00007fd14ad736d4 R15: 00000000ffffffff Allocated by task 2393: save_stack+0x21/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc.constprop.3+0xa7/0xd0 mm/kasan/common.c:515 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529 kmem_cache_alloc_trace+0xfa/0x2d0 mm/slub.c:2813 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] gprinter_alloc+0xa1/0x870 drivers/usb/gadget/function/f_printer.c:1416 usb_get_function+0x58/0xc0 drivers/usb/gadget/functions.c:61 config_usb_cfg_link+0x1ed/0x3e0 drivers/usb/gadget/configfs.c:444 configfs_symlink+0x527/0x11d0 fs/configfs/symlink.c:202 vfs_symlink+0x33d/0x5b0 fs/namei.c:4201 do_symlinkat+0x11b/0x1d0 fs/namei.c:4228 __do_sys_symlinkat fs/namei.c:4242 [inline] __se_sys_symlinkat fs/namei.c:4239 [inline] __x64_sys_symlinkat+0x73/0xb0 fs/namei.c:4239 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3368: save_stack+0x21/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:337 [inline] __kasan_slab_free+0x135/0x190 mm/kasan/common.c:476 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485 slab_free_hook mm/slub.c:1444 [inline] slab_free_freelist_hook mm/slub.c:1477 [inline] slab_free mm/slub.c:3034 [inline] kfree+0xf7/0x410 mm/slub.c:3995 gprinter_free+0x49/0xd0 drivers/usb/gadget/function/f_printer.c:1353 usb_put_function+0x38/0x50 drivers/usb/gadget/functions.c:87 config_usb_cfg_unlink+0x2db/0x3b0 drivers/usb/gadget/configfs.c:485 configfs_unlink+0x3b9/0x7f0 fs/configfs/symlink.c:250 vfs_unlink+0x287/0x570 fs/namei.c:4073 do_unlinkat+0x4f9/0x620 fs/namei.c:4137 __do_sys_unlink fs/namei.c:4184 [inline] __se_sys_unlink fs/namei.c:4182 [inline] __x64_sys_unlink+0x42/0x50 fs/namei.c:4182 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880683b0000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 24 bytes inside of 1024-byte region [ffff8880683b0000, ffff8880683b0400) The buggy address belongs to the page: page:ffffea0001a0ec00 refcount:1 mapcount:0 mapping:ffff88806c00e300 index:0xffff8880683b1800 compound_mapcount: 0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 0000000000000000 0000000600000001 ffff88806c00e300 raw: ffff8880683b1800 000000008010000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Reported-by:
Kyungtae Kim <kt0755@gmail.com> Signed-off-by:
Zqiang <qiang.zhang@windriver.com> Signed-off-by:
-
Florian Fainelli authored
The Broadcom BDC driver did not have a MAINTAINERS entry which made it escape review from Al and myself, add an entry so the relevant mailing lists and people are copied. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Michał Mirosław authored
Make debugging real problems easier by not trying to disable an EP that was not yet enabled. Reviewed-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Tao Ren authored
This is a follow-on patch for commit a23be4ed ("usb: gadget: aspeed: improve vhub port irq handling"): for_each_set_bit() is replaced with simple for() loop because for() loop runs faster on ASPEED BMC. Signed-off-by:
Tao Ren <rentao.bupt@gmail.com> Signed-off-by:
-
Felipe Balbi authored
no functional changes Signed-off-by: -
Felipe Balbi authored
no functional changes Signed-off-by: -
Felipe Balbi authored
no functional changes Signed-off-by: -
Felipe Balbi authored
no functional changes Signed-off-by: -
Felipe Balbi authored
no functional changes Signed-off-by: -
Felipe Balbi authored
no functional changes Signed-off-by: -
Felipe Balbi authored
no functional changes Signed-off-by: -
Felipe Balbi authored
no functional changes. Signed-off-by: -
Felipe Balbi authored
no functional changes. Signed-off-by: -
Felipe Balbi authored
Fix the following sparse warning: drivers/usb/dwc3/trace.c: note: in included file (through drivers/usb/dwc3/trace.h): drivers/usb/dwc3/debug.h:374:39: warning: cast to non-scalar Signed-off-by: -
Felipe Balbi authored
Coccinelle suggests using PTR_ERR_OR_ZERO(). Signed-off-by: -
Sandeep Maheswaram authored
Add interconnect support in dwc3-qcom driver to vote for bus bandwidth. This requires for two different paths - from USB to DDR. The other is from APPS to USB. Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by:
Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Signed-off-by:
-
Linus Walleij authored
The UDC NET2272 driver includes <linux/gpio.h> but does not use any symbols from this file, so drop the include. Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
