Fix the broken a.out format dump. For now we only dump the ptrace
breakpoints.

TODO: Dump every perf breakpoints for the current thread, not only
ptrace based ones.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

All of the infrastructure already exists to support read accesses
for platforms that support a read access independently of read/write
(such as in the case of the SuperH UBC). This just trivially hooks
up the read case by itself.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <20091109083733.GA25848@linux-sh.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

The macro used to be used in both trace_selftest.c and
trace_ksym.c, but no longer, so remove it from header file.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

Allow or refuse to build a counter using the breakpoints pmu following
given constraints.

We keep track of the pmu users by using three per cpu variables:

- nr_cpu_bp_pinned stores the number of pinned cpu breakpoints counters
  in the given cpu

- nr_bp_flexible stores the number of non-pinned breakpoints counters
  in the given cpu.

- task_bp_pinned stores the number of pinned task breakpoints in a cpu

The latter is not a simple counter but gathers the number of tasks that
have n pinned breakpoints.
Considering HBP_NUM the number of available breakpoint address
registers:
   task_bp_pinned[0] is the number of tasks having 1 breakpoint
   task_bp_pinned[1] is the number of tasks having 2 breakpoints
   [...]
   task_bp_pinned[HBP_NUM - 1] is the number of tasks having the
   maximum number of registers (HBP_NUM).

When a breakpoint counter is created and wants an access to the pmu,
we evaluate the following constraints:

== Non-pinned counter ==

- If attached to a single cpu, check:

    (per_cpu(nr_bp_flexible, cpu) || (per_cpu(nr_cpu_bp_pinned, cpu)
         + max(per_cpu(task_bp_pinned, cpu)))) < HBP_NUM

       -> If there are already non-pinned counters in this cpu, it
          means there is already a free slot for them.
          Otherwise, we check that the maximum number of per task
          breakpoints (for this cpu) plus the number of per cpu
          breakpoint (for this cpu) doesn't cover every registers.

- If attached to every cpus, check:

    (per_cpu(nr_bp_flexible, *) || (max(per_cpu(nr_cpu_bp_pinned, *))
           + max(per_cpu(task_bp_pinned, *)))) < HBP_NUM

       -> This is roughly the same, except we check the number of per
          cpu bp for every cpu and we keep the max one. Same for the
          per tasks breakpoints.

== Pinned counter ==

- If attached to a single cpu, check:

       ((per_cpu(nr_bp_flexible, cpu) > 1)
            + per_cpu(nr_cpu_bp_pinned, cpu)
            + max(per_cpu(task_bp_pinned, cpu))) < HBP_NUM

       -> Same checks as before. But now the nr_bp_flexible, if any,
          must keep one register at least (or flexible breakpoints will
          never be be fed).

- If attached to every cpus, check:

      ((per_cpu(nr_bp_flexible, *) > 1)
           + max(per_cpu(nr_cpu_bp_pinned, *))
           + max(per_cpu(task_bp_pinned, *))) < HBP_NUM

Changes in v2:

- Counter -> event rename

Changes in v5:

- Fix unreleased non-pinned task-bound-only counters. We only released
  it in the first cpu. (Thanks to Paul Mackerras for reporting that)

Changes in v6:

- Currently, events scheduling are done in this order: cpu context
  pinned + cpu context non-pinned + task context pinned + task context
  non-pinned events. Then our current constraints are right theoretically
  but not in practice, because non-pinned counters may be scheduled
  before we can apply every possible pinned counters. So consider
  non-pinned counters as pinned for now.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>

This patch rebase the implementation of the breakpoints API on top of
perf events instances.

Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..

The new layering is now made as follows:

       ptrace       kgdb      ftrace   perf syscall
          \          |          /         /
           \         |         /         /
                                        /
            Core breakpoint API        /
                                      /
                     |               /
                     |              /

              Breakpoints perf events

                     |
                     |

               Breakpoints PMU ---- Debug Register constraints handling
                                    (Part of core breakpoint API)
                     |
                     |

             Hardware debug registers

Reasons of this rewrite:

- Use the centralized/optimized pmu registers scheduling,
  implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
  events, exclusive/non-exclusive, tunable period, etc...)

Impact:

- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
  thread breakpoints references.

Todo (in the order):

- Support breakpoints perf counter events for perf tools (ie: implement
  perf_bpcounter_event())
- Support from perf tools

Changes in v2:

- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
  weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
  perf_event_attr.
- Separate core and arch specific headers, drop
  asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch

Changes in v3:

- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
  changes to kvm when we exit the guest and restore the bp registers
  to the host.

Changes in v4:

- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
  module
- Restore the breakpoints unconditionally on kvm guest exit:
  TIF_DEBUG_THREAD doesn't anymore cover every cases of running
  breakpoints and vcpu->arch.switch_db_regs might not always be
  set when the guest used debug registers.
  (Waiting for a reliable optimization)

Changes in v5:

- Split-up the asm-generic/hw-breakpoint.h moving to
  linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
  to host. We only want to restore the state if we have active
  breakpoints to the host, otherwise we don't care about messed-up
  address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c

Changes in v6:

- Fix wrong header inclusion in trace.h (triggered a build
  error with CONFIG_FTRACE_SELFTEST
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>

We plan to make the breakpoints parameters generic among architectures.
For that it's better to move the asm-generic header to a generic linux
header.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

A simple callback in a perf event can be used for multiple purposes.
For example it is useful for triggered based events like hardware
breakpoints that need a callback to dispatch a triggered breakpoint
event.

v2: Simplify a bit the callback attribution as suggested by Paul
    Mackerras
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>

flush_thread() tries to do a TIF_DEBUG check before calling in to
flush_thread_hw_breakpoint() (which subsequently clears the thread flag),
but for some reason, the x86 code is manually clearing TIF_DEBUG
immediately before the test, so this path will never be taken.

This kills off the erroneous clear_tsk_thread_flag() and lets
flush_thread_hw_breakpoint() actually get invoked.

Presumably folks were getting lucky with testing and the
free_thread_info() -> free_thread_xstate() path was taking care of the
flush there.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alan Stern <stern@rowland.harvard.edu>
LKML-Reference: <20091005102306.GA7889@linux-sh.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

There are reasons for kernel code to ask for, and use, performance
counters.
For example, in CPU freq governors this tends to be a good idea, but
there are other examples possible as well of course.

This patch adds the needed bits to do enable this functionality; they
have been tested in an experimental cpufreq driver that I'm working on,
and the changes are all that I needed to access counters properly.

[fweisbec@gmail.com: added pid to perf_event_create_kernel_counter so
that we can profile a particular task too

TODO: Have a better error reporting, don't just return NULL in fail
case.]

v2: Remove the wrong comment about the fact
    perf_event_create_kernel_counter must be called from a kernel
    thread.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Avi Kivity <avi@redhat.com>
LKML-Reference: <20090925122556.2f8bd939@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

Conflicts:
	kernel/Makefile
	kernel/trace/Makefile
	kernel/trace/trace.h
	samples/Makefile

Merge reason: We need to be uptodate with the perf events development
branch because we plan to rewrite the breakpoints API on top of
perf events.

In each case, if the NULL test on thread is needed, then the
dereference should be after the NULL test.

A simplified version of the semantic match that detects this
problem is as follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
LKML-Reference: <Pine.LNX.4.64.0910170842500.9213@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.

The primary way to see which fields are available is by looking
at the trace output, such as:

  gcc-18676 [000]   343.011728: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.012727: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.032692: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.033690: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.034687: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.035686: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.036684: irq_handler_entry: irq=0 handler=timer

While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:

  $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
   Error: failed to set filter with 22 (Invalid argument)

The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.

To solve this, we need to synchronize the printout and the field
names, wherever possible.

In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:

  perf-1380  [013]   724.903505: softirq_exit: vec=9 [action=RCU]
  perf-1380  [013]   724.904482: softirq_exit: vec=1 [action=TIMER]

This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.

This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.

We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Américo Wang noticed that we have a locking imbalance in the
error paths of ftrace_profile_set_filter(), causing potential
leakage of event_mutex.

Also clean up other error codepaths related to event_mutex
while at it.

Plus fix an initialized variable in the subsystem filter code.
Reported-by: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <2375c9f90910150247u5ccb8e2at58c764e385ffa490@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add a new option "--filter <filter_str>" to perf record, and
it should be right after "-e trace_point":

 #./perf record -R -f -e irq:irq_handler_entry --filter irq==18
 ^C
 # ./perf trace
            perf-4303  ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0

See Documentation/trace/events.txt for the syntax of filter
expressions.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD6955F.90602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

- Add an ioctl to allocate a filter for a perf event.

- Free the filter when the associated perf event is to be freed.

- Do the filtering in perf_swevent_match().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69546.8050401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

"==" will always do a full match, and "~" will do a glob match.

In the future, we may add "=~" for regex match.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69528.3050309@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Change:
	for_each_pred
		for_each_subsystem
To:
	for_each_subsystem
		for_each_pred

This change also prepares for later patches.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69502.8060903@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: to add event filter support we need the following
commits from the tracing tree:

 3f6fe06d: tracing/filters: Unify the regex parsing helpers
 1889d209: tracing/filters: Provide basic regex support
 737f453f: tracing/filters: Cleanup useless headers
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The (char *) for all the static strings was a fix for the
symptom and not the disease. The real issue was that the
function prototypes needed to be declared "const char *".
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.635935008@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The opterators '-' and '+' are not handled in the trace print
format.

To do: '++' and '--'.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.330843045@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add the irqs disabled, preemption count, need resched, and other
info that is shown in the latency format of ftrace.

 # perf trace -l
    perf-16457   2..s2. 53636.260344: kmem_cache_free: call_site=ffffffff811198f
    perf-16457   2..s2. 53636.264330: kmem_cache_free: call_site=ffffffff811198f
    perf-16457   2d.s4. 53636.300006: kmem_cache_free: call_site=ffffffff810d889
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.076588953@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The ftrace output events can have either arguments or no
arguments. The parser needs to be able to handle both.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.790221427@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The bprintk parsing was broken in more ways than one.

The file parsing was incorrect, and the words used by the
arguments are always 4 bytes aligned, even on 64-bit machines.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.520931637@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Even though an event may fail to parse, we should not kill the
entire report. The trace should still be able to show what it
can.

If an event fails to parse, a warning is printed, and the output
continues.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.190809589@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The trace format files now have a "signed" field. But we should
still be able to handle the kernels that do not have this field.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.888239553@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

New lines between args in the trace format can break the
parsing. This should not be the case.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.637991808@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The '*' is currently only treated as a multiplication, and it
needs to be handled as a typecast pointer.

This is the version used by trace-cmd.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.409327875@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The array used by the ftrace stack events (caller[x]) causes
issues with the parser. This adds code to handle the case, but
it also assumes that the array is of type long.

Note, this is a special case used (currently) only by the ftrace
user and kernel stack records.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.124833639@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The code to handle the '<' and '>' ops was all in place, but
they were not in the switch statement to consider them as valid
ops.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.807434040@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The handling of backslashes was broken. It would stop parsing
when encountering one. Also, '\n', '\t', '\r' and '\\' were not
converted.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.521974680@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kmem_alloc ftrace event format had a string that was broken up
by two tokens. "string 1" "string 2". This patch lets the parser
be able to handle the concatenation.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.253818714@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: pick up tools/perf/ changes from upstream.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
  ieee1394: add documentation entry to MAINTAINERS
  ieee1394: update URLs in debugging-via-ohci1394.txt

* branch 'tty-fixes':
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  Make flush_to_ldisc properly handle parallel calls

Merge branch 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland

* 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: linker script syntax nits

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  watchdog: Fix rio watchdog probe function
  sparc64: Set IRQF_DISABLED on LDC channel IRQs.
  sparc64: Fix D-cache flushing on swapin from SW devices.
  sparc64: Fix niagara2 perf IRQ bits.

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] sclp_vt220 build fix
  [S390] cio: change misleading console logic
  [S390] call home support: fix proc handler
  [S390] dasd: use idal for device characteristics
  [S390] Add highgprs facility to /proc/cpuinfo
  [S390] dasd: fix locking bug
  [S390] tape390: Fix request queue handling in block driver
  [S390] hypfs: Use subcode 6 if subcode 7 is not available

* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix a TRACE_IRQS_OFF typo.
  sh: Optimize the setup_rt_frame() I-cache flush.
  sh: Populate initial secondary CPU info from boot_cpu_data.
  sh: Tidy up SMP cpuinfo.
  sh: Use boot_cpu_data for FPU tests in sigcontext paths.
  sh: ftrace: Fix up syscall tracepoint support.
  sh: force dcache flush if dcache_dirty bit set.
  sh: update die() output.

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  oprofile: warn on freeing event buffer too early
  oprofile: fix race condition in event_buffer free
  lockdep: Use cpu_clock() for lockstat

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf events: Update MAINTAINERS entry file patterns
  perf tools: Remove static debugfs path from parse-events
  perf tools: Fix the NO_64BIT build on pure 64-bit systems
  perf tools: Fix const char type propagation