- 06 Aug, 2018 40 commits
-
-
Lu Fengqi authored
It can be fetched from the transaction handle. Signed-off-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Lu Fengqi authored
They can be fetched from the transaction handle. Signed-off-by:
-
Lu Fengqi authored
It can be fetched from the transaction handle. Signed-off-by:
-
Lu Fengqi authored
It can be fetched from the transaction handle. Signed-off-by:
-
Lu Fengqi authored
It can be fetched from the transaction handle. Signed-off-by:
-
Lu Fengqi authored
It can be fetched from the transaction handle. Signed-off-by:
-
Lu Fengqi authored
It can be fetched from the transaction handle. Signed-off-by:
-
Anand Jain authored
Rename btrfs_parse_early_options() to btrfs_parse_device_options(). As btrfs_parse_early_options() parses the -o device options and scan the device provided. So this rename specifies its action. Also the function name is in line with btrfs_parse_subvol_options(). No functional changes. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Lu Fengqi authored
Since commit 0b246afa ("btrfs: root->fs_info cleanup, add fs_info convenience variables"), the srcroot is no longer used to get fs_info::nodesize. In fact, it can be dropped after commit 707e8a07 ("btrfs: use nodesize everywhere, kill leafsize"). Signed-off-by:
-
Qu Wenruo authored
Introduce a small helper, btrfs_mark_bg_unused(), to acquire locks and add a block group to unused_bgs list. No functional modification, and only 3 callers are involved. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Nikolay Borisov authored
do_chunk_alloc implements logic to detect whether there is currently pending chunk allocation (by means of space_info->chunk_alloc being set) and if so it loops around to the 'again' label. Additionally, based on the state of the space_info (e.g. whether it's full or not) and the return value of should_alloc_chunk() it decides whether this is a "hard" error (ENOSPC) or we can just return 0. This patch refactors all of this: 1. Put order to the scattered ifs handling the various cases in an easy-to-read if {} else if{} branches. This makes clear the various cases we are interested in handling. 2. Call should_alloc_chunk only once and use the result in the if/else if constructs. All of this is done under space_info->lock, so even before multiple calls of should_alloc_chunk were unnecessary. 3. Rewrite the "do {} while()" loop currently implemented via label into an explicit loop construct. 4. Move the mutex locking for the case where the caller is the one doing the allocation. For the case where the caller needs to wait a concurrent allocation, introduce a pair of mutex_lock/mutex_unlock to act as a barrier and reword the comment. 5. Switch local vars to bool type where pertinent. All in all this shouldn't introduce any functional changes. Signed-off-by: -
Ethan Lien authored
In commit b150a4f1 ("Btrfs: use a percpu to keep track of possibly pinned bytes") we use total_bytes_pinned to track how many bytes we are going to free in this transaction. When we are close to ENOSPC, we check it and know if we can make the allocation by commit the current transaction. For every data/metadata extent we are going to free, we add total_bytes_pinned in btrfs_free_extent() and btrfs_free_tree_block(), and release it in unpin_extent_range() when we finish the transaction. So this is a variable we frequently update but rarely read - just the suitable use of percpu_counter. But in previous commit we update total_bytes_pinned by default 32 batch size, making every update essentially a spin lock protected update. Since every spin lock/unlock operation involves syncing a globally used variable and some kind of barrier in a SMP system, this is more expensive than using total_bytes_pinned as a simple atomic64_t. So fix this by using a customized batch size. Since we only read total_bytes_pinned when we are close to ENOSPC and fail to allocate new chunk, we can use a really large batch size and have nearly no penalty in most cases. [Test] We tested the patch on a 4-cores x86 machine: 1. fallocate a 16GiB size test file 2. take snapshot (so all following writes will be COW) 3. run a 180 sec, 4 jobs, 4K random write fio on test file We also added a temporary lockdep class on percpu_counter's spin lock used by total_bytes_pinned to track it by lock_stat. [Results] unpatched: lock_stat version 0.4 ----------------------------------------------------------------------- class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg total_bytes_pinned_percpu: 82 82 0.21 0.61 29.46 0.36 298340 635973 0.09 11.01 173476.25 0.27 patched: lock_stat version 0.4 ----------------------------------------------------------------------- class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg total_bytes_pinned_percpu: 1 1 0.62 0.62 0.62 0.62 13601 31542 0.14 9.61 11016.90 0.35 [Analysis] Since the spin lock only protects a single in-memory variable, the contentions (number of lock acquisitions that had to wait) in both unpatched and patched version are low. But when we see acquisitions and acq-bounces, we get much lower counts in patched version. Here the most important metric is acq-bounces. It means how many times the lock gets transferred between different cpus, so the patch can really reduce cacheline bouncing of spin lock (also the global counter of percpu_counter) in a SMP system. Fixes: b150a4f1 ("Btrfs: use a percpu to keep track of possibly pinned bytes") Signed-off-by:
Ethan Lien <ethanlien@synology.com> Reviewed-by:
-
Ethan Lien authored
We use customized, nodesize batch value to update dirty_metadata_bytes. We should also use batch version of compare function or we will easily goto fast path and get false result from percpu_counter_compare(). Fixes: e2d84521 ("Btrfs: use percpu counter for dirty metadata count") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Gu Jinxiang authored
Return device pointer (with the IS_ERR semantics) from btrfs_scan_one_device so we don't have to return in through pointer. And since btrfs_fs_devices can be obtained from btrfs_device, return that. Signed-off-by:
Gu Jinxiang <gujx@cn.fujitsu.com> Reviewed-by:
-
Gu Jinxiang authored
fs_devices is always passed to btrfs_scan_one_device which overrides it. In the call stack below fs_devices is passed to btrfs_scan_one_device from btrfs_mount_root. In btrfs_mount_root the output fs_devices of this call stack is not used. btrfs_mount_root btrfs_parse_early_options btrfs_scan_one_device So, it is not necessary to pass fs_devices from btrfs_mount_root, using a local variable in btrfs_parse_early_options is enough. Signed-off-by: -
David Sterba authored
Technically this extends the critical section covered by uuid_mutex to: - parse early mount options -- here we can call device scan on paths that can be passed as 'device=/dev/...' - scan the device passed to mount - open the devices related to the fs_devices -- this increases fs_devices::opened The race can happen when mount calls one of the scans and there's another one called eg. by mkfs or 'btrfs dev scan': Mount Scan ----- ---- scan_one_device (dev1, fsid1) scan_one_device (dev2, fsid1) add the device free stale devices fsid1 fs_devices::opened == 0 find fsid1:dev1 free fsid1:dev1 if it's the last one, free fs_devices of fsid1 too open_devices (dev1, fsid1) dev1 not found When fixed, the uuid mutex will make sure that mount will increase fs_devices::opened and this will not be touched by the racing scan ioctl. Reported-and-tested-by: syzbot+909a5177749d7990ffa4@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+ceb2606025ec1cc3479c@syzkaller.appspotmail.com Reviewed-by: -
David Sterba authored
In preparation to take a big lock, move resource initialization before the critical section. It's not obvious from the diff, the desired order is: - initialize mount security options - allocate temporary fs_info - allocate superblock buffers Reviewed-by:
-
David Sterba authored
Prepartory work to fix race between mount and device scan. btrfs_parse_early_options calls the device scan from mount and we'll need to let mount completely manage the critical section. Reviewed-by:
-
David Sterba authored
Prepartory work to fix race between mount and device scan. The callers will have to manage the critical section, eg. mount wants to scan and then call btrfs_open_devices without the ioctl scan walking in and modifying the fs devices in the meantime. Reviewed-by:
-
David Sterba authored
Prepartory work to fix race between mount and device scan. The callers will have to manage the critical section, eg. mount wants to scan and then call btrfs_open_devices without the ioctl scan walking in and modifying the fs devices in the meantime. Reviewed-by:
-
Anand Jain authored
btrfs_free_stale_devices() finds a stale (not opened) device matching path in the fs_uuid list. We are already under uuid_mutex so when we check for each fs_devices, hold the device_list_mutex too. Signed-off-by:
-
Anand Jain authored
Over the years we named %fs_devices and %devices to represent the struct btrfs_fs_devices and the struct btrfs_device. So follow the same scheme here too. No functional changes. Signed-off-by:
-
Anand Jain authored
Make sure the device_list_lock is held the whole time: * when the device is being looked up * new device is initialized and put to the list * the list counters are updated (fs_devices::opened, fs_devices::total_devices) Signed-off-by:
-
Anand Jain authored
btrfs_free_stale_devices() looks for device path reused for another filesystem, and deletes the older fs_devices::device entry. In preparation to handle locking in device_list_add, move btrfs_free_stale_devices outside as these two functions serve a different purpose. Signed-off-by:
-
Nikolay Borisov authored
Since commit 88c14590 ("btrfs: use RCU in btrfs_show_devname for device list traversal") btrfs_show_devname no longer takes device_list_mutex. As such the deadlock that 0ccd0528 ("btrfs: fix a possible umount deadlock") aimed to fix no longer exists, we can free the devices immediatelly and remove the code that does the pending work. Signed-off-by:
-
Qu Wenruo authored
This function is not used since the alloc_start parameter has been obsoleted in commit 0d0c71b3 ("btrfs: obsolete and remove mount option alloc_start"). Signed-off-by:
-
Gu Jinxiang authored
Since parameter flags is no more used since commit d7407606 ("btrfs: split parse_early_options() in two"), remove it. Signed-off-by:
-
Anand Jain authored
In case of deleting the seed device the %cur_devices (seed) and the %fs_devices (parent) are different. Now, as the parent fs_devices::total_devices also maintains the total number of devices including the seed device, so decrement its in-memory value for the successful seed delete. We are already updating its corresponding on-disk btrfs_super_block::number_devices value. Signed-off-by:
-
Nikolay Borisov authored
Commit 5d23515b ("btrfs: Move qgroup rescan on quota enable to btrfs_quota_enable") not only resulted in an easier to follow code but it also introduced a subtle bug. It changed the timing when the initial transaction rescan was happening: - before the commit: it would happen after transaction commit had occured - after the commit: it might happen before the transaction was committed This results in failure to correctly rescan the quota since there could be data which is still not committed on disk. This patch aims to fix this by moving the transaction creation/commit inside btrfs_quota_enable, which allows to schedule the quota commit after the transaction has been committed. Fixes: 5d23515b ("btrfs: Move qgroup rescan on quota enable to btrfs_quota_enable") Reported-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Link: https://marc.info/?l=linux-btrfs&m=152999289017582Signed-off-by:
-
David Sterba authored
Add fall-back code to catch failure of full_stripe_write. Proper error handling from inside run_plug would need more code restructuring as it's called at arbitrary points by io scheduler. Signed-off-by: -
David Sterba authored
There's only one call site of the unlocked helper so it can be folded into the caller. Signed-off-by: -
David Sterba authored
Signed-off-by: -
David Sterba authored
Signed-off-by: -
David Sterba authored
Signed-off-by: -
David Sterba authored
Add helper that schedules a given function to run on the rmw workqueue. This will replace several standalone helpers. Signed-off-by: -
David Sterba authored
The helper is trivial and marked as deprecated. Signed-off-by: -
David Sterba authored
The loops iterating eb pages use unsigned long, that's an overkill as we know that there are at most 16 pages (64k / 4k), and 4 by default (with nodesize 16k). Reviewed-by:
-
David Sterba authored
Reviewed-by:
-
David Sterba authored
Almost all callers pass the start and len as 2 arguments but this is not necessary, all the information is provided by the eb. By reordering the calls to num_extent_pages, we don't need the local variables with start/len. Reviewed-by:
-
David Sterba authored
Remove includes if none of the interfaces and exports is used in the given source file. Signed-off-by:
-
