- 30 Jul, 2012 4 commits
-
-
Oleg Nesterov authored
The comment above write_opcode()->lock_page(old_page) tells about the race with do_wp_page(). I don't really understand which exactly race it means, but afaics this lock_page() was not enough to close all races with do_wp_page(). Anyway, since: 77fc4af1 uprobes: Change register_for_each_vma() to take mm->mmap_sem for writing this code is always called with ->mmap_sem held for writing, so we can forget about do_wp_page(). However, we can't simply remove this lock_page(), and the only (afaics) reason is __replace_page()->try_to_free_swap(). Nothing in write_opcode() needs it, move it into __replace_page() and fix the comment. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182220.GA20322@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Oleg Nesterov authored
write_opcode() does lock_page(new_page) for no reason. Nobody can see this page until __replace_page() exposes it under ptl lock, and we do nothing with this page after pte_unmap_unlock(). If nothing else, the similar code in do_wp_page() doesn't lock the new page for page_add_new_anon_rmap/set_pte_at_notify. Signed-off-by:
-
Oleg Nesterov authored
page_address_in_vma(old_page) in __replace_page() is ugly and wrong. The caller already knows the correct virtual address, this page was found by get_user_pages(vaddr). However, page_address_in_vma() can actually fail if page->mapping was cleared by __delete_from_page_cache() after get_user_pages() returns. But this means the race with page reclaim, write_opcode() should not fail, it should retry and read this page again. Probably the race with remove_mapping() is not possible due to page_freeze_refs() logic, but afaics at least shmem_writepage()->shmem_delete_from_page_cache() can clear ->mapping. We could change __replace_page() to return -EAGAIN in this case, but it would be better to simply use the caller's vaddr and rely on page_check_address(). Signed-off-by:
-
Oleg Nesterov authored
write_opcode() rechecks valid_vma() and ->f_mapping, this is pointless. The caller, register_for_each_vma() or uprobe_mmap(), has already done these checks under mmap_sem. To clarify, uprobe_mmap() checks valid_vma() only, but we can rely on build_probe_list(vm_file->f_mapping->host). Signed-off-by:
-
- 26 Jul, 2012 7 commits
-
-
Jovi Zhang authored
When CONFIG_PERF_EVENTS disabled, there will have a compiliation error, because missing struct before structure name. Signed-off-by:
Jovi Zhang <bookjovi@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jiri Kosina <trivial@kernel.org> Link: http://lkml.kernel.org/r/CACV3sbKF%3DCX%2B2jWEWesfCA6rBoQ3wDM4-5ac9MuBtVbCtMRHdQ@mail.gmail.comSigned-off-by:
-
Yan, Zheng authored
The event control register of SNB-EP uncore QPI box has a one bit extension at bit position 21. Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1343097850-4348-1-git-send-email-zheng.z.yan@intel.comSigned-off-by:
-
Peter Zijlstra authored
Fix: arch/x86/kernel/cpu/perf_event.h:377:43: sparse: dubious one-bit signed bitfield Cc: Borislav Petkov <bp@amd64.org> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Yan, Zheng authored
LLC-* and node-* events require using the OFFCORE_RESPONSE events on SandyBridge, but the hw_cache_extra_regs is left uninitialized. This patch adds the missing extra register configure table for SandyBridge. Signed-off-by:
-
Yan, Zheng authored
The uncore subsystem in Nehalem-EX consists of 7 components (U-Box, C-Box, B-Box, S-Box, R-Box, M-Box and W-Box). This patch is large because the way to program these boxes is diverse. Signed-off-by:
-
Yan, Zheng authored
The format definition of uncore PCU filter should be filter_band* instead of filter_brand*. Reported-by:
-
Andrew Vagin authored
Otherwise they can't be filtered for a defined task: perf record -e sched:sched_switch ./foo This command doesn't report any events without this patch. I think it isn't a security concern if someone knows who will be executed next - this can already be observed by polling /proc state. By default perf is disabled for non-root users in any case. I need these events for profiling sleep times. sched_switch is used for getting callchains and sched_stat_* is used for getting time periods. These events are combined in user space, then it can be analyzed by perf tools. Signed-off-by:
Andrew Vagin <avagin@openvz.org> Signed-off-by:
-
- 25 Jul, 2012 19 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo: * libtraceevent build fixes from Namhyung Kim * Prevent overflow when calculating annotation buckets size, from Cody Schafer * Set breakpoint events sample period to 1, just like trace events, from Jovi Zhang * Fix strerror_r usage, from Kirill Shutemov * Fix duplicate function declaration problems with bison 2.6, from Kirill Shutemov * Add DSO caching facility (and perf test entry) to speed up binary file reading, will be used by the DWARF unwind code, from Jiri Olsa * Fix trace event storms by setting PERF_SAMPLE_PERIOD, from Frederic Weisbecker * perf kvm fixes from David Ahern Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Cody Schafer authored
A large enough symbol size causes an overflow in the size parameter to the histogram allocation, leading to a segfault in symbol__inc_addr_samples later on when this histogram is accessed. In the case of being called via perf-report, this returns back and gracefully ignores the sample, eventually ignoring the chained return value of perf_session_deliver_event in flush_sample_queue. Signed-off-by:
Cody Schafer <cody@linux.vnet.ibm.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1342753525-4521-1-git-send-email-cody@linux.vnet.ibm.comSigned-off-by:
-
Namhyung Kim authored
The TRACEEVENT-CFLAGS file is used to detect any change on compiler flags. Just ignore it. Signed-off-by:
-
Namhyung Kim authored
Cross compiling perf requires setting ARCH and CROSS_COMPILE variables, but libtraceevent couldn't detect the changes so it ends up believing no recompiling is required. Thus the linker failed like: LINK perf ../lib/traceevent//libtraceevent.a: member ../lib/traceevent//libtraceevent.a(event-parse.o) in archive is not an object collect2: ld returned 1 exit status make: *** [perf] Error 1 This patch fixes this by adding TRACEEVENT-CFLAGS file like PERF-CFLAGS to track those changes. Signed-off-by: -
Kirill A. Shutemov authored
Bison 2.6 started to generate parse_events_parse() declaration in header. In this case we have redundant redeclaration: util/parse-events.c:29:5: error: redundant redeclaration of ‘parse_events_parse’ [-Werror=redundant-decls] In file included from util/parse-events.c:14:0: util/parse-events-bison.h:99:5: note: previous declaration of ‘parse_events_parse’ was here cc1: all warnings being treated as errors Let's disable -Wredundant-decls for util/parse-events.c since it includes header we can't control. Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120723210407.GA25186@shutemov.nameSigned-off-by:
-
Kirill A. Shutemov authored
Perf uses GNU-specific version of strerror_r(). The GNU-specific strerror_r() returns a pointer to a string containing the error message. This may be either a pointer to a string that the function stores in buf, or a pointer to some (immutable) static string (in which case buf is unused). In glibc-2.16 GNU version was marked with attribute warn_unused_result. It triggers few warnings in perf: util/target.c: In function ‘perf_target__strerror’: util/target.c:114:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result] ui/browsers/hists.c: In function ‘hist_browser__dump’: ui/browsers/hists.c:981:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result] They are bugs. Let's fix strerror_r() usage. Signed-off-by:
Ulrich Drepper <drepper@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/20120723210654.GA25248@shutemov.name [ committer note: s/assert/BUG_ON/g ] Signed-off-by:
-
Jovi Zhang authored
There have one problem about hw_breakpoint perf event, as watched, the events reported to userspace is not correctly, sometime one trigger bp_event report several events, sometime bp_event cannot go through to user. The root cause is attr->freq is 1 passed to kernel defaultly in bp events, this make kernel calculate event period not as expect, make sample period to 1 will change attr->freq to 0, to fix this problem. This patch is similar with commit f92128 about tracepoint events: perf: Make the trace events sample period default to 1 Signed-off-by: -
Jiri Olsa authored
Adding automated test for DSO data reading. Testing raw/cached reads from different file/cache locations. Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1342959280-5361-18-git-send-email-jolsa@redhat.comSigned-off-by:
-
Jiri Olsa authored
Adding dso data caching so we don't need to open/read/close, each time we want dso data. The DSO data caching affects following functions: dso__data_read_offset dso__data_read_addr Each DSO read tries to find the data (based on offset) inside the cache. If it's not present it fills the cache from file, and returns the data. If it is present, data are returned with no file read. Each data read is cached by reading cache page sized/aligned amount of DSO data. The cache page size is hardcoded to 4096. The cache is using RB tree with file offset as a sort key. Signed-off-by:
-
Jiri Olsa authored
Adding following interface for DSO object to allow reading of DSO image data: dso__data_fd - opens DSO and returns file descriptor Binary types are used to locate/open DSO in following order: DSO_BINARY_TYPE__BUILD_ID_CACHE DSO_BINARY_TYPE__SYSTEM_PATH_DSO In other word we first try to open DSO build-id path, and if that fails we try to open DSO system path. dso__data_read_offset - reads DSO data from specified offset dso__data_read_addr - reads DSO data from specified address/map. Signed-off-by: -
Jiri Olsa authored
Adding interface to access DSOs so it could be used from another place. New DSO binary type is added - making current SYMTAB__* types more general: DSO_BINARY_TYPE__* = SYMTAB__* Following function is added to return path based on the specified binary type: dso__binary_type_file Signed-off-by:
-
Frederic Weisbecker authored
Tiny cosmetic fix. The lack of a newline between hists callchains was looking slightly messy. Before: 0.24% swapper [kernel.kallsyms] [k] _raw_spin_lock_irq | --- _raw_spin_lock_irq run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt default_idle amd_e400_idle cpu_idle start_secondary 0.10% perf [kernel.kallsyms] [k] lock_is_held | --- lock_is_held __might_sleep mutex_lock_nested perf_event_for_each_child perf_ioctl do_vfs_ioctl sys_ioctl system_call_fastpath ioctl cmd_record run_builtin main __libc_start_main After: 0.24% swapper [kernel.kallsyms] [k] _raw_spin_lock_irq | --- _raw_spin_lock_irq run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt default_idle amd_e400_idle cpu_idle start_secondary 0.10% perf [kernel.kallsyms] [k] lock_is_held | --- lock_is_held __might_sleep mutex_lock_nested perf_event_for_each_child perf_ioctl do_vfs_ioctl sys_ioctl system_call_fastpath ioctl cmd_record run_builtin main __libc_start_main Signed-off-by:Frederic Weisbecker <fweisbec@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342631456-7233-3-git-send-email-fweisbec@gmail.comSigned-off-by:
-
Frederic Weisbecker authored
Trace events have a period (weight) of 1 by default. This can be overriden on events definition by using the __perf_count() macro. For example, the sched_stat_runtime() is weighted with the runtime of the task that fired the event. By default, perf handles such weighted event by dividing it into individual events carrying a weight of 1. For example if sched_stat_runtime is fired and the task has run 5000000 nsecs, perf divides it into 5000000 events in the buffer. This behaviour makes weighted events unusable because they quickly fullfill the buffers and we lose most events. The commit 5d81e5cf ("events: Don't divide events if it has field period") solves this problem by sending only one event when PERF_SAMPLE_PERIOD flag is set. The weight is carried in the sample itself such that we don't need to demultiplex it anymore. This patch provides the last missing piece to use this feature by setting PERF_SAMPLE_PERIOD from perf tools when we deal with trace events. Before: $ ./perf record -e sched:* -a sleep 1 [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.619 MB perf.data (~70749 samples) ] Warning: Processed 16909 events and lost 1 chunks! Check IO/CPU overload! $ ./perf script perf 1894 [003] 824.898327: sched_migrate_task: comm=perf pid=1898 prio=120 orig_cpu=2 dest_cpu=0 perf 1894 [003] 824.898335: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898336: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898337: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898338: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898339: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898340: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898341: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] [...] After: $ ./perf record -e sched:* -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.074 MB perf.data (~3228 samples) ] $ ./perf script perf 1461 [000] 554.286957: sched_migrate_task: comm=perf pid=1465 prio=120 orig_cpu=3 dest_cpu=1 perf 1461 [000] 554.286964: sched_stat_sleep: comm=perf pid=1465 delay=133047190 [ns] perf 1461 [000] 554.286967: sched_wakeup: comm=perf pid=1465 prio=120 success=1 target_cpu=001 swapper 0 [001] 554.286976: sched_stat_wait: comm=perf pid=1465 delay=0 [ns] swapper 0 [001] 554.286983: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=perf [...] Signed-off-by:
-
Frederic Weisbecker authored
Include the omitted number of characters printed for the first entry. Not that it really matters because nobody seem to care about the number of printed characters for now. But just in case. Signed-off-by:
-
David Ahern authored
Adds the attributes to the event line in the header dump. From: event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, ... to event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, excl_host = 0, excl_guest = 0, precise_ip = 0, ... Signed-off-by:David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1342826756-64663-8-git-send-email-dsahern@gmail.comSigned-off-by:
-
David Ahern authored
After 7ed97ad4 use of the guestmount option without a subdir for *each* VM generates an error message for each sample related to that VM. Once per VM is enough. Signed-off-by:
-
David Ahern authored
Guest kernel symbols are not resolved despite passing the information needed to resolve them. e.g., perf kvm --guest --guestmount=/tmp/guest-mount record -a -- sleep 1 perf kvm --guest --guestmount=/tmp/guest-mount report --stdio 36.55% [guest/11399] [unknown] [g] 0xffffffff81600bc8 33.19% [guest/10474] [unknown] [g] 0x00000000c0116e00 30.26% [guest/11094] [unknown] [g] 0xffffffff8100a288 43.69% [guest/10474] [unknown] [g] 0x00000000c0103d90 37.38% [guest/11399] [unknown] [g] 0xffffffff81600bc8 12.24% [guest/11094] [unknown] [g] 0xffffffff810aa91d 6.69% [guest/11094] [unknown] [u] 0x00007fa784d721c3 which is just pathetic. After a maddening 2 days sifting through perf minutia I found it -- id_hdr_size is not initialized for guest machines. This shows up on the report side as random garbage for the cpu and timestamp, e.g., 29816 7310572949125804849 0x1ac0 [0x50]: PERF_RECORD_MMAP ... That messes up the sample sorting such that synthesized guest maps are processed last. With this patch you get a much more helpful report: 12.11% [guest/11399] [guest.kernel.kallsyms.11399] [g] irqtime_account_process_tick 10.58% [guest/11399] [guest.kernel.kallsyms.11399] [g] run_timer_softirq 6.95% [guest/11094] [guest.kernel.kallsyms.11094] [g] printk_needs_cpu 6.50% [guest/11094] [guest.kernel.kallsyms.11094] [g] do_timer 6.45% [guest/11399] [guest.kernel.kallsyms.11399] [g] idle_balance 4.90% [guest/11094] [guest.kernel.kallsyms.11094] [g] native_read_tsc ... v2: - changed rbtree walk to use rb_first per Namhyung's suggestion Tested-by: -
David Ahern authored
e.g., perf kvm --host --guest report -i perf.data --stdio -D shows: 1 599127912065356 0x143b8 [0x48]: PERF_RECORD_SAMPLE(IP, 5): 5671/5676: 0x7fdf95a061c0 period: 1 addr: 0 ... chain: nr:2 ..... 0: ffffffffffffff80 ..... 1: fffffffffffffe00 ... thread: qemu-kvm:5671 ...... dso: <not found> (IP, 5) means sample in guest userspace. Those samples should not be lumped into the VMM's host thread. i.e, the report output: 56.86% qemu-kvm [unknown] [u] 0x00007fdf95a061c0 With this patch the output emphasizes it is a guest userspace hit: 56.86% [guest/5671] [unknown] [u] 0x00007fdf95a061c0 Looking at 3 VMs (2 64-bit, 1 32-bit) with each running a CPU bound process (openssl speed), perf report currently shows: 93.84% 117726 qemu-kvm [unknown] [u] 0x00007fd7dcaea8e5 which is wrong. With this patch you get: 31.50% 39258 [guest/18772] [unknown] [u] 0x00007fd7dcaea8e5 31.50% 39236 [guest/11230] [unknown] [u] 0x0000000000a57340 30.84% 39232 [guest/18395] [unknown] [u] 0x00007f66f641e107 Tested-by: -
David Ahern authored
COMM events are not generated in the context of a guest machine, so the thread name is never set for the VMM process. For example, the qemu-kvm name applies to the process in the host machine, not the guest machine. So, samples for guest machines are currently displayed as: 99.67% :5671 [unknown] [g] 0xffffffff81366b41 where 5671 is the pid of the VMM. With this patch the samples in the guest machine are shown as: 18.43% [guest/5671] [unknown] [g] 0xffffffff810d68b7 Tested-by:
-
- 23 Jul, 2012 1 commit
-
-
David Ahern authored
Current debug message is: Problems creating module maps, continuing anyway... When running multiple VMs it would be nice to know which machine the message is referring to: $ perf kvm --guest --guestmount=/tmp/guest-mount record -av -- sleep 10 Problems creating module maps for guest 6613, continuing anyway... Signed-off-by:
-
- 22 Jul, 2012 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull a x86/build change from Ingo Molnar. This makes the default stack alignment on x86-64 be just 8, allowing for improved code generation (it can avoid some unnecessary extra alignment logic and use just pure push/pop sequences) and smaller stack frames. We can't generally do SSE with 16-byte alignment issues in the kernel anyway. * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, gcc: Use -mpreferred-stack-boundary=3 if supported
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/uv changes from Ingo Molnar: "UV2 BAU productization fixes. The BAU (Broadcast Assist Unit) is SGI's fancy out of line way on UV hardware to do TLB flushes, instead of the normal APIC IPI methods. The commits here fix / work around hangs in their latest hardware iteration (UV2). My understanding is that the main purpose of the out of line signalling channel is to improve scalability: the UV APIC hardware glue does not handle broadcasting to many CPUs very well, and this matters most for TLB shootdowns. [ I don't agree with all aspects of the current approach: in hindsight it would have been better to link the BAU at the IPI/APIC driver level instead of the TLB shootdown level, where TLB flushes are really just one of the uses of broadcast SMP messages. Doing that would improve scalability in some other ways and it would also remove a few uglies from the TLB path. It would also be nice to push more is_uv_system() tests into proper x86_init or x86_platform callbacks. Cliff? ]" * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/uv: Work around UV2 BAU hangs x86/uv: Implement UV BAU runtime enable and disable control via /proc/sgi_uv/ x86/uv: Fix the UV BAU destination timeout period -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/reboot changes from Ingo Molnar: "Now that the revampted x86 real-mode trampoline code is upstream and seems to be working well, we can extend the 64-bit reboot code to be as capable as the 32-bit one." * 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, reboot: Be more paranoid in 64-bit reboot=bios x86, reboot: Drop redundant write of reboot_mode x86-64, reboot: Allow reboot=bios and reboot-cpu override on x86-64
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 platform changes from Ingo Molnar: "This tree mostly involves various APIC driver cleanups/robustization, and vSMP motivated platform callback improvements/cleanups" Fix up trivial conflict due to printk cleanup right next to return value change. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) Revert "x86/early_printk: Replace obsolete simple_strtoul() usage with kstrtoint()" x86/apic/x2apic: Use multiple cluster members for the irq destination only with the explicit affinity x86/apic/x2apic: Limit the vector reservation to the user specified mask x86/apic: Optimize cpu traversal in __assign_irq_vector() using domain membership x86/vsmp: Fix vector_allocation_domain's return value irq/apic: Use config_enabled(CONFIG_SMP) checks to clean up irq_set_affinity() for UP x86/vsmp: Fix linker error when CONFIG_PROC_FS is not set x86/apic/es7000: Make apicid of a cluster (not CPU) from a cpumask x86/apic/es7000+summit: Always make valid apicid from a cpumask x86/apic/es7000+summit: Fix compile warning in cpu_mask_to_apicid() x86/apic: Fix ugly casting and branching in cpu_mask_to_apicid_and() x86/apic: Eliminate cpu_mask_to_apicid() operation x86/x2apic/cluster: Vector_allocation_domain() should return a value x86/apic/irq_remap: Silence a bogus pr_err() x86/vsmp: Ignore IOAPIC IRQ affinity if possible x86/apic: Make cpu_mask_to_apicid() operations check cpu_online_mask x86/apic: Make cpu_mask_to_apicid() operations return error code x86/apic: Avoid useless scanning thru a cpumask in assign_irq_vector() x86/apic: Try to spread IRQ vectors to different priority levels x86/apic: Factor out default vector_allocation_domain() operation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull debug-for-linus git tree from Ingo Molnar. Fix up trivial conflict in arch/x86/kernel/cpu/perf_event_intel.c due to a printk() having changed to a pr_info() differently in the two branches. * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Move call to print_modules() out of show_regs() x86/mm: Mark free_initrd_mem() as __init x86/microcode: Mark microcode_id[] as __initconst x86/nmi: Clean up register_nmi_handler() usage x86: Save cr2 in NMI in case NMIs take a page fault (for i386) x86: Remove cmpxchg from i386 NMI nesting code x86: Save cr2 in NMI in case NMIs take a page fault x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/asm changes from Ingo Molnar: "Assorted single-commit improvements, as usual" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/mtrr: Slightly simplify print_mtrr_state() x86/mm/mtrr: Fix alignment determination in range_to_mtrr() x86/copy_user_generic: Optimize copy_user_generic with CPU erms feature x86/alternatives: Use atomic_xchg() instead atomic_dec_and_test() for stop_machine_text_poke()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer core changes from Ingo Molnar: "Continued cleanups of the core time and NTP code, plus more nohz work preparing for tick-less userspace execution." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Rework timekeeping functions to take timekeeper ptr as argument time: Move xtime_nsec adjustment underflow handling timekeeping_adjust time: Move arch_gettimeoffset() usage into timekeeping_get_ns() time: Refactor accumulation of nsecs to secs time: Condense timekeeper.xtime into xtime_sec time: Explicitly use u32 instead of int for shift values time: Whitespace cleanups per Ingo%27s requests nohz: Move next idle expiry time record into idle logic area nohz: Move ts->idle_calls incrementation into strict idle logic nohz: Rename ts->idle_tick to ts->last_tick nohz: Make nohz API agnostic against idle ticks cputime accounting nohz: Separate idle sleeping time accounting from nohz logic timers: Improve get_next_timer_interrupt() timers: Add accounting of non deferrable timers timers: Consolidate base->next_timer update timers: Create detach_if_pending() and use it
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp/hotplug changes from Ingo Molnar: "Various cleanups to the SMP hotplug code - a continuing effort of Thomas et al" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smpboot: Remove leftover declaration smp: Remove num_booting_cpus() smp: Remove ipi_call_lock[_irq]()/ipi_call_unlock[_irq]() POWERPC: Smp: remove call to ipi_call_lock()/ipi_call_unlock() SPARC: SMP: Remove call to ipi_call_lock_irq()/ipi_call_unlock_irq() ia64: SMP: Remove call to ipi_call_lock_irq()/ipi_call_unlock_irq() x86-smp-remove-call-to-ipi_call_lock-ipi_call_unlock tile: SMP: Remove call to ipi_call_lock()/ipi_call_unlock() S390: Smp: remove call to ipi_call_lock()/ipi_call_unlock() parisc: Smp: remove call to ipi_call_lock()/ipi_call_unlock() mn10300: SMP: Remove call to ipi_call_lock()/ipi_call_unlock() hexagon: SMP: Remove call to ipi_call_lock()/ipi_call_unlock()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf events changes from Ingo Molnar: "- kernel side: - Intel uncore PMU support for Nehalem and Sandy Bridge CPUs, we support both the events available via the MSR and via the PCI access space. - various uprobes cleanups and restructurings - PMU driver quirks by microcode version and required x86 microcode loader cleanups/robustization - various tracing robustness updates - static keys: remove obsolete static_branch() - tooling side: - GTK browser improvements - perf report browser: support screenshots to file - more automated tests - perf kvm improvements - perf bench refinements - build environment improvements - pipe mode improvements - libtraceevent updates, we have now hopefully merged most bits with the out of tree forked code base ... and many other goodies." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (138 commits) tracing: Check for allocation failure in __tracing_open() perf/x86: Fix intel_perfmon_event_mapformatting jump label: Remove static_branch() tracepoint: Use static_key_false(), since static_branch() is deprecated perf/x86: Uncore filter support for SandyBridge-EP perf/x86: Detect number of instances of uncore CBox perf/x86: Fix event constraint for SandyBridge-EP C-Box perf/x86: Use 0xff as pseudo code for fixed uncore event perf/x86: Save a few bytes in 'struct x86_pmu' perf/x86: Add a microcode revision check for SNB-PEBS perf/x86: Improve debug output in check_hw_exists() perf/x86/amd: Unify AMD's generic and family 15h pmus perf/x86: Move Intel specific code to intel_pmu_init() perf/x86: Rename Intel specific macros perf/x86: Fix USER/KERNEL tagging of samples perf tools: Split event symbols arrays to hw and sw parts perf tools: Split out PE_VALUE_SYM parsing token to SW and HW tokens perf tools: Add empty rule for new line in event syntax parsing perf test: Use ARRAY_SIZE in parse events tests tools lib traceevent: Cleanup realloc use ...
-
