- 08 May, 2018 3 commits
-
-
Chris Wilson authored
When rescheduling a change of dependencies, they all need to be added to the same priolist (at least the ones on the same engine!). Since we likely want to move a batch of requests, keep the priolist around. v2: Throw in an assert to catch trivial errors quickly. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508003046.2633-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
lookup_priolist() no longer attaches the request into the priolist, it just returns the priolist for the given priority instead. Drop the unused parameter. Signed-off-by:
-
Chris Wilson authored
Unsafe module parameters are just that, unsafe. If the user is foolish enough to try them and the kernel breaks, they get to keep both pieces. Don't ask them to file a bug report if they broke it themselves. References: https://bugs.freedesktop.org/show_bug.cgi?id=106423 Fixes: d15d7538 ("drm/i915: Tune down init error message due to failure injection") Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
- 07 May, 2018 5 commits
-
-
Paulo Zanoni authored
This implements the "MG PLL Programming" sequence from our spec. The biggest problem was that the spec assumes real numbers, so we had to adjust some numbers and calculations due to the fact that the Kernel prefers to deal with integers. I recommend grabbing some coffee, a pen and paper before reviewing this patch. v2: - Correctly identify DP encoders after upstream change. - Small checkpatch issues. - Rebase. v3: - Try to impove the comment on the tdc_targetcnt calculation based on Manasi's feedback (Manasi). - Rebase. Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-7-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
Just use the hardcoded tables provided by our spec. v2: Rebase. v3: Clarify that 38.4 uses the 19.2 table (James). Reviewed-by:
James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Paulo Zanoni authored
HDMI mode DPLL programming on ICL is the same as CNL, so just reuse the CNL code. v2: - Properly detect HDMI crtcs. - Rebase after changes to the cnl function (clock * 1000). v3: - Add a comment to clarify why we treat 38.4 as 19.2 (James). Reviewed-by:
-
Paulo Zanoni authored
This commit introduces the definitions for the ICL clocks and adds the basic functions to the shared DPLL framework. It adds code for the Enable and Disable sequences for some PLLs, but it does not have the code to compute the actual PLL values, which are marked as TODO comments and should be introduced as separate commits. Special thanks to James Ausmus for investigating and fixing a bug with the placement of icl_unmap_plls_to_ports() function. v2: - Rebase around dpll_lock changes. v3: - The spec now says what the timeouts should be. - Touch DPCLKA_CFGCR0_ICL at the appropriate time so we don't freeze the machine. - Checkpatch found a white space problem. - Small adjustments before upstreaming. v4: - Move the ICL checks out of the *map_plls_to_ports() functions (James) - Add extra encoder check (James) - Call icl_unmap_plls_to_ports() later (James) v5: - Rebase after the pll struct changes. v6: - Properly make the unmap function based on encoders_post_disable() with regarding to checks and iterators. - Address checkpatch comment on "min = max = x()". Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Imre Deak authored
Add documentation to gen9_set_dc_state() on what enabling a given DC state means and at what point HW/DMC actually enters/exits these states. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180417113147.25120-1-imre.deak@intel.com
-
- 04 May, 2018 10 commits
-
-
Chris Wilson authored
Ignore the tests looking at the innards of execlists and its submission tasklets on machines that don't support execlists! Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180504124202.24894-1-chris@chris-wilson.co.uk
-
Florent Flament authored
Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` in kernel log at boot time. Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power on its screen during Intel i915 DRM initialization. This currently results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` message appearing in the kernel log during boot time and when stopping the machine. This change increases the timeout of the `intel_enable_lvds` function from 1 to 5 seconds, letting enough time for the Satellite 930 LCD screen to power on, and suppressing the error message from the kernel log. This patch has been successfully tested on Linux 4.14 running on a Toshiba Satellite Z930. [vsyrjala: bump the timeout from 2 to 5 seconds to match the DP code and properly cover the max hw timeout of ~4 seconds, and drop the comment about the specific machine since this is not a particulary surprising issue, nor specific to that one machine] Signed-off-by:
Florent Flament <contact@florentflament.com> Cc: stable@vger.kernel.org Cc: Pavel Petrovic <ppetrovic@acm.org> Cc: Sérgio M. Basto <sergio@serjux.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414 References: https://bugzilla.kernel.org/show_bug.cgi?id=57591Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.comReviewed-by:
-
Tvrtko Ursulin authored
It is useful to see the priority as requests are coming in and completed status as requests are coming out of the GPU. To achieve this in a more readable way we need to abandon the common request_hw tracepoint class. Signed-off-by:
-
Chris Wilson authored
"An outstanding request must still be on an active ring somewhere" is only true if we haven't just been interrupted by the shrinker in the middle of allocating the request itself. (At the start of i915_request_alloc() we pin the context and prepare the GT for activity, marking it as active, and then try to allocate the request. If this allocation invokes the shrinker, we try to reclaim some space by calling i915_retire_requests() which may then be confused by the pre-reservation of active_requests.) <3>[ 125.472695] i915_retire_requests:1429 GEM_BUG_ON(list_empty(&i915->gt.active_rings)) <2>[ 125.472792] kernel BUG at drivers/gpu/drm/i915/i915_request.c:1429! <4>[ 125.472822] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI <4>[ 125.498764] Modules linked in: snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel btusb btrtl btbcm btintel cdc_ether snd_hda_codec_realtek bluetooth i915 snd_hda_codec_generic usbnet r8152 mii ecdh_generic lpc_ich mei_me snd_hda_intel snd_hda_codec mei snd_hwdep snd_hda_core snd_pcm prime_numbers <4>[ 125.498923] CPU: 0 PID: 1115 Comm: gem_exec_create Tainted: G U 4.17.0-rc3-gc49cbe0d1eb8-kasan_32+ #1 <4>[ 125.498955] Hardware name: GOOGLE Peppy/Peppy, BIOS MrChromebox 02/04/2018 <4>[ 125.499074] RIP: 0010:i915_retire_requests+0x3f2/0x590 [i915] <4>[ 125.499095] RSP: 0018:ffff88004e5dec40 EFLAGS: 00010282 <4>[ 125.499117] RAX: 0000000000000010 RBX: ffff8800458f0000 RCX: 0000000000000000 <4>[ 125.499140] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff880060c2f6f0 <4>[ 125.499164] RBP: ffff88004e5dee30 R08: ffffed000c185ee6 R09: ffffed000c185ee6 <4>[ 125.499187] R10: 0000000000000001 R11: ffffed000c185ee5 R12: ffff8800553da160 <4>[ 125.499210] R13: dffffc0000000000 R14: 0000000000000000 R15: ffff8800458faed0 <4>[ 125.499235] FS: 00007fe18f052980(0000) GS:ffff880065400000(0000) knlGS:0000000000000000 <4>[ 125.499262] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 125.499282] CR2: 00007f01df11efb8 CR3: 00000000518d4001 CR4: 00000000000606f0 <4>[ 125.499304] Call Trace: <4>[ 125.499417] i915_gem_shrink+0x576/0xb50 [i915] <4>[ 125.499532] ? i915_gem_shrinker_count+0x2f0/0x2f0 [i915] <4>[ 125.499561] ? trace_hardirqs_on_thunk+0x1a/0x1c <4>[ 125.499671] ? i915_gem_shrinker_count+0x1d6/0x2f0 [i915] <4>[ 125.499782] ? i915_gem_shrinker_scan+0xc4/0x320 [i915] <4>[ 125.499889] i915_gem_shrinker_scan+0xc4/0x320 [i915] <4>[ 125.499997] ? i915_gem_shrinker_vmap+0x3a0/0x3a0 [i915] <4>[ 125.500021] ? do_raw_spin_unlock+0x4f/0x240 <4>[ 125.500042] ? _raw_spin_unlock+0x29/0x40 <4>[ 125.500149] ? i915_gem_shrinker_count+0x1d6/0x2f0 [i915] <4>[ 125.500177] shrink_slab.part.18+0x23e/0x8f0 <4>[ 125.500202] ? unregister_shrinker+0x1f0/0x1f0 <4>[ 125.500226] ? mem_cgroup_iter+0x379/0xcc0 <4>[ 125.500249] shrink_node+0xa7e/0x1180 <4>[ 125.500276] ? shrink_node_memcg+0x11f0/0x11f0 <4>[ 125.500297] ? __delayacct_freepages_start+0x38/0x80 <4>[ 125.500319] ? __is_insn_slot_addr+0xe3/0x1a0 <4>[ 125.500342] ? recalibrate_cpu_khz+0x10/0x10 <4>[ 125.500361] ? ktime_get+0xb2/0x140 <4>[ 125.500382] do_try_to_free_pages+0x2d3/0xe40 <4>[ 125.500407] ? allow_direct_reclaim.part.23+0x1e0/0x1e0 <4>[ 125.500429] ? shrink_node+0x1180/0x1180 <4>[ 125.500450] ? __read_once_size_nocheck.constprop.4+0x10/0x10 <4>[ 125.500476] try_to_free_pages+0x1af/0x560 <4>[ 125.500497] ? do_try_to_free_pages+0xe40/0xe40 <4>[ 125.500525] __alloc_pages_nodemask+0xadc/0x2130 <4>[ 125.500553] ? gfp_pfmemalloc_allowed+0x150/0x150 <4>[ 125.500654] ? i915_gem_do_execbuffer+0x219d/0x32e0 [i915] <4>[ 125.500678] ? debug_check_no_locks_freed+0x2a0/0x2a0 <4>[ 125.500701] ? __debug_object_init+0x322/0xd90 <4>[ 125.500722] ? debug_check_no_locks_freed+0x2a0/0x2a0 <4>[ 125.500827] ? i915_gem_do_execbuffer+0xdc2/0x32e0 [i915] <4>[ 125.500942] ? i915_request_alloc+0x5b5/0x13f0 [i915] <4>[ 125.500964] ? page_frag_free+0x170/0x170 <4>[ 125.500984] ? debug_check_no_locks_freed+0x2a0/0x2a0 <4>[ 125.501008] new_slab+0x21d/0x5c0 <4>[ 125.501029] ___slab_alloc.constprop.35+0x322/0x3e0 <4>[ 125.501052] ? reservation_object_reserve_shared+0x10b/0x250 <4>[ 125.501074] ? __ww_mutex_lock.constprop.3+0x1104/0x2cf0 <4>[ 125.501097] ? _raw_spin_unlock_irqrestore+0x39/0x60 <4>[ 125.501120] ? fs_reclaim_acquire+0x10/0x10 <4>[ 125.501138] ? lock_acquire+0x138/0x3c0 <4>[ 125.501156] ? lock_acquire+0x3c0/0x3c0 <4>[ 125.501176] ? reservation_object_reserve_shared+0x10b/0x250 <4>[ 125.501198] ? __slab_alloc.isra.27.constprop.34+0x3d/0x70 <4>[ 125.501219] __slab_alloc.isra.27.constprop.34+0x3d/0x70 <4>[ 125.501243] ? reservation_object_reserve_shared+0x10b/0x250 <4>[ 125.501265] __kmalloc_track_caller+0x313/0x350 <4>[ 125.501287] krealloc+0x62/0xb0 <4>[ 125.501305] reservation_object_reserve_shared+0x10b/0x250 <4>[ 125.501411] i915_gem_do_execbuffer+0x2040/0x32e0 [i915] <4>[ 125.501522] ? eb_relocate_slow+0xad0/0xad0 [i915] <4>[ 125.501544] ? debug_check_no_locks_freed+0x2a0/0x2a0 <4>[ 125.501646] ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915] <4>[ 125.501755] ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915] <4>[ 125.501779] ? drm_dev_get+0x20/0x20 <4>[ 125.501803] ? __might_fault+0xea/0x1a0 <4>[ 125.501902] ? i915_gem_execbuffer2_ioctl+0x108/0x770 [i915] <4>[ 125.502012] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502116] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502218] i915_gem_execbuffer2_ioctl+0x3c5/0x770 [i915] <4>[ 125.502243] ? drm_dev_enter+0xe0/0xe0 <4>[ 125.502260] ? lock_acquire+0x138/0x3c0 <4>[ 125.502362] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502470] ? i915_gem_object_create.part.28+0x570/0x570 [i915] <4>[ 125.502575] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502680] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502702] drm_ioctl_kernel+0x151/0x200 <4>[ 125.502721] ? drm_ioctl_permit+0x2a0/0x2a0 <4>[ 125.502746] drm_ioctl+0x63a/0x920 <4>[ 125.502844] ? i915_gem_execbuffer_ioctl+0xb90/0xb90 [i915] <4>[ 125.502868] ? drm_getstats+0x20/0x20 <4>[ 125.502886] ? trace_hardirqs_on_thunk+0x1a/0x1c <4>[ 125.502919] do_vfs_ioctl+0x173/0xe90 <4>[ 125.502936] ? trace_hardirqs_on_thunk+0x1a/0x1c <4>[ 125.502957] ? ioctl_preallocate+0x170/0x170 <4>[ 125.502978] ? trace_hardirqs_on_thunk+0x1a/0x1c <4>[ 125.503002] ? retint_kernel+0x2d/0x2d <4>[ 125.503024] ksys_ioctl+0x35/0x60 <4>[ 125.503043] __x64_sys_ioctl+0x6a/0xb0 <4>[ 125.503061] do_syscall_64+0x97/0x400 <4>[ 125.503081] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 125.503101] RIP: 0033:0x7fe18e4f65d7 <4>[ 125.503116] RSP: 002b:00007ffe2ffc06a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 <4>[ 125.503145] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe18e4f65d7 <4>[ 125.503168] RDX: 00007ffe2ffc07f0 RSI: 0000000040406469 RDI: 0000000000000003 <4>[ 125.503191] RBP: 00007ffe2ffc07f0 R08: 0000000000000004 R09: 00007ffe2ffcf080 <4>[ 125.503215] R10: 000000000002c7de R11: 0000000000000246 R12: 0000000040406469 <4>[ 125.503238] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 <4>[ 125.503268] Code: e8 18 a0 c9 da 48 8b 35 25 3a 47 00 49 c7 c0 a0 3b 88 c0 b9 95 05 00 00 48 c7 c2 e0 49 88 c0 48 c7 c7 8d 3b 5d c0 e8 ee 7e db da <0f> 0b 48 89 ef e8 a4 26 f5 da e9 51 fe ff ff e8 8a 26 f5 da e9 <1>[ 125.503548] RIP: i915_retire_requests+0x3f2/0x590 [i915] RSP: ffff88004e5dec40 Fixes: 643b450a ("drm/i915: Only track live rings for retiring") Signed-off-by:
-
Chris Wilson authored
Following commit f773568b ("drm/i915: nuke the duplicated stolen discovery"), the if-else-chain for determining the GTT size is redundant with the !chv branches all being the same. Reported-by:
-
Andy Shevchenko authored
The new helper returns index of the matching string in an array. We are going to use it here. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Limit the arbitration (where preemption may occur) to inside the batch, and prevent it from happening on the pipecontrols/flushes we use to write the breadcrumb seqno. Once the user batch is complete, we have nothing left to do but serialise and emit the breadcrumb; switching contexts at this point is futile so don't. Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180503195416.22498-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Don't pre-emptively retire the oldest request in our ring's list if it is the only request. We keep various bits of state alive using the active reference from the request and would rather transfer that state over to a new request rather than the more involved process of retiring and reacquiring it. Signed-off-by:
-
Chris Wilson authored
When userspace is passing around swapbuffers using DRI, we frequently have to open and close the same object in the foreign address space. This shows itself as the same object being rebound at roughly 30fps (with a second object also being rebound at 30fps), which involves us having to rewrite the page tables and maintain the drm_mm range manager every time. However, since the object still exists and it is only the local handle that disappears, if we are lazy and do not unbind the VMA immediately when the local user closes the object but defer it until the GPU is idle, then we can reuse the same VMA binding. We still have to be careful to mark the handle and lookup tables as closed to maintain the uABI, just allowing the underlying VMA to be resurrected if the user is able to access the same object from the same context again. If the object itself is destroyed (neither userspace keeping a handle to it), the VMA will be reaped immediately as usual. In the future, this will be even more useful as instantiating a new VMA for use on the GPU will become heavier. A nuisance indeed, so nip it in the bud. v2: s/__i915_vma_final_close/i915_vma_destroy/ etc. v3: Leave a hint as to why we deferred the unbind on close. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in pr_err error message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
- 03 May, 2018 8 commits
-
-
Tomasz Lis authored
In Icelake, there are more engines on which Memory Object Control States need to be configured. Besides adding Icelake under Skylake config, the patch makes sure MOCS register addresses for the new engines are properly defined. Additional patch might be need later, in case the specification will propose different MOCS config values for Icelake than in previous gens. v2: Restricted comments to gen11, updated description, renamed defines. v3: Used proper engine indexes for gen11. v4: Ensure patch is Icelake only. v5: Style fixes (proposed by mwajdeczko) v6 (from Paulo): fix checkpatch's COMMIT_LOG_LONG_LINE (Checkpatch). BSpec: 19405 BSpec: 21140 Cc: Oscar Mateo Lozano <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Tomasz Lis <tomasz.lis@intel.com> Signed-off-by:
-
Ville Syrjälä authored
During state readout we first read out the pipe src size, store that information in the user mode h/vdisplay, but later on we overwrite that with the actual crtc timings. That makes our read out crtc state inconsistent with itself when the BIOS has enabled the panel fitter to scale the pipe contents. Let's preserve the pipe src size based information in the user mode to make things consistent again. This fixes a problem introduced by commit a2936e3d ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle") where the inconsistent state is now leading the plane clipping code to report a failure on account the plane dst coordinates not matching the user mode size. Previously we did the plane clipping based on the pipe src size instead and thus never noticed the inconsistency. The failure manifests as a WARN: [ 0.762117] [drm:intel_dump_pipe_config [i915]] requested mode: [ 0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa ... [ 0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143 ... [ 0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC [ 0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0 [ 0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0 [ 0.764713] ------------[ cut here ]------------ [ 0.764714] Could not determine valid watermarks for inherited state [ 0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915] ... Cc: FadeMind <fademind@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by:
FadeMind <fademind@gmail.com> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by:
-
Tarun authored
No functional changes, just a minor knit. Stumbled across the kernel doc for schedule_timeout() which quotes "In all cases the return value is guaranteed to be non-negative". Also, the return code of schedule_timeout() already checks for negative values "return timeout < 0 ? 0 : timeout;" and returns 0 in such cases. Furthermore, the msec_to_jiffies returns an ungined long value. So, let's do away with the redundant check for an atomic pipe update. v2: Commit message changes (Manasi). Reviewed-by:
Tarun Vyas <tarun.vyas@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
On intel_dp_compute_config() we were calculating the needed vco for eDP on gen9 and we stashing it in intel_atomic_state.cdclk.logical.vco However few moments later on intel_modeset_checks() we fully replace entire intel_atomic_state.cdclk.logical with dev_priv->cdclk.logical fully overwriting the logical desired vco for eDP on gen9. So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read CDCLK_CTL to verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch. [ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 v2: Move the entire eDP's vco logical adjustment to inside the skl_modeset_calc_cdclk as suggested by Ville. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Chris Wilson authored
As we unpark the engines and are about to begin a new cycle of activity, mark the current status of the hangceck as idle so that we avoid carrying over a stale timestamp/action into the next cycle. Signed-off-by:
-
Chris Wilson authored
In the unusual circumstance where we reuse a seqno (for example, in igt), make sure that we reset the hangcheck timestamp before it sees the same seqno again. References: https://bugs.freedesktop.org/show_bug.cgi?id=106215Signed-off-by:
-
Chris Wilson authored
If we try to suspend a wedged device following a GPU reset failure, we will also fail to turn off the rc6 powerwells (on vlv), leading to a *ERROR*. This is quite expected in this case, so the best we can do is shake our heads and reduce the *ERROR* to a debug so CI stops complaining. Testcase: igt/gem_eio/in-flight-suspend #vlv Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105583Signed-off-by:
-
Chris Wilson authored
Move the tracepoint into the common execlists_context_schedule_out() and call it from preemption completion as well. A small bit of refactoring code should help with when tracing, or else we end up with requests mysteriously disappearing and some being emitted to HW multiple times. Reported-by:
-
- 02 May, 2018 10 commits
-
-
Chris Wilson authored
We need to move to a more flexible timeline that doesn't assume one fence context per engine, and so allow for a single timeline to be used across a combination of engines. This means that preallocating a fence context per engine is now a hindrance, and so we want to introduce the singular timeline. From the code perspective, this has the notable advantage of clearing up a lot of mirky semantics and some clumsy pointer chasing. By splitting the timeline up into a single entity rather than an array of per-engine timelines, we can realise the goal of the previous patch of tracking the timeline alongside the ring. v2: Tweak wait_for_idle to stop the compiling thinking that ret may be uninitialised. Signed-off-by:
-
Chris Wilson authored
In the future, we want to move a request between engines. To achieve this, we first realise that we have two timelines in effect here. The first runs through the GTT is required for ordering vma access, which is tracked currently by engine. The second is implied by sequential execution of commands inside the ringbuffer. This timeline is one that maps to userspace's expectations when submitting requests (i.e. given the same context, batch A is executed before batch B). As the rings's timelines map to userspace and the GTT timeline an implementation detail, move the timeline from the GTT into the ring itself (per-context in logical-ring-contexts/execlists, or a global per-engine timeline for the shared ringbuffers in legacy submission. The two timelines are still assumed to be equivalent at the moment (no migrating requests between engines yet) and so we can simply move from one to the other without adding extra ordering. v2: Reinforce that one isn't allowed to mix the engine execution timeline with the client timeline from userspace (on the ring). Signed-off-by:
-
Anusha Srivatsa authored
Replace 01.org URL with upstream linux-firmware repo URL. We no longer release firmware to 01.org. linux-firmware.git is the ultimate place to find the i915 firmwares. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Acked-by:
-
Chris Wilson authored
As our early doorbell is split between early allocation and a late setup after we have a channel to the GuC, it may happen due to a lapse of programmer judgement that we try to setup an invalid doorbell. Make use of our has_doorbell() function to check the doorbell does exist for the client before we try and tell the guc about it. In doing so, we prevent the compiler from warning about the otherwise unused function in some configurations. Reported-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Matthias Kaehlcke authored
Commit 39bf4de8 ("drm/i915: Add -Wall -Wextra to our build, set warnings to full") enabled extra warnings for i915 to spot possible bugs in new code, and then disabled a subset of these warnings to keep the current code building without warnings (with gcc). Enabling the extra warnings also enabled some additional clang-only warnings, as a result building i915 with clang currently is extremely noisy. For now also disable the clang warnings sign-compare, sometimes-uninitialized, unneeded-internal-declaration and initializer-overrides. If desired they can be re-enabled after the code has been fixed. Signed-off-by:
-
Chris Wilson authored
Since the advent of execlists, the HW no longer executes from a single statically assigned ring, but instead switches to a different ring for each context (logical ringbuffer contexts as it is called). So a good way to tally the executing context against what we have queued is by comparing the RING_START register against our requests. Make it so. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502104150.29874-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The old wait_on_atomic_t used a custom callback to perform the schedule(), which used my return semantics of reporting an error code on timeout. wait_var_event_timeout() uses the schedule() return semantics of reporting the remaining jiffies (1 if it timed out with 0 jiffies remaining!) and 0 on failure. This semantic mismatch lead to us falsely claiming a time out occurred. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106085 Fixes: d224985a ("sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API") Signed-off-by:
-
Jani Nikula authored
Use i915.dmc_firmware_path to override default firmware for the platform and bypassing version checks. v2: add missing param struct member declaration (David) Tested-by:
David Weinehall <david.weinehall@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Need d224985a ("sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API") in dinq to be able to fix https://bugs.freedesktop.org/show_bug.cgi?id=106085. Signed-off-by:
-
Mika Kuoppala authored
Using plain jiffies in error state output makes the output time differences relative to the current system time. This is wrong as it makes output time differences dependent of when the error state is printed rather than when it is captured. Store capture jiffies into error state and use it when outputting the state to fix time differences output. v2: use engine timestamp as epoch, output formatting (Chris) v3: pass epoch to print_engine/request (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 01 May, 2018 1 commit
-
-
Chris Wilson authored
Due to the latency of the tasklet running from ksoftirqd, by the time we process the execlist dequeue may be a long time behind the GPU. If the request was completed when we ran reschedule, we will not have tweaked its priority, but if it is still listed as being in-flight for dequeue we will use it as a reference for the rest of the queue, including requests from its own context which will now be at higher priority. This can cause us to issue a preempt-to-idle request, even though the request we want to preempt is already complete. Reported-by:
-
- 30 Apr, 2018 3 commits
-
-
Manasi Navare authored
On clock recovery this function is called to find out the max voltage swing level that we could go. However gen 9 functions use the old buffer translation tables to figure that out. ICL uses different set of tables for eDP and DP for both Combo and MG PHY ports. This patch adds the hook for ICL for getting this information from appropriate buf trans tables. v5 (from Paulo): * New rebase after changes to earlier patches. v4: * Rebase. v3: * Follow the coding conventions here (https://cgit.freedesktop.org/drm-intel/tree/Documentation/process/codin g-style.rst#n191) (Paulo) v2: * Rebase after patch that adds voltage check inside buf trans function (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Manasi Navare authored
This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. The Voltage swing seqeuence is similar to Cannonlake. However it has different register definitions and hence it makes sense to create a separate vswing sequence and program functions for ICL to leave room for more changes in case the Bspec changes later and deviates from CNL sequence. v2: Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula) v3: * Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo) v4: * Call it combo_vswing, use switch statement (Paulo) v5 (from Paulo): * Fix a typo. * s/rate < 600000/rate <= 600000/. * Don't remove blank lines that should be there. v6: * Rebased by Rodrigo on top of Cannonlake changes where non vswing sequences are not aligned with iboost anymore. v7: Another rebase after an upstream rework. v8 (from Paulo): * Adjust the code to the upstream output type changes. * Squash the patch that moved some functions up. * Merge both get_combo_buf_trans functions in order to simplify the code. * Change the changelog format. v9 (from Paulo): * Use RTERM_SELECT instead of SCALING_MODE_SEL. * Adjust the output type handling according to how the other platforms do it now. v10 (from Paulo): * Fix comment left out from v9 changes (Rodrigo). Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by:
-
Chris Wilson authored
We don't need to track every ring for its lifetime as they are managed by the contexts/engines. What we do want to track are the live rings so that we can sporadically clean up requests if userspace falls behind. We can simply restrict the gt->rings list to being only gt->live_rings. v2: s/live/active/ for consistency with gt.active_requests Suggested-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
