- 06 Mar, 2019 6 commits
-
-
Vasily Averin authored
sendpage was not designed for processing of the Slab pages, in some situations it can trigger BUG_ON on receiving side. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Add the path names here so that git-send-email can pick up the netdev@vger.kernel.org Cc line automatically for a patch that only touches the headers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
A bugfix just broke compilation of appletalk when CONFIG_SYSCTL is disabled: In file included from net/appletalk/ddp.c:65: net/appletalk/ddp.c: In function 'atalk_init': include/linux/atalk.h:164:34: error: expected expression before 'do' #define atalk_register_sysctl() do { } while(0) ^~ net/appletalk/ddp.c:1934:7: note: in expansion of macro 'atalk_register_sysctl' rc = atalk_register_sysctl(); This is easier to avoid by using conventional inline functions as stubs rather than macros. The header already has inline functions for other purposes, so I'm changing over all the macros for consistency. Fixes: 6377f787 ("appletalk: Fix use-after-free in atalk_proc_exit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Maguire authored
Naresh Kamboju noted the following oops during execution of selftest tools/testing/selftests/bpf/test_tunnel.sh on x86_64: [ 274.120445] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 274.128285] #PF error: [INSTR] [ 274.131351] PGD 8000000414a0e067 P4D 8000000414a0e067 PUD 3b6334067 PMD 0 [ 274.138241] Oops: 0010 [#1] SMP PTI [ 274.141734] CPU: 1 PID: 11464 Comm: ping Not tainted 5.0.0-rc4-next-20190129 #1 [ 274.149046] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 274.156526] RIP: 0010: (null) [ 274.160280] Code: Bad RIP value. [ 274.163509] RSP: 0018:ffffbc9681f83540 EFLAGS: 00010286 [ 274.168726] RAX: 0000000000000000 RBX: ffffdc967fa80a18 RCX: 0000000000000000 [ 274.175851] RDX: ffff9db2ee08b540 RSI: 000000000000000e RDI: ffffdc967fa809a0 [ 274.182974] RBP: ffffbc9681f83580 R08: ffff9db2c4d62690 R09: 000000000000000c [ 274.190098] R10: 0000000000000000 R11: ffff9db2ee08b540 R12: ffff9db31ce7c000 [ 274.197222] R13: 0000000000000001 R14: 000000000000000c R15: ffff9db3179cf400 [ 274.204346] FS: 00007ff4ae7c5740(0000) GS:ffff9db31fa80000(0000) knlGS:0000000000000000 [ 274.212424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 274.218162] CR2: ffffffffffffffd6 CR3: 00000004574da004 CR4: 00000000003606e0 [ 274.225292] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 274.232416] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 274.239541] Call Trace: [ 274.241988] ? tnl_update_pmtu+0x296/0x3b0 [ 274.246085] ip_md_tunnel_xmit+0x1bc/0x520 [ 274.250176] gre_fb_xmit+0x330/0x390 [ 274.253754] gre_tap_xmit+0x128/0x180 [ 274.257414] dev_hard_start_xmit+0xb7/0x300 [ 274.261598] sch_direct_xmit+0xf6/0x290 [ 274.265430] __qdisc_run+0x15d/0x5e0 [ 274.269007] __dev_queue_xmit+0x2c5/0xc00 [ 274.273011] ? dev_queue_xmit+0x10/0x20 [ 274.276842] ? eth_header+0x2b/0xc0 [ 274.280326] dev_queue_xmit+0x10/0x20 [ 274.283984] ? dev_queue_xmit+0x10/0x20 [ 274.287813] arp_xmit+0x1a/0xf0 [ 274.290952] arp_send_dst.part.19+0x46/0x60 [ 274.295138] arp_solicit+0x177/0x6b0 [ 274.298708] ? mod_timer+0x18e/0x440 [ 274.302281] neigh_probe+0x57/0x70 [ 274.305684] __neigh_event_send+0x197/0x2d0 [ 274.309862] neigh_resolve_output+0x18c/0x210 [ 274.314212] ip_finish_output2+0x257/0x690 [ 274.318304] ip_finish_output+0x219/0x340 [ 274.322314] ? ip_finish_output+0x219/0x340 [ 274.326493] ip_output+0x76/0x240 [ 274.329805] ? ip_fragment.constprop.53+0x80/0x80 [ 274.334510] ip_local_out+0x3f/0x70 [ 274.337992] ip_send_skb+0x19/0x40 [ 274.341391] ip_push_pending_frames+0x33/0x40 [ 274.345740] raw_sendmsg+0xc15/0x11d0 [ 274.349403] ? __might_fault+0x85/0x90 [ 274.353151] ? _copy_from_user+0x6b/0xa0 [ 274.357070] ? rw_copy_check_uvector+0x54/0x130 [ 274.361604] inet_sendmsg+0x42/0x1c0 [ 274.365179] ? inet_sendmsg+0x42/0x1c0 [ 274.368937] sock_sendmsg+0x3e/0x50 [ 274.372460] ___sys_sendmsg+0x26f/0x2d0 [ 274.376293] ? lock_acquire+0x95/0x190 [ 274.380043] ? __handle_mm_fault+0x7ce/0xb70 [ 274.384307] ? lock_acquire+0x95/0x190 [ 274.388053] ? __audit_syscall_entry+0xdd/0x130 [ 274.392586] ? ktime_get_coarse_real_ts64+0x64/0xc0 [ 274.397461] ? __audit_syscall_entry+0xdd/0x130 [ 274.401989] ? trace_hardirqs_on+0x4c/0x100 [ 274.406173] __sys_sendmsg+0x63/0xa0 [ 274.409744] ? __sys_sendmsg+0x63/0xa0 [ 274.413488] __x64_sys_sendmsg+0x1f/0x30 [ 274.417405] do_syscall_64+0x55/0x190 [ 274.421064] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 274.426113] RIP: 0033:0x7ff4ae0e6e87 [ 274.429686] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 ca d9 2b 00 48 63 d2 48 63 ff 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 53 48 89 f3 48 83 ec 10 48 89 7c 24 08 [ 274.448422] RSP: 002b:00007ffcd9b76db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 274.455978] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007ff4ae0e6e87 [ 274.463104] RDX: 0000000000000000 RSI: 00000000006092e0 RDI: 0000000000000003 [ 274.470228] RBP: 0000000000000000 R08: 00007ffcd9bc40a0 R09: 00007ffcd9bc4080 [ 274.477349] R10: 000000000000060a R11: 0000000000000246 R12: 0000000000000003 [ 274.484475] R13: 0000000000000016 R14: 00007ffcd9b77fa0 R15: 00007ffcd9b78da4 [ 274.491602] Modules linked in: cls_bpf sch_ingress iptable_filter ip_tables algif_hash af_alg x86_pkg_temp_thermal fuse [last unloaded: test_bpf] [ 274.504634] CR2: 0000000000000000 [ 274.507976] ---[ end trace 196d18386545eae1 ]--- [ 274.512588] RIP: 0010: (null) [ 274.516334] Code: Bad RIP value. [ 274.519557] RSP: 0018:ffffbc9681f83540 EFLAGS: 00010286 [ 274.524775] RAX: 0000000000000000 RBX: ffffdc967fa80a18 RCX: 0000000000000000 [ 274.531921] RDX: ffff9db2ee08b540 RSI: 000000000000000e RDI: ffffdc967fa809a0 [ 274.539082] RBP: ffffbc9681f83580 R08: ffff9db2c4d62690 R09: 000000000000000c [ 274.546205] R10: 0000000000000000 R11: ffff9db2ee08b540 R12: ffff9db31ce7c000 [ 274.553329] R13: 0000000000000001 R14: 000000000000000c R15: ffff9db3179cf400 [ 274.560456] FS: 00007ff4ae7c5740(0000) GS:ffff9db31fa80000(0000) knlGS:0000000000000000 [ 274.568541] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 274.574277] CR2: ffffffffffffffd6 CR3: 00000004574da004 CR4: 00000000003606e0 [ 274.581403] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 274.588535] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 274.595658] Kernel panic - not syncing: Fatal exception in interrupt [ 274.602046] Kernel Offset: 0x14400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 274.612827] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- [ 274.620387] ------------[ cut here ]------------ I'm also seeing the same failure on x86_64, and it reproduces consistently. >From poking around it looks like the skb's dst entry is being used to calculate the mtu in: mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu; ...but because that dst_entry has an "ops" value set to md_dst_ops, the various ops (including mtu) are not set: crash> struct sk_buff._skb_refdst ffff928f87447700 -x _skb_refdst = 0xffffcd6fbf5ea590 crash> struct dst_entry.ops 0xffffcd6fbf5ea590 ops = 0xffffffffa0193800 crash> struct dst_ops.mtu 0xffffffffa0193800 mtu = 0x0 crash> I confirmed that the dst entry also has dst->input set to dst_md_discard, so it looks like it's an entry that's been initialized via __metadata_dst_init alright. I think the fix here is to use skb_valid_dst(skb) - it checks for DST_METADATA also, and with that fix in place, the problem - which was previously 100% reproducible - disappears. The below patch resolves the panic and all bpf tunnel tests pass without incident. Fixes: c8b34e68 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
If a non local multicast packet reaches ip_route_input_rcu() while the ingress device IPv4 private data (in_dev) is NULL, we end up doing a NULL pointer dereference in IN_DEV_MFORWARD(). Since the later call to ip_route_input_mc() is going to fail if !in_dev, we can fail early in such scenario and avoid the dangerous code path. v1 -> v2: - clarified the commit message, no code changes Reported-by: Tianhao Zhao <tizhao@redhat.com> Fixes: e58e4159 ("net: Enable support for VRF with ipv4 multicast") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There were a couple logical ORs accidentally mixed in with the bitwise ORs. Fixes: e8149933 ("net: hns3: remove hnae3_get_bit in data path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Mar, 2019 21 commits
-
-
wenxu authored
dst_cache_destroy will be called in dst_release dst_release-->dst_destroy_rcu-->dst_destroy-->metadata_dst_free -->dst_cache_destroy It should not call dst_cache_destroy before dst_release Fixes: 41411e2f ("net/sched: act_tunnel_key: Add dst_cache support") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Erik Hugne authored
Fix regression bug introduced in commit 365ad353 ("tipc: reduce risk of user starvation during link congestion") Only signal -EDESTADDRREQ for RDM/DGRAM if we don't have a cached sockaddr. Fixes: 365ad353 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Paul Burton: - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB (GINVT) instructions, allowing for more efficient TLB maintenance when running on a CPU such as the I6500 that supports these. - Enable huge page support for MIPS64r6. - Optimize post-DMA cache sync by removing that code entirely for kernel configurations in which we know it won't be needed. - The number of pages allocated for interrupt stacks is now calculated correctly, where before we would wastefully allocate too much memory in some configurations. - The ath79 platform migrates to devicetree. - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board. - The ingenic/jz4740 platform gains support for appended devicetrees. - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see cleanups as do various pieces of core architecture code. * tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits) MIPS: lantiq: Remove separate GPHY Firmware loader MIPS: ingenic: Add support for appended devicetree MIPS: SGI-IP27: rework HUB interrupts MIPS: SGI-IP27: do boot CPU init later MIPS: SGI-IP27: do xtalk scanning later MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output MIPS: SGI-IP27: clean up bridge access and header files MIPS: SGI-IP27: get rid of volatile and hubreg_t MIPS: irq: Allocate accurate order pages for irq stack MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys() MIPS: eBPF: Remove REG_32BIT_ZERO_EX MIPS: eBPF: Always return sign extended 32b values MIPS: CM: Fix indentation MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support MIPS: OCTEON: program rx/tx-delay always from DT MIPS: OCTEON: delete board-specific link status MIPS: OCTEON: don't lie about interface type of CN3005 board MIPS: OCTEON: warn if deprecated link status is being used MIPS: OCTEON: add fixed-link nodes to in-kernel device tree MIPS: Delete unused flush_cache_sigtramp() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: "The most important changes in this patch set are: - DMA-related cleanups for parisc with the aim to move anything not required by drivers out of <asm/dma-mapping.h>, by Christoph Hellwig - Switch to memblock_alloc(), by Mike Rapoport - Makefile cleanups by Masahiro Yamada - Switch to bust_spinlocks(), by Sergey Senozhatsky - Improved initial SMP affinity selection for IRQs - Added IPI- and rescheduling interrupts in /proc/interrupts output" * 'parisc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (21 commits) parisc: use memblock_alloc() instead of custom get_memblock() parisc: Add constants for various PDC firmware calls parisc: Add constant for PDC_PAT_COMPLEX firmware call parisc: Show machine product number during boot parisc: Add constants for PDC_RELOCATE PDC call parisc: Add PDC_CRASH_PREP PDC function number parisc: Use F_EXTEND() macro in iosapic code parisc: remove the HBA_DATA macro parisc/lba_pci: use container_of in LBA_DEV parisc/dino: use container_of in DINO_DEV parisc: properly type the return value of parisc_walk_tree parisc: properly type the iommu field in struct pci_hba_data parisc: turn GET_IOC into an inline function parisc: move internal implementation details out of <asm/dma-mapping.h> parisc: don't include <asm/cacheflush.h> in <asm/dma-mapping.h> parisc: remove meaningless ccflags-y in arch/parisc/boot/Makefile parisc: replace oops_in_progress manipulation with bust_spinlocks() parisc: Improve initial IRQ to CPU assignment parisc: Count IPI function call interrupts parisc: Show rescheduling interrupts on SMP machines only ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: - A copy of Arnds compat wrapper generation series - Pass information about the KVM guest to the host in form the control program code and the control program version code - Map IOV resources to support PCI physical functions on s390 - Add vector load and store alignment hints to improve performance - Use the "jdd" constraint with gcc 9 to make jump labels working again - Remove amode workaround for old z/VM releases from the DCSS code - Add support for in-kernel performance measurements using the CPU measurement counter facility - Introduce a new PMU device cpum_cf_diag to capture counters and store thenn as event raw data. - Bug fixes and cleanups * tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) Revert "s390/cpum_cf: Add kernel message exaplanations" s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=y s390/suspend: fix prefix register reset in swsusp_arch_resume s390: warn about clearing als implied facilities s390: allow overriding facilities via command line s390: clean up redundant facilities list setup s390/als: remove duplicated in-place implementation of stfle s390/cio: Use cpa range elsewhere within vfio-ccw s390/cio: Fix vfio-ccw handling of recursive TICs s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem s390/cpum_cf: Handle EBUSY return code from CPU counter facility reservation s390/cpum_cf: Add kernel message exaplanations s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace s390/cpum_cf: add ctr_stcctm() function s390/cpum_cf: move common functions into a separate file s390/cpum_cf: introduce kernel_cpumcf_avail() function s390/cpu_mf: replace stcctm5() with the stcctm() function s390/cpu_mf: add store cpu counter multiple instruction support s390/cpum_cf: Add minimal in-kernel interface for counter measurements s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alerts ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: - VLA removal - gcc-8.x build fixes - small improvements and cleanups - defconfig updates * tag 'm68k-for-v5.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Add -ffreestanding to CFLAGS m68k/apollo: Fix comment in Makefile dio: Fix buffer overflow in case of unknown board m68k/defconfig: Update defconfigs for v5.0-rc1 m68k/atari: Avoid VLA use in atari_switches_setup() m68k: Avoid VLA use in mangle_kernel_stack() m68k/mac: Use '030 reset method on SE/30 m68k/mac: Remove obsolete comment m68k/mac: Skip VIA port setup unless RTC is connected m68k/mac: Clean up unused timer definitions m68k/defconfig: Drop NET_VENDOR_<FOO>=n
-
Borislav Petkov authored
Linux supports ELF binaries for ~25 years now. a.out coredumping has bitrotten quite significantly and would need some fixing to get it into shape again but considering how even the toolchains cannot create a.out executables in its default configuration, let's deprecate a.out support and remove it a couple of releases later, instead. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Richard Weinberger <richard@nod.at> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Jann Horn <jannh@google.com> Cc: <linux-api@vger.kernel.org> Cc: <linux-fsdevel@vger.kernel.org> Cc: lkml <linux-kernel@vger.kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <x86@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We're (finally) phasing out a.out support for good. As Borislav Petkov points out, we've supported ELF binaries for about 25 years by now, and coredumping in particular has bitrotted over the years. None of the tool chains even support generating a.out binaries any more, and the plan is to deprecate a.out support entirely for the kernel. But I want to start with just removing the core dumping code, because I can still imagine that somebody actually might want to support a.out as a simpler biinary format. Particularly if you generate some random binaries on the fly, ELF is a much more complicated format (admittedly ELF also does have a lot of toolchain support, mitigating that complexity a lot and you really should have moved over in the last 25 years). So it's at least somewhat possible that somebody out there has some workflow that still involves generating and running a.out executables. In contrast, it's very unlikely that anybody depends on debugging any legacy a.out core files. But regardless, I want this phase-out to be done in two steps, so that we can resurrect a.out support (if needed) without having to resurrect the core file dumping that is almost certainly not needed. Jann Horn pointed to the <asm/a.out-core.h> file that my first trivial cut at this had missed. And Alan Cox points out that the a.out binary loader _could_ be done in user space if somebody wants to, but we might keep just the loader in the kernel if somebody really wants it, since the loader isn't that big and has no really odd special cases like the core dumping does. Acked-by: Borislav Petkov <bp@alien8.de> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jannh@google.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto update from Herbert Xu: "API: - Add helper for simple skcipher modes. - Add helper to register multiple templates. - Set CRYPTO_TFM_NEED_KEY when setkey fails. - Require neither or both of export/import in shash. - AEAD decryption test vectors are now generated from encryption ones. - New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random fuzzing. Algorithms: - Conversions to skcipher and helper for many templates. - Add more test vectors for nhpoly1305 and adiantum. Drivers: - Add crypto4xx prng support. - Add xcbc/cmac/ecb support in caam. - Add AES support for Exynos5433 in s5p. - Remove sha384/sha512 from artpec7 as hardware cannot do partial hash" [ There is a merge of the Freescale SoC tree in order to pull in changes required by patches to the caam/qi2 driver. ] * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits) crypto: s5p - add AES support for Exynos5433 dt-bindings: crypto: document Exynos5433 SlimSSS crypto: crypto4xx - add missing of_node_put after of_device_is_available crypto: cavium/zip - fix collision with generic cra_driver_name crypto: af_alg - use struct_size() in sock_kfree_s() crypto: caam - remove redundant likely/unlikely annotation crypto: s5p - update iv after AES-CBC op end crypto: x86/poly1305 - Clear key material from stack in SSE2 variant crypto: caam - generate hash keys in-place crypto: caam - fix DMA mapping xcbc key twice crypto: caam - fix hash context DMA unmap size hwrng: bcm2835 - fix probe as platform device crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number crypto: stm32 - drop pointless static qualifier in stm32_hash_remove() crypto: chelsio - Fixed Traffic Stall crypto: marvell - Remove set but not used variable 'ivsize' crypto: ccp - Update driver messages to remove some confusion crypto: adiantum - add 1536 and 4096-byte test vectors crypto: nhpoly1305 - add a test vector with len % 16 != 0 crypto: arm/aes-ce - update IV after partial final CTR block ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Here we go, another merge window full of networking and #ebpf changes: 1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP range without dealing with floods of ARP traffic, from Linus Lüssing. 2) Throttle buffered multicast packet transmission in mt76, from Felix Fietkau. 3) Support adaptive interrupt moderation in ice, from Brett Creeley. 4) A lot of struct_size conversions, from Gustavo A. R. Silva. 5) Add peek/push/pop commands to bpftool, as well as bash completion, from Stanislav Fomichev. 6) Optimize sk_msg_clone(), from Vakul Garg. 7) Add SO_BINDTOIFINDEX, from David Herrmann. 8) Be more conservative with local resends due to local congestion, from Yuchung Cheng. 9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata. 10) Add health buffer support to devlink, from Eran Ben Elisha. 11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen. 12) Add statistics to basic packet scheduler filter, from Cong Wang. 13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan. 14) Lots of new IP tunneling forwarding tests, also from Nir Dotan. 15) Add 3ad stats to bonding, from Nikolay Aleksandrov. 16) Lots of probing improvements for bpftool, from Quentin Monnet. 17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski. 18) Allow #ebpf programs to access gso_segs from skb shared info, from Eric Dumazet. 19) Add sock_diag support for AF_XDP sockets, from Björn Töpel. 20) Support 22260 iwlwifi devices, from Luca Coelho. 21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov. 22) Add JMP32 instruction class support to #ebpf, from Jiong Wang. 23) Add spinlock support to #ebpf, from Alexei Starovoitov. 24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson. 25) Add device infomation API to devlink, from Jakub Kicinski. 26) Add new timestamping socket options which are y2038 safe, from Deepa Dinamani. 27) Add RX checksum offloading for various sh_eth chips, from Sergei Shtylyov. 28) Flow offload infrastructure, from Pablo Neira Ayuso. 29) Numerous cleanups, improvements, and bug fixes to the PHY layer and many drivers from Heiner Kallweit. 30) Lots of changes to try and make packet scheduler classifiers run lockless as much as possible, from Vlad Buslov. 31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows. 32) Add concurrency tests to tc-tests infrastructure, from Vlad Buslov. 33) Add hwmon support to aquantia, from Heiner Kallweit. 34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet. And I would be remiss if I didn't thank the various major networking subsystem maintainers for integrating much of this work before I even saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso, Johannes Berg, Kalle Valo, and many others. Thank you!" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits) net/sched: avoid unused-label warning net: ignore sysctl_devconf_inherit_init_net without SYSCTL phy: mdio-mux: fix Kconfig dependencies net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework selftest/net: Remove duplicate header sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79 net/mlx5e: Update tx reporter status in case channels were successfully opened devlink: Add support for direct reporter health state update devlink: Update reporter state to error even if recover aborted sctp: call iov_iter_revert() after sending ABORT team: Free BPF filter when unregistering netdev ip6mr: Do not call __IP6_INC_STATS() from preemptible context isdn: mISDN: Fix potential NULL pointer dereference of kzalloc net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs cxgb4/chtls: Prefix adapter flags with CXGB4 net-sysfs: Switch to bitmap_zalloc() mellanox: Switch to bitmap_zalloc() bpf: add test cases for non-pointer sanitiation logic mlxsw: i2c: Extend initialization by querying resources data ...
-
Martin Schwidefsky authored
This reverts commit fb3a0b61. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Linus Torvalds authored
Merge tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - finalize previously announced support for initialization of pattern triggers from Device Tree - fix for null deref on firmware load failure in leds-lp55xx-common.c * tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: lp55xx: fix null deref on firmware load failure leds: trigger: timer: Add initialization from Device Tree leds: trigger: oneshot: Add initialization from Device Tree leds: trigger: pattern: Add pattern initialization from Device Tree leds: Add helper for getting default pattern from Device Tree dt-bindings: leds: Add pattern initialization from Device Tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon updates from Guenter Roeck: - Add support for LM96000, DPS-650AB to existing drivers - Use permission specific SENSOR[_DEVICE]_ATTR variants in several drivers - Replace S_<PERMS> with octal values in several drivers - Update some license headers - Various minor fixes and improvements in several drivers * tag 'hwmon-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (89 commits) dt-bindings: hwmon: Add missing documentation for lm75 hwmon: (ad7418) Add device tree probing hwmon: (ad741x) Add DT bindings for Analog Devices AD741x hwmon: (ntc_thermistor) Convert to new hwmon API hwmon: (pwm-fan) Add optional regulator support dt-bindings: hwmon: Add optional regulator support to pwm-fan hwmon: (f71882fg) Mark expected switch fall-through hwmon: (ad7418) Catch I2C errors hwmon: (lm85) add support for LM96000 high frequencies hwmon: (lm85) support the LM96000 dt-bindings: Add LM96000 as a trivial device hwmon: (lm85) remove freq_map size hardcodes hwmon: (occ) Fix license headers hwmon: (via-cputemp) Use permission specific SENSOR[_DEVICE]_ATTR variants hwmon: (vexpress-hwmon) Use permission specific SENSOR[_DEVICE]_ATTR variants hwmon: (tmp421) Replace S_<PERMS> with octal values hwmon: (tmp103) Use permission specific SENSOR[_DEVICE]_ATTR variants hwmon: (tmp102) Replace S_<PERMS> with octal values hwmon: (tc74) Use permission specific SENSOR[_DEVICE]_ATTR variants hwmon: (tc654) Use permission specific SENSOR[_DEVICE]_ATTR variants ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi updates from Mark Brown: "A fairly quiet release for SPI, the biggest thing is the conversion to use GPIO descriptors which is now 90% done but still needs some stragglers converting. Summary: - Support for inter-word delays - Conversion of the core and most drivers to use GPIO descriptors for GPIO controlled chip selects - New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum" * tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits) spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3 spi: sifive: Remove redundant dev_err call in sifive_spi_probe() spi: sifive: Remove spi_master_put in sifive_spi_remove() spi: spi-gpio: fix SPI_CS_HIGH capability spi: pxa2xx: Setup maximum supported DMA transfer length spi: sifive: Add driver for the SiFive SPI controller spi: sifive: Add DT documentation for SiFive SPI controller spi: sprd: Add a prefix for SPI DMA channel macros spi: sprd: spi: sprd: Add DMA mode support dt-bindings: spi: Add the DMA properties for the SPI dma mode spi: sprd: Add the SPI irq function for the SPI DMA mode dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO spi: gpio: Advertise support for SPI_CS_HIGH spi: sh-msiof: Replace spi_master by spi_controller spi: sh-hspi: Replace spi_master by spi_controller spi: rspi: Replace spi_master by spi_controller spi: atmel-quadspi: add support for sam9x60 qspi controller dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60 spi: atmel-quadspi: add support for named peripheral clock ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator updates from Mark Brown: "The bulk of the standout changes in this release are cleanups, with the core work being a combination of factoring out common code into helpers and the completion of the conversion of the core to use GPIO descriptors. Summary: - Addition of helper functions for current limits and conversion of drivers to use them by Axel Lin. - Lots and lots of cleanups from Axel Lin. - Conversion of the core to use GPIO descriptors rather than numbers by Linus Walleij. - New drivers for Maxim MAX77650 and ROHM BD70528" * tag 'regulator-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (131 commits) regulator: mc13xxx: Constify regulator_ops variables regulator: palmas: Constify palmas_smps_ramp_delay array regulator: wm831x-dcdc: Convert to use regulator_set/get_current_limit_regmap regulator: pv88090: Convert to use regulator_set/get_current_limit_regmap regulator: pv88080: Convert to use regulator_set/get_current_limit_regmap regulator: pv88060: Convert to use regulator_set/get_current_limit_regmap regulator: max77650: Convert to use regulator_set/get_current_limit_regmap regulator: lp873x: Convert to use regulator_set/get_current_limit_regmap regulator: lp872x: Convert to use regulator_set/get_current_limit_regmap regulator: da9210: Convert to use regulator_set/get_current_limit_regmap regulator: da9055: Convert to use regulator_set/get_current_limit_regmap regulator: core: Add set/get_current_limit helpers for regmap users regulator: Fix comment for csel_reg and csel_mask regulator: stm32-vrefbuf: add power management support regulator: 88pm8607: Remove unused fields from struct pm8607_regulator_info regulator: 88pm8607: Simplify pm8607_list_voltage implementation regulator: cpcap: Constify omap4_regulators and xoom_regulators regulator: cpcap: Remove unused vsel_shift from struct cpcap_regulator dt-bindings: regulator: tps65218: rectify units of LS3 dt-bindings: regulator: add LS2 load switch documentation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap updates from Mark Brown: "There are only two changes here: - fix for conflicting attributes on the rbtree node structure - implementation of main status register support in the interrupt code which supports chips that have a register to cut down on the number of per-interrupt status registers that need to be checked when handling interrupts" * tag 'regmap-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Remove attribute packed from struct 'regcache_rbtree_node' regmap: regmap-irq: Add main status register support
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Fixup max_discard/trim calculations - Announce SD specs greater than 4.0 - Add discard support for SD cards - Don't do retries for CMD6 (SWITCH command) - Various cleanups and re-structuring MMC host: - cqhci: * Add maintainers for eMMC CQHCI driver - sdhci: * Consolidate WP GPIO code * Add ADMA3 DMA support for V4 enabled host * Fixup card detect support in pci-o2micro driver * Add support for CMDQ and SDMMC pads auto-calibration in tegra driver * Add DCMD support and CMDQ support, support for i.MX6ULL variant, fixup HS400 timing issue and add HS400_ES support for i.MX8QXP to esdhc-imx driver * Avoid CRC errors by adjusting settings to speed mode and fixup card initialization for high speed mode in renesas_sdhi * Fixup timeout settings for omap * Enable 8 bits bus-width support in atmel-mci * Convert some legacy code in jz4740 driver to use modern APIs * Send a CMD12 to clear DPSM at errors for STM32 sdmmc mmci driver" * tag 'mmc-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (69 commits) mmc:fix a bug when max_discard is 0 mmc: core: Add a debug print when the card may have been replaced mmc: core: Add sd discard timeout mmc: core: Add discard support to sd mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE mmc: core: do not retry CMD6 in __mmc_switch() mmc: core: Convert mmc_align_data_size() into an SDIO specific function mmc: core: Move mmc_of_parse_voltage() to host.c mmc: core: Convert mmc_regulator_get_ocrmask() to static mmc: core: Move regulator helpers to separate file mmc: of_mmc_spi: Convert to mmc_of_parse_voltage() mmc: core: Drop retries as in-parameter to mmc_wait_for_app_cmd() mmc: core: Convert mmc_wait_for_app_cmd() to static mmc: renesas_sdhi: Change HW adjustment register according to speed mode mmc: mmci: Send a CMD12 to clear the DPSM at errors mmc: sdhci-xenon: Fixup already marked switch fall-through mmc: sdhci-tegra: drop ->get_ro() implementation mmc: sdhci-omap: drop ->get_ro() implementation mmc: sdhci: use WP GPIO in sdhci_check_ro() mmc: wmt-sdmmc: Drop unused include ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxLinus Torvalds authored
Pull i3c updates from Boris Brezillon: - Add a /* fall-through */ comment in the dw-i3c-master driver - Update the I3C entries in MAINTAINERS to add an IRC chan * tag 'i3c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: dw-i3c-master: mark expected switch fall-through MAINTAINERS: Add an IRC channel for the I3C subsystem
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD updates from Boris Brezillon: "Core MTD changes: - Use struct_size() where appropriate - mtd_{read,write}() as wrappers around mtd_{read,write}_oob() - Fix misuse of PTR_ERR() in docg3 - Coding style improvements in mtdcore.c SPI NOR changes: Core changes: - Add support of octal mode I/O transfer - Add a bunch of SPI NOR entries to the flash_info table SPI NOR controller driver changes: - cadence-quadspi: * Add support for Octal SPI controller * write upto 8-bytes data in STIG mode - mtk-quadspi: * rename config to a common one * add SNOR_HWCAPS_READ to spi_nor_hwcaps mask - Add Tudor as SPI-NOR co-maintainer NAND changes: NAND core changes: - Fourth batch of fixes/cleanup to the raw NAND core impacting various controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2). - Check the return code of nand_reset() and nand_readid_op(). - Remove ->legacy.erase and single_erase(). - Simplify the locking. - Several implicit fall through annotations. Raw NAND controllers drivers changes: - Fix various possible object reference leaks (MTK, JZ4780, Atmel) - ST: * Add support for STM32 FMC2 NAND flash controller - Meson: * Add support for Amlogic NAND flash controller - Denali: * Several cleanup patches - Sunxi: * Several cleanup patches - FSMC: * Disable NAND on remove() * Reset NAND timings on resume() SPI-NAND drivers changes: - Toshiba: * Add support for all Toshiba products. - Macronix: * Fix ECC status read. - Gigadevice: * Add support for GD5F1GQ4UExxG" * tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtd: (64 commits) mtd: spi-nor: Fix wrong abbreviation HWCPAS mtd: spi-nor: cadence-quadspi: fix spelling mistake: "Couldnt't" -> "Couldn't" mtd: spi-nor: Add support for en25qh64 mtd: spi-nor: Add support for MX25V8035F mtd: spi-nor: Add support for EN25Q80A mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC mtd: spi-nor: split s25fl128s into s25fl128s0 and s25fl128s1 mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode mtd: spi-nor: Add support for mx25u3235f mtd: rawnand: denali_dt: remove single anonymous clock support mtd: rawnand: mtk: fix possible object reference leak mtd: rawnand: jz4780: fix possible object reference leak mtd: rawnand: atmel: fix possible object reference leak mtd: rawnand: fsmc: Disable NAND on remove() mtd: rawnand: fsmc: Reset NAND timings on resume() mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG mtd: rawnand: denali: remove unused dma_addr field from denali_nand_info mtd: rawnand: denali: remove unused function argument 'raw' mtd: rawnand: denali: remove unneeded denali_reset_irq() call ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Switch mdev to generic UUID API (Andy Shevchenko) - Fixup platform reset include paths (Masahiro Yamada) - Fix usage of MINORMASK (Chengguang Xu) - Remove noise from duplicate spapr table unsets (Alexey Kardashevskiy) - Restore device state after PM reset (Alex Williamson) - Ensure memory translation enabled for PCI ROM access (Eric Auger) * tag 'vfio-v5.1-rc1' of git://github.com/awilliam/linux-vfio: vfio_pci: Enable memory accesses before calling pci_map_rom vfio/pci: Restore device state on PM transition vfio/spapr_tce: Skip unsetting already unset table samples/vfio-mdev/mtty: expand minor range when registering chrdev region samples/vfio-mdev/mdpy: expand minor range when registering chrdev region samples/vfio-mdev/mbochs: expand minor range when registering chrdev region vfio: expand minor range when registering chrdev region vfio: platform: reset: fix up include directives to remove ccflags-y vfio-mdev: Switch to use new generic UUID API
-
Slavomir Kaslev authored
The current implementation of splice() and tee() ignores O_NONBLOCK set on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for blocking on pipe arguments. This is inconsistent since splice()-ing from/to non-pipe file descriptors does take O_NONBLOCK into consideration. Fix this by promoting O_NONBLOCK, when set on a pipe, to SPLICE_F_NONBLOCK. Some context for how the current implementation of splice() leads to inconsistent behavior. In the ongoing work[1] to add VM tracing capability to trace-cmd we stream tracing data over named FIFOs or vsockets from guests back to the host. When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on the input file descriptor and set SPLICE_F_NONBLOCK for the next call to splice(). If splice() was blocked waiting on data from the input FIFO, after SIGINT splice() restarts with the same arguments (no SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no data is available. This differs from the splice() behavior when reading from a vsocket or when we're doing a traditional read()/write() loop (trace-cmd's --nosplice argument). With this patch applied we get the same behavior in all situations after setting O_NONBLOCK which also matches the behavior of doing a read()/write() loop instead of splice(). This change does have potential of breaking users who don't expect EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2]. [1] https://github.com/skaslev/trace-cmd/tree/vsock [2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 04 Mar, 2019 13 commits
-
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Assorted fixes that sat in -next for a while, all over the place" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: Fix locking in aio_poll() exec: Fix mem leak in kernel_read_file copy_mount_string: Limit string length to PATH_MAX cgroup: saner refcounting for cgroup_root fix cgroup_do_mount() handling of failure exits
-
Arnd Bergmann authored
The label is only used from inside the #ifdef and should be hidden the same way, to avoid this warning: net/sched/act_tunnel_key.c: In function 'tunnel_key_init': net/sched/act_tunnel_key.c:389:1: error: label 'release_tun_meta' defined but not used [-Werror=unused-label] release_tun_meta: Fixes: 41411e2f ("net/sched: act_tunnel_key: Add dst_cache support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
When CONFIG_SYSCTL is turned off, we get a link failure for the newly introduced tuning knob. net/ipv6/addrconf.o: In function `addrconf_init_net': addrconf.c:(.text+0x31dc): undefined reference to `sysctl_devconf_inherit_init_net' Add an IS_ENABLED() check to fall back to the default behavior (sysctl_devconf_inherit_init_net=0) here. Fixes: 856c395c ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
MDIO_BUS_MUX can only be selected if OF_MDIO is already turned on: WARNING: unmet direct dependencies detected for MDIO_BUS_MUX Depends on [n]: NETDEVICES [=y] && MDIO_BUS [=m] && OF_MDIO [=n] Selected by [m]: - MDIO_BUS_MUX_MULTIPLEXER [=m] && NETDEVICES [=y] && MDIO_BUS [=m] && OF [=y] Fixes: 7865ad65 ("drivers: net: phy: mdio-mux: Add support for Generic Mux controls") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
As can be seen from the usage of the return value, we should use phy_modify_mmd_changed() here. Fixes: 9a5dc8af ("net: phy: add genphy_c45_an_config_aneg") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
In the original patch I missed to add mv88e6xxx_ports_cmode_init() to the second probe function, the one for the new DSA framework. Fixes: ed8fe202 ("net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode") Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Souptick Joarder authored
Remove duplicate header which is included twice. Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kai-Heng Feng authored
Some sky2 chips fire IRQ after S3, before the driver is fully resumed: [ 686.804877] do_IRQ: 1.37 No irq handler for vector This is likely a platform bug that device isn't fully quiesced during S3. Use MSI-X, maskable MSI or INTx can prevent this issue from happening. Since MSI-X and maskable MSI are not supported by this device, fallback to use INTx on affected platforms. BugLink: https://bugs.launchpad.net/bugs/1807259 BugLink: https://bugs.launchpad.net/bugs/1809843Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eran Ben Elisha says: ==================== Devlink health updates This patchset includes a fix [patch 01] to the devlink health state update, in case recover was aborted. In addition, it includes a small enhancement to the infrastructure in order to allow direct state update in run-time, and use it from mlx5e tx reporter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eran Ben Elisha authored
Once channels were successfully opened, update tx reporter health state to healthy. This is needed for the following scenario: - SQ has an un-recovered error reported to the devlink health, resulting tx reporter state to be error. - Current channels (including this SQ) are closed - New channels are opened After that flow, the original error was "solved", and tx reporter state should be healthy. However, as it was resolved as a side effect, and not via tx reporter recover method, driver needs to inform devlink health about it. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eran Ben Elisha authored
It is possible that a reporter state will be updated due to a recover flow which is not triggered by a devlink health related operation, but as a side effect of some other operation in the system. Expose devlink health API for a direct update of a reporter status. Move devlink_health_reporter_state enum definition to devlink.h so it could be used from drivers as a parameter of devlink_health_reporter_state_update. In addition, add trace_devlink_health_reporter_state_update to provide user notification for reporter state change. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eran Ben Elisha authored
If devlink_health_report() aborted the recover flow due to grace period checker, it left the reporter status as DEVLINK_HEALTH_REPORTER_STATE_HEALTHY, which is a bug. Fix that by always setting the reporter state to DEVLINK_HEALTH_REPORTER_STATE_ERROR prior to running the checker mentioned above. In addition, save the previous health_state in a temporary variable, then use it in the abort check comparison instead of using reporter->health_state which might be already changed. Fixes: c8e1da0b ("devlink: Add health report functionality") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-