Merge tag 'tegra-for-4.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Merge "ARM: tegra: Device tree changes for v4.8-rc1" from Thierry Reding:

Some cleanups to existing device tree sources and add Toradex Apalis TK1
support.

* tag 'tegra-for-4.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Initial support for Apalis TK1
  ARM: tegra: Remove commas from unit addresses on Tegra124
  ARM: tegra: Import latest Jetson TK1 spreadsheet
  ARM: tegra: Add spaces around = in properties
  ARM: tegra: Fix a couple of DTC warnings

This patch adds the device tree to support Toradex Apalis TK1 a
computer on module which can be used on different carrier boards.

The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L
RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor
chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec.
Furthermore, there is a Kinetis MK20DN512 companion micro controller for
analogue, CAN and resistive touch functionality which is not yet
supported. Anything that is not self contained on the module is disabled
by default.

The device tree for the Evaluation Board includes the module's device
tree and enables the supported peripherals of the carrier board (the
Evaluation Board supports almost all of them).
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Remove commas from unit addresses as suggested by Rob Herring upon me
posting initial Apalis TK1 support:

	http://article.gmane.org/gmane.linux.ports.tegra/26608

Please keep the remaining 0, notation on the GPU node in place as a
former mainline U-Boot version was looking for that particular notation
in order to perform required fix-ups on it.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This imports v11 of "Jetson TK1 Development Platform Pin Mux" from
https://developer.nvidia.com/embedded/downloads.

The new version defines the mux option for the MIPI pad ctrl selection.
The OWR pin no longer has an entry in the configuration table because
the only mux option it support is OWR, that feature isn't supported, and
hence can't conflict with any other pin. This pin can only usefully be
used as a GPIO.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This seems to have been copied and pasted since the beginning of time,
though only until Tegra124, likely because that DT was written from
scratch or it was fixed along the way.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add unit-addresses to nodes that have a reg property to avoid warnings
on newer versions of DTC.
Signed-off-by: Thierry Reding <treding@nvidia.com>

This device-tree pxa update brings :
 - pin control nodes for pxa2xx and pxa3xx
 - the LCD controller for pxa2xx
 - the missing pxa3xx pulse width modulator nodes
 - an USB Host fix for pxa3xx

* tag 'pxa-dt-4.7' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa3xx: add pincontrol helpers
  ARM: dts: pxa: add pinctrl to pxa3xx
  ARM: dts: pxa: fix the ohci clock for pxa3xx
  ARM: dts: add pincontroller to pxa27x
  ARM: dts: pxa: add pxa3xx pwm nodes
  ARM: dts: pxa: add pxa framebuffer device
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "additional Broadcom ARM-based SoC Device Tree changes" from Florian Fainelli:

- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
  their proper information about the on-board USB Ethernet adapter so there is
  appropriate binding between this USB device and a device_node (useful for MAC
  address fetching and stuff)

- Raveendra adds the ADC controller Device Tree nodes to the Cygnus SoC device
  tree include files

- Rafal updates the BCM5301x Device Tree by separating how we specify the NAND
  chip-select information in a first change and then fixes the NAND controller
  ECC configuration for the D-Link DIR-885L

- Florian adds support for the BCM953012ER reference board, adds the HW random
  number generator DT node and adds proper memory node information to the
  BCM958625HR reference board

* tag 'arm-soc/for-4.8/devicetree-part2' of http://github.com/Broadcom/stblinux:
  ARM: dts: NSP: Specify RAM amount for BCM958625HR board
  ARM: BCM5301X: Fix NAND ECC parameters for D-Link DIR-885L
  ARM: BCM5301X: Specify NAND chip select and ECC in separated files
  ARM: dts: Cygnus: Add Broadcom iproc-static-adc DT node
  ARM: dts: BCM5301x: Add BCM953012ER board
  ARM: dts: BCM5301x: Add RNG Device Tree node
  ARM: bcm2835: dt: Add the ethernet to the device trees

Merge "ARM: DT: Hisilicon ARMv7 SoC Hi3519 DT updates for 4.8" from Wei Xu:

- Add device tree bindings for hi3519 sysctrl
- Add dts files for hi3519
- Tidy up DTB makefile entries to keep the list sorted

* tag 'hisi-armv7-soc-dt-for-4.8-v2' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: add dts files for Hi3519 and tidy up the makefile entries
  ARM: dt-bindings: add device tree bindings for Hi3519 sysctrl

Merge tag 'sunxi-dt-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner DT changes for 4.8" from Maxime Ripard:

The usual amount of DT patches, among which:
  - I2S support
  - Support for the AXP809 in the relevant boards (A80 based)
  - New boards: Banapi M1+, Banapi M2+, Allwinner Parrot (R16 EVB),
  - The other patches to enable various controllers on our boards, most
    notably USB OTG

* tag 'sunxi-dt-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (54 commits)
  ARM: dts: sun5i: Enable otg on the auxtex t004
  ARM: sun5i: Allow PLL3 2x fixed factor clock to change PLL3 rate
  ARM: sun7i: Add DAI nodes
  ARM: sun7i: Add mod1 clock nodes
  ARM: dts: sun5i: Add mmc1 / sdio-wifi node to mk802
  ARM: dts: sun5i: Add axp152 pmic node to mk802
  ARM: dts: sun5i: Enable otg on the mk802
  ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board
  ARM: sun8i: Add Parrot Board DTS
  ARM: dts: sun5i: q8-common: Enable USB-based WiFi
  ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board
  ARM: dts: sun8i-q8-common: Add support for USB wifi controllers
  ARM: dts: sun9i: a80-optimus: Order nodes by alphabetical order
  ARM: dts: sun9i: cubieboard4: Order nodes by alphabetical order
  ARM: dts: sun7i: Add NFC node to Allwinner A20 SoC
  ARM: dts: sun4i: Add NFC node to Allwinner A10 SoC
  ARM: dts: sun6i: Add pmic / regulator nodes to Mele M9 dts
  ARM: dts: sun6i: Add pmic / regulator nodes to Mele A1000G quad dts
  ARM: dts: sun6i: The blue led on the Mele M9 is a power led
  ARM: dts: sun6i: The blue led on the Mele A1000G quad is a power led
  ...

- Fix the I2C address and supply line names for the AK8974

- Sets up the interrupt lines to the different components as they
  actually are connected, I was confused for some time by the fact
  that several lines were connected with <NM> 0 Ohm resistors, which
  means NOT MOUNTED and is thus not 0 Ohm at all but infinite ohms,
  i.e. not connected at all.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-4.8-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

dt-bindings: tegra: Updates for v4.8-rc1

A couple of fixes for the Tegra XUSB controller and Tegra XUSB pad
controller bindings, as well as the addition of some compatible strings
for Tegra-based boards.

* tag 'tegra-for-4.8-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra: Add Apalis TK1 device tree binding documentation
  dt-bindings: tegra: Add Colibri T30 device tree binding documentation
  dt-bindings: usb: Fix Tegra XUSB example
  dt-bindings: phy: Fix description of Tegra210 PHY nodes
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Audio support and spi-flash on rk3288-veyron Chromedevices
as well as i2s and ethernet support on rk3228/rk3229 devices
and a dts file for the rk3229 eval board.

* tag 'v4.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add support rk3229 evb board
  ARM: dts: rockchip: add GMAC nodes for RK322x SoCs
  ARM: dts: rockchip: add i2s nodes for RK322x SoCs
  ARM: dts: rockchip: rename rk3228.dtsi to rk322x.dtsi
  clk: rockchip: add clock-ids for rk3228 MAC clocks
  clk: rockchip: add clock-ids for rk3228 audio clocks
  ARM: dts: rockchip: rename i2s model for Veyron devices
  ARM: dts: rockchip: move rk3288 io-domain nodes to the grf
  ARM: dts: rockchip: Enable analog audio on rk3288-veyron chromebooks
  ARM: dts: rockchip: Add shared file for audio on rk3288-veyron boards
  ARM: dts: rockchip: add SPI flash node for rk3288-veyron
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.8

* Use APMU on R-Car Gen2 and provide SMP for r8a7793 SoC
* Update console parameters to uniformly use chosen/stdout-path,
  serial0, not provide kernel unnecessary command line parameters
* Add DU pins to silk board
* Add support for blanche/r8a7792
* Name pfc subnodes after device name

* tag 'renesas-dt2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (41 commits)
  ARM: dts: r8a7792: add SMP support
  ARM: dts: r8a7793: Add APMU node and second CPU core
  ARM: dts: r8a7791: Add APMU node
  ARM: dts: r8a7790: Add APMU nodes
  devicetree: bindings: Renesas APMU and SMP Enable method
  ARM: dts: kzm9g: Update console parameters
  ARM: dts: kzm9d: Update console parameters
  ARM: dts: marzen: Add serial port config to chosen/stdout-path
  ARM: dts: genmai: Update console parameters
  ARM: dts: armadillo800eva: Update console parameters
  ARM: dts: r8a7792: add JPU support
  ARM: dts: r8a7792: add JPU clocks
  ARM: dts: silk: add DU pins
  ARM: dts: blanche: add Ethernet support
  ARM: dts: blanche: initial device tree
  ARM: dts: blanche: document Blanche board
  ARM: dts: r8a7792: add IRQC support
  ARM: dts: r8a7792: add [H]SCIF support
  ARM: dts: r8a7792: add SYS-DMAC support
  ARM: dts: r8a7792: initial SoC device tree
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Add 512MB of memory starting at physical offset 0x6000_0000.

Fixes: 65e9ac208c8e ("ARM: dts: NSP: Add new DT file for bcm958625hr")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This device uses BCH-1 instead of BCH-8. This fixes ECC errors and makes
NAND usable with brcmnand.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Using separated file with common chip select parameters will allow us
adding other ECC setups without code duplication.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This adds the Cirrus Logic EP7209,EP7211 DT templates and support for
EDB7211 Development board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

- add dts files for Hi3519
- shuffle ARCH_HIGHBANK, ARCH_HISI, ARCH_HIX5HD2 and ARCH_HIP0X
  around to keep the list sorted
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Merge tag 'samsung-drivers-exynos-mfc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Topic branch for Exynos MFC changes for v4.8, part 2:

Replace hardcoded reserved memory ranges with auto-allocated ones
and enable MFC for all boards.

* tag 'samsung-drivers-exynos-mfc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: enable MFC device for all boards
  ARM: dts: exynos: move MFC reserved memory regions from boards to .dtsi
  ARM: dts: exynos: replace hardcoded reserved memory ranges with auto-allocated ones
  ARM: dts: exynos: Enable MFC device on Exynos4412 Odroid boards
  ARM: dts: exynos: Convert MFC device to generic reserved memory bindings
  ARM: EXYNOS: Remove code for MFC custom reserved memory handling
  media: s5p-mfc: add iommu support
  media: s5p-mfc: replace custom reserved memory handling code with generic one
  media: s5p-mfc: use generic reserved memory bindings
  of: reserved_mem: add support for using more than one region for given device
  media: set proper max seg size for devices on Exynos SoCs
  media: vb2-dma-contig: add helper for setting dma max seg size
  s5p-mfc: Fix race between s5p_mfc_probe() and s5p_mfc_open()
  s5p-mfc: Add release callback for memory region devs
  s5p-mfc: Set device name for reserved memory region devs
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.8/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Second set of device tree updates for omaps for v4.8 merge window.
This is a series of dtc warning fixes when compiled with make W=2
from Javier Martinez Canillas <javier@osg.samsung.com>.

* tag 'omap-for-v4.8/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
  ARM: dts: am57xx: sbc-am57x: remove unneded unit name
  ARM: dts: omap5-board-common: remove unneded unit names
  ARM: dts: omap5-cm-t54: remove unneded unit names and add reg properties
  ARM: dts: am437x: cm-t43: remove unneded unit names
  ARM: dts: am437x-gp-evm: remove unneded unit name
  ARM: dts: am43xx-epos-evm: remove unneded unit name
  ARM: dts: omap4-var-om44customboard: remove unneded unit name
  ARM: dts: omap4-sdp: remove unneded unit names
  ARM: dts: omap4-panda-common: remove unneded unit names
  ARM: dts: omap4-duovero-parlor: remove unneded unit name
  ARM: dts: omap3-thunder: remove unneded unit name
  ARM: dts: sbc-t3x30: remove unneded unit names
  ARM: dts: omap3-pandora-common: remove unneded unit name
  ARM: dts: omap3-overo-common-dvi: remove unneded unit names
  ARM: dts: omap3-igep0020-common: remove unneded unit names
  ARM: dts: omap3: overo: remove unneded unit names in display nodes
  ARM: dts: omap3-ha-lcd: remove unneeded unit name
  ARM: dts: omap3-gta04: remove unneeded unit names
  ARM: dts: omap3-devkit8000-lcd-common: remove unneeded unit names
  ARM: dts: omap3-devkit8000: remove unneeded unit names
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

The i.MX device tree update for 4.8:
 - Add two i.MX23/STMP3780 based MP3 player device support, Creative
   X-Fi3 and SanDisk Sansa Fuze+
 - Add the support of Auvidea H100 device which is a SolidRun MicroSOM
   baseboard
 - Restructure i.MX7Dual DTS files to support i.MX7Solo and add Toradex
   Colibri iMX7S/iMX7D boards
 - Device additions and enabling for various boards: mmc device for
   utilite-pro, IRQ controller and CAN support for TS-4800, display and
   touchscreen support for imx7d-sdb, SAI audio and LCD support for
   imx6ul-14x14-evk, gpio power off support for imx6q-bx50v3, etc.
 - Update the boards from Freescale/NXP to use WDOG_B pin for reset
 - PCI reset polarity correction for imx6qdl-sabresd and imx6q-tbs2910
 - Update i.MX board dts files to use generic uart-has-rtscts DT
   property instead of vendor specific one
 - DTC warning fixing for a few boards which are mostly mismatch between
   unit-address and reg property
 - Remove SION setting from all mux modes on i.MX25

* tag 'imx-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
  ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support
  ARM: dts: imx7d: move input header into base device tree
  ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics
  ARM: dts: imx7d: use imx7s.dtsi as base device tree
  ARM: dts: imx7d-sdb: Add support for touchscreen
  ARM: dts: imx7d-sdb: Add display support
  ARM: dts: imx7d: Add SPI support
  ARM: dts: imx6q-bx50v3: Add gpio power off support
  ARM: dts: imx6ul-pico-hobbit: Fix Ethernet PHY reset GPIO
  ARM: dts: imx6q-tbs2910: fix pcie reset polarity
  ARM: dts: imx6sx-sdb: Use WDOG_B pin reset
  ARM: dts: imx6ul-evk: Use WDOG_B pin reset
  ARM: dts: imx7d-sdb: Use WDOG_B pin reset
  ARM: dts: imx6qdl-sabresd: Use WDOG_B pin reset
  ARM: dts: utilite-pro: add mmc card slot support
  ARM: dts: imx6q-cm-fx6: fix the operation points
  ARM: dts: imx6qdl.dtsi: add "arm,shared-override" for pl310
  ARM: imx25-pinfunc: remove SION from all modes
  ARM: imx25-pinfunc: document SION being important for MX25_PAD_SD1_CMD__SD1_CMD
  ARM: dts: ls1021a: Add dis_rxdet_inp3_quirk property to USB3 node
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request brings in the change to describe the ethernet in the
DT so that the firmware can tell us its MAC address.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This patch adds the DT node for Broadcom's iproc-static-adc
controller driver.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The auxtek t004 has its otg usb vbus hardwired to 5v (likely in case
people use it to power the board instead of the dedicated power micro
usb connector), it does have an id pin, so it allows full otg
functionality.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Merge tag 'qcom-dt-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Qualcomm Device Tree Changes for v4.8

* Reverse BAM dma node reverts
* Add BAM remote control options for affected platforms
* Enable peripherals on APQ8074 dragonboard
* Enable PMA8084 pwrky
* Fix PMIC reg entries by removing unnecessary size element
* Add SCM binding and support for all currently supported boards
* Add Qualcomm WCNSS binding documentation
* Rename db600c to SD_600eval and add peripheral nodes
* Remove gpio key entry from Nexus7
* Add APQ8060 based dragonboard and associated peripherals
* Add ARMv7 PMU for IPQ4019
* Update smem state cells to match documentation

* tag 'qcom-dt-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (26 commits)
  dts: ipq4019: support ARMv7 PMU
  ARM: dts: add Qualcomm APQ8060-based Dragonboard
  ARM: dts: move the fixed MMC regulator to SURF board
  ARM: dts: fix the MSM8660 RTC base address
  ARM: dts: add I2C block in GSBI12
  ARM: dts: add L2CC and RPM with regulators for MSM8660
  ARM: dts: add SDCC5 to Qualcomm MSM8660
  ARM: dts: add GPIO and MPP to MSM8660 PMIC
  device-tree: nexus7: Remove power gpio key entry and use pmic8xxx-pwrkey
  arm: dts: qcom: Update smem state cells usage
  ARM: dts: qcom: msm8974-honami: Set DMA as remotely controlled
  ARM: dts: sd_600eval: Fix eMMC lockup issue
  ARM: dts: apq8064: rename db600c to SD_600eval
  ARM: dts: apq8064: move sdcc3 pinctrls out of baord file
  ARM: dts: apq8064: move sdcc1 pinctrl nodes to soc file
  dt: binding: Add Qualcomm WCNSS control binding
  dts: qcom: apq8064: Add SCM firmware node
  dts: qcom: msm8974: Add SCM firmware node
  dts: qcom: apq8084: Add SCM firmware node
  dt/bindings: firmware: Add Qualcomm SCM binding
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.8/dt-part1-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.8 merge window:

- PWM binding updates and related dts changes
- OCM RAM updates for dra7
- Enable n900 lirc-rx51 driver
- omap3-gta04 updates for backlight, bma180, itg3200, hmc5843 and wifi
- am335x, am437x and am57xx operating point updates and additions
- am335x-icev2 pca9536 node
- dra72-evm regulator updates
- edma spelling fixes
- am335x and am437x ethernet phy update
- a series of mcbsp updates
- omap3-gta04 eeprom
- dra7 PCIe unit address fix
- stdout-path for beaglebone variants
- crypto accelerator nodes for am335x, am437x and dra7

* tag 'omap-for-v4.8/dt-part1-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (42 commits)
  ARM: dts: AM43xx: Add node for RNG
  ARM: dts: AM43xx: clk: Add RNG clk node
  ARM: dts: DRA7: Add DT node for RNG IP
  ARM: dts: DRA7: Add support for SHA IP
  ARM: dts: DRA7: Add DT nodes for AES IP
  ARM: dts: DRA7: Add DT node for DES IP
  ARM: dts: am335x-bone-common: use stdout-path in Beaglebone boards.
  ARM: dts: DRA7: fix unit address of second PCIe instance
  ARM: dts: omap3-gta04: Add RFID eeprom node
  ARM: dts: omap4-duovero: Add pdmclk binding for audio
  ARM: dts: omap4-var-som-om44: Add pdmclk binding for audio
  ARM: dts: omap4-sdp: Add pdmclk binding for audio
  ARM: dts: omap4-panda-common: Add pdmclk binding for audio
  ARM: dts: omap5-board-common: Add pdmclk binding for audio
  ARM: dts: omap3: Add clocks to McBSP nodes
  ARM: dts: am335x-bone-common: Mark MAC as having only one PHY
  ARM: dts: am437x-idk-evm: Mark MAC as having only one PHY
  ARM: dts: Correct misspelling, "emda3" -> "edma3"
  ARM: dts: dra72-evm: Rename 3.3V regulator tag
  ARM: dts: am335x-icev2: Add DT node for TI PCA9536
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.8-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT Changes for 4.8 #2:
 - New board: at91sam9260ek
 - Fixes for the sam9_l9260
 - Sama5d2 Xplained PMIC fix
 - Addition of the PMU node for the sama5d2

* tag 'at91-ab-4.8-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: sama5d2_xplained: Update the pmic node
  ARM: dts: at91: sama5d2: add PMU node
  ARM: dts: at91: sam9_l9260: Modify information in LED nodes.
  ARM: dts: at91: sam9_l9260: Add pinctrl information to ethernet node.
  ARM: dts: at91: add at91sam9260ek board DT
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone_dts_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

ARM: Keystone DTS update for 4.8

	- Pinmux entries for K2G
	- PCI DTS entry fixup

* tag 'keystone_dts_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: k2g-evm: Add pinmuxing for UART0
  ARM: dts: keystone: Header file for pinctrl constants
  ARM: dts: k2g: Add pinctrl support
  ARM: dts: keystone-k2l: Add pinctrl node
  ARM: dts: keystone: add interrupt property to PCI controller bindings
  ARM: dts: keystone: remove bogus IO resource entry from PCI binding
Signed-off-by: Olof Johansson <olof@lixom.net>

In order to be able to properly generate its pixel clock, the pll3-2x fixed
factor needs to be able to change the PLL3 rate too.

Add the needed extra compatible so that it behaves that way.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add the new DAI blocks to the device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

This commit adds all the mod1 clocks available on A20 to its device
tree. This list was created by looking at the A20 user manual.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The a10s mk802 uses a rtl8189es sdio wifi chip, add a node enabling
the mmc1 controller, this enables using the wifi chip (together with
an out of tree sdio driver for it).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add a node describing the axp152 pmic to the mk802 dts, note there are
no regulator nodes as we do not yet support the regulators on the
axp152.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Enable the otg controller, the id pin is not connected so enable
it in peripheral only mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Now that we have a proper binding for Ethernet switches hanging off
different buses, and a driver for the BCM53125 switch, add its Device
Tree as a child MDIO node, at MDIO address 30 (Broadcom pseudo-PHY
address) and describe the ports layout of the Lamobo R1 board.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Parrot Board is an evaluation board with an Allwinner R16 (assumed
to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host
and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2
controllable buttons, an LVDS port with separated backlight and
capacitive touch panel ports, an audio/microphone jack, a camera CSI
port, 2 sets of 22 GPIOs and an accelerometer.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The early A13 Q8 tablets all use a Realtek WiFi module connected to
USB1. The module is powered by AXP209's LDO3 at 3.3V.

Move the related settings from sun5i-a13-q8-tablet.dts to
sun5i-q8-common.dtsi, for all q8-based tablets.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add support for the Bananapi M1 Plus A20 development board from
sinovoip.com.cn . This board is nearly a clone of the Lemaker's
Bananapro, but differ with the wlan chipset connection and i2s pinout.
And I also enable the integrated audio codec on default.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Some of the sun8i q8 boards have an usb wifi controller, on other
variants this will result in an used usb root-hub, but the best
way to deal with wifi on this boards is to simply let the kernel
auto-detect usb or sdio wifi controllers.

This has been tested on an a23 based q8 tablet with a RTL8188ETV wifi
controller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>