Skip to content

L
linux
Switch branch/tag
  1. 18 Nov, 2008 4 commits
    • Joerg Roedel's avatar
      x86: default to SWIOTLB=y on x86_64 · a1afd01c
      Joerg Roedel authored 
      Impact: fixes korg bugzilla 11980

A kernel for a 64bit x86 system should always contain the swiotlb code
in case it is booted on a machine without any hardware IOMMU supported
by the kernel and more than 4GB of RAM. This patch changes Kconfig to
always compile swiotlb into the kernel for x86_64.
Signed-off-by: default avatarJoerg Roedel <joerg.roedel@amd.com>
Cc: stable@kernel.org
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      a1afd01c
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 · 4e14e833
      Linus Torvalds authored 
      * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  prevent cifs_writepages() from skipping unwritten pages
  Fixed parsing of mount options when doing DFS submount
  [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch
  [CIFS] Fix build break
  cifs: reinstate sharing of tree connections
  [CIFS] minor cleanup to cifs_mount
  cifs: reinstate sharing of SMB sessions sans races
  cifs: disable sharing session and tcon and add new TCP sharing code
  [CIFS] clean up server protocol handling
  [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix
  [CIFS] Fix cifs reconnection flags
  [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error
      4e14e833
    • Dave Kleikamp's avatar
      prevent cifs_writepages() from skipping unwritten pages · b066a48c
      Dave Kleikamp authored 
      Fixes a data corruption under heavy stress in which pages could be left
dirty after all open instances of a inode have been closed.

In order to write contiguous pages whenever possible, cifs_writepages()
asks pagevec_lookup_tag() for more pages than it may write at one time.
Normally, it then resets index just past the last page written before calling
pagevec_lookup_tag() again.

If cifs_writepages() can't write the first page returned, it wasn't resetting
index, and the next call to pagevec_lookup_tag() resulted in skipping all of
the pages it previously returned, even though cifs_writepages() did nothing
with them.  This can result in data loss when the file descriptor is about
to be closed.

This patch ensures that index gets set back to the next returned page so
that none get skipped.
Signed-off-by: default avatarDave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: default avatarJeff Layton <jlayton@redhat.com>
Cc: Shirish S Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: default avatarSteve French <sfrench@us.ibm.com>
      b066a48c
    • Igor Mammedov's avatar
      Fixed parsing of mount options when doing DFS submount · 2c55608f
      Igor Mammedov authored 
      Since these hit the same routines, and are relatively small, it is easier to review
them as one patch.

Fixed incorrect handling of the last option in some cases
Fixed prefixpath handling convert path_consumed into host depended string length (in bytes)
Use non default separator if it is provided in the original mount options
Acked-by: default avatarJeff Layton <jlayton@redhat.com>
Signed-off-by: default avatarIgor Mammedov <niallain@gmail.com>
Signed-off-by: default avatarSteve French <sfrench@us.ibm.com>
      2c55608f
  3. 17 Nov, 2008 12 commits
  5. 16 Nov, 2008 16 commits
  7. 15 Nov, 2008 8 commits
    • Ron Madrid's avatar
      phy: Add support for Marvell 88E1118 PHY · 605f196e
      Ron Madrid authored 
      This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things.
Signed-off-by: default avatarRon Madrid <ron_madrid@sbcglobal.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      605f196e
    • Yevgeny Petrilin's avatar
      mlx4_en: Pause parameters per port · d53b93f2
      Yevgeny Petrilin authored 
      Before the change the driver reported the same pause parameters
for all the ports, even only one of them was modified.
Signed-off-by: default avatarYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d53b93f2
    • Linus Torvalds's avatar
      Linux 2.6.28-rc5 · 9bf1a244
      Linus Torvalds authored
      9bf1a244
    • Al Viro's avatar
      Fix inotify watch removal/umount races · 8f7b0ba1
      Al Viro authored 
      Inotify watch removals suck violently.

To kick the watch out we need (in this order) inode->inotify_mutex and
ih->mutex.  That's fine if we have a hold on inode; however, for all
other cases we need to make damn sure we don't race with umount.  We can
*NOT* just grab a reference to a watch - inotify_unmount_inodes() will
happily sail past it and we'll end with reference to inode potentially
outliving its superblock.

Ideally we just want to grab an active reference to superblock if we
can; that will make sure we won't go into inotify_umount_inodes() until
we are done.  Cleanup is just deactivate_super().

However, that leaves a messy case - what if we *are* racing with
umount() and active references to superblock can't be acquired anymore?
We can bump ->s_count, grab ->s_umount, which will almost certainly wait
until the superblock is shut down and the watch in question is pining
for fjords.  That's fine, but there is a problem - we might have hit the
window between ->s_active getting to 0 / ->s_count - below S_BIAS (i.e.
the moment when superblock is past the point of no return and is heading
for shutdown) and the moment when deactivate_super() acquires
->s_umount.

We could just do drop_super() yield() and retry, but that's rather
antisocial and this stuff is luser-triggerable.  OTOH, having grabbed
->s_umount and having found that we'd got there first (i.e.  that
->s_root is non-NULL) we know that we won't race with
inotify_umount_inodes().

So we could grab a reference to watch and do the rest as above, just
with drop_super() instead of deactivate_super(), right? Wrong.  We had
to drop ih->mutex before we could grab ->s_umount.  So the watch
could've been gone already.

That still can be dealt with - we need to save watch->wd, do idr_find()
and compare its result with our pointer.  If they match, we either have
the damn thing still alive or we'd lost not one but two races at once,
the watch had been killed and a new one got created with the same ->wd
at the same address.  That couldn't have happened in inotify_destroy(),
but inotify_rm_wd() could run into that.  Still, "new one got created"
is not a problem - we have every right to kill it or leave it alone,
whatever's more convenient.

So we can use idr_find(...) == watch && watch->inode->i_sb == sb as
"grab it and kill it" check.  If it's been our original watch, we are
fine, if it's a newcomer - nevermind, just pretend that we'd won the
race and kill the fscker anyway; we are safe since we know that its
superblock won't be going away.

And yes, this is far beyond mere "not very pretty"; so's the entire
concept of inotify to start with.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Acked-by: default avatarGreg KH <greg@kroah.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8f7b0ba1
    • Huang Weiyi's avatar
      LIS3LV02Dx: remove unused #include <version.h> · 0d3b7100
      Huang Weiyi authored 
      The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/hwmon/lis3lv02d.c

This patch removes the said #include <version.h>.
Signed-off-by: default avatarHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0d3b7100
    • Linus Torvalds's avatar
      Merge branch 'sh/for-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 · 537a2f88
      Linus Torvalds authored 
      * 'sh/for-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: Reorder the SCxTDR write after the TDxE clear.
  sh: __copy_user function can corrupt the stack in case of exception
  sh: Fixed the TMU0 reload value on resume
  sh: Don't factor in PAGE_OFFSET for valid_phys_addr_range() check.
  sh: early printk port type fix
  i2c: fix i2c-sh_mobile rx underrun
  sh: Provide a sane valid_phys_addr_range() to prevent TLB reset with PMB.
  usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB
  fix sci type for SH7723
  serial: sh-sci: fix cannot work SH7723 SCIFA
  sh: Handle fixmap TLB eviction more coherently.
      537a2f88
    • Linus Torvalds's avatar
      Merge branch 'doc-subdirs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs · fab349cc
      Linus Torvalds authored 
      * 'doc-subdirs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
  Create/use more directory structure in the Documentation/ tree.
      fab349cc
    • Martin Schwidefsky's avatar
      Add 'pr_fmt()' format modifier to pr_xyz macros. · d091c2f5
      Martin Schwidefsky authored 
      A common reason for device drivers to implement their own printk macros
is the lack of a printk prefix with the standard pr_xyz macros.
Introduce a pr_fmt() macro that is applied for every pr_xyz macro to the
format string.

The most common use of the pr_fmt macro would be to add the name of the
device driver to all pr_xyz messages in a source file.
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d091c2f5
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7