- 03 Jun, 2009 1 commit
-
-
Tim Bird authored
There's a bug in ring_buffer_discard_commit. The wrong pointer is being compared in order to check if the event can be freed from the buffer rather than discarded (i.e. marked as PAD). I noticed this when I was working on duration filtering. The bug is not deadly - it just results in lots of wasted space in the buffer. All filtered events are left in the buffer and marked as discarded, rather than being removed from the buffer to make space for other events. Unfortunately, when I fixed this bug, I got errors doing a filtered function trace. Multiple TIME_EXTEND events pile up in the buffer, and trigger the following loop overage warning in rb_iter_peek(): again: ... if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10)) return NULL; I'm not sure what the best way is to fix this. I don't know if I should extend the loop threshhold, or if I should make the test more complex (ignore TIME_EXTEND events), or just get rid of this loop check completely. Note that if I implement a workaround for this, then I see another problem from rb_advance_iter(). I haven't tracked that one down yet. In general, it seems like the case of removing filtered events has not been working properly, and so some assumptions about buffer invariant conditions need to be revisited. Here's the patch for the simple fix: Compare correct pointer for checking if an event can be freed rather than left as discarded in the buffer. Signed-off-by:
Tim Bird <tim.bird@am.sony.com> LKML-Reference: <4A25BE9E.5090909@am.sony.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
- 02 Jun, 2009 10 commits
-
-
Steven Rostedt authored
A race was found that if one were to enable and disable the function profiler repeatedly, then the system can panic. This was because a profiled function may be preempted just before disabling interrupts. While the profiler is disabled and then reenabled, the preempted function could start again, and access the hash as it is being initialized. This just adds a check in the irq disabled part to check if the profiler is enabled, and if it is not then it will just exit. When the system is disabled, the profile_enabled variable is cleared before calling the unregistering of the function profiler. This unregistering calls stop machine which also acts as a synchronize schedule. [ Impact: fix panic in enabling/disabling function profiler ] Signed-off-by: -
Steven Rostedt authored
The trace_pipe did not recognize the latency format flag and would produce different output than the trace file. The problem was partly due that the trace flags in the iterator was not set as well as the trace_pipe zeros out part of the iterator (including the flags) to be able to use the same routines as the trace file. trace_flags of the iterator should not cause any problems when not zeroed out by for trace_pipe. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Steven Rostedt authored
After converting the softirq tracer to use te flags options, this caused a regression with the name. Since the flag was used directly it was printed out (i.e. HRTIMER_SOFTIRQ). This patch only shows the softirq name without the SOFTIRQ part. [ Impact: fix regression of output from softirq events ] Signed-off-by: -
Steven Whitehouse authored
A patch to allow the use of __print_symbolic and __print_flags from a module. This allows the current GFS2 tracing patch to build. Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> LKML-Reference: <1243868015.29604.542.camel@localhost.localdomain> Signed-off-by:
-
Li Zefan authored
__string() is limited: - it's a char array, but we may want to define array with other types - a source string should be available, but we may just know the string size We introduce __dynamic_array() to break those limitations, and __string() becomes a wrapper of it. As a side effect, now __get_str() can be used in TP_fast_assign but not only TP_print. Take XFS for example, we have the string length in the dirent, but the string itself is not NULL-terminated, so __dynamic_array() can be used: TRACE_EVENT(xfs_dir2, TP_PROTO(struct xfs_da_args *args), TP_ARGS(args), TP_STRUCT__entry( __field(int, namelen) __dynamic_array(char, name, args->namelen + 1) ... ), TP_fast_assign( char *name = __get_str(name); if (args->namelen) memcpy(name, args->name, args->namelen); name[args->namelen] = '\0'; __entry->namelen = args->namelen; ), TP_printk("name %.*s namelen %d", __entry->namelen ? __get_str(name) : NULL __entry->namelen) ); [ Impact: allow defining dynamic size arrays ] Signed-off-by:Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2384D2.3080403@cn.fujitsu.com> Signed-off-by:
-
Li Zefan authored
Currently TP_fast_assign has a limitation that we can't define local variables in it. Here's one use case when we introduce __dynamic_array(): TP_fast_assign( type *p = __get_dynamic_array(item); foo(p); bar(p); ), [ Impact: allow defining local variables in TP_fast_assign ] Signed-off-by:
-
Li Zefan authored
"tsize" should be "\tsize". Also remove the space before "__str_loc". Before: # cat tracing/events/irq/irq_handler_entry/format ... field:int irq; offset:12; size:4; field: __str_loc name; offset:16;tsize:2; ... After: # cat tracing/events/irq/irq_handler_entry/format ... field:int irq; offset:12; size:4; field:__str_loc name; offset:16; size:2; ... [ Impact: standardize __string field description in events format file ] Signed-off-by:Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
Steven Rostedt authored
Both event tracer and sched switch plugin are selected by default by all generic tracers. But if no generic tracer is enabled, their options appear. But ether one of them will select the other, thus it only makes sense to have the default tracers be selected by one option. [ Impact: clean up kconfig menu ] Signed-off-by: -
Steven Rostedt authored
There are two options that are selected by all tracers, but we want to have those options available when no tracer is selected. These are The event tracer and sched switch tracer. The are enabled by all tracers, but if a tracer is not selected we want the options to appear. All tracers including them select TRACING. Thus what we would like to do is: config EVENT_TRACER bool "prompt" depends on TRACING select TRACING But that gives us a bug in the kbuild system since we just created a circular dependency. We only want the prompt to show when TRACING is off. This patch adds GENERIC_TRACER that all tracers will select instead of TRACING. The two options (sched switch and event tracer) will select TRACING directly and depend on !GENERIC_TRACER. This solves the cicular dependency. [ Impact: hide options that are selected by default ] Signed-off-by: -
Steven Rostedt authored
When using ftrace=function on the command line to trace functions on boot up, one can not filter out functions that are commonly called. This patch adds two new ftrace command line commands. ftrace_notrace=function-list ftrace_filter=function-list Where function-list is a comma separated list of functions to filter. The ftrace_notrace will make the functions listed not be included in the function tracing, and ftrace_filter will only trace the functions listed. These two act the same as the debugfs/tracing/set_ftrace_notrace and debugfs/tracing/set_ftrace_filter respectively. The simple glob expressions that are allowed by the filter files can also be used by the command line interface. ftrace_notrace=rcu*,*lock,*spin* Will not trace any function that starts with rcu, ends with lock, or has the word spin in it. Note, if the self tests are enabled, they may interfere with the filtering set by the command lines. Signed-off-by:
-
- 27 May, 2009 2 commits
-
-
Zhaolei authored
"call" is an argument of macro, but it is also used as a local variable name of function in macro. We should keep this local variable name distinct from any CPP macro parameter name if both are in the same macro scope, although it hasn't caused any problem yet. [ Impact: robustify macro ] Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by:
-
Heiko Carstens authored
s390 code uses smp_processor_id() in __raw_spin_lock() code which reveals that a (raw) spinlock is taken without preemption disabled. This can potentially deadlock. To fix this explicitly disable and enable preemption. BUG: using smp_processor_id() in preemptible [00000000] code: cat/2278 caller is trace_find_cmdline+0x40/0xfc CPU: 0 Not tainted 2.6.30-rc7-dirty #39 Process cat (pid: 2278, task: 000000003faedb68, ksp: 000000003b33b988) 000000003b33b988 000000003b33bae0 0000000000000002 0000000000000000 000000003b33bb80 000000003b33baf8 000000003b33baf8 00000000000175d6 0000000000000001 000000003b33b988 000000003f9b0000 000000000000000b 000000000000000c 000000003b33bb40 000000003b33bae0 0000000000000000 0000000000000000 00000000000175d6 000000003b33bae0 000000003b33bb28 Call Trace: ([<00000000000174b2>] show_trace+0x112/0x170) [<0000000000017582>] show_stack+0x72/0x100 [<0000000000441538>] dump_stack+0xc8/0xd8 [<000000000025c350>] debug_smp_processor_id+0x114/0x130 [<00000000000bf0e4>] trace_find_cmdline+0x40/0xfc [<00000000000c35d4>] trace_print_context+0x58/0xac [<00000000000bb676>] print_trace_line+0x416/0x470 [<00000000000bc8fe>] s_show+0x4e/0x428 [<000000000013834e>] seq_read+0x36a/0x5d4 [<0000000000112a78>] vfs_read+0xc8/0x174 [<0000000000112c58>] SyS_read+0x74/0xc4 [<000000000002c7ae>] sysc_noemu+0x10/0x16 [<000002000012436c>] 0x2000012436c 1 lock held by cat/2278: #0: (&p->lock){+.+.+.}, at: [<0000000000138056>] seq_read+0x72/0x5d4 [ Impact: fix preempt-unsafe raw spinlock ] Signed-off-by:Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
-
- 26 May, 2009 8 commits
-
-
Steven Rostedt authored
The recording of the names at trace time is inefficient. This patch implements the softirq event recording to only record the vector and then use the __print_symbolic interface to print out the names. [ Impact: faster recording of softirq events ] Signed-off-by:
-
Steven Rostedt authored
This patch adds __print_symbolic which is similar to __print_flags but works for an enumeration type instead. That is, there is only a one to one mapping between the values and the symbols. When a match is made, then it is printed, otherwise the hex value is outputed. [ Impact: add interface for showing symbol names in events ] Signed-off-by:
-
Steven Rostedt authored
This patch changes the output for gfp_flags from being a simple hex value to the actual names. gfp_flags=GFP_ATOMIC instead of gfp_flags=00000020 And even gfp_flags=GFP_KERNEL instead of gfp_flags=000000d0 (Thanks to Frederic Weisbecker for pointing out that the first version had a bad order of GFP masks) [ Impact: more human readable output from tracer ] Acked-by:
Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by:
-
Steven Rostedt authored
It is useful to see the state of a task that is being switched out. This patch adds the output of the state of the previous task in the context switch event. [ Impact: see state of switched out task in context switch ] Signed-off-by:
-
Steven Rostedt authored
Developers have been asking for the ability in the ftrace event tracer to display names of bits in a flags variable. Instead of printing out c2, it would be easier to read FOO|BAR|GOO, assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7. Some examples where this would be useful are the state flags in a context switch, kmalloc flags, and even permision flags in accessing files. [ v2 changes include: Frederic Weisbecker's idea of using a mask instead of bits, thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS. Li Zefan's idea of allowing the caller of __print_flags to add their own delimiter (or no delimiter) where we can get for file permissions rwx instead of r|w|x. ] [ v3 changes: Christoph Hellwig's idea of using an array instead of va_args. ] [ Impact: better displaying of flags in trace output ] Signed-off-by:
-
Zhaolei authored
Always use ftrace_event_enable_disable() to enable/disable an event so that we can factorize out the event toggling code. [ Impact: factorize and cleanup event tracing code ] Signed-off-by:
-
Zhaolei authored
If we enable a trace event alone without any tracer running (such as function tracer, sched switch tracer, etc...) it can't output enough task command information. We need to use the tracing_{start/stop}_cmdline_record() helpers which are designed to keep track of cmdlines for any tasks that were scheduled during the tracing. Before this patch: # echo 1 > debugfs/tracing/events/sched/sched_switch/enable # cat debugfs/tracing/trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-2289 [000] 526276.724790: sched_switch: task bash:2289 [120] ==> sshd:2287 [120] <...>-2287 [000] 526276.725231: sched_switch: task sshd:2287 [120] ==> bash:2289 [120] <...>-2289 [000] 526276.725452: sched_switch: task bash:2289 [120] ==> sshd:2287 [120] <...>-2287 [000] 526276.727181: sched_switch: task sshd:2287 [120] ==> swapper:0 [140] <idle>-0 [000] 526277.032734: sched_switch: task swapper:0 [140] ==> events/0:5 [115] <...>-5 [000] 526277.032782: sched_switch: task events/0:5 [115] ==> swapper:0 [140] ... After this patch: # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | bash-2269 [000] 527347.989229: sched_switch: task bash:2269 [120] ==> sshd:2267 [120] sshd-2267 [000] 527347.990960: sched_switch: task sshd:2267 [120] ==> bash:2269 [120] bash-2269 [000] 527347.991143: sched_switch: task bash:2269 [120] ==> sshd:2267 [120] sshd-2267 [000] 527347.992959: sched_switch: task sshd:2267 [120] ==> swapper:0 [140] <idle>-0 [000] 527348.531989: sched_switch: task swapper:0 [140] ==> events/0:5 [115] events/0-5 [000] 527348.532115: sched_switch: task events/0:5 [115] ==> swapper:0 [140] ... Changelog: v1->v2: Update Kconfig to select CONTEXT_SWITCH_TRACER in ENABLE_EVENT_TRACING v2->v3: v2 can solve problem that was caused by config EVENT_TRACING alone, but when CONFIG_FTRACE is off and CONFIG_TRACING is selected by other config, compile fail happened again. This version solves it. [ Impact: fix incomplete output of event tracing ] Signed-off-by: -
Pekka Enberg authored
The kmemtrace.enable kernel parameter no longer works. To enable kmemtrace at boot-time, you must pass "ftrace=kmemtrace" instead. [ Impact: remove obsolete kernel parameter documentation ] Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> LKML-Reference: <alpine.DEB.2.00.0905241112190.10296@rocky> Signed-off-by:
-
- 25 May, 2009 2 commits
-
-
Li Zefan authored
When defining a dynamic size string, we add __str_loc_##item to the trace entry, and it stores the location of the actual string in entry->_str_data[] 'unsigned short' should be sufficient to store this information, thus we save 2 bytes per dyn-size string in the ring buffer. [ Impact: reduce memory occupied by dyn-size strings in ring buffer ] Signed-off-by:
-
Lai Jiangshan authored
I found that there is nothing to protect event_hash in ftrace_find_event(). Rcu protects the event hashlist but not the event itself while we use it after its extraction through ftrace_find_event(). This lack of a proper locking in this spot opens a race window between any event dereferencing and module removal. Eg: --Task A-- print_trace_line(trace) { event = find_ftrace_event(trace) --Task B-- trace_module_remove_events(mod) { list_trace_events_module(ev, mod) { unregister_ftrace_event(ev->event) { hlist_del(ev->event->node) list_del(....) } } } |--> module removed, the event has been dropped --Task A-- event->print(trace); // Dereferencing freed memory If the event retrieved belongs to a module and this module is concurrently removed, we may end up dereferencing a data from a freed module. RCU could solve this, but it would add latency to the kernel and forbid tracers output callbacks to call any sleepable code. So this fix converts 'trace_event_mutex' to a read/write semaphore, and adds trace_event_read_lock() to protect ftrace_find_event(). [ Impact: fix possible freed memory dereference in ftrace ] Signed-off-by:Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by:
-
- 20 May, 2009 1 commit
-
-
Ming Lei authored
register_module_notifier() returns zero in the success case. So fix the inverted fail case check in trace events modules handler. [ Impact: fix spurious warning on ftrace initialization] Reported-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
-
- 19 May, 2009 2 commits
-
-
Stefan Raspl authored
debugfs directory entries for devices are not removed on some of the failure pathes in do_blk_trace_setup(). One way to reproduce is to start blktrace on multiple devices with insufficient Vmalloc space: Devices will fail with a message like this: BLKTRACESETUP(2) /dev/sdu failed: 5/Input/output error If so, the respective entries in debugfs (e.g. /sys/kernel/debug/block/sdu) will remain and subsequent attempts to start blktrace on the respective devices will not succeed due to existing directories. [ Impact: fix /debug/tracing file cleanup corner case ] Signed-off-by:
Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Acked-by:
Ingo Molnar <mingo@elte.hu>
-
Li Zefan authored
- fix some typos - document the difference between '>' and '>>' - document the 'enable' toggle - remove section "Defining an event-enabled tracepoint", since it's out-dated and sample/trace_events/ already serves this purpose. v2: add "Updated by Li Zefan" [ Impact: make documentation up-to-date ] Signed-off-by:
-
- 18 May, 2009 2 commits
-
-
Ming Lei authored
return zero should be correct, so fix it. [ Impact: eliminate incorrect syslog message ] Signed-off-by:
-
Ingo Molnar authored
Merge reason: we were on an -rc4 base, sync up to -rc6 Signed-off-by:
-
- 16 May, 2009 1 commit
-
-
Linus Torvalds authored
-
- 15 May, 2009 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI MSI: Fix MSI-X with NIU cards PCI: Fix pci-e port driver slot_reset bad default return value
-
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6: Bluetooth: Don't trigger disconnect timeout for security mode 3 pairing Bluetooth: Don't use hci_acl_connect_cancel() for incoming connections Bluetooth: Fix wrong module refcount when connection setup fails Another case of me handling the fallout from Davem's unfortunate addiction to shuffleboard. Won't anybody think of the children? Join the anti-shuffleboard league today!
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl. drm/i915: Set HDMI hot plug interrupt enable for only the output in question. drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS. drm/i915: Use the GM45 VGA hotplug workaround on G45 as well. drm/i915: ignore LVDS on intel graphics systems that lie about having it drm/i915: sanity check IER at wait_request time drm/i915: workaround IGD i2c bus issue in kernel side (v2) drm/i915: Don't allow binding objects into the last page of the aperture. drm/i915: save/restore fence registers across suspend/resume drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Media rotation rate and form factor heuristics libata: Report disk alignment and physical block size sata_fsl: Fix the command description of FSL SATA controller sata_fsl: Fix compile warnings [libata] sata_sx4: fixup interrupt handling [libata] sata_sx4: convert to new exception handling methods
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6: iwlwifi: fix device id registration for 6000 series 2x2 devices ath5k: update channel in sw state after stopping RX and TX rtl8187: use DMA-aware buffers with usb_control_msg mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel airo: airo_get_encode{,ext} potential buffer overflow Pulled directly by Linus because Davem is off playing shuffle-board at some Alaskan cruise, and the NULL ptr deref issue hits people and should get merged sooner rather than later. David - make us proud on the shuffle-board tournament!
-
Martin K. Petersen authored
This patch provides new heuristics for parsing both the form factor and media rotation rate ATA IDENFITY words. The reported ATA version must be 7 or greater and the device must return values defined as valid in the standard. Only then are the characteristics reported to SCSI via the VPD B1 page. This seems like a reasonable compromise to me considering that we have been shipping several kernel releases that key off the rotation rate bit without any version checking whatsoever. With no complaints so far. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Martin K. Petersen authored
For disks with 4KB sectors, report the correct block size and alignment when filling out the READ CAPACITY(16) response. This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I fixed the bug I reported a while back caused by ATA and SCSI using different approaches to describing the alignment. Signed-off-by:
-
Dave Liu authored
The bit 11 of command description is reserved bit in Freescale SATA controller and needs to be set to '1'. This is needed to make sure the last write from the controller to the buffer descriptor is seen before an interrupt is raised. Signed-off-by:
Dave Liu <daveliu@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Kumar Gala authored
We we build with dma_addr_t as a 64-bit quantity we get: drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg': drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' Signed-off-by:
-
David Milburn authored
Issuing ATA_CMD_SET_FEATURES (0xef) times out because pdc20621_interrupt ignores command completion since ATA_TFLAG_POLLING flag is set. This has already been fixed for sata_promise: commit 51b94d2a Author: Tejun Heo <htejun@gmail.com> Date: Fri Jun 8 13:46:55 2007 -0700 sata_promise: use TF interface for polling NODATA commands Also, this patch includes Mikael's original patches: http://marc.info/?l=linux-ide&m=121135828227724&w=2 http://marc.info/?l=linux-ide&m=121144512109826&w=2Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Signed-off-by:
David Milburn <dmilburn@redhat.com> Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
-
