- 08 Mar, 2019 40 commits
-
-
Roman Penyaev authored
The goal of this patch is to reduce contention of ep_poll_callback() which can be called concurrently from different CPUs in case of high events rates and many fds per epoll. Problem can be very well reproduced by generating events (write to pipe or eventfd) from many threads, while consumer thread does polling. In other words this patch increases the bandwidth of events which can be delivered from sources to the poller by adding poll items in a lockless way to the list. The main change is in replacement of the spinlock with a rwlock, which is taken on read in ep_poll_callback(), and then by adding poll items to the tail of the list using xchg atomic instruction. Write lock is taken everywhere else in order to stop list modifications and guarantee that list updates are fully completed (I assume that write side of a rwlock does not starve, it seems qrwlock implementation has these guarantees). The following are some microbenchmark results based on the test [1] which starts threads which generate N events each. The test ends when all events are successfully fetched by the poller thread: spinlock ======== threads events/ms run-time ms 8 6402 12495 16 7045 22709 32 7395 43268 rwlock + xchg ============= threads events/ms run-time ms 8 10038 7969 16 12178 13138 32 13223 24199 According to the results bandwidth of delivered events is significantly increased, thus execution time is reduced. This patch was tested with different sort of microbenchmarks and artificial delays (e.g. "udelay(get_random_int() & 0xff)") introduced in kernel on paths where items are added to lists. [1] https://github.com/rouming/test-tools/blob/master/stress-epoll.c Link: http://lkml.kernel.org/r/20190103150104.17128-5-rpenyaev@suse.deSigned-off-by:Roman Penyaev <rpenyaev@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roman Penyaev authored
Original comment "Activate ep->ws since epi->ws may get deactivated at any time" indeed sounds loud, but it is incorrect, because the path where we check epi->ws is a path where insert to ovflist happens, i.e. ep_scan_ready_list() has taken ep->mtx and waits for this callback to finish, thus ep_modify() (which unregisters wakeup source) waits for ep_scan_ready_list(). Here in this patch I simply call ep_pm_stay_awake_rcu(), which is a bit extra for this path (indirectly protected by main ep->mtx, so even rcu is not needed), but I do not want to create another naked __ep_pm_stay_awake() variant only for this particular case, so rcu variant is just better for all the cases. Link: http://lkml.kernel.org/r/20190103150104.17128-4-rpenyaev@suse.deSigned-off-by:
-
Roman Penyaev authored
Patch series "use rwlock in order to reduce ep_poll_callback() contention", v3. The last patch targets the contention problem in ep_poll_callback(), which can be very well reproduced by generating events (write to pipe or eventfd) from many threads, while consumer thread does polling. The following are some microbenchmark results based on the test [1] which starts threads which generate N events each. The test ends when all events are successfully fetched by the poller thread: spinlock ======== threads events/ms run-time ms 8 6402 12495 16 7045 22709 32 7395 43268 rwlock + xchg ============= threads events/ms run-time ms 8 10038 7969 16 12178 13138 32 13223 24199 According to the results bandwidth of delivered events is significantly increased, thus execution time is reduced. This patch (of 4): All coming events are stored in FIFO order and this is also should be applicable to ->ovflist, which originally is stack, i.e. LIFO. Thus to keep correct FIFO order ->ovflist should reversed by adding elements to the head of the read list but not to the tail. Link: http://lkml.kernel.org/r/20190103150104.17128-2-rpenyaev@suse.deSigned-off-by:Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Joe Perches authored
Warn when any SPDX-License-Identifier: tag is not created on the proper line number. Link: http://lkml.kernel.org/r/9b74ee87f8c1b8fd310e213fcb4994d58610fcb6.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "Enrico Weigelt, metux IT consult" <lkml@metux.net> Signed-off-by:
-
Vadim Bendebury authored
Presently C99 style comments are removed unconditionally before actual patch validity check happens. This is a problem for some third party projects which use checkpatch.pl but do not allow C99 style comments. This patch adds yet another variable, named C99_COMMENT_TOLERANCE. If it is included in the --ignore command line or config file options list, C99 comments in the patch are reported as errors. Tested by processing a patch with a C99 style comment, it passes the check just fine unless '--ignore C99_COMMENT_TOLERANCE' is present in .checkpatch.conf. Link: http://lkml.kernel.org/r/20190110224957.25008-1-vbendeb@chromium.orgSigned-off-by:
Vadim Bendebury <vbendeb@chromium.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Many new generic allocation functions like the kvmalloc family have been added recently to the kernel. The allocation functions test now includes: o kvmalloc and variants o kstrdup_const o kmemdup_nul o dma_alloc_coherent o alloc_skb and variants Add a separate $allocFunctions variable to help make the allocation functions test a bit more readable. Miscellanea: o Use $allocFunctions in the unnecessary OOM message test and add exclude uses with __GFP_NOWARN o Use $allocFunctions in the unnecessary cast test o Add the kvmalloc family to the preferred sizeof alloc style foo = kvmalloc(sizeof(*foo), ...) Link: http://lkml.kernel.org/r/a5e60a2b93e10baf84af063f6c8e56402273105d.camel@perches.comSigned-off-by:
-
Joe Perches authored
Using SPDX commenting style // or /* is specified for various file types in Documentation/process/license-rules.rst so add an appropriate test for .[chsS] files because many proposed file additions and patches do not use the correct style. Link: http://lkml.kernel.org/r/8b02899853247a2c67669561761f354dd3bd110e.camel@perches.comSigned-off-by:
-
Dan Carpenter authored
The test_fw_config->reqs allocation succeeded so these addresses can't be NULL. Also on the second error path, we forgot to set "rc = -ENOMEM;". Link: http://lkml.kernel.org/r/20190221183700.GA1737@kadamSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: lib/assoc_array.c: In function `assoc_array_delete': lib/assoc_array.c:1110:3: warning: this statement may fall through [-Wimplicit-fallthrough=] for (slot = 0; slot < ASSOC_ARRAY_FAN_OUT; slot++) { ^~~ lib/assoc_array.c:1118:2: note: here case assoc_array_walk_tree_empty: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Link: http://lkml.kernel.org/r/20190212212206.GA16378@embeddedorSigned-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Olof Johansson authored
Since we now build with -Wvla, any use of VLA throws a warning. Including this test, so... maybe we should just remove the test? lib/test_ubsan.c: In function 'test_ubsan_vla_bound_not_positive': lib/test_ubsan.c:48:2: warning: ISO C90 forbids variable length array 'buf' [-Wvla] For the out-of-bounds test, switch to non-VLA setup. lib/test_ubsan.c: In function 'test_ubsan_out_of_bounds': lib/test_ubsan.c:64:2: warning: ISO C90 forbids variable length array 'arr' [-Wvla] Link: http://lkml.kernel.org/r/20190113183210.56154-1-olof@lixom.netSigned-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Stanislaw Gruszka authored
fls counts bits starting from 1 to 32 (returns 0 for zero argument). If we add 1 we shift right one bit more and loose precision from divisor, what cause function incorect results with some numbers. Corrected code was tested in user-space, see bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202391 Link: http://lkml.kernel.org/r/1548686944-11891-1-git-send-email-sgruszka@redhat.com Fixes: 658716d1 ("div64_u64(): improve precision on 32bit platforms") Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Reported-by:
Siarhei Volkau <lis8215@gmail.com> Tested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Vineet Gupta authored
| > Also, set_mask_bits is used in fs quite a bit and we can possibly come up | > with a generic llsc based implementation (w/o the cmpxchg loop) | | May I also suggest changing the return value of set_mask_bits() to old. | | You can compute the new value given old, but you cannot compute the old | value given new, therefore old is the better return value. Also, no | current user seems to use the return value, so changing it is without | risk. Link: http://lkml.kernel.org/g/20150807110955.GH16853@twins.programming.kicks-ass.net Link: http://lkml.kernel.org/r/1548275584-18096-4-git-send-email-vgupta@synopsys.comSigned-off-by:
Vineet Gupta <vgupta@synopsys.com> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Reviewed-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Rasmus Villemoes authored
With coming changes on x86-64, all dynamic debug descriptors in a translation unit must have distinct names. The macro _dynamic_func_call takes care of that. No functional change. Link: http://lkml.kernel.org/r/20190212214150.4807-15-linux@rasmusvillemoes.dkSigned-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Jason Baron <jbaron@akamai.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Rasmus Villemoes authored
If CONFIG_DYNAMIC_DEBUG is not set, acpi_handle_debug directly invokes acpi_handle_printk (if DEBUG) or does a no-printk (if !DEBUG). So this macro is never used. Link: http://lkml.kernel.org/r/20190212214150.4807-14-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
dynamic debug may be implemented via static keys, but ACPI is missing out on that runtime benefit since it open-codes one possible definition of DYNAMIC_DEBUG_BRANCH. Link: http://lkml.kernel.org/r/20190212214150.4807-13-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
First, the btrfs_debug macros open-code (one possible definition of) DYNAMIC_DEBUG_BRANCH, so they don't benefit from the CONFIG_JUMP_LABEL optimization. Second, a planned change of struct _ddebug (to reduce its size on 64 bit machines) requires that all descriptors in a translation unit use distinct identifiers. Using the new _dynamic_func_call_no_desc helper macro from dynamic_debug.h takes care of both of these. No functional change. Link: http://lkml.kernel.org/r/20190212214150.4807-12-linux@rasmusvillemoes.dkSigned-off-by:
David Sterba <dsterba@suse.com> Acked-by:
-
Rasmus Villemoes authored
For the upcoming 'define the _ddebug descriptor in assembly', we need all the descriptors in a translation unit to have distinct names (because asm does not understand C scope). The easiest way to achieve that is as usual with an extra level of macros, passing the identifier to use to the innermost macro, generating it via __UNIQUE_ID or something. However, instead of repeating that exercise for dynamic_pr_debug, dynamic_dev_dbg, dynamic_netdev_dbg and dynamic_hex_dump separately, we can use the similarity between their bodies to implement them via a common macro, _dynamic_func_call - though the hex_dump case requires a slight variant, since print_hex_dump does not take the _ddebug descriptor. We'll also get to use that variant elsewhere (btrfs). Link: http://lkml.kernel.org/r/20190212214150.4807-11-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
For symmetry with ddebug_remove_module, and to avoid a bit of ifdeffery in module.c, move the declaration of ddebug_add_module inside #if defined(CONFIG_DYNAMIC_DEBUG) and add a corresponding no-op stub in the #else branch. Link: http://lkml.kernel.org/r/20190212214150.4807-10-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
This serves two purposes: First, we get a diagnostic if (though extremely unlikely), any of the calls of ddebug_add_module for built-in code fails, effectively disabling dynamic_debug. Second, I want to make struct _ddebug opaque, and avoid accessing any of its members outside dynamic_debug.[ch]. Link: http://lkml.kernel.org/r/20190212214150.4807-9-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
The only caller of ddebug_{add,remove}_module outside dynamic_debug.c is kernel/module.c, which is obviously not itself modular (though it would be an interesting exercise to make that happen...). I also fail to see how these interfaces can be used by modules, in-tree or not. Link: http://lkml.kernel.org/r/20190212214150.4807-8-linux@rasmusvillemoes.dkSigned-off-by: -
Rasmus Villemoes authored
Now that we store the passed-in string directly in ddebug_add_module, we can use pointer equality instead of strcmp. This is a little more efficient, but more importantly, this also makes the code somewhat more correct: Currently, if one loads and then unloads a module whose name happens to match the KBUILD_MODNAME of some built-in functionality (which need not even be modular at all), all of their dynamic debug entries vanish along with those of the actual module. For example, loading and unloading a core.ko hides all pr_debugs from drivers/base/core.c and other built-in files called core.c (incidentally, there is an in-tree module whose name is core, but I just tested this with an out-of-tree trivial one). Link: http://lkml.kernel.org/r/20190212214150.4807-7-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
For built-in modules, we're already reusing the passed-in string via kstrdup_const(). But for actual modules (i.e. when we're called from dynamic_debug_setup in module.c), the passed-in string (which points at the name[] array inside struct module) is also guaranteed to live at least as long as the struct ddebug_table, since free_module() calls ddebug_remove_module(). Link: http://lkml.kernel.org/r/20190212214150.4807-6-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
Instead of defining DEFINE_DYNAMIC_DEBUG_METADATA in terms of a helper DEFINE_DYNAMIC_DEBUG_METADATA_KEY, that needs another helper dd_key_init to be properly defined, just make the various #ifdef branches define a _DPRINTK_KEY_INIT that can be used directly, similar to _DPRINTK_FLAGS_DEFAULT. Link: http://lkml.kernel.org/r/20190212214150.4807-5-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
pr_debug_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-4-linux@rasmusvillemoes.dkSigned-off-by:
Petr Mladek <pmladek@suse.com> Acked-by:
-
Rasmus Villemoes authored
net_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-3-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
Patch series "various dynamic_debug patches", v4. This started as an experiment to see how hard it would be to change the four pointers in struct _ddebug into relative offsets, a la CONFIG_GENERIC_BUG_RELATIVE_POINTERS, thus saving 16 bytes per pr_debug site (and thus exactly making up for the extra space used by the introduction of jump labels in 9049fc74). I stumbled on a few things that are probably worth fixing regardless of whether that goal is deemed worthwhile. Back at v3 (in November), I redid the implementation on top of the fancy new asm-macros stuff. Luckily enough, v3 didn't get picked up, since the asm-macros were backed out again. I still want to do the relative-pointers thing eventually, but we're close to the merge window opening, so here's just most of the "incidental" patches, some of which also serve as preparation for the relative pointers. This patch (of 4): dev_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-2-linux@rasmusvillemoes.dkSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
Nadav Amit authored
Commit 95846ecf ("pid: replace pid bitmap implementation with IDR API") removed next_pidmap() but left its declaration. Remove it. No functional change. Link: http://lkml.kernel.org/r/20190213113736.21922-1-namit@vmware.comSigned-off-by:
Nadav Amit <namit@vmware.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gargi Sharma <gs051095@gmail.com> Signed-off-by:
-
Masahiro Yamada authored
<linux/kernel.h> tends to be cluttered because we often put various sort of unrelated stuff in it. So, we have split out a sensible chunk of code into a separate header from time to time. This commit splits out the *_MAX and *_MIN defines. The standard header <limits.h> contains various MAX, MIN constants including numerial limits. [1] I think it makes sense to move in-kernel MAX, MIN constants into include/linux/limits.h. We already have include/uapi/linux/limits.h to contain some user-space constants. I changed its include guard to _UAPI_LINUX_LIMITS_H. This change has no impact to the user-space because scripts/headers_install.sh rips off the '_UAPI' prefix from the include guards of exported headers. [1] http://pubs.opengroup.org/onlinepubs/009604499/basedefs/limits.h.html Link: http://lkml.kernel.org/r/1549156242-20806-2-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by:
-
Masahiro Yamada authored
The commit log of 44f564a4 ("ipc: add definitions of USHORT_MAX and others") did not explain why it used (s16) and (u16) instead of (short) and (unsigned short). Let's use (short) and (unsigned short), which is more sensible, and more consistent with the other MAX/MIN defines. As you see in include/uapi/asm-generic/int-ll64.h, s16/u16 are typedef'ed as signed/unsigned short. So, this commit does not have a functional change. Remove the unneeded parentheses around ~0U while we are here. Link: http://lkml.kernel.org/r/1549156242-20806-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
-
Rasmus Villemoes authored
Instead of doing this compile-time check in some slightly arbitrary user of struct filename, put it next to the definition. Link: http://lkml.kernel.org/r/20190208203015.29702-3-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
At the time of commit d0484193 ("lib/vsprintf.c: expand field_width to 24 bits"), there was no compiletime_assert/BUILD_BUG/.... variant that could be used outside function scope. Now we have static_assert(), so move the assertion next to the definition instead of hiding it in some arbitrary function. Also add the appropriate #include to avoid relying on build_bug.h being pulled in via some arbitrary chain of includes. Link: http://lkml.kernel.org/r/20190208203015.29702-2-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
BUILD_BUG_ON() is a little annoying, since it cannot be used outside function scope. So one cannot put assertions about the sizeof() a struct next to the struct definition, but has to hide that in some more or less arbitrary function. Since gcc 4.6 (which is now also the required minimum), there is support for the C11 _Static_assert in all C modes, including gnu89. So add a simple wrapper for that. _Static_assert() requires a message argument, which is usually quite redundant (and I believe that bug got fixed at least in newer C++ standards), but we can easily work around that with a little macro magic, making it optional. For example, adding static_assert(sizeof(struct printf_spec) == 8); in vsprintf.c and modifying that struct to violate it, one gets ./include/linux/build_bug.h:78:41: error: static assertion failed: "sizeof(struct printf_spec) == 8" #define __static_assert(expr, msg, ...) _Static_assert(expr, "" msg "") godbolt.org suggests that _Static_assert() has been support by clang since at least 3.0.0. Link: http://lkml.kernel.org/r/20190208203015.29702-1-linux@rasmusvillemoes.dkSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Colin Ian King authored
Here are some of the more common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel over the past 4 months. Link: http://lkml.kernel.org/r/20190114110215.1986-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Mathieu Malaterre authored
There is a plan to build the kernel with -Wimplicit-fallthrough and this place in the code produced a warning (W=1). This commit remove the following warning: kernel/sys.c:1748:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Link: http://lkml.kernel.org/r/20190114203347.17530-1-malat@debian.orgSigned-off-by:
Mathieu Malaterre <malat@debian.org> Reviewed-by:
-
Tetsuo Handa authored
Since commit a2e51445 ("kernel/hung_task.c: allow to set checking interval separately from timeout") added hung_task_check_interval_secs, setting a value different from hung_task_timeout_secs echo 0 > /proc/sys/kernel/hung_task_panic echo 120 > /proc/sys/kernel/hung_task_timeout_secs echo 5 > /proc/sys/kernel/hung_task_check_interval_secs causes confusing output as if the task was blocked for hung_task_timeout_secs seconds from the previous report. [ 399.395930] INFO: task kswapd0:75 blocked for more than 120 seconds. [ 405.027637] INFO: task kswapd0:75 blocked for more than 120 seconds. [ 410.659725] INFO: task kswapd0:75 blocked for more than 120 seconds. [ 416.292860] INFO: task kswapd0:75 blocked for more than 120 seconds. [ 421.932305] INFO: task kswapd0:75 blocked for more than 120 seconds. Although we could update t->last_switch_time after sched_show_task(t) if we want to report only every 120 seconds, reporting every 5 seconds might not be very bad for monitoring after a problematic situation has started. Thus, let's use continuously blocked time instead of updating previously reported time. [ 677.985011] INFO: task kswapd0:80 blocked for more than 122 seconds. [ 693.856126] INFO: task kswapd0:80 blocked for more than 138 seconds. [ 709.728075] INFO: task kswapd0:80 blocked for more than 154 seconds. [ 725.600018] INFO: task kswapd0:80 blocked for more than 170 seconds. [ 741.473133] INFO: task kswapd0:80 blocked for more than 186 seconds. Link: http://lkml.kernel.org/r/1551175083-10669-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
-
Valdis Kletnieks authored
sparse complains: CHECK kernel/hung_task.c kernel/hung_task.c:28:19: warning: symbol 'sysctl_hung_task_check_count' was not declared. Should it be static? kernel/hung_task.c:42:29: warning: symbol 'sysctl_hung_task_timeout_secs' was not declared. Should it be static? kernel/hung_task.c:47:29: warning: symbol 'sysctl_hung_task_check_interval_secs' was not declared. Should it be static? kernel/hung_task.c:49:19: warning: symbol 'sysctl_hung_task_warnings' was not declared. Should it be static? kernel/hung_task.c:61:28: warning: symbol 'sysctl_hung_task_panic' was not declared. Should it be static? kernel/hung_task.c:219:5: warning: symbol 'proc_dohung_task_timeout_secs' was not declared. Should it be static? Add the appropriate header file to provide declarations. Link: http://lkml.kernel.org/r/467.1548649525@turing-police.cc.vt.eduSigned-off-by:Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Signed-off-by:
-
WangBo authored
Use "unsigned int" instead of "unsigned", to make code more clear. Link: http://lkml.kernel.org/r/1551354739-6648-1-git-send-email-wdjjwb@163.comSigned-off-by:
WangBo <wang.bo116@zte.com.cn> Reviewed-by:
-
Randy Dunlap authored
The single quotation marks around "const" were causing a documentation markup warning with reST. Instead of fixing that warning, just delete that comment line and the gcc-3.3 hack of using "const" in the roundup() macro since gcc-3.3 is no longer supported for kernel builds. I did around 20 different $arch builds with no problems, but we'll just have to see if this causes problems for anyone else out there. Link: http://lkml.kernel.org/r/ec5dcf72-7c3e-3513-af0c-4003ed598854@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Suggested-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
YueHaibing authored
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci The _unsafe() part suggests that some of them "safeness responsibilities" are now panic.c responsibilities. The patch is OK since panic's clear_warn_once_fops struct file_operations is safe against removal, so we don't have to use otherwise necessary debugfs_file_get()/debugfs_file_put(). [sergey.senozhatsky.work@gmail.com: changelog addition] Link: http://lkml.kernel.org/r/1545990861-158097-1-git-send-email-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Jani Nikula authored
Include asm/div64.h for do_div() usage in DIV_ROUND_DOWN_ULL() and DIV_ROUND_CLOSEST_ULL(). Remove the old CONFIG_LBDAF=y conditional include. Link: http://lkml.kernel.org/r/20181228153430.23763-1-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
