John W. Linville says:

====================
Here is another batch of updates intended for 3.7...

Highlights include an hci_connect re-write in Bluetooth, HCI/LLC
layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP
raw sockets support, improved IBSS auth frame handling in mac80211,
full-MAC AP mode notification support in mac80211, a lot of attention
paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k,
mwifiex, and rt2x00, and various other updates.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Added and modified a few log messages mostly in probe path.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) link_status_query() is always called to query the link-speed (speed
after applying qos). When there is no qos setting, link-speed is derived from
port-speed. Do all this inside this routine and hide this from the callers.

2) adpater->phy.forced_port_speed is not being set anywhere after being
initialized. Get rid of this variable.

3) Ignore async link_speed notifications till the initial value has been
fetched from FW.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All invocations of this routine use the same type value.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simple round-robin hardware TX scheduling can cause starvation of TX rings
with small packets when other TX rings have large TSO or jumbo packets.

In the simplest case, consider 2 TCP streams running in opposite
directions.  The TSO TX traffic will hash to one ring and the ACKs for the
incoming data on a different TCP connection will hash to a different TX
ring.  The hardware fetches one complete TSO packet (up to 64K data)
before servicing the other TX ring.  When it gets to the other TX ring, it
will only fetch one packet (64-byte ACK packet in this case).  After that,
it will switch back to the 1st ring filled with more TSO packets.  Because
only one ACK can go out roughly every 500 usec in this case, the incoming
data rate becomes very low.

Update version to 3.125.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Default remains the same.
Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

by introducing tg3_stop() that does the opposite of tg3_start().  This
function will be useful when adding the support for changing the numbe
of rx and tx rings.
Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

by introducing tg3_start() that handles all initialization steps from
IRQ allocation.  This function will be needed when adding support for
changing the number of rx and tx rings.
Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

since the number of rings can be different.
Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

irq_cnt is no longer necessarily equal to the number rx or tx rings.
Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is preparation work to allow the number of RX and TX rings to be
configured separately.
Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fib6_add_1() should consistently return errno pointers,
rather than a mixture of NULL and errno pointers.
Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
this pull request is for net-next, for the v3.7 release cycle.
AnilKumar Ch contributed a fix for a segfault in the c_can driver,
which is triggered by an earlier commit [1] in net-next (so no backport
is needed).
...
[1] 4cdd34b2 can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables wake from system suspend on magic packet.

Patch updated to change BUG_ON to WARN_ON_ONCE.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch instructs the device to enter its lowest power SUSPEND2
state during system suspend.

This patch also explicitly wakes the device after resume, which
should address reports of the device not automatically coming
back after system suspend:

Patch updated to change BUG_ON to WARN_ON_ONCE.

http://code.google.com/p/chromium-os/issues/detail?id=31871Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds an explicit test that the READY bit is set on
the device when attempting to initialize it.

If this bit is clear then the device hasn't succesfully started
all its clocks, and this patch helps make the resulting logged
error more helpful.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables wake from system suspend on magic packet.

Patch updated to replace BUG_ON with WARN_ON_ONCE and return.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables the device to enter its lowest power SUSPEND2
state during system suspend, instead of staying up using full power.

Patch updated to not add two pointers to .suspend & .resume.

Patch updated to replace BUG_ON with WARN_ON_ONCE and return.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes an issue on some systems, where after suspend the
link is re-established but the ethernet interface does not resume.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds additional checks of the values returned by
smsc95xx_(read|write)_reg, and wraps their common patterns
in macros.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removes unnecessary variables as smsc95xx_write_reg takes its
value by parameter.  Early versions passed this parameter by
reference.

Also replace hardcoded interrupt status value with a #define
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

During init, the device reset is unexpected to complete immediately,
so sleep before testing the condition rather than after it.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/team/team.c
	drivers/net/usb/qmi_wwan.c
	net/batman-adv/bat_iv_ogm.c
	net/ipv4/fib_frontend.c
	net/ipv4/route.c
	net/l2tp/l2tp_netlink.c

The team, fib_frontend, route, and l2tp_netlink conflicts were simply
overlapping changes.

qmi_wwan and bat_iv_ogm were of the "use HEAD" variety.

With help from Antonio Quartulli.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David S Miller:

 1) Netfilter xt_limit module can use uninitialized rules, from Jan
    Engelhardt.

 2) Wei Yongjun has found several more spots where error pointers were
    treated as NULL/non-NULL and vice versa.

 3) bnx2x was converted to pci_io{,un}map() but one remaining plain
    iounmap() got missed.  From Neil Horman.

 4) Due to a fence-post type error in initialization of inetpeer entries
    (which is where we store the ICMP rate limiting information), we can
    erroneously drop ICMPs if the inetpeer was created right around when
    jiffies wraps.

    Fix from Nicolas Dichtel.

 5) smsc75xx resume fix from Steve Glendinnig.

 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.

 7) qlcnic uses msleep() with locks held, fix from Narendra K.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netdev: octeon: fix return value check in octeon_mgmt_init_phy()
  inetpeer: fix token initialization
  qlcnic: Fix scheduling while atomic bug
  bnx2: Clean up remaining iounmap
  net: phy: smsc: Implement PHY config_init for LAN87xx
  smsc75xx: fix resume after device reset
  netdev: pasemi: fix return value check in pasemi_mac_phy_init()
  team: fix return value check
  l2tp: fix return value check
  netfilter: xt_limit: have r->cost != 0 case work

Pull vfs fixes from Al Viro:
 "A couple of fixes; one for automount/lazy umount race, another a
  classic "we don't protect the refcount transition to zero with the
  lock that protects looking for object in hash" kind of crap in lockd."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  close the race in nlmsvc_free_block()
  do_add_mount()/umount -l races

Pull UML fixes from Richard Weinberger.

* 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Preinclude include/linux/kern_levels.h
  um: Fix IPC on um
  um: kill thread->forking
  um: let signal_delivered() do SIGTRAP on singlestepping into handler
  um: don't leak floating point state and segment registers on execve()
  um: take cleaning singlestep to start_thread()

Pull dm fixes from Alasdair G Kergon:
 "A few fixes for problems discovered during the 3.6 cycle.

  Of particular note, are fixes to the thin target's discard support,
  which I hope is finally working correctly; and fixes for multipath
  ioctls and device limits when there are no paths."

* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm verity: fix overflow check
  dm thin: fix discard support for data devices
  dm thin: tidy discard support
  dm: retain table limits when swapping to new table with no devices
  dm table: clear add_random unless all devices have it set
  dm: handle requests beyond end of device instead of using BUG_ON
  dm mpath: only retry ioctl when no paths if queue_if_no_path set
  dm thin: do not set discard_zeroes_data

Speculative cache pagecache lookups can elevate the refcount from
under us, so avoid the false positive. If the refcount is < 2 we'll be
notified by a VM_BUG_ON in put_page_testzero as there are two
put_page(src_page) in a row before returning from this function.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	net/nfc/netlink.c
Signed-off-by: John W. Linville <linville@tuxdriver.com>

So says Samuel Ortiz <sameo@linux.intel.com>:

The 2nd NFC pull request for 3.7.

- A couple of wrong context sleep fixes.
- An LLCP rwlock intizialisation fix.
- A missing mutex unlocking for pn533.
- LLCP raw sockets support. This is going to be used for NFC sniffing.
- A build fix for llc_shdlc. It fixes a build error triggered by code that's
  living in wireless-next.
Signed-off-by: John W. Linville <linville@tuxdriver.com>

In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 51af6d7c.

Breaks the build with CONFIG_PCI_ATS not enabled.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "The three nouveau fixes quiten unneeded dmesg spam that people are
   seeing and pondering,

  The udl fix stops it from trying to driver monitors that are too big,
  where we get a black screen.

  And a vmware memory alloc problem."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
  drm/udl: limit modes to the sku pixel limits.
  vmwgfx: corruption in vmw_event_fence_action_create()
  drm/nvc0/ltcg: mask off intr 0x10
  drm/nouveau: silence a debug message triggered by newer userspace

Pull USB fixes from Greg Kroah-Hartman:
 "Here are two USB bugfixes for your 3.6-rc7 tree.

  The OHCI fix has been reported a number of times and is a regression
  from 3.5, and the patch that causes the regression was on the way to
  the -stable trees before I was reminded (again) that this fix needed
  to get to your tree soon.

  The host controller bugfix was reported in older kernels as being
  pretty easy to trigger, and has been tested by Red Hat and their
  customers.

  Both have been in the usb-next branch in the -next tree for a while
  now, I just cherry-picked them out to get to you in time for the 3.6
  release.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Fix race condition when removing host controllers
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq

Also fix the calls to next_packet_size() for the pause case. This was
missed in 245baf98 ("ALSA: snd-usb: fix calls to next_packet_size").
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de>
Cc: stable@kernel.org
[ Taking directly because Takashi is on vacation  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ASoC update from Mark Brown:
 "One small and obvious driver-specific fix.

  Takashi is on vacation now so he asked me to send directly, it's a
  pretty bad bug with low regression risk."

* tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
  ASoC: wm2000: Correct register size

Remove two holes on 64bit arches, and put dev_list at the end of
napi_struct since its not used in fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently use percpu order-0 pages in __netdev_alloc_frag
to deliver fragments used by __netdev_alloc_skb()

Depending on NIC driver and arch being 32 or 64 bit, it allows a page to
be split in several fragments (between 1 and 8), assuming PAGE_SIZE=4096

Switching to bigger pages (32768 bytes for PAGE_SIZE=4096 case) allows :

- Better filling of space (the ending hole overhead is less an issue)

- Less calls to page allocator or accesses to page->_count

- Could allow struct skb_shared_info futures changes without major
  performance impact.

This patch implements a transparent fallback to smaller
pages in case of memory pressure.

It also uses a standard "struct page_frag" instead of a custom one.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When jiffies wraps around (for example, 5 minutes after the boot, see
INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be
< XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus
some icmp packets can be unexpectedly dropped.

Fix this case by initializing last_rate to 60 seconds in the past.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>