- 09 Jan, 2006 40 commits
-
-
Benjamin Herrenschmidt authored
This is the continuation of the previous patch. This one removes the old PowerMac i2c drivers (i2c-keywest and i2c-pmac-smu) and replaces them both with a single stub driver that uses the new PowerMac low i2c layer. Now that i2c-keywest is gone, the low-i2c code is extended to support interrupt driver transfers. All i2c busses now appear as platform devices. Compatibility with existing drivers should be maintained as the i2c bus names have been kept identical, except for the SMU bus but in that later case, all users has been fixed. With that patch added, matching a device node to an i2c_adapter becomes trivial. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This is the first part of a rework of the PowerMac i2c code. It completely reworks the "low_i2c" layer. It is now more flexible, supports KeyWest, SMU and PMU i2c busses, and provides functions to match device nodes to i2c busses and adapters. This patch also extends & fix some bugs in the SMU driver related to i2c support and removes the clock spreading hacks from the pmac feature code rather than adapting them to the new API since they'll be replaced by the platform function code completely in patch 3/5 Signed-off-by:
-
Anton Blanchard authored
ppc64 has its own version of sys_time. It looks pretty scary, touching a whole bunch of variables without any locking or memory ordering. In fact, a recent bugreport has shown it can actually go backwards. Time to remove it and just use the generic sys_time, which is implemented on top of do_gettimeofday. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Paul Janzen authored
In 2.6.14, we had the following definition of _GLOBAL() in include/asm-ppc/processor.h: #define _GLOBAL(n)\ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ .globl n;\ n: In 2.6.15, as part of the great powerpc merge, we moved this definition to include/asm-powerpc/ppc_asm.h, where it appears (to 32-bit code) as: #define _GLOBAL(n) \ .text; \ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ .globl n; \ n: Mostly, this is fine. However, we also have the following, in arch/ppc/boot/common/util.S: .section ".relocate_code","xa" [...] _GLOBAL(flush_instruction_cache) [...] _GLOBAL(flush_data_cache) [...] The addition of the .text section definition in the definition of _GLOBAL overrides the .relocate_code section definition. As a result, these two functions don't end up in .relocate_code, so they don't get relocated correctly, and the boot fails. There's another suspicious-looking usage at kernel/swsusp.S:37 that someone should look into. I did not exhaustively search the source tree, though. The following is the minimal patch that fixes the immediate problem. I could easily be convinced that the _GLOBAL definition should be modified to remove the ".text;" line either instead of, or in addition to, this fix. Signed-off-by:Paul Janzen <pcj@linux.sez.to> Signed-off-by:
-
Arnd Bergmann authored
For far, all SPU triggered interrupts always end up on the first SMT thread, which is a bad solution. This patch implements setting the affinity to the CPU that was running last when entering execution on an SPU. This should result in a significant reduction in IPI calls and better cache locality for SPE thread specific data. Signed-off-by:
Arnd Bergmann <arndb@de.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
The size of the local store is architecture defined and independent from the page size, so it should not be defined in terms of pages in the first place. This mistake broke a few places when building for 64kb pages. Signed-off-by:
-
Arnd Bergmann authored
One local variable is missing an __iomem modifier, in another place, we pass a completely unused argument with a missing __user modifier. Signed-off-by:
-
Arnd Bergmann authored
In a hypervisor based setup, direct access to the first priviledged register space can typically not be allowed to the kernel and has to be implemented through hypervisor calls. As suggested by Masato Noguchi, let's abstract the register access trough a number of function calls. Since there is currently no public specification of actual hypervisor calls to implement this, I only provide a place that makes it easier to hook into. Cc: Masato Noguchi <Masato.Noguchi@jp.sony.com> Cc: Geoff Levand <geoff.levand@am.sony.com> Signed-off-by:
-
Arnd Bergmann authored
The logic for sys_spu_run keeps growing and it does not really belong into file.c any more since we moved away from using regular file operations to our own syscall. No functional change in here. Signed-off-by:
-
Arnd Bergmann authored
checking bits manually might not be synchonized with the use of set_bit/clear_bit. Make sure we always use the correct bitops by removing the unnecessary identifiers. Signed-off-by:
-
Arnd Bergmann authored
If creating one entry failed in spufs_fill_dir, we never cleaned up the freshly created entries. Fix this by calling the cleanup function on error. Noticed by Al Viro. Signed-off-by:
-
Arnd Bergmann authored
If get_unused_fd failed in sys_spu_create, we never cleaned up the created directory. Fix that by restructuring the error path. Noticed by Al Viro. Signed-off-by:
-
Arnd Bergmann authored
When spu_activate fails in spu_acquire_runnable, the state must still be SPU_STATE_SAVED, we were incorrectly setting it to SPU_STATE_RUNNABLE. Signed-off-by:
-
Arnd Bergmann authored
During an earlier cleanup, we lost the serialization of multiple spu_run calls performed on the same spu_context. In order to get this back, introduce a mutex in the spu_context that is held inside of spu_run. Noticed by Al Viro. Signed-off-by:
-
Arnd Bergmann authored
Only checking for SPUFS_MAGIC is not reliable, because it might not be unique in theory. Worse than that, we accidentally allow spu_run to be performed on any file in spufs, not just those returned from spu_create as intended. Noticed by Al Viro. Signed-off-by:
-
Arnd Bergmann authored
spu_forget will do mmput on the DMA address space, which can lead to lots of other stuff getting triggered. We better not hold a semaphore here that we might need in the process. Noticed by Al Viro. Signed-off-by:
-
Arnd Bergmann authored
We need to check for validity of owner under down_write, down_read is not enough. Noticed by Al Viro. Signed-off-by:
-
Arnd Bergmann authored
This patch enables support for pause(0) power management state for the Cell Broadband Processor, which is import for power efficient operation. The pervasive infrastructure will in the future enable us to introduce more functionality specific to the Cell's pervasive unit. From: Maximino Aguilar <maguilar@us.ibm.com> Signed-off-by:
-
Kumar Gala authored
Only build in support for ISA and PCI cases if we have enabled CONFIG_ISA and CONFIG_PCI. Additionally, isa_bridge is a global so we shouldn't use it a parameter name since it gets redefined to NULL when !CONFIG_PCI. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Aristeu Sergio Rozanski Filho authored
while using SCC as uart and as serial console at same time I got this: [ 138.214258] Oops: kernel access of bad area, sig: 11 [#1] [ 138.218832] PREEMPT [ 138.221021] NIP: C0105C48 LR: C0105E60 SP: C03D5D10 REGS: c03d5c60 TRAP: 0300 Not tainted [ 138.229280] MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 [ 138.234713] DAR: 00000000, DSISR: C0000000 [ 138.238745] TASK = c0349420[693] 'sh' THREAD: c03d4000 [ 138.243754] Last syscall: 6 [ 138.246402] GPR00: FEFFFFFF C03D5D10 C0349420 C01FB094 00000011 00000000 C1ECFBBC C01F24B0 [ 138.254602] GPR08: FF002820 00000000 FF0028C0 00000000 19133615 A0CBCD5E 02000300 00000000 [ 138.262804] GPR16: 00000000 01FF9E4C 00000000 7FA9A770 00000000 00000000 1003E2A8 00000000 [ 138.271003] GPR24: 100562F4 7F9B6EF4 C0210000 C02A5338 C01FB094 00000000 C01FB094 C1F14574 [ 138.279376] NIP [c0105c48] cpm_uart_tx_pump+0x4c/0x22c [ 138.284419] LR [c0105e60] cpm_uart_start_tx+0x38/0xb0 [ 138.289361] Call trace: [ 138.291762] [c0105e60] cpm_uart_start_tx+0x38/0xb0 [ 138.296547] [c010277c] uart_send_xchar+0x88/0x118 [ 138.301244] [c01029a0] uart_unthrottle+0x6c/0x138 [ 138.305942] [c00ece10] check_unthrottle+0x60/0x64 [ 138.310641] [c00ecec4] reset_buffer_flags+0xb0/0x138 [ 138.315595] [c00ecf64] n_tty_flush_buffer+0x18/0x78 [ 138.320465] [c00e81b0] tty_ldisc_flush+0x64/0x7c [ 138.325078] [c010410c] uart_close+0xf0/0x2c8 [ 138.329348] [c00e9c48] release_dev+0x724/0x8d4 [ 138.333790] [c00e9e18] tty_release+0x20/0x3c [ 138.338061] [c006e544] __fput+0x178/0x1e0 [ 138.342076] [c006c43c] filp_close+0x54/0xac [ 138.346261] [c0002d90] ret_from_syscall+0x0/0x44 [ 138.352386] note: sh[693] exited with preempt_count 2 a easy way to reproduce it is log into the system using ssh and do: cat >/dev/ttyCPM0 then, switch to minicom and write some stuff on it back to ssh, a control C produce the oops this happens because uart_close calls uart_shutdown which frees xmit.buf, currently used by xchar sending in cpm_uart_tx_pump(), which seems wrong. the attached patch fixes the oops and also fixes xchar sending. Signed-off-by: -
Haren Myneni authored
Undefined symbols (eeh_add_device_tree_early and eeh_remove_bus_device) when EEH is not enabled. This small patch will fix this. Acked-by:
Linas Vepstas <linas@austin.ibm.com> Signed-off-by:
-
Haren Myneni authored
At present, we are not looking at all interrupt controller nodes in the device tree even though the proper node was not found. This is causing the system panic. The attached patch will scan all nodes until it finds the proper interrupt controller type. Signed-off-by:
Haren Myneni <haren@us.ibm.com> Signed-off-by:
-
Kumar Gala authored
In setup_arch and setup_system call find_legacy_serial_ports() if we build in support for 8250 serial ports instead of basing it on PPC_MULTIPLATFORM. Signed-off-by:
-
Kumar Gala authored
Added a common udbg_progress for use by ppc_md.progress() Signed-off-by:
-
Kumar Gala authored
Add the ability to configure and initialize legacy 8250 serials ports on an SOC bus. Also, fixed an issue that we would not configure any serial ports if "linux,stdout-path" was not found. Signed-off-by:
-
Kumar Gala authored
The checking of the baudrate in udbg_probe_uart_speed was too tight and would cause reporting back of the default baud rate in cases where the computed speed was valid. Signed-off-by:
-
Mike Kravetz authored
The system will oops if an attempt is made to add memory to an empty node/zone. This patch prevents adding memory to an empty node. The code to dynamically add a node/zone is non-trivial. This patch is temporary and will be removed when the ability to dynamically add a node/zone is complete. Signed-off-by:
Mike Kravetz <kravetz@us.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
Building the arch/powerpc tree currently gives me two warnings with gcc-4.0: arch/powerpc/mm/imalloc.c: In function '__im_get_area': arch/powerpc/mm/imalloc.c:225: warning: 'tmp' may be used uninitialized in this function arch/powerpc/mm/hugetlbpage.c: In function 'hugetlb_get_unmapped_area': arch/powerpc/mm/hugetlbpage.c:608: warning: unused variable 'vma' both fixes are trivial. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Paul Mackerras authored
Grrr.... Signed-off-by: -
Arnd Bergmann authored
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by:
-
David Gibson authored
Oops, forgot to compile the VMALLOCBASE/VMALLOC_START patch on iSeries. VMALLOC_START is defined in pgtable.h whereas previously VMALLOCBASE was previously defined in page.h. lparmap.c needs to be updated appropriately. Booted on iSeries RS64 (now). Signed-off-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
-
Andy Fleming authored
This patch adds oprofile support for the 7450 and all its multitudinous derivatives. * Added 7450 (and derivatives) support for oprofile * Changed e500 cputable to have oprofile model and cpu_type fields * Added support for classic 32-bit performance monitor interrupt * Cleaned up common powerpc oprofile code to be as common as possible * Cleaned up oprofile_impl.h to reflect 32 bit classic code * Added 32-bit MMCRx bitfield definitions and SPR numbers Signed-off-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
-
Kumar Gala authored
pci_address_to_pio is missing a closing curly brace Signed-off-by:
-
Benjamin Herrenschmidt authored
This fixes pci_address_to_pio() to return an unsigned long (to be safe) and fixes a bug in the implementation that caused it to return a bogus IO port number Signed-off-by:
-
Kristian Mueller authored
Fix compilation of via-pmu.c without Power Management support. Signed-off-by: -
David Gibson authored
On ppc64, we independently define VMALLOCBASE and VMALLOC_START to be the same thing: the start of the vmalloc() area at 0xd000000000000000. VMALLOC_START is used much more widely, including in generic code, so this patch gets rid of the extraneous VMALLOCBASE. This does require moving the definitions of region IDs from page_64.h to pgtable.h, but they don't clearly belong in the former rather than the latter, anyway. While we're moving them, clean up the definitions of the REGION_IDs: - Abolish REGION_SIZE, it was only used once, to define REGION_MASK anyway - Define the specific region ids in terms of the REGION_ID() macro. - Define KERNEL_REGION_ID in terms of PAGE_OFFSET rather than KERNELBASE. It amounts to the same thing, but conceptually this is about the region of the linear mapping (which starts at PAGE_OFFSET) rather than of the kernel text itself (which is at KERNELBASE). Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Benjamin Herrenschmidt authored
The patch enabling the new G5's with U4 broke initialization of the DART driver, causing it to trigger a BUG_ON for a case that is actually valid. This patch fixes it: Signed-off-by:
-
Benjamin Herrenschmidt authored
This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by:
-
Kumar Gala authored
Added the ability to determine if an outbound window in the PCI host controller is for prefetchable memory and report it as such. Signed-off-by:
-
linas authored
There is code in the RPAPHP directory that is identical to this routine; I'll be removing that code in an upcoming patch, but this patch is needed to expose the function to make it callable. Signed-off-by:
-
