Skip to content

L
linux
Switch branch/tag
  1. 09 Oct, 2018 12 commits
  3. 08 Oct, 2018 2 commits
    • Julian Wiedmann's avatar
      s390/ccwgroup: add get_ccwgroupdev_by_busid() · 346e485d
      Julian Wiedmann authored 
      Provide function to find a ccwgroup device by its busid.
Acked-by: default avatarSebastian Ott <sebott@linux.ibm.com>
Signed-off-by: default avatarJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      346e485d
    • Harald Freudenberger's avatar
      s390/zcrypt: multiple zcrypt device nodes support · 00fab235
      Harald Freudenberger authored 
      This patch is an extension to the zcrypt device driver to provide,
support and maintain multiple zcrypt device nodes. The individual
zcrypt device nodes can be restricted in terms of crypto cards,
domains and available ioctls. Such a device node can be used as a
base for container solutions like docker to control and restrict
the access to crypto resources.

The handling is done with a new sysfs subdir /sys/class/zcrypt.
Echoing a name (or an empty sting) into the attribute "create" creates
a new zcrypt device node. In /sys/class/zcrypt a new link will appear
which points to the sysfs device tree of this new device. The
attribute files "ioctlmask", "apmask" and "aqmask" in this directory
are used to customize this new zcrypt device node instance. Finally
the zcrypt device node can be destroyed by echoing the name into
/sys/class/zcrypt/destroy. The internal structs holding the device
info are reference counted - so a destroy will not hard remove a
device but only marks it as removable when the reference counter drops
to zero.

The mask values are bitmaps in big endian order starting with bit 0.
So adapter number 0 is the leftmost bit, mask is 0x8000...  The sysfs
attributes accept 2 different formats:
* Absolute hex string starting with 0x like "0x12345678" does set
  the mask starting from left to right. If the given string is shorter
  than the mask it is padded with 0s on the right. If the string is
  longer than the mask an error comes back (EINVAL).
* Relative format - a concatenation (done with ',') of the
  terms +<bitnr>[-<bitnr>] or -<bitnr>[-<bitnr>]. <bitnr> may be any
  valid number (hex, decimal or octal) in the range 0...255. Here are
  some examples:
    "+0-15,+32,-128,-0xFF"
    "-0-255,+1-16,+0x128"
    "+1,+2,+3,+4,-5,-7-10"

A simple usage examples:

  # create new zcrypt device 'my_zcrypt':
  echo "my_zcrypt" >/sys/class/zcrypt/create
  # go into the device dir of this new device
  echo "my_zcrypt" >create
  cd my_zcrypt/
  ls -l
  total 0
  -rw-r--r-- 1 root root 4096 Jul 20 15:23 apmask
  -rw-r--r-- 1 root root 4096 Jul 20 15:23 aqmask
  -r--r--r-- 1 root root 4096 Jul 20 15:23 dev
  -rw-r--r-- 1 root root 4096 Jul 20 15:23 ioctlmask
  lrwxrwxrwx 1 root root    0 Jul 20 15:23 subsystem -> ../../../../class/zcrypt
  ...
  # customize this zcrypt node clone
  # enable only adapter 0 and 2
  echo "0xa0" >apmask
  # enable only domain 6
  echo "+6" >aqmask
  # enable all 256 ioctls
  echo "+0-255" >ioctls
  # now the /dev/my_zcrypt may be used
  # finally destroy it
  echo "my_zcrypt" >/sys/class/zcrypt/destroy

Please note that a very similar 'filtering behavior' also applies to
the parent z90crypt device. The two mask attributes apmask and aqmask
in /sys/bus/ap act the very same for the z90crypt device node. However
the implementation here is totally different as the ap bus acts on
bind/unbind of queue devices and associated drivers but the effect is
still the same. So there are two filters active for each additional
zcrypt device node: The adapter/domain needs to be enabled on the ap
bus level and it needs to be active on the zcrypt device node level.
Signed-off-by: default avatarHarald Freudenberger <freude@linux.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      00fab235
  5. 20 Sep, 2018 14 commits
  7. 19 Sep, 2018 5 commits
  9. 18 Sep, 2018 7 commits
    • Boris Brezillon's avatar
      mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able · 4a3e85f2
      Boris Brezillon authored 
      As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be
DMA-able, and commit 4120f8d1 ("mtd: spi-nor: Use the spi_mem_xx()
API") failed to follow this rule as buffers passed to
->{read,write}_reg() are usually placed on the stack.

Fix that by allocating a scratch buffer and copying the data around.

Fixes: 4120f8d1 ("mtd: spi-nor: Use the spi_mem_xx() API")
Reported-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@bootlin.com>
Tested-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
      4a3e85f2
    • Greg Kroah-Hartman's avatar
      Merge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net · 5211da9c
      Greg Kroah-Hartman authored 
      Dave writes:
  "Various fixes, all over the place:

   1) OOB data generation fix in bluetooth, from Matias Karhumaa.

   2) BPF BTF boundary calculation fix, from Martin KaFai Lau.

   3) Don't bug on excessive frags, to be compatible in situations mixing
      older and newer kernels on each end.  From Juergen Gross.

   4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger.

   5) Zero keying information in TLS layer before freeing copies
      of them, from Sabrina Dubroca.

   6) Fix NULL deref in act_sample, from Davide Caratti.

   7) Orphan SKB before GRO in veth to prevent crashes with XDP,
      from Toshiaki Makita.

   8) Fix use after free in ip6_xmit, from Eric Dumazet.

   9) Fix VF mac address regression in bnxt_en, from Micahel Chan.

   10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann.

   11) Programming adjustments to r8169 which fix not being to enter deep
       sleep states on some machines, from Kai-Heng Feng and Hans de
       Goede.

   12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter
       Oskolkov."

* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits)
  net/ipv6: do not copy dst flags on rt init
  qmi_wwan: set DTR for modems in forced USB2 mode
  clk: x86: Stop marking clocks as CLK_IS_CRITICAL
  r8169: Get and enable optional ether_clk clock
  clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail
  r8169: enable ASPM on RTL8106E
  r8169: Align ASPM/CLKREQ setting function with vendor driver
  Revert "kcm: remove any offset before parsing messages"
  kcm: remove any offset before parsing messages
  net: ethernet: Fix a unused function warning.
  net: dsa: mv88e6xxx: Fix ATU Miss Violation
  tls: fix currently broken MSG_PEEK behavior
  hv_netvsc: pair VF based on serial number
  PCI: hv: support reporting serial number as slot information
  bnxt_en: Fix VF mac address regression.
  ipv6: fix possible use-after-free in ip6_xmit()
  net: hp100: fix always-true check for link up state
  ARM: dts: at91: add new compatibility string for macb on sama5d3
  net: macb: disable scatter-gather for macb on sama5d3
  net: mvpp2: let phylink manage the carrier state
  ...
      5211da9c
    • Peter Oskolkov's avatar
      net/ipv6: do not copy dst flags on rt init · 30bfd930
      Peter Oskolkov authored 
      DST_NOCOUNT in dst_entry::flags tracks whether the entry counts
toward route cache size (net->ipv6.sysctl.ip6_rt_max_size).

If the flag is NOT set, dst_ops::pcpuc_entries counter is incremented
in dist_init() and decremented in dst_destroy().

This flag is tied to allocation/deallocation of dst_entry and
should not be copied from another dst/route. Otherwise it can happen
that dst_ops::pcpuc_entries counter grows until no new routes can
be allocated because the counter reached ip6_rt_max_size due to
DST_NOCOUNT not set and thus no counter decrements on gc-ed routes.

Fixes: 3b6761d1 ("net/ipv6: Move dst flags to booleans in fib entries")
Cc: David Ahern <dsahern@gmail.com>
Acked-by: default avatarWei Wang <weiwan@google.com>
Signed-off-by: default avatarPeter Oskolkov <posk@google.com>
Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      30bfd930
    • Bjørn Mork's avatar
      qmi_wwan: set DTR for modems in forced USB2 mode · 922005c7
      Bjørn Mork authored 
      Recent firmware revisions have added the ability to force
these modems to USB2 mode, hiding their SuperSpeed
capabilities from the host.  The driver has been using the
SuperSpeed capability, as shown by the bcdUSB field of the
device descriptor, to detect the need to enable the DTR
quirk.  This method fails when the modems are forced to
USB2 mode by the modem firmware.

Fix by unconditionally enabling the DTR quirk for the
affected device IDs.
Reported-by: default avatarFred Veldini <fred.veldini@gmail.com>
Reported-by: default avatarDeshu Wen <dwen@sierrawireless.com>
Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
Reported-by: default avatarFred Veldini <fred.veldini@gmail.com>
Reported-by: default avatarDeshu Wen <dwen@sierrawireless.com>
Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      922005c7
    • David S. Miller's avatar
      Merge branch 'r8169-clk-fixes' · 89bfd48d
      David S. Miller authored 
      Hans de Goede says:

====================
r8169 (x86) clk fixes to fix S0ix not being reached

This series adds code to the r8169 ethernet driver to get and enable an
external clock if present, avoiding the need for a hack in the
clk-pmc-atom driver where that clock was left on continuesly causing x86
some devices to not reach deep power saving states (S0ix) when suspended
causing to them to quickly drain their battery while suspended.

The 3 commits in this series need to be merged in order to avoid
regressions while bisecting. The clk-pmc-atom driver does not see much
changes (it was last touched over a year ago). So the clk maintainers
have agreed with merging all 3 patches through the net tree.
All 3 patches have Stephen Boyd's Acked-by for this purpose.

This v2 of the series only had some minor tweaks done to the commit
messages and is ready for merging through the net tree now.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      89bfd48d
    • Hans de Goede's avatar
      clk: x86: Stop marking clocks as CLK_IS_CRITICAL · 648e9218
      Hans de Goede authored 
      Commit d31fd43c ("clk: x86: Do not gate clocks enabled by the
firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes
all unclaimed PMC clocks on Cherry Trail devices to be on all the time,
resulting on the device not being able to reach S0i3 when suspended.

The reason for this commit is that on some Bay Trail / Cherry Trail devices
the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom
driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver
has been modified to get and enable this clock (if present) the marking of
the clocks as CLK_IS_CRITICAL is no longer necessary.

This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail
devices not being able to reach S0i3 greatly decreasing their battery
drain when suspended.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: default avatarJohannes Stezenbach <js@sig21.net>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: default avatarStephen Boyd <sboyd@kernel.org>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      648e9218
    • Hans de Goede's avatar
      r8169: Get and enable optional ether_clk clock · c2f6f3ee
      Hans de Goede authored 
      On some boards a platform clock is used as clock for the r8169 chip,
this commit adds support for getting and enabling this clock (assuming
it has an "ether_clk" alias set on it).

This is related to commit d31fd43c ("clk: x86: Do not gate clocks
enabled by the firmware") which is a previous attempt to fix this for some
x86 boards, but this causes all Cherry Trail SoC using boards to not reach
there lowest power states when suspending.

This commit (together with an atom-pmc-clk driver commit adding the alias)
fixes things properly by making the r8169 get the clock and enable it when
it needs it.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: default avatarJohannes Stezenbach <js@sig21.net>
Acked-by: default avatarStephen Boyd <sboyd@kernel.org>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c2f6f3ee
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7