- 19 Jan, 2016 4 commits
-
-
Devesh Sharma authored
vlan-id is wrongly getting as 0 when PFC is enabled. Set vlan-id configured by user in QP parameters. In case vlan interface is not used, flash a warning to user to configure vlan and assign vlan-id as 0 in qp params. Fixes: dbf727de ('IB/core: Use GID table in AH creation and dmac resolution') Cc: Matan Barak <matanb@mellanox.com> Signed-off-by:
Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Matan Barak authored
cma_validate_port wrongly assumed that Ethernet devices are RoCE devices and thus their ndev should be matched in the GID table. This broke the iWarp support. Fixing that matching the ndev only if we work on a RoCE port. Cc: <stable@vger.kernel.org> # 4.4.x- Fixes: abae1b71 ('IB/cma: cma_validate_port should verify the port and netdevice') Reported-by:
Hariprasad Shenai <hariprasad@chelsio.com> Tested-by:
Matan Barak <matanb@mellanox.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Mike Marciniszyn authored
The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0 [1750924.568035] [<ffffffff811bd214>] vfs_write+0xb4/0x1f0 [1750924.568035] [<ffffffff811bdc49>] SyS_write+0x49/0xa0 [1750924.568035] [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 <f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP <ffff88007af1dd70> [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Cc: <stable@vger.kernel.org> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Erez Shitrit authored
ipoib_mcast_restart_task calls ipoib_mcast_remove_list with the parameter mcast->dev. That mcast is a temporary (used as an iterator) variable that may be uninitialized. There is no need to send the variable dev to the function, as each mcast has its dev as a member in the mcast struct. This causes the next panic: RIP: 0010: ipoib_mcast_leave+0x6d/0xf0 [ib_ipoib] RSP: 0018: EFLAGS: 00010246 RAX: f0201 RBX: 24e00 RCX: 00000 .... .... Stack: Call Trace: ipoib_mcast_remove_list+0x3a/0x70 [ib_ipoib] ipoib_mcast_restart_task+0x3bb/0x520 [ib_ipoib] process_one_work+0x164/0x470 worker_thread+0x11d/0x420 ... Fixes: 5a0e81f6 ('IB/IPoIB: factor out common multicast list removal code') Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reported-by:
Doron Tsur <doront@mellanox.com> Reviewed-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
- 27 Dec, 2015 1 commit
-
-
Jenny Derzhavetz authored
Declare that we support remote invalidation in case we are: 1. using fastreg method 2. always registering memory Detect the invalidated rkey from the work completion info so we won't invalidate it locally. The spec mandates that we must not rely on the target remote invalidate our rkey so we must check it upon a receive (scsi response) completion. Signed-off-by:
Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
- 24 Dec, 2015 28 commits
-
-
Sagi Grimberg authored
When we enable remote invalidate support we won't want to perform local invalidates at the same time we do today, but we still need to get new rkeys. So, decouple the rkey update from the local invalidate and tie it to memory reg instead. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jenny Derzhavetz authored
We'll use remote invalidate, according to negotiation result during connection establishment. If the initiator declared that it supports the remote invalidate exception and the local HCA supports IB_DEVICE_MEM_MGT_EXTENSIONS then the target will use IB_WR_SEND_WITH_INV with the correct rkey for the response. Signed-off-by:
-
Jenny Derzhavetz authored
iser target does not support zero based virtual addresses and send with invalidate, so it should declare that it doesn't. Signed-off-by:
-
Sagi Grimberg authored
We don't need iser_proto.h anymore, remove it and move (non-protocol) declarations to ib_isert.h Signed-off-by:
-
Sagi Grimberg authored
The iser RDMA_CM negotiation protocol is shared by the initiator and the target, so have a shared header for the defines and structure. Move relevant items from the initiator and target headers. Signed-off-by:
-
Jenny Derzhavetz authored
This parameter is described as "is mr valid indicator". In other words, it indicates whether memory registration is valid or not. So intuitive values would be: mr_valid=True, when memory registration is valid and mr_valid=False otherwise. Signed-off-by:
-
Jenny Derzhavetz authored
When all the task data is sent as immediate data, we are allowed to use the local_dma_lkey as it is not sent to the wire. Signed-off-by:
-
Sagi Grimberg authored
We have in iser iser_sg_to_page_vec which has exactly the same role as ib_sg_to_pages. Customize the page_vec to hold a fake MR so we can reuse ib_sg_to_pages. Signed-off-by:
-
Roi Dayan authored
Destroy workqueue on transport register error, also release kmem cache on workqueue allocation error. Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Julia Lawall authored
This mmu_notifier_ops structure is never modified, so declare it as const, like the other mmu_notifier_ops structures. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
-
Julia Lawall authored
The iser_reg_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
-
Julia Lawall authored
The nes_cm_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
-
Bodong Wang authored
This patch will report the tx/rx checksum cap for raw qp via the query device results. Signed-off-by:
Bodong Wang <bodong@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Convert kmalloc to be kmalloc_array to fix warnings below: WARNING: Prefer kmalloc_array over kmalloc with multiply + qp->sq.wrid = kmalloc(qp->sq.wqe_cnt * sizeof(u64), WARNING: Prefer kmalloc_array over kmalloc with multiply + qp->rq.wrid = kmalloc(qp->rq.wqe_cnt * sizeof(u64), WARNING: Prefer kmalloc_array over kmalloc with multiply + srq->wrid = kmalloc(srq->msrq.max * sizeof(u64), Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
-
Leon Romanovsky authored
Failure in kmalloc memory allocations will throw a warning about it. Such warnings are not needed anymore, since in commit 0ef2f05c ("IB/mlx4: Use vmalloc for WR buffers when needed"), fallback mechanism from kmalloc() to __vmalloc() was added. Signed-off-by:
-
Eran Ben Elisha authored
In order to ensure IB spec atomic correctness in atomic operations, if HW is configured to host endianness, advertise IB_ATOMIC_HCA. if not, advertise IB_ATOMIC_NONE. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
HW is capable of 2 requestor endianness modes for standard 8 Bytes atomic: BE (0x0) and host endianness (0x1). Read the supported modes from hca atomic capabilities and configure HW to host endianness mode if supported. Signed-off-by:
-
Hariprasad S authored
The cxgb3_*_send() functions return NET_XMIT_ values, which are positive integers values. So don't treat positive return values as an error. Signed-off-by:
-
Hariprasad S authored
Enhances the t4_dev_status_page to pass the qid start and size attributes from iw_cxgb4 to libcxgb4. Bump the ABI Version to 3 -> To allow libcxgb4 to detect old drivers and revert to the old way of computing the qid ranges. Signed-off-by:
-
Dean Luick authored
It was found that when a process was rapidly sending MADs other processes could be hung in their unregister calls. This would happen when process A was injecting packets fast enough that the single threaded workqueue was never exiting ib_mad_completion_handler. Therefore when process B called flush_workqueue via the unregister call it would hang until process A stopped sending MADs. The fix is to periodically reschedule ib_mad_completion_handler after processing a large number of completions. The number of completions chosen was decided based on the defaults for the recv queue size. However, it was kept fixed such that increasing those queue sizes would not adversely affect fairness in the future. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
-
Leon Romanovsky authored
Add support of cross-channel functionality to mlx5 driver. This includes ability to ignore overrun for CQ which intended for cross-channel, export device capability and configure the QP to be sync master/slave queues. The cross-channel enabled QP supports combination of three possible properties: * WQE processing on the receive queue of this QP * WQE processing on the send queue of this QP * WQE are supported on the send queue Reviewed-by:
-
Leon Romanovsky authored
The cross-channel feature allows to execute WQEs that involve synchronization of I/O operations’ on different QPs. This capability enables to program complex flows with a single function call, hereby significantly reducing overhead associated with I/O processing. Cross-channel operations support is indicated by HCA capability information. The queue pairs can be configured to work as a “sync master queue” or “sync slave queues”. The added flags are: 1. Device capability flag IB_DEVICE_CROSS_CHANNEL for the devices that can perform cross-channel operations. 2. CQ property flag IB_CQ_FLAGS_IGNORE_OVERRUN to disable CQ overrun check. This check is useless in cross-channel scenario. 3. QP property flags to indicate if queues are slave or master: * IB_QP_CREATE_MANAGED_SEND indicates that posted send work requests will not be executed immediately and requires enabling. * IB_QP_CREATE_MANAGED_RECV indicates that posted receive work requests will not be executed immediately and requires enabling. * IB_QP_CREATE_CROSS_CHANNEL declares the QP to work in cross-channel mode. If IB_QP_CREATE_MANAGED_SEND and IB_QP_CREATE_MANAGED_RECV are not provided, this QP will be sync master queue, else it will be sync slave. Reviewed-by: -
Leon Romanovsky authored
Modify enum ib_device_cap_flags such that other patches which add new enum values pass strict checkpatch.pl checks. Reviewed-by:
-
Matan Barak authored
In order to read the HCA's current cycles register, we need to map it to user-space. Add support to map this register via mmap command. Signed-off-by:
Moshe Lazer <moshel@mellanox.com> Signed-off-by:
-
Matan Barak authored
Pass hca_core_clock_offset to user-space is mandatory in order to let the user-space read the free-running clock register from the right offset in the memory mapped page. Passing this value is done by changing the vendor's command and response of init_ucontext to be in extensible form. Signed-off-by:
-
Matan Barak authored
Reporting the hca_core_clock (in kHZ) and the timestamp_mask in query_device extended verb. timestamp_mask is used by users in order to know what is the valid range of the raw timestamps, while hca_core_clock reports the clock frequency that is used for timestamps. Signed-off-by:
-
Matan Barak authored
Extending core and vendor verb commands require us to check that the unknown part of the user's given command is all zeros. Adding ib_is_udata_cleared in order to do so. Signed-off-by:
-
Matan Barak authored
In order to create a CQ that supports timestamp, mlx5 needs to support the extended create CQ command with the timestamp flag. Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
- 23 Dec, 2015 7 commits
-
-
Christoph Lameter authored
Check if the extended counters are available and if so create the proper extended and additional counters. Signed-off-by:
Hal Rosenstock <hal@mellanox.com> Signed-off-by:
-
Christoph Lameter authored
Add the attr_id on port_table_attribute since we will have to add a different port_table_attribute for the extended attribute soon. Reviewed-by:
-
Christoph Lameter authored
Create a new function to retrieve performance management data from the existing code in get_pma_counter(). Reviewed-by:
-
Or Gerlitz authored
The driver was written originally by Roland Dreier, currently there's no official maintainer. Yishai steps in as maintainer. Signed-off-by:
-
Or Gerlitz authored
Matan and Leon step in as co-maintainers to replace Eli Cohen who wrote and maintained the core and IB drivers. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Bart Van Assche <bvanassche@sandisk.com> Reviewed-by:
-
Christoph Hellwig authored
Signed-off-by:
-
