- 04 Feb, 2008 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (77 commits) [IPV6]: Reorg struct ifmcaddr6 to save some bytes [INET_TIMEWAIT_SOCK]: Reorganize struct inet_timewait_sock to save some bytes [DCCP]: Reorganize struct dccp_sock to save 8 bytes [INET6]: Reorganize struct inet6_dev to save 8 bytes [SOCK] proto: Add hashinfo member to struct proto EMAC driver: Fix bug: The clock divisor is set to all ones at reset. EMAC driver: fix bug - invalidate data cache of new_skb->data range when cache is WB EMAC driver: add power down mode EMAC driver: ADSP-BF52x arch/mach support EMAC driver: use simpler comment headers and strip out information that is maintained in the scm's log EMAC driver: bf537 MAC multicast hash filtering patch EMAC driver: define MDC_CLK=2.5MHz and caculate mdc_div according to SCLK. EMAC driver: shorten the mdelay value to solve netperf performance issue [netdrvr] sis190: build fix sky2: fix Wake On Lan interaction with BIOS sky2: restore multicast addresses after recovery pci-skeleton: Misc fixes to build neatly phylib: Add Realtek 821x eth PHY support natsemi: Update locking documentation PHYLIB: Locking fixes for PHY I/O potentially sleeping ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: Driver core: Remove unneeded get_{device,driver}() calls. Driver core: Update some prototypes in platform.txt driver core: convert to use class_find_device api PM: Export device_pm_schedule_removal nozomi: finish constification nozomi: constify driver nozomi driver update Add ja_JP translation of stable_kernel_rules.txt kobject: kerneldoc comment fix kobject: Always build in kernel/ksysfs.o.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: fix 4x section mismatch warnings PCI: fix section mismatch warnings referring to pci_do_scan_bus pci: pci_enable_device_bars() fix for lpfc driver Revert "PCI: PCIE ASPM support"
-
- 03 Feb, 2008 37 commits
-
-
David S. Miller authored
-
Arnaldo Carvalho de Melo authored
/home/acme/git/net-2.6/net/ipv6/mcast.c: struct ifmcaddr6 | -8 1 struct changed igmp6_group_dropped | -6 add_grec | -3 mld_ifc_timer_expire | -18 ip6_mc_add_src | -3 ip6_mc_del_src | -3 igmp6_group_added | -3 6 functions changed, 36 bytes removed, diff: -36 ipv6.ko: 6 functions changed, 36 bytes removed, diff: -36 Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
/home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: struct inet_timewait_sock | -8 struct tcp_timewait_sock | -8 2 structs changed tcp_v6_rcv | -6 1 function changed, 6 bytes removed, diff: -6 Signed-off-by:
-
Arnaldo Carvalho de Melo authored
/home/acme/git/net-2.6/net/dccp/ipv6.c: struct dccp_sock | -8 struct dccp6_sock | -8 2 structs changed Signed-off-by:
-
Arnaldo Carvalho de Melo authored
And make it a multiple of a 64 bytes, reducing cacheline trashing: Before: [acme@doppio net-2.6]$ pahole -C inet6_dev net/dccp/ipv6.o struct inet6_dev { <SNIP> long unsigned int mc_maxdelay; /* 48 8 */ unsigned char mc_qrv; /* 56 1 */ unsigned char mc_gq_running; /* 57 1 */ unsigned char mc_ifc_count; /* 58 1 */ /* XXX 5 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ struct timer_list mc_gq_timer; /* 64 48 */ <SNIP> __u32 if_flags; /* 180 4 */ int dead; /* 184 4 */ u8 rndid[8]; /* 188 8 */ /* XXX 4 bytes hole, try to pack */ /* --- cacheline 3 boundary (192 bytes) was 8 bytes ago --- */ struct timer_list regen_timer; /* 200 48 */ <SNIP> /* size: 456, cachelines: 8 */ /* sum members: 447, holes: 2, sum holes: 9 */ /* last cacheline: 8 bytes */ }; After: net-2.6/net/ipv6/af_inet6.c: struct inet6_dev | -8 1 struct changed Signed-off-by: -
Arnaldo Carvalho de Melo authored
This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: -
Bryan Wu authored
Signed-off-by:
Kalle Pokki <kalle.pokki@eke.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Alexey Demin authored
It prevents overwritting new data from DMA. Signed-off-by:
Alexey Demin <bf53x@ya.ru> Signed-off-by:
-
Vitja Makarov authored
This patch puts phy in power-down mode when interface is down. Also we should think about energy detect power-down mode, that will decrease power consumption when no link. Signed-off-by:
Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Mike Frysinger authored
EMAC driver: use simpler comment headers and strip out information that is maintained in the scm's log Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
Aidan Williams authored
The bf537 Ethernet MAC driver in the 2007R1.1-RC3 kernel (and the current kernel) do not implement multicast hash filtering. This is a performance problem if you have lots of multicast on your network. This patch plugs the right bits into the multicast hash registers. Signed-off-by:
Aidan Williams <aidan@nicta.com.au> Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Jeff Garzik authored
Fix PCI table section type conflict, by removing __devinitdata. Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Stephen Hemminger authored
This patch disables config mode access after clearing PCI settings. Some BIOS's seem to not do WOL if config bit still set. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9721Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Stephen Hemminger authored
If the sky2 deadman timer forces a recovery, the multicast hash list is lost. Move the call to sky2_set_multicast to the end of sky2_up() so all paths that bring device up will restore multicast. Signed-off-by:
-
Jike Song authored
The pci-skeleton.c has several problems with compilation, such as missing args when calling synchronize_irq(). Fix it. Signed-off-by:
Jike Song <albcamus@gmail.com> Signed-off-by:
-
Johnson Leung authored
this PHY present on the MPC8315E and MPC837xE RDB boards. Signed-off-by:
Johnson Leung <r58129@freescale.com> Signed-off-by:
Kevin Lam <r43770@freescale.com> Signed-off-by:
Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Mark Brown authored
The documentation regarding synchronisation at the head of the natsemi driver was badly bitrotted so replace it with a general statement about the techniques used which is less likely to bitrot. Also remove the note saying these chips are uncommon - it makes little difference but they were used in a number of laptops and at least one mass market PCI ethernet card. Signed-off-by:
Mark Brown <broonie@sirena.org.uk> Signed-off-by:
-
Nate Case authored
PHY read/write functions can potentially sleep (e.g., a PHY accessed via I2C). The following changes were made to account for this: * Change spin locks to mutex locks * Add a BUG_ON() to phy_read() phy_write() to warn against calling them from an interrupt context. * Use work queue for PHY state machine handling since it can potentially sleep * Change phydev lock from spinlock to mutex Signed-off-by:Nate Case <ncase@xes-inc.com> Acked-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
-
Ayaz Abdulla authored
This patch is a critical fix for MCP77 and MCP79 devices. The feature flags were missing the define for correct mac address (DEV_HAS_CORRECT_MACADDR). Signed-off-by:
Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by:
-
Ayaz Abdulla authored
This patch fixes the case where no multicast addresses are requested to be added to the multicast filter. The multicast mask must be set to all 1's instead of all 0's. Signed-off-by:
-
Ayaz Abdulla authored
This patch fixes the tx pause enable watermark flags. The new values where determined to be optimal during testing. Signed-off-by:
-
Ayaz Abdulla authored
This patch updates the copyright section to include 2007 and 2008. Signed-off-by:
-
Ayaz Abdulla authored
The driver should inform the stack when checksum has been performed by the HW when both IP and TCP (or UDP) checksum flags are indicated by HW. Previously, it would also inform the stack when only IP checksum flag was indicated by HW. This can cause data corruption when IP fragments are used. The IP Identification field can wrap around and cause data from new fragments to fill into older fragment slots with same IP Id. The stack would then not perform TCP/UDP checksum (after re-assembly of all fragments) since driver falsely stated it was already calculated. Signed-off-by:
-
Ayaz Abdulla authored
This patch fixes the reset register definition from 0x3C to 0x34. Signed-off-by:
-
Roel Kluin authored
include/linux/mii.h:48:#define BMCR_RESET 0x8000 The function reset_phy() is in "#if 0" inactivated code Replace logical "&&" by bit "&" before BMCR_RESET Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
-
Roland Dreier authored
When PCI error recovery was added to cxgb3, a function t3_io_slot_reset() was added. This function can call back into t3_prep_adapter() at any time, so t3_prep_adapter() can no longer be marked __devinit. This patch removes the __devinit annotation from t3_prep_adapter() and all the functions that it calls, which fixes WARNING: drivers/net/cxgb3/built-in.o(.text+0x2427): Section mismatch in reference from the function t3_io_slot_reset() to the function .devinit.text:t3_prep_adapter() Signed-off-by:Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Jay Vosburgh authored
Remove Chad Tindel; he hasn't been involved for a number of years. Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Jay Vosburgh authored
Update bonding to version 3.2.4. Signed-off-by:
-
Jay Vosburgh authored
The ARP monitor functions currently acquire RTNL when performing failover operations, but do so incorrectly (out of order). This causes various warnings from might_sleep. The ARP monitor isn't supported for any of the bonding modes that actually require RTNL, so it is safe to not hold RTNL when failing over in the ARP monitor. Signed-off-by:
-
Andy Gospodarek authored
I've seen reports of invalid stats in /proc/net/dev for bonding interfaces, and found it's a pretty easy problem to reproduce. Since the current code zeros the bonding stats when a read is requested and a pointer to that data is returned to the caller we cannot guarantee that the caller has completely accessed the data before a successive call to request the stats zeroes the stats again. This patch creates a new stack variable to keep track of the updated stats and copies the data from that variable into the bonding stats structure. This ensures that the value for any of the bonding stats should not incorrectly return zero for any of the bonding statistics. This does use more stack space and require an extra memcpy, but it seems like a fair trade-off for consistently correct bonding statistics. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Chris Snook <csnook@redhat.com> Acked-by:
-
Jay Vosburgh authored
Fix the "are we creating a duplicate" check to not compare the name if the name is NULL (meaning that the system should select a name). Bug reported by Benny Amorsen <benny+usenet@amorsen.dk>. Signed-off-by:
-
Jay Vosburgh authored
This patch eliminates a problem (reported by lockdep) in the bond_set_multicast_list function. It first reduces the locking on bond->lock to a simple read_lock, and second, adds netif_tx locking around the bonding mc_list manipulations that occur outside of the set_multicast_list function. The original problem was related to IPv6 addrconf activity. Signed-off-by:
-
Jay Vosburgh authored
My last fix (commit ece95f7f) didn't handle one case correctly. This resolves that, and it will now correctly parse parameters with arbitrary white space, and either text names or mode values. Signed-off-by:
-
Ralf Baechle authored
This is Thiemo's patch. ----- Forwarded message from Thiemo Seufer <ths@networkno.de> ----- From: Thiemo Seufer <ths@networkno.de> Date: Sat, 17 Nov 2007 22:29:13 +0000 To: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org, ralf@linux-mips.org Subject: [PATCH, REPOST] Fix/Rewrite of the mipsnet driver Content-Type: text/plain; charset=us-ascii Hello All, currently the mipsnet driver fails after transmitting a number of packages because SKBs are allocated but never freed. I fixed that and coudn't refrain from removing the most egregious warts. - mipsnet.h folded into mipsnet.c, as it doesn't provide any useful external interface. - Free SKB after transmission. - Call free_irq in mipsnet_close, to balance the request_irq in mipsnet_open. - Removed duplicate read of rxDataCount. - Some identifiers are now less verbose. - Removed dead and/or unnecessarily complex code. - Code formatting fixes. Tested on Qemu's mipssim emulation, with this patch it can boot a Debian NFSroot. Thiemo Signed-off-by:
Thiemo Seufer <ths@networkno.de> Signed-off-by:
-
