- 12 Oct, 2008 40 commits
-
-
Mauro Carvalho Chehab authored
Thanks to Sidney Matias <sidney.matias@gmail.com> for getting GPIO values and testing on this device. Cc: Sidney Matias <sidney.matias@gmail.com> Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by:
Gilberto <gilberto@sistemafenix.com.br> Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by:
-
Shane authored
Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: -
David Bentham authored
The audio switch is at 0x100 and radio on gpio 21. Tested-by:
Thomas Genty <tomlohave@gmail.com> Signed-off-by:
David Bentham <db260179@hotmail.com> Reviewed-by:
Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Firmware selection is very tricky on this device. This patch do a better selection of the proper firmware type, by using a code to hint if the firmware to be loaded should be D2620 or D2633. It also allows overriding the hint at the control structure. Signed-off-by: -
Michael Krufky authored
The tuner_callback function pointer from struct xc5000_config has been removed. Use dvb_frontend->callback instead. Also, mark function dib0700_xc5000_tuner_callback as static int. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Remove tuner_callback pointers from tuner driver configuration and private state structures, replaced with a general-purpose callback pointer within struct dvb_frontend. A new parameter is added to the callback function, called component. This allows us to use this callback pointer by frontend components other than the tuner, if need be. So far, this is only used by tuner drivers. Signed-off-by:
-
Chris Rankin authored
This patch adds remote control support for the Hauppauge WinTV Nova-TD (Diversity) model. (That's the 52009 version.) It also adds the key-codes for the credit-card style remote control that comes with this particular adapter. Signed-off-by:
Chris Rankin <rankincj@yahoo.com> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Devin Heitmueller authored
Add USB ID for Pinnacle PCTV HD USB Stick. According to the USB trace and photos, the only difference is the removal of the port for the analog S-video/audio input. Thanks to Mike Pringle <oblongd@gmail.com> for providing the USB trace of the device starting up, and testing the support. Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by:
-
Devin Heitmueller authored
Support for the Pinnacle PCTV HD Pro 801e creates a dib0700 dependency on the xc5000 tuner and s5h1411 demodulator drivers. Update KConfig accordingly. Signed-off-by:
-
Devin Heitmueller authored
Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a) Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new firmware fixing the issue with the i2c that prevented the xc5000 from working. Signed-off-by:
-
Albert Comerma authored
This patch introduces support for dvb-t for the following dibcom based cards: Asus My Cinema U3000 Hybrid (USB-ID: 0b05:1736) Signed-off-by:
Albert Comerma <albert.comerma@gmail.com> Signed-off-by:
-
Daniel Oliveira Nascimento authored
This patch extends the dib0700 driver to support the DVB-part of the Asus notebook M51Sn tv-tunner (USB-ID 1164:1f08). Signed-off-by:
-
Peter Beutner authored
As reported by BOUWSMA Barry the readout of the signal status doesn't work on dec3000-s models. Since we don't know how to do it better, revert back to the old behaviour and always report a signal lock. Reported by Barry Bouwsma Signed-off-by:
Peter Beutner <p.beutner@gmx.net> Signed-off-by:
-
Devin Heitmueller authored
The Pinnacle PCTV HD Pro has an xc5000, which exposed a bug in the dib0700's i2c implementation where it did not properly support a single i2c read request (sending it as an i2c write request instead). Version 1.20 of the firmware added support for a new i2c API which supported such requests. This change defaults to fw 1.20 for all devices, but does not default to using the new i2c API (since initial testing suggests problems interacting with the mt2060). Maintainers can enable the use of the new i2c API by putting the following into their frontend initialization: struct dib0700_state *st = adap->dev->priv; st->fw_use_new_i2c_api = 1; Also note that the code expects i2c repeated start to be supported. If the i2c slave does not support repeated start, i2c messsages should have the I2C_M_NOSTART flag set. Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new firmware fixing the issue as well as example i2c code utilizing the interface. Signed-off-by:
-
Finn Thain authored
Thanks to Ilia Penev for the tip-off that this device is much the same as (identical to?) a Terratec Cinergy HT USB XE, and for the firmware hints: http://linuxtv.org/pipermail/linux-dvb/2008-August/028108.html DVB functionality tested OK with xine using the usual dib0700 firmware. This diff is based on the latest latest linuxtv.org v4l-dvb mercurial repo. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Laurent Pinchart authored
Auto-update controls are never marked is loaded to prevent uvc_get_ctrl from loading the control value from the cache. When setting a composite (mapped to several V4L2 controls) auto-update UVC control, the driver updates the control cache value before processing each V4L2 control, overwriting the previously set V4L2 control. This fixes the problem by marking all controls as loaded in uvc_set_ctrl regardless of their type and resetting the loaded flag in uvc_commit_ctrl for auto-update controls. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Laurent Pinchart authored
This declares all missing UVC camera and processing unit controls. V4L2 mappings are not supported yet for those controls. Signed-off-by:
-
David Ellingsworth authored
instead of register_chrdev", the internal reference count is no longer necessary in order to free the internal stk_webcam struct. This patch removes the reference counter from the stk_webcam struct and frees the struct via the video_device release callback. It also fixes an associated bug in stk_camera_probe which could result from video_unregister_device being called before video_register_device. Lastly, it simplifies access to the stk_webcam struct in several places. This patch should apply cleanly against the "working" branch of the v4l-dvb git repository. This patch is identical to the patch I sent a couple of months back titled "stk-webcam: Fix video_device handling" except that it has been rebased against current modifications to stk-webcam and it no longer depends on any other outstanding patches. Acked-by:
Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by:
David Ellingsworth <david@identd.dyndns.org> Signed-off-by:
-
Andrew Morton authored
drivers/media/video/tda9840.c: In function 'tda9840_command': drivers/media/video/tda9840.c:152: warning: 'result' is used uninitialized in this function [mchehab@redhat.com: Fix conflict with another patch that were meant to solve the warning] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ming Lei authored
The status[] is part of uvc_device structure. We can't make sure the address of status is at a cache-line boundary in all archs,so status[] might share a cache-line with some fields in uvc_structure. This can lead to some cache coherence issues(http://lwn.net/Articles/2265/). Use dynamically allocated buffer instead. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-by:
-
Laurent Pinchart authored
When streaming in a fixed size format the driver sets a flag in the uvc_queue structure to drop incomplete incoming frames. The flag wasn't cleared when switching to a variable size format, which resulted in a broken 'MJPEG after YUV'. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
hermann pitton authored
after looking it up, all rants about the 80 columns restriction seem to be in vain. After changing the card's name it are now "only" seven new lines in the tiny DVB-T/DVB-S switch function. saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:08.0, rev: 209, irq: 18, latency: 32, mmio: 0xfdef7000 saa7133[0]: subsystem: 1043:4878, board: Asus Tiger 3in1 [card=147,autodetected] saa7133[0]: board init: gpio is 200000 tuner' 2-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 43 10 78 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d7 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 28 00 c2 96 16 03 02 c0 1c ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x16 [???] saa7133[0]: i2c scan: found device @ 0x1c [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] tda829x 2-004b: setting tuner address to 61 tda829x 2-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10086 DVB-S)... The board init gpio is 0x0, 0x200000 is from previously unloading with antenna_switch = 1. It needs firmware for the tda10046 and analog sound needs saa7134-alsa. I have support for one more board and need to fix the first revision of the Asus Tiger DVB-T hybrid. DVB-T currently hangs on the male radio antenna input, also some small other stuff. Please report any issues with this patch, the next are depending on this one. saa7134: add support for the triple Asus Tiger 3in1 Signed-off-by:
-
Igor M. Liplianin authored
Add support for ST STV0288 demodulator and cards with it, such as TeVii S420. Patch is co-authored with Georg Acher <acher@baycom.de> Signed-off-by:
Georg Acher <acher@baycom.de> Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Steven Toth authored
We don't want to push the ISDB-T definitions into the kernel until we have a high level of confidence in the ISDB-T API. More testing is required before this code is released. Signed-off-by:
Steven Toth <stoth@linuxtv.org> Signed-off-by:
-
Steven Toth authored
Signed-off-by:
-
Steven Toth authored
Patch by Darron Broad. Signed-off-by:
-
Steven Toth authored
Patch provided by Darron Broad. Signed-off-by:
-
Steven Toth authored
Patch provided by Darron Broad Signed-off-by:
-
Oleg Roitburd authored
Added support for TBS 8920 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by:
Oleg Roitburd <oroitburd@gmail.com> Signed-off-by:
-
Oleg Roitburd authored
Added support for Omicom SS4 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by:
-
Igor M. Liplianin authored
Add support for USB card modification with SI2109/2110 demodulator. Signed-off-by:
-
Igor M. Liplianin authored
Add support for Silicon Laboratories SI2109/2110 demodulator and cards with it, such as DvbWorld PCI2002. Signed-off-by:
-
Darron Broad authored
From the author: This patch-set fixes remote control issues I have experienced with hauppauge drivers in Linux since the PVR-350 and now with both a NOVA-S+ and HVR-4000. It has also been confirmed to work with an HVR-1300 user who had exactly the same issue. Hauppage remote controls use RC5. RC5 has a bit-field which represents the target device. The hauppauge windows drivers have a registry key which can enable filtering, but the linux drivers will accept any target device in this bit field for internal processing. This causes problems with setups such as mythtv where remote control key presses destined for the TV (target = 0) are interpreted by the kernel and subsequenctly LIRC then mythtv. Of the remote controls I have to hand (wintv black, pvr/hvr silver) the hauppauge remotes send one of two device targets ids, these are interpreted by the patch which then filters out any non hauppauge addresses. Signed-off-by:
Darron Broad <darron@kewl.org> Signed-off-by:
-
Darron Broad authored
From the author: Here is a simple patch detailing some reverse engineered register detail lost in my latest merge. The comments in the code refer to this register but it is never defined. This corrects this. Signed-off-by:
-
Igor M. Liplianin authored
Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. For example, HVR4000 uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG stream was broken on that cards for symbol rates > 30000 kSyms/s. Signed-off-by:
-
