lguest never checked for pending interrupts when enabling interrupts, and
things still worked.  However, it makes a significant difference to TCP
performance, so it's time we fixed it by introducing a pending_irq flag
and checking it on irq_restore and irq_enable.

These two routines are now too big to patch into the 8/10 bytes
patch space, so we drop that code.

Note: The high latency on interrupt delivery had a very curious
effect: once everything else was optimized, networking without GSO was
faster than networking with GSO, since more interrupts were sent and
hence a greater chance of one getting through to the Guest!

Note2: (Almost) Closing the same loophole for iret doesn't have any
measurable effect, so I'm leaving that patch for the moment.

Before:
	1GB tcpblast Guest->Host:		30.7 seconds
	1GB tcpblast Guest->Host (no GSO):	76.0 seconds

After:
	1GB tcpblast Guest->Host:		6.8 seconds
	1GB tcpblast Guest->Host (no GSO):	27.8 seconds
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

When the Guest does the LHCALL_HALT hypercall, we go to sleep, expecting
that a timer or the Waker will wake_up_process() us.

But we do it in a stupid way, leaving a classic missing wakeup race.

So split maybe_do_interrupt() into interrupt_pending() and
try_deliver_interrupt(), and check maybe_do_interrupt() and the
"break_out" flag before calling schedule.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

20887611 (lguest: notify on empty) introduced
lguest support for the VIRTIO_F_NOTIFY_ON_EMPTY flag, but in fact it turned on
interrupts all the time.

Because we always process one buffer at a time, the inflight count is always 0
when call trigger_irq and so we always ignore VRING_AVAIL_F_NO_INTERRUPT from
the Guest.

It should be looking to see if there are more buffers in the Guest's queue:
if it's empty, then we force an interrupt.

This makes little difference, since we usually have an empty queue; but
that's the subject of another patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The Launcher could be inside the Guest on another CPU; wake_up_process
will do nothing because it is "running".  kick_process will knock it
back into our kernel in this case, otherwise we'll miss it until the
next guest exit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

lguest needs kick_process: wake_up_process() does nothing if a process
is running, which isn't sufficient (we need it in the kernel).

And lguest support is usually modular.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>

Since the Launcher process runs the Guest, it doesn't have to be very
serious about its barriers: the Guest isn't running while we are (Guest
is UP).

Before we change to use threads to service devices, we need to fix this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Copy from arch/x86/kernel/irqinit_32.c: we don't use the vectors beyond
LGUEST_IRQS (if any), but we might as well set them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

We hand the /dev/lguest fd everywhere; it's far neater to just make it
a global (it already is, in fact, hidden in the waker_fds struct).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

We can't trust the values in the device descriptor table once the
guest has booted, so keep local copies.  They could set them to
strange values then cause us to segv (they're 8 bit values, so they
can't make our pointers go too wild).

This becomes more important with the following patches which read them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Fix kernel-doc warnings in recently changed block/ source code.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (87 commits)
  nilfs2: get rid of bd_mount_sem use from nilfs
  nilfs2: correct exclusion control in nilfs_remount function
  nilfs2: simplify remaining sget() use
  nilfs2: get rid of sget use for checking if current mount is present
  nilfs2: get rid of sget use for acquiring nilfs object
  nilfs2: remove meaningless EBUSY case from nilfs_get_sb function
  remove the call to ->write_super in __sync_filesystem
  nilfs2: call nilfs2_write_super from nilfs2_sync_fs
  jffs2: call jffs2_write_super from jffs2_sync_fs
  ufs: add ->sync_fs
  sysv: add ->sync_fs
  hfsplus: add ->sync_fs
  hfs: add ->sync_fs
  fat: add ->sync_fs
  ext2: add ->sync_fs
  exofs: add ->sync_fs
  bfs: add ->sync_fs
  affs: add ->sync_fs
  sanitize ->fsync() for affs
  repair bfs_write_inode(), switch bfs to simple_fsync()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: remove unecessary include of thread_info.h in entry.S
  m68knommu: enumerate INIT_THREAD fields properly
  headers_check fix: m68k, swab.h
  arch/m68knommu: Convert #ifdef DEBUG printk(KERN_DEBUG to pr_debug(
  m68knommu: remove obsolete reset code
  m68knommu: move CPU reset code for the 5272 ColdFire into its platform code
  m68knommu: move CPU reset code for the 528x ColdFire into its platform code
  m68knommu: move CPU reset code for the 527x ColdFire into its platform code
  m68knommu: move CPU reset code for the 523x ColdFire into its platform code
  m68knommu: move CPU reset code for the 520x ColdFire into its platform code
  m68knommu: add CPU reset code for the 532x ColdFire
  m68knommu: add CPU reset code for the 5249 ColdFire
  m68knommu: add CPU reset code for the 5206e ColdFire
  m68knommu: add CPU reset code for the 5206 ColdFire
  m68knommu: add CPU reset code for the 5407 ColdFire
  m68knommu: add CPU reset code for the 5307 ColdFire
  m68knommu: merge system reset for code ColdFire 523x family
  m68knommu: fix system reset for ColdFire 527x family

zalloc_cpumask_var already cleared it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

So we make sure MAXSMP gets a cleared cpumask
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 925d519a ("perf_counter:
unify and fix delayed counter wakeup") added global definitions.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This will remove every bd_mount_sem use in nilfs.

The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

nilfs_remount() changes mount state of a superblock instance.  Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().

Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:

  1. bdev->bd_mount_sem
  2. sb->s_umount  (sget acquires)

and nilfs_remount() holds:

  1. sb->s_umount  (locked by the caller in vfs)
  2. bdev->bd_mount_sem

To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().

With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved.  And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This simplifies the test function passed on the remaining sget()
callsite in nilfs.

Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device.  This elimination uses a back pointer to the
current mount added to nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This will change the way to obtain nilfs object in nilfs_get_sb()
function.

Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.

This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The following EBUSY case in nilfs_get_sb() is meaningless.  Indeed,
this error code is never returned to the caller.

    if (!s->s_root) {
          ...
    } else if (!(s->s_flags & MS_RDONLY)) {
        err = -EBUSY;
    }

This simply removes the else case.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Now that all filesystems provide ->sync_fs methods we can change
__sync_filesystem to only call ->sync_fs.

This gives us a clear separation between periodic writeouts which
are driven by ->write_super and data integrity syncs that go
through ->sync_fs. (modulo file_fsync which is also going away)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The call to ->write_super from __sync_filesystem will go away, so make
sure jffs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.  Factor out common code
between affs_put_super, affs_write_super and the new affs_sync_fs into
a helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

unfortunately, for affs (especially for affs directories) we have
no real way to keep track of metadata ownership.  So we have to
do more or less what file_fsync() does, but we do *not* need to
call write_super() there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Missing conversion to host-endian before doing shifts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>