- 18 Apr, 2018 3 commits
-
-
Jani Nikula authored
The VBT contains the DDC pin to use for specific ports. Alas, sometimes the field appears to contain bogus data, and while we check for it later on in intel_gmbus_get_adapter() we fail to check the returned NULL on errors. Oops results. The simplest approach seems to be to catch and ignore the bogus DDC pins already at the VBT parsing phase, reverting to fixed per port default pins. This doesn't guarantee display working, but at least it prevents the oops. And we continue to be fuzzed by VBT. One affected machine is Dell Latitude 5590 where a BIOS upgrade added invalid DDC pins. Typical backtrace: [ 35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin)) [ 35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461450] Workqueue: events_unbound async_run_entry_fn [ 35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286 [ 35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960 [ 35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246 [ 35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000 [ 35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000 [ 35.461477] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461479] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461486] Call Trace: [ 35.461501] intel_hdmi_set_edid+0x37/0x27f [i915] [ 35.461515] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461518] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461521] drm_setup_crtcs+0x129/0xa6a [ 35.461523] ? __switch_to_asm+0x34/0x70 [ 35.461525] ? __switch_to_asm+0x34/0x70 [ 35.461527] ? __switch_to_asm+0x40/0x70 [ 35.461528] ? __switch_to_asm+0x34/0x70 [ 35.461529] ? __switch_to_asm+0x40/0x70 [ 35.461531] ? __switch_to_asm+0x34/0x70 [ 35.461532] ? __switch_to_asm+0x40/0x70 [ 35.461534] ? __switch_to_asm+0x34/0x70 [ 35.461536] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461538] ? __switch_to_asm+0x40/0x70 [ 35.461541] ? _cond_resched+0x10/0x33 [ 35.461557] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461560] async_run_entry_fn+0x2e/0xf5 [ 35.461563] process_one_work+0x15b/0x364 [ 35.461565] worker_thread+0x2c/0x3a0 [ 35.461567] ? process_one_work+0x364/0x364 [ 35.461568] kthread+0x10c/0x122 [ 35.461570] ? _kthread_create_on_node+0x5d/0x5d [ 35.461572] ret_from_fork+0x35/0x40 [ 35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00 [ 35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461606] ---[ end trace 4fe1e63e2dd93373 ]--- [ 35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 35.461613] IP: i2c_transfer+0x4/0x86 [ 35.461614] PGD 0 P4D 0 [ 35.461616] Oops: 0000 [#1] SMP PTI [ 35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G W 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461628] Workqueue: events_unbound async_run_entry_fn [ 35.461630] RIP: 0010:i2c_transfer+0x4/0x86 [ 35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246 [ 35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001 [ 35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000 [ 35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002 [ 35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07 [ 35.461641] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461643] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461649] Call Trace: [ 35.461652] drm_do_probe_ddc_edid+0xb3/0x128 [ 35.461654] drm_get_edid+0xe5/0x38d [ 35.461669] intel_hdmi_set_edid+0x45/0x27f [i915] [ 35.461684] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461687] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461689] drm_setup_crtcs+0x129/0xa6a [ 35.461691] ? __switch_to_asm+0x34/0x70 [ 35.461693] ? __switch_to_asm+0x34/0x70 [ 35.461694] ? __switch_to_asm+0x40/0x70 [ 35.461696] ? __switch_to_asm+0x34/0x70 [ 35.461697] ? __switch_to_asm+0x40/0x70 [ 35.461698] ? __switch_to_asm+0x34/0x70 [ 35.461700] ? __switch_to_asm+0x40/0x70 [ 35.461701] ? __switch_to_asm+0x34/0x70 [ 35.461703] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461705] ? __switch_to_asm+0x40/0x70 [ 35.461707] ? _cond_resched+0x10/0x33 [ 35.461724] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461727] async_run_entry_fn+0x2e/0xf5 [ 35.461729] process_one_work+0x15b/0x364 [ 35.461731] worker_thread+0x2c/0x3a0 [ 35.461733] ? process_one_work+0x364/0x364 [ 35.461734] kthread+0x10c/0x122 [ 35.461736] ? _kthread_create_on_node+0x5d/0x5d [ 35.461738] ret_from_fork+0x35/0x40 [ 35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65 [ 35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30 [ 35.461757] CR2: 0000000000000010 [ 35.461759] ---[ end trace 4fe1e63e2dd93374 ]--- Based on a patch by Fei Li. v2: s/reverting/sticking/ (Chris) Cc: stable@vger.kernel.org Cc: Fei Li <fei.li@intel.com> Co-developed-by:
Fei Li <fei.li@intel.com> Reported-by:
Pavel Nakonechnyi <zorg1331@gmail.com> Reported-and-tested-by:
Seweryn Kokot <sewkokot@gmail.com> Reported-and-tested-by:
Laszlo Valko <valko@linux.karinthy.hu> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-1-jani.nikula@intel.com (cherry picked from commit f212bf9a) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Tvrtko Ursulin authored
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests on some CI machines I have concluded that: a) the PMU readout of RC6 can race against runtime PM transitions, and b) there are other reasons than being runtime suspended which can cause intel_runtime_pm_get_if_in_use to fail. Therefore when estimating RC6 the code needs to assert we are indeed in suspended state, and if not, the best we can do is return the last known RC6 value. Without this check we can calculate the estimated value based on un- initialized or inappropriate internal state, which can result in over- estimation, or in any case incorrect value being returned. v2: * Re-arrange the code a bit to avoid second unlock and return branch. (Chris Wilson) v3: * Insert some strategic blank lines and improve commit msg. (Chris Wilson) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 1fe699e3 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010 Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Xidong Wang authored
Along the eb_lookup_vmas() error path, the return value from kmem_cache_alloc() was freed using kfree(). Fix it to use the proper kmem_cache_free() instead. Fixes: d1b48c1e ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by:
Xidong Wang <wangxidong_97@163.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v4.14+ Reviewed-by:
-
- 04 Apr, 2018 2 commits
-
-
Chris Wilson authored
When cancelling the requests and clearing out the ports following a successful preemption completion, also clear the active flag. I had assumed that all preemptions would be followed by an immediate dequeue (preserving the active user flag), but under rare circumstances we may be triggering a preemption for the second port only for it to have completed before the preemotion kicks in; leaving execlists->active set even though the system is now idle. We can clear the flag inside the common execlists_cancel_port_requests() as the other users also expect the semantics of active being cleared. Fixes: f6322edd ("drm/i915/preemption: Allow preemption between submission ports") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180324125829.27026-1-chris@chris-wilson.co.uk (cherry picked from commit eed7ec52) Signed-off-by:
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-fixes-2018-04-03 - fix unhandled vfio ioctl return value (Gerd) - no-op user interrupt for vGPU (Zhipeng) - fix ggtt dma unmap (Changbin) - fix warning in fb decoder (Xiong) - dmabuf drm_format_mod fix (Tina) - misc cleanup Signed-off-by:
-
- 30 Mar, 2018 5 commits
-
-
Tina Zhang authored
Add drm_format_mod update, which is omitted. Fixes: e546e281("drm/i915/gvt: Dmabuf support for GVT-g") Cc: stable@vger.kernel.org Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Xiong Zhang authored
Much error exist in host dmesg during guest boot up with loca display enabled. gvt: vgpu 1: invalid range gmadr 0x0 size 0x0 This error happens when qemu get dmabuf info in case that the virtual display plane is enabled but its base address is an invalid 0, such case may be true before guest enable its plane. At this moment, its state is copied from host where the plane may be enabled. This patch disable primary/sprite/cursor plane at virtual display initialization, so intel_vgpu_decode_primary/cursor/sprite could return early as plane is disabled, then plane base check is skipped and error message disapper. Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by:
-
Xiong Zhang authored
Much error message exist in host dmesg when guest boot up with local display enabled. [ 167.680011] gvt: vgpu 1: invalid range gmadr 0x0 size 0x0 [ 167.680013] gvt: vgpu 1: invalid gma address: 0 The second error line duplicate with the first error line, so this patch remove this redundant error message and make the next error message much clearer. Signed-off-by:
-
Changbin Du authored
Ditto, don't forget ggtt entries during reset. Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
-
Changbin Du authored
We have canceled dma map for ppgtt entries. Also we need to do it for ggtt entries when them are invalidated. This can fix task hung issue as: [13517.791767] INFO: task gvt_service_thr:1081 blocked for more than 120 seconds. [13517.792584] Not tainted 4.14.15+ #3 [13517.793417] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [13517.794267] gvt_service_thr D 0 1081 2 0x80000000 [13517.795132] Call Trace: [13517.795996] ? __schedule+0x493/0x77b [13517.796859] schedule+0x79/0x82 [13517.797740] schedule_preempt_disabled+0x5/0x6 [13517.798614] __mutex_lock.isra.0+0x2b5/0x445 [13517.799504] ? __switch_to_asm+0x24/0x60 [13517.800381] ? intel_gvt_cleanup+0x10/0x10 [13517.801261] ? intel_gvt_schedule+0x19/0x2b9 [13517.802107] intel_gvt_schedule+0x19/0x2b9 [13517.802954] ? intel_gvt_cleanup+0x10/0x10 [13517.803824] gvt_service_thread+0xe3/0x10d [13517.804704] ? wait_woken+0x68/0x68 [13517.805588] kthread+0x118/0x120 [13517.806478] ? kthread_create_on_node+0x3a/0x3a [13517.807381] ? call_usermodehelper_exec_async+0x113/0x11a [13517.808307] ret_from_fork+0x35/0x40 v3: split out ggtt reset case. v2: also unmap ggtt during reset. Signed-off-by:
-
- 28 Mar, 2018 6 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
- Mask mode type garbage from userspace (Ville) Something went wrong on the misc tree side, but I'll pull the patch directly. * 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc: drm: Fix uabi regression by allowing garbage mode->type from userspace
-
Zhipeng Gong authored
GVT-g dispatches request to host i915 and depends on i915 notify ring interrupt mechanism to check completion of request. For now MI_USER_INTERRUPT in guest requests is passed through in GVT-g cmd parser and i915 does not use it, which causes unnecessary interrupt handling in i915. On the other hand, if several requests from guest are combined into one request in and contain MI_USER_INTERRUPT in the middle of combined request. GVT-g still has to wait on the whole request to complete to inject user interrupts to guest. This patch makes all the MI_USER_INTERRUPT nop to save some interrupt handling. Here is test result to run glmark2 on guest for 10 seconds: host master interrupts number is reduced from 16021 to 11162 host user interrupts number is reduced from 7936 to 3536 v2: - revise commit message. (Kevin) Reviewed-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Zhipeng Gong <zhipeng.gong@intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1466154 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
- GPUVM support for dGPUs - KFD events support for dGPUs - Fix live-lock situation when restoring multiple evicted processes - Fix VM page table allocation on large-bar systems - Fix for build failure on frv architecture * tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Use ordered workqueue to restore processes drm/amdgpu: Fix acquiring VM on large-BAR systems drm/amdkfd: Add module option for testing large-BAR functionality drm/amdkfd: Kmap event page for dGPUs drm/amdkfd: Add ioctls for GPUVM memory management drm/amdkfd: Add TC flush on VMID deallocation for Hawaii drm/amdkfd: Allocate CWSR trap handler memory for dGPUs drm/amdkfd: Add per-process IDR for buffer handles drm/amdkfd: Aperture setup for dGPUs drm/amdkfd: Remove limit on number of GPUs drm/amdkfd: Populate DRM render device minor drm/amdkfd: Create KFD VMs on demand drm/amdgpu: Add kfd2kgd interface to acquire an existing VM drm/amdgpu: Add helper to turn an existing VM into a compute VM drm/amdgpu: Fix initial validation of PD BO for KFD VMs drm/amdgpu: Move KFD-specific fields into struct amdgpu_vm drm/amdkfd: fix uninitialized variable use drm/amdkfd: add missing include of mm.h
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Display fixes for booting with MST hub lid closed and display freezing after hibernation (fd.o bugs 105470 & 105196) - Fix for a very rare interrupt handling race resulting in GPU hang * tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Fix hibernation with ACPI S0 target state drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt drm/i915: Specify which engines to reset following semaphore/event lockups drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
-
Dave Airlie authored
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
-
- 27 Mar, 2018 4 commits
-
-
Imre Deak authored
After commit dd9f31c7 Author: Imre Deak <imre.deak@intel.com> Date: Wed Aug 16 17:46:07 2017 +0300 drm/i915/gen9+: Set same power state before hibernation image save/restore during hibernation/suspend the power domain functionality got disabled, after which resume could leave it incorrectly disabled if the ACPI target state was S0 during suspend and i915 was not loaded by the loader kernel. This was caused by not considering if we resumed from hibernation as the condition for power domains reiniting. Fix this by simply tracking if we suspended power domains during system suspend and reinit power domains accordingly during resume. This will result in reiniting power domains always when resuming from hibernation, regardless of the platform and whether or not i915 is loaded by the loader kernel. The reason we didn't catch this earlier is that the enabled/disabled state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform and kernel config dependent: on my SKL the target state is S4 during PMSG_FREEZE and (with the driver loaded in the loader kernel) S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during PMSG_FREEZE but (contrary to this) power domains are not initialized during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or it's loaded but without the DMC firmware being available. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196 Reported-and-tested-by: amn-bas@hotmail.com Fixes: dd9f31c7 ("drm/i915/gen9+: Set same power state before hibernation image save/restore") Cc: amn-bas@hotmail.com Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322143642.26883-1-imre.deak@intel.com (cherry picked from commit 0f90603c) Signed-off-by:
-
Chris Wilson authored
We were relying on the uncached reads when processing the CSB to provide ourselves with the serialisation with the interrupt handler (so we could detect new interrupts in the middle of processing the old one). However, in commit 767a983a ("drm/i915/execlists: Read the context-status HEAD from the HWSP") those uncached reads were eliminated (on one path at least) and along with them our serialisation. The result is that we would very rarely miss notification of a new interrupt and leave a context-switch unprocessed, hanging the GPU. Fixes: 767a983a ("drm/i915/execlists: Read the context-status HEAD from the HWSP") Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk (cherry picked from commit 9153e6b7) Signed-off-by:
-
Chris Wilson authored
If the GPU is stuck waiting for an event or for a semaphore, we need to reset the GPU in order to recover. We have to tell the reset routine which engines we want reset, but we were still using the old interface and declaring it as "not-fatal". Fixes: 14b730fc ("drm/i915/tdr: Prepare error handler to accept mask of hung engines") Signed-off-by:
-
Dhinakaran Pandiyan authored
If bios sets up an MST output and hardware state readout code sees this is an SST configuration, when disabling the encoder we end up calling ->post_disable_dp() hook instead of the MST version. Consequently, we write to the DP_SET_POWER dpcd to set it D3 state. Further along when we try enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up the MST hub. This results in continuous link training failures which keep the system busy delaying boot. We could identify bios MST boot discrepancy and handle it accordingly but a simple way to solve this is to write to the DP_SET_POWER dpcd for MST too. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: 5ea2355a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
- 26 Mar, 2018 1 commit
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Last pull for 4.17. Highlights: - Vega12 support - A few more bug fixes and cleanups for powerplay * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (77 commits) drm/amd/pp: clean header file hwmgr.h drm/amd/pp: use mlck_table.count for array loop index limit drm/amdgpu: Add an ATPX quirk for hybrid laptop drm/amdgpu: fix spelling mistake: "asssert" -> "assert" drm/amd/pp: Add new asic support in pp_psm.c drm/amd/pp: Clean up powerplay code on Vega12 drm/amd/pp: Add smu irq handlers for legacy asics drm/amd/pp: Fix set wrong temperature range on smu7 drm/amdgpu: Don't change preferred domian when fallback GTT v5 drm/amdgpu: Fix NULL ptr on driver unload due to init failure. drm/amdgpu: fix "mitigate workaround for i915" drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init drm/amd/pp: Refine register_thermal_interrupt function drm/amdgpu: Remove wrapper layer of cgs irq handling drm/amd/powerplay: Return per DPM level clock drm/amd/powerplay: Remove the SOC floor voltage setting drm/amdgpu: no job timeout setting on compute queues drm/amdgpu: add vega12 pci ids (v2) drm/amd/powerplay: add the hw manager for vega12 (v4) drm/amd/powerplay: add the smu manager for vega12 (v4) ...
-
- 25 Mar, 2018 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fix from Vinod Koul: "One small fix for stm32-dmamux fixing buffer overflow" * tag 'dmaengine-fix-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma: dmaengine: stm32-dmamux: fix a potential buffer overflow
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 and PTI fixes from Ingo Molnar: "Misc fixes: - fix EFI pagetables freeing - fix vsyscall pagetable setting on Xen PV guests - remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again - fix two binutils (ld) development version related incompatibilities - clean up breakpoint handling - fix an x86 self-test" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Don't use IST entry for #BP stack x86/efi: Free efi_pgd with free_pages() x86/vsyscall/64: Use proper accessor to update P4D entry x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk x86/boot/64: Verify alignment of the LOAD segment x86/build/64: Force the linker to use 2MB page size selftests/x86/ptrace_syscall: Fix for yet more glibc interference
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Make posix clock ID usage Spectre-safe" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timers: Protect posix clock array access against speculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two sched debug output related fixes: a console output fix and formatting fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Adjust newlines for better alignment sched/debug: Fix per-task line continuation for console output
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc kernel side fixes. Generic: - cgroup events counting fix x86: - Intel PMU truncated-parameter fix - RDPMC fix - API naming fix/rename - uncore driver big-hardware PCI enumeration fix - uncore driver filter constraint fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/cgroup: Fix child event counting bug perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers perf/x86/intel: Rename confusing 'freerunning PEBS' API and implementation to 'large PEBS' perf/x86/intel/uncore: Add missing filter constraint for SKX CHA event perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period() perf/x86/intel: Disable userspace RDPMC usage for large PEBS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Two fixes: tighten up a jump-labels warning to not trigger on certain modules and fix confusing (and non-existent) mutex API documentation" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Disable jump labels in __exit code locking/mutex: Improve documentation
-
Linus Torvalds authored
Tabs on a console with long lines do not wrap properly, so correctly account for the line length when computing the tab placement location. Reported-by:
James Holderness <j4_james@hotmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull mqueuefs revert from Eric Biederman: "This fixes a regression that came in the merge window for v4.16. The problem is that the permissions for mounting and using the mqueuefs filesystem are broken. The necessary permission check is missing letting people who should not be able to mount mqueuefs mount mqueuefs. The field sb->s_user_ns is set incorrectly not allowing the mounter of mqueuefs to remount and otherwise have proper control over the filesystem. Al Viro and I see the path to the necessary fixes differently and I am not even certain at this point he actually sees all of the necessary fixes. Given a couple weeks we can probably work something out but I don't see the review being resolved in time for the final v4.16. I don't want v4.16 shipping with a nasty regression. So unfortunately I am sending a revert" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: Revert "mqueue: switch to on-demand creation of internal mount"
-
Eric W. Biederman authored
This reverts commit 36735a6a. Aleksa Sarai <asarai@suse.de> writes: > [REGRESSION v4.16-rc6] [PATCH] mqueue: forbid unprivileged user access to internal mount > > Felix reported weird behaviour on 4.16.0-rc6 with regards to mqueue[1], > which was introduced by 36735a6a ("mqueue: switch to on-demand > creation of internal mount"). > > Basically, the reproducer boils down to being able to mount mqueue if > you create a new user namespace, even if you don't unshare the IPC > namespace. > > Previously this was not possible, and you would get an -EPERM. The mount > is the *host* mqueue mount, which is being cached and just returned from > mqueue_mount(). To be honest, I'm not sure if this is safe or not (or if > it was intentional -- since I'm not familiar with mqueue). > > To me it looks like there is a missing permission check. I've included a > patch below that I've compile-tested, and should block the above case. > Can someone please tell me if I'm missing something? Is this actually > safe? > > [1]: https://github.com/docker/docker/issues/36674 The issue is a lot deeper than a missing permission check. sb->s_user_ns was is improperly set as well. So in addition to the filesystem being mounted when it should not be mounted, so things are not allow that should be. We are practically to the release of 4.16 and there is no agreement between Al Viro and myself on what the code should looks like to fix things properly. So revert the code to what it was before so that we can take our time and discuss this properly. Fixes: 36735a6a ("mqueue: switch to on-demand creation of internal mount") Reported-by:
Felix Abecassis <fabecassis@nvidia.com> Reported-by:
Aleksa Sarai <asarai@suse.de> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com>
-
- 24 Mar, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Two fixes for pin control for v4.16: - Renesas SH-PFC: remove a duplicate clkout pin which was causing crashes - fix Samsung out of bounds exceptions" * tag 'pinctrl-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: samsung: Validate alias coming from DT pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[]
-
- 23 Mar, 2018 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull kprobe fixes from Steven Rostedt: "The documentation for kprobe events says that symbol offets can take both a + and - sign to get to befor and after the symbol address. But in actuality, the code does not support the minus. This fixes that issue, and adds a few more selftests to kprobe events" * tag 'trace-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests: ftrace: Add a testcase for probepoint selftests: ftrace: Add a testcase for string type with kprobe_event selftests: ftrace: Add probe event argument syntax testcase tracing: probeevent: Fix to support minus offset from symbol
-
Andy Lutomirski authored
There's nothing IST-worthy about #BP/int3. We don't allow kprobes in the small handful of places in the kernel that run at CPL0 with an invalid stack, and 32-bit kernels have used normal interrupt gates for #BP forever. Furthermore, we don't allow kprobes in places that have usergs while in kernel mode, so "paranoid" is also unnecessary. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
-
Felix Kuehling authored
Restoring multiple processes concurrently can lead to live-locks where each process prevents the other from validating all its BOs. v2: fix duplicate check of same variable Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Felix Kuehling authored
On large-BAR systems the VM page tables for compute are accessed by the CPU. Always allow CPU access to the page directory so that it can be used later by the CPU when a VM is converted to a compute VM. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Waiman Long authored
The efi_pgd is allocated as PGD_ALLOCATION_ORDER pages and therefore must also be freed as PGD_ALLOCATION_ORDER pages with free_pages(). Fixes: d9e9a641 ("x86/mm/pti: Allocate a separate user PGD") Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds authored
Pull MIPS fixes from James Hogan: "Another miscellaneous pile of MIPS fixes for 4.16: - lantiq: fixes for clocks and Amazon SE (4.14) - ralink: fix booting on MT7621 (4.5) - ralink: fix halt (3.9)" * tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: ralink: Fix booting on MT7621 MIPS: ralink: Remove ralink_halt() MIPS: lantiq: ase: Enable MFD_SYSCON MIPS: lantiq: Enable AHB Bus for USB MIPS: lantiq: Fix Danube USB clock
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fix from Alex Williamson: "Revert masking INTx where it cannot be enabled - it plays poorly with SR-IOV VFs and presumes DisINTx support" * tag 'vfio-v4.16-rc7' of git://github.com/awilliam/linux-vfio: Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Boris Brezillon: - Fix several problems in the fsl_ifc NAND controller driver - Fix misuse of mtd_ooblayout_ecc() in mtdchar.c * tag 'mtd/fixes-for-4.16-rc7' of git://git.infradead.org/linux-mtd: mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0 mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0 mtd: nand: fsl_ifc: Fix nand waitfunc return value mtdchar: fix usage of mtd_ooblayout_ecc()
-
