Pull drm fixes from Dave Airlie:
 "Regular fixes pull, some amdkfd, amdgpu, etnaviv, sun4i, qxl, tegra
  fixes.

  I've got an outstanding pull for i915 but it wasn't on an rc2 base so
  I wanted to ship these out first, I might get to it before rc3 or I
  might not"

* tag 'drm-fixes-for-v4.14-rc3' of git://people.freedesktop.org/~airlied/linux:
  drm/tegra: trace: Fix path to include
  qxl: fix framebuffer unpinning
  drm/sun4i: cec: Enable back CEC-pin framework
  drm/amdkfd: Print event limit messages only once per process
  drm/amdkfd: Fix kernel-queue wrapping bugs
  drm/amdkfd: Fix incorrect destroy_mqd parameter
  drm/radeon: disable hard reset in hibernate for APUs
  drm/amdgpu: revert tile table update for oland
  etnaviv: fix gem object list corruption
  etnaviv: fix submit error path
  qxl: fix primary surface handling
  drm/amdkfd: check for null dev to avoid a null pointer dereference

Pull IOMMU fixes from Joerg Roedel:

 - A comment fix for 'struct iommu_ops'

 - Format string fixes for AMD IOMMU, unfortunatly I missed that during
   review.

 - Limit mediatek physical addresses to 32 bit for v7s to fix a warning
   triggered in io-page-table code.

 - Fix dma-sync in io-pgtable-arm-v7s code

* tag 'iommu-fixes-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix comment for iommu_ops.map_sg
  iommu/amd: pr_err() strings should end with newlines
  iommu/mediatek: Limit the physical address in 32bit for v7s
  iommu/io-pgtable-arm-v7s: Need dma-sync while there is no QUIRK_NO_DMA

Pull arm64 fixes from Catalin Marinas:

 - SPsel register initialisation on reset as the architecture defines
   its state as unknown

 - Use READ_ONCE when dereferencing pmd_t pointers to avoid race
   conditions in page_vma_mapped_walk() (or fast GUP) with concurrent
   modifications of the page table

 - Avoid invoking the mm fault handling code for kernel addresses (check
   against TASK_SIZE) which would otherwise result in calling
   might_sleep() in atomic context

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fault: Route pte translation faults via do_translation_fault
  arm64: mm: Use READ_ONCE when dereferencing pointer to pte table
  arm64: Make sure SPsel is always set

Pull xen fixes from Juergen Gross:

 - avoid a warning when compiling with clang

 - consider read-only bits in xen-pciback when writing to a BAR

 - fix a boot crash of pv-domains

* tag 'for-linus-4.14c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/mmu: Call xen_cleanhighmap() with 4MB aligned for page tables mapping
  xen-pciback: relax BAR sizing write value check
  x86/xen: clean up clang build warning

Pull kvm fixes from Paolo Bonzini:
 "Mixed bugfixes. Perhaps the most interesting one is a latent bug that
  was finally triggered by PCID support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm/x86: Handle async PF in RCU read-side critical sections
  KVM: nVMX: Fix nested #PF intends to break L1's vmlauch/vmresume
  KVM: VMX: use cmpxchg64
  KVM: VMX: simplify and fix vmx_vcpu_pi_load
  KVM: VMX: avoid double list add with VT-d posted interrupts
  KVM: VMX: extract __pi_post_block
  KVM: PPC: Book3S HV: Check for updated HDSISR on P9 HDSI exception
  KVM: nVMX: fix HOST_CR3/HOST_CR4 cache

Merge branch 'fixes-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull keys fixes from James Morris:
 "Notable here is a rewrite of big_key crypto by Jason Donenfeld to
  address some issues in the original code.

  From Jason's commit log:
   "This started out as just replacing the use of crypto/rng with
    get_random_bytes_wait, so that we wouldn't use bad randomness at
    boot time. But, upon looking further, it appears that there were
    even deeper underlying cryptographic problems, and that this seems
    to have been committed with very little crypto review. So, I rewrote
    the whole thing, trying to keep to the conventions introduced by the
    previous author, to fix these cryptographic flaws."

  There has been positive review of the new code by Eric Biggers and
  Herbert Xu, and it passes basic testing via the keyutils test suite.
  Eric also manually tested it.

  Generally speaking, we likely need to improve the amount of crypto
  review for kernel crypto users including keys (I'll post a note
  separately to ksummit-discuss)"

* 'fixes-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security/keys: rewrite all of big_key crypto
  security/keys: properly zero out sensitive key material in big_key
  KEYS: use kmemdup() in request_key_auth_new()
  KEYS: restrict /proc/keys by credentials at open time
  KEYS: reset parent each time before searching key_user_tree
  KEYS: prevent KEYCTL_READ on negative key
  KEYS: prevent creating a different user's keyrings
  KEYS: fix writing past end of user-supplied buffer in keyring_read()
  KEYS: fix key refcount leak in keyctl_read_key()
  KEYS: fix key refcount leak in keyctl_assume_authority()
  KEYS: don't revoke uninstantiated key in request_key_auth_new()
  KEYS: fix cred refcount leak in request_key_auth_new()

We currently route pte translation faults via do_page_fault, which elides
the address check against TASK_SIZE before invoking the mm fault handling
code. However, this can cause issues with the path walking code in
conjunction with our word-at-a-time implementation because
load_unaligned_zeropad can end up faulting in kernel space if it reads
across a page boundary and runs into a page fault (e.g. by attempting to
read from a guard region).

In the case of such a fault, load_unaligned_zeropad has registered a
fixup to shift the valid data and pad with zeroes, however the abort is
reported as a level 3 translation fault and we dispatch it straight to
do_page_fault, despite it being a kernel address. This results in calling
a sleeping function from atomic context:

  BUG: sleeping function called from invalid context at arch/arm64/mm/fault.c:313
  in_atomic(): 0, irqs_disabled(): 0, pid: 10290
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  [...]
  [<ffffff8e016cd0cc>] ___might_sleep+0x134/0x144
  [<ffffff8e016cd158>] __might_sleep+0x7c/0x8c
  [<ffffff8e016977f0>] do_page_fault+0x140/0x330
  [<ffffff8e01681328>] do_mem_abort+0x54/0xb0
  Exception stack(0xfffffffb20247a70 to 0xfffffffb20247ba0)
  [...]
  [<ffffff8e016844fc>] el1_da+0x18/0x78
  [<ffffff8e017f399c>] path_parentat+0x44/0x88
  [<ffffff8e017f4c9c>] filename_parentat+0x5c/0xd8
  [<ffffff8e017f5044>] filename_create+0x4c/0x128
  [<ffffff8e017f59e4>] SyS_mkdirat+0x50/0xc8
  [<ffffff8e01684e30>] el0_svc_naked+0x24/0x28
  Code: 36380080 d5384100 f9400800 9402566d (d4210000)
  ---[ end trace 2d01889f2bca9b9f ]---

Fix this by dispatching all translation faults to do_translation_faults,
which avoids invoking the page fault logic for faults on kernel addresses.

Cc: <stable@vger.kernel.org>
Reported-by: Ankit Jain <ankijain@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

On kernels built with support for transparent huge pages, different CPUs
can access the PMD concurrently due to e.g. fast GUP or page_vma_mapped_walk
and they must take care to use READ_ONCE to avoid value tearing or caching
of stale values by the compiler. Unfortunately, these functions call into
our pgtable macros, which don't use READ_ONCE, and compiler caching has
been observed to cause the following crash during ext4 writeback:

PC is at check_pte+0x20/0x170
LR is at page_vma_mapped_walk+0x2e0/0x540
[...]
Process doio (pid: 2463, stack limit = 0xffff00000f2e8000)
Call trace:
[<ffff000008233328>] check_pte+0x20/0x170
[<ffff000008233758>] page_vma_mapped_walk+0x2e0/0x540
[<ffff000008234adc>] page_mkclean_one+0xac/0x278
[<ffff000008234d98>] rmap_walk_file+0xf0/0x238
[<ffff000008236e74>] rmap_walk+0x64/0xa0
[<ffff0000082370c8>] page_mkclean+0x90/0xa8
[<ffff0000081f3c64>] clear_page_dirty_for_io+0x84/0x2a8
[<ffff00000832f984>] mpage_submit_page+0x34/0x98
[<ffff00000832fb4c>] mpage_process_page_bufs+0x164/0x170
[<ffff00000832fc8c>] mpage_prepare_extent_to_map+0x134/0x2b8
[<ffff00000833530c>] ext4_writepages+0x484/0xe30
[<ffff0000081f6ab4>] do_writepages+0x44/0xe8
[<ffff0000081e5bd4>] __filemap_fdatawrite_range+0xbc/0x110
[<ffff0000081e5e68>] file_write_and_wait_range+0x48/0xd8
[<ffff000008324310>] ext4_sync_file+0x80/0x4b8
[<ffff0000082bd434>] vfs_fsync_range+0x64/0xc0
[<ffff0000082332b4>] SyS_msync+0x194/0x1e8

This is because page_vma_mapped_walk loads the PMD twice before calling
pte_offset_map: the first time without READ_ONCE (where it gets all zeroes
due to a concurrent pmdp_invalidate) and the second time with READ_ONCE
(where it sees a valid table pointer due to a concurrent pmd_populate).
However, the compiler inlines everything and caches the first value in
a register, which is subsequently used in pte_offset_phys which returns
a junk pointer that is later dereferenced when attempting to access the
relevant pte.

This patch fixes the issue by using READ_ONCE in pte_offset_phys to ensure
that a stale value is not used. Whilst this is a point fix for a known
failure (and simple to backport), a full fix moving all of our page table
accessors over to {READ,WRITE}_ONCE and consistently using READ_ONCE in
page_vma_mapped_walk is in the works for a future kernel release.

Cc: Jon Masters <jcm@redhat.com>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: <stable@vger.kernel.org>
Fixes: f27176cf ("mm: convert page_mkclean_one() to use page_vma_mapped_walk()")
Tested-by: Richard Ruigrok <rruigrok@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Sasha Levin reported a WARNING:

| WARNING: CPU: 0 PID: 6974 at kernel/rcu/tree_plugin.h:329
| rcu_preempt_note_context_switch kernel/rcu/tree_plugin.h:329 [inline]
| WARNING: CPU: 0 PID: 6974 at kernel/rcu/tree_plugin.h:329
| rcu_note_context_switch+0x16c/0x2210 kernel/rcu/tree.c:458
...
| CPU: 0 PID: 6974 Comm: syz-fuzzer Not tainted 4.13.0-next-20170908+ #246
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
| 1.10.1-1ubuntu1 04/01/2014
| Call Trace:
...
| RIP: 0010:rcu_preempt_note_context_switch kernel/rcu/tree_plugin.h:329 [inline]
| RIP: 0010:rcu_note_context_switch+0x16c/0x2210 kernel/rcu/tree.c:458
| RSP: 0018:ffff88003b2debc8 EFLAGS: 00010002
| RAX: 0000000000000001 RBX: 1ffff1000765bd85 RCX: 0000000000000000
| RDX: 1ffff100075d7882 RSI: ffffffffb5c7da20 RDI: ffff88003aebc410
| RBP: ffff88003b2def30 R08: dffffc0000000000 R09: 0000000000000001
| R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003b2def08
| R13: 0000000000000000 R14: ffff88003aebc040 R15: ffff88003aebc040
| __schedule+0x201/0x2240 kernel/sched/core.c:3292
| schedule+0x113/0x460 kernel/sched/core.c:3421
| kvm_async_pf_task_wait+0x43f/0x940 arch/x86/kernel/kvm.c:158
| do_async_page_fault+0x72/0x90 arch/x86/kernel/kvm.c:271
| async_page_fault+0x22/0x30 arch/x86/entry/entry_64.S:1069
| RIP: 0010:format_decode+0x240/0x830 lib/vsprintf.c:1996
| RSP: 0018:ffff88003b2df520 EFLAGS: 00010283
| RAX: 000000000000003f RBX: ffffffffb5d1e141 RCX: ffff88003b2df670
| RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffb5d1e140
| RBP: ffff88003b2df560 R08: dffffc0000000000 R09: 0000000000000000
| R10: ffff88003b2df718 R11: 0000000000000000 R12: ffff88003b2df5d8
| R13: 0000000000000064 R14: ffffffffb5d1e140 R15: 0000000000000000
| vsnprintf+0x173/0x1700 lib/vsprintf.c:2136
| sprintf+0xbe/0xf0 lib/vsprintf.c:2386
| proc_self_get_link+0xfb/0x1c0 fs/proc/self.c:23
| get_link fs/namei.c:1047 [inline]
| link_path_walk+0x1041/0x1490 fs/namei.c:2127
...

This happened when the host hit a page fault, and delivered it as in an
async page fault, while the guest was in an RCU read-side critical
section.  The guest then tries to reschedule in kvm_async_pf_task_wait(),
but rcu_preempt_note_context_switch() would treat the reschedule as a
sleep in RCU read-side critical section, which is not allowed (even in
preemptible RCU).  Thus the WARN.

To cure this, make kvm_async_pf_task_wait() go to the halt path if the
PF happens in a RCU read-side critical section.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

------------[ cut here ]------------
 WARNING: CPU: 4 PID: 5280 at /home/kernel/linux/arch/x86/kvm//vmx.c:11394 nested_vmx_vmexit+0xc2b/0xd70 [kvm_intel]
 CPU: 4 PID: 5280 Comm: qemu-system-x86 Tainted: G        W  OE   4.13.0+ #17
 RIP: 0010:nested_vmx_vmexit+0xc2b/0xd70 [kvm_intel]
 Call Trace:
  ? emulator_read_emulated+0x15/0x20 [kvm]
  ? segmented_read+0xae/0xf0 [kvm]
  vmx_inject_page_fault_nested+0x60/0x70 [kvm_intel]
  ? vmx_inject_page_fault_nested+0x60/0x70 [kvm_intel]
  x86_emulate_instruction+0x733/0x810 [kvm]
  vmx_handle_exit+0x2f4/0xda0 [kvm_intel]
  ? kvm_arch_vcpu_ioctl_run+0xd2f/0x1c60 [kvm]
  kvm_arch_vcpu_ioctl_run+0xdab/0x1c60 [kvm]
  ? kvm_arch_vcpu_load+0x62/0x230 [kvm]
  kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? __fget+0xfc/0x210
  do_vfs_ioctl+0xa4/0x6a0
  ? __fget+0x11d/0x210
  SyS_ioctl+0x79/0x90
  entry_SYSCALL_64_fastpath+0x23/0xc2

A nested #PF is triggered during L0 emulating instruction for L2. However, it
doesn't consider we should not break L1's vmlauch/vmresme. This patch fixes
it by queuing the #PF exception instead ,requesting an immediate VM exit from
L2 and keeping the exception for L1 pending for a subsequent nested VM exit.

This should actually work all the time, making vmx_inject_page_fault_nested
totally unnecessary.  However, that's not working yet, so this patch can work
around the issue in the meanwhile.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'drm-misc-fixes-2017-09-28-1' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes

Driver Changes:
- qxl: fix primary surface and fb unpinning (Gerd)
- sun41: fix CEC_PIN config gate now that media has been merged (Hans)
- tegra: fix TRACE_INCLUDE_PATH (Thierry)

Cc: Thierry Reding <treding@nvidia.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Gerd Hoffmann <kraxel@redhat.com>

* tag 'drm-misc-fixes-2017-09-28-1' of git://anongit.freedesktop.org/git/drm-misc:
  drm/tegra: trace: Fix path to include
  qxl: fix framebuffer unpinning
  drm/sun4i: cec: Enable back CEC-pin framework
  qxl: fix primary surface handling

Pull ACPI fix from Rafael Wysocki:
 "This fixes an APEI problem that may cause a reported error to be
  missed due to a race condition"

* tag 'acpi-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / APEI: clear error status before acknowledging the error

Pull power management fixes from Rafael Wysocki:
 "These fix a deadlock in the operating performance points (OPP)
  framework introduced during the 4.11 cycle, more issues with duplicate
  device objects for cpufreq-dt and cpufreq documentation.

  Specifics:

   - Fix a deadlock in the operating performance points (OPP) framework
     caused by a notifier callback taking a lock that's already held by
     its caller (Viresh Kumar).

   - Prevent the ti-cpufreq and cpufreq-dt-platdev drivers from
     attempting to register conflicting device objects which triggers a
     warning from sysfs (Suniel Mahesh).

   - Drop a stale reference to a piece of intel_pstate documentation
     that's not in the tree any more (Rafael Wysocki)"

* tag 'pm-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: docs: Drop intel-pstate.txt from index.txt
  cpufreq: dt: Fix sysfs duplicate filename creation for platform-device
  PM / OPP: Call notifier without holding opp_table->lock

Pull xfs fixes from Darrick Wong:

 - fix various problems with the copy-on-write extent maps getting freed
   at the wrong time

 - fix printk format specifier problems

 - report zeroing operation outcomes instead of dropping them on the
   floor

 - fix some crashes when dio operations partially fail

 - fix a race condition between unwritten extent conversion & dio read

 - fix some incorrect tests in the inode log item processing

 - correct the delayed allocation space reservations on rmap filesystems

 - fix some problems checking for dax support

* tag 'xfs-4.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: revert "xfs: factor rmap btree size into the indlen calculations"
  xfs: Capture state of the right inode in xfs_iflush_done
  xfs: perag initialization should only touch m_ag_max_usable for AG 0
  xfs: update i_size after unwritten conversion in dio completion
  iomap_dio_rw: Allocate AIO completion queue before submitting dio
  xfs: validate bdev support for DAX inode flag
  xfs: remove redundant re-initialization of total_nr_pages
  xfs: Output warning message when discard option was enabled even though the device does not support discard
  xfs: report zeroed or not correctly in xfs_zero_range()
  xfs: kill meaningless variable 'zero'
  fs/xfs: Use %pS printk format for direct addresses
  xfs: evict CoW fork extents when performing finsert/fcollapse
  xfs: don't unconditionally clear the reflink flag on zero-block files

This reverts commit dbbccdc4.

It turns out that the "legacy" users aren't so legacy at all, and that
turning off the legacy ioctl will break the current Qt bluetooth stack
for bluetooth LE devices that were released just a couple of months ago.

So it's simply not true that this was a legacy interface that hasn't
been needed and is only limited to old legacy BT devices.  Because I
actually read Kconfig help messages, and actively try to turn off
features that I don't need, I turned the option off.

Then I spent _way_ too much time debugging BLE issues until I realized
that it wasn't the Qt and subsurface development that had broken one of
my dive computer BLE downloads, but simply my broken kernel config.

Maybe in a decade it will be true that this is a legacy interface.  And
maybe with a better help-text and correct dependencies, this kind of
legacy removal might be acceptable.  But as things are right now both
the commit message and the Kconfig help text were misleading, and the
Kconfig option had the wrong dependenencies.

There's no reason to keep that broken Kconfig option in the tree.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-apei:
  ACPI / APEI: clear error status before acknowledging the error

Pull rdma fixes from Doug Ledford:
 "Second -rc update for 4.14.

  Both Mellanox and Intel had a series of -rc fixes that landed this
  week. The Mellanox bunch is spread throughout the stack and not just
  in their driver, where as the Intel bunch was mostly in the hfi1
  driver. And, several of the fixes in the hfi1 driver were more than
  just simple 5 line fixes. As a result, the hfi1 driver fixes has a
  sizable LOC count.

  Everything else is as one would expect in an RC cycle in terms of LOC
  count. One item that might jump out and make you think "That's not an
  rc item" is the fix that corrects a typo. But, that change fixes a
  typo in a user visible API that was just added in this merge window,
  so if we fix it now, we can fix it. If we don't, the typo is in the
  API forever. Another that might not appear to be a fix at first glance
  is the Simplify mlx5_ib_cont_pages patch, but the simplification
  allows them to fix a bug in the existing function whenever the length
  of an SGE exceeded page size. We also had to revert one patch from the
  merge window that was wrong.

  Summary:

   - a few core fixes
   - a few ipoib fixes
   - a few mlx5 fixes
   - a 7-patch hfi1 related series"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver load
  IB/hfi1: On error, fix use after free during user context setup
  Revert "IB/ipoib: Update broadcast object if PKey value was changed in index 0"
  IB/hfi1: Return correct value in general interrupt handler
  IB/hfi1: Check eeprom config partition validity
  IB/hfi1: Only reset QSFP after link up and turn off AOC TX
  IB/hfi1: Turn off AOC TX after offline substates
  IB/mlx5: Fix NULL deference on mlx5_ib_update_xlt failure
  IB/mlx5: Simplify mlx5_ib_cont_pages
  IB/ipoib: Fix inconsistency with free_netdev and free_rdma_netdev
  IB/ipoib: Fix sysfs Pkey create<->remove possible deadlock
  IB: Correct MR length field to be 64-bit
  IB/core: Fix qp_sec use after free access
  IB/core: Fix typo in the name of the tag-matching cap struct

* pm-opp:
  PM / OPP: Call notifier without holding opp_table->lock

* pm-cpufreq:
  cpufreq: docs: Drop intel-pstate.txt from index.txt
  cpufreq: dt: Fix sysfs duplicate filename creation for platform-device

Pull seccomp fix from Kees Cook:
 "Fix refcounting bug in CRIU interface, noticed by Chris Salls (Oleg &
  Tycho)"

* tag 'seccomp-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()

This fixes a compilation failure on 32-bit systems.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When bootup a PVM guest with large memory(Ex.240GB), XEN provided initial
mapping overlaps with kernel module virtual space. When mapping in this space
is cleared by xen_cleanhighmap(), in certain case there could be an 2MB mapping
left. This is due to XEN initialize 4MB aligned mapping but xen_cleanhighmap()
finish at 2MB boundary.

When module loading is just on top of the 2MB space, got below warning:

WARNING: at mm/vmalloc.c:106 vmap_pte_range+0x14e/0x190()
Call Trace:
 [<ffffffff81117083>] warn_alloc_failed+0xf3/0x160
 [<ffffffff81146022>] __vmalloc_area_node+0x182/0x1c0
 [<ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
 [<ffffffff81145df7>] __vmalloc_node_range+0xa7/0x110
 [<ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
 [<ffffffff8103ca54>] module_alloc+0x64/0x70
 [<ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
 [<ffffffff810ac91e>] module_alloc_update_bounds+0x1e/0x80
 [<ffffffff810ac9a7>] move_module+0x27/0x150
 [<ffffffff810aefa0>] layout_and_allocate+0x120/0x1b0
 [<ffffffff810af0a8>] load_module+0x78/0x640
 [<ffffffff811ff90b>] ? security_file_permission+0x8b/0x90
 [<ffffffff810af6d2>] sys_init_module+0x62/0x1e0
 [<ffffffff815154c2>] system_call_fastpath+0x16/0x1b

Then the mapping of 2MB is cleared, finally oops when the page in that space is
accessed.

BUG: unable to handle kernel paging request at ffff880022600000
IP: [<ffffffff81260877>] clear_page_c_e+0x7/0x10
PGD 1788067 PUD 178c067 PMD 22434067 PTE 0
Oops: 0002 [#1] SMP
Call Trace:
 [<ffffffff81116ef7>] ? prep_new_page+0x127/0x1c0
 [<ffffffff81117d42>] get_page_from_freelist+0x1e2/0x550
 [<ffffffff81133010>] ? ii_iovec_copy_to_user+0x90/0x140
 [<ffffffff81119c9d>] __alloc_pages_nodemask+0x12d/0x230
 [<ffffffff81155516>] alloc_pages_vma+0xc6/0x1a0
 [<ffffffff81006ffd>] ? pte_mfn_to_pfn+0x7d/0x100
 [<ffffffff81134cfb>] do_anonymous_page+0x16b/0x350
 [<ffffffff81139c34>] handle_pte_fault+0x1e4/0x200
 [<ffffffff8100712e>] ? xen_pmd_val+0xe/0x10
 [<ffffffff810052c9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
 [<ffffffff81139dab>] handle_mm_fault+0x15b/0x270
 [<ffffffff81510c10>] do_page_fault+0x140/0x470
 [<ffffffff8150d7d5>] page_fault+0x25/0x30

Call xen_cleanhighmap() with 4MB aligned for page tables mapping to fix it.
The unnecessory call of xen_cleanhighmap() in DEBUG mode is also removed.

-v2: add comment about XEN alignment from Juergen.

References: https://lists.xen.org/archives/html/xen-devel/2012-07/msg01562.htmlSigned-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>

[boris: added 'xen/mmu' tag to commit subject]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Just like done in d2bd05d8 ("xen-pciback: return proper values during
BAR sizing") for the ROM BAR, ordinary ones also shouldn't compare the
written value directly against ~0, but consider the r/o bits at the
bottom (if any).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end
up using different filters. Once we drop ->siglock it is possible for
task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC.

Fixes: f8e529ed ("seccomp, ptrace: add support for dumping seccomp filters")
Reported-by: Chris Salls <chrissalls5@gmail.com>
Cc: stable@vger.kernel.org # needs s/refcount_/atomic_/ for v4.12 and earlier
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[tycho: add __get_seccomp_filter vs. open coding refcount_inc()]
Signed-off-by: Tycho Andersen <tycho@docker.com>
[kees: tweak commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>

Commit 33fc30b4 (cpufreq: intel_pstate: Document the current
behavior and user interface) dropped the intel-pstate.txt file
from Documentation/cpu-freq/, but it did not update the index.txt
file in there accordingly, so do that now.

Fixes: 33fc30b4 (cpufreq: intel_pstate: Document the current behavior and user interface)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

From David Howells:

"There are two sets of patches here:
 (1) A bunch of core keyrings bug fixes from Eric Biggers.

 (2) Fixing big_key to use safe crypto from Jason A. Donenfeld."

Currently we acknowledge errors before clearing the error status.
This could cause a new error to be populated by firmware in-between
the error acknowledgment and the error status clearing which would
cause the second error's status to be cleared without being handled.
So, clear the error status before acknowledging the errors.

Also, make sure to acknowledge the error if the error status read
fails.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

A few fixes for 4.14.  Nothing too major.

* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: disable hard reset in hibernate for APUs
  drm/amdgpu: revert tile table update for oland

Just two small etnaviv fixes, one fixing a list corruption, the other
fixing a NULL ptr deref in an error path.

* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
  etnaviv: fix gem object list corruption
  etnaviv: fix submit error path

Merge tag 'drm-amdkfd-fixes-2017-09-24' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes

It contains the following fixes:
- correct checking of return value
- send correct parameter to function (According to the parameter type)
- avoid spamming of dmesg log
- fix queue wrapping calculations

* tag 'drm-amdkfd-fixes-2017-09-24' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Print event limit messages only once per process
  drm/amdkfd: Fix kernel-queue wrapping bugs
  drm/amdkfd: Fix incorrect destroy_mqd parameter
  drm/amdkfd: check for null dev to avoid a null pointer dereference

Pull quota and isofs fixes from Jan Kara:
 "Two quota fixes (fallout of the quota locking changes) and an isofs
  build fix"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Fix quota corruption with generic/232 test
  isofs: fix build regression
  quota: add missing lock into __dquot_transfer()

Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update consists of:

   - fixes to several existing tests

   - a test for regression introduced by b9470c27 ("inet: kill
     smallest_size and smallest_port")

   - seccomp support for glibc 2.26 siginfo_t.h

   - fixes to kselftest framework and tests to run make O=dir use-case

   - fixes to silence unnecessary test output to de-clutter test results"

* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
  selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
  selftests: timers: set-timer-lat: fix hang when std out/err are redirected
  selftests/memfd: correct run_tests.sh permission
  selftests/seccomp: Support glibc 2.26 siginfo_t.h
  selftests: futex: Makefile: fix for loops in targets to run silently
  selftests: Makefile: fix for loops in targets to run silently
  selftests: mqueue: Use full path to run tests from Makefile
  selftests: futex: copy sub-dir test scripts for make O=dir run
  selftests: lib.mk: copy test scripts and test files for make O=dir run
  selftests: sync: kselftest and kselftest-clean fail for make O=dir case
  selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
  selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
  selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
  selftests: lib.mk: fix test executable status check to use full path
  selftests: Makefile: clear LDFLAGS for make O=dir use-case
  selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
  Makefile: kselftest and kselftest-clean fail for make O=dir case
  selftests/net: msg_zerocopy enable build with older kernel headers
  selftests: actually run the various net selftests
  selftest: add a reuseaddr test
  ...

Pull x86 fpu fixes and cleanups from Ingo Molnar:
 "This is _way_ more cleanups than fixes, but the bugs were subtle and
  hard to hit, and the primary reason for them existing was the
  unnecessary historical complexity of some of the x86/fpu interfaces.

  The first bunch of commits clean up and simplify the xstate user copy
  handling functions, in reaction to the collective head-scratching
  about the xstate user-copy handling code that leads up to the fix for
  this SkyLake xstate handling bug:

     0852b374: x86/fpu: Add FPU state copying quirk to handle XRSTOR failure on Intel Skylake CPUs

  The cleanups don't change any functionality, they just (hopefully)
  make it all clearer, more consistent, more debuggable and more robust.

  Note that most of the linecount increase comes from these commits,
  where we better split the user/kernel copy logic by having more
  variants, instead repeated fragile patterns of:

               if (kbuf) {
                       memcpy(kbuf + pos, data, copy);
               } else {
                       if (__copy_to_user(ubuf + pos, data, copy))
                               return -EFAULT;
               }

  The next bunch of commits simplify the FPU state-machine to get rid of
  old lazy-FPU idiosyncrasies - a defensive simplification to make all
  the code easier to review and fix. No change in functionality.

  Then there's a couple of additional debugging tweaks: static checker
  warning fix and move an FPU related warning to under WARN_ON_FPU(),
  followed by another bunch of commits that represent a finegrained
  split-up of the fixes from Eric Biggers to handle weird xstate bits
  properly.

  I did this finegrained split-up because some of these fixes also
  impact the ABI for weird xstate handling, for which we'd like to have
  good bisection results, should they cause any problems. (We also had
  one regression with the more monolithic fixes, so splitting it all up
  sounded prudent for robustness reasons as well.)

  About the whole series: the commits up to 03eaec81 have been in
  -next for months - but I've recently rebased them to remove a state
  machine clean-up commit that was objected to, and to make it more
  bisectable - so technically it's a new, rebased tree.

  Robustness history: this series had some regressions along the way,
  and all reported regressions have been fixed. All but one of the
  regressions manifested itself as easy to report warnings. The previous
  version of this latest series was also in linux-next, with one
  (warning-only) regression reported which is fixed in the latest
  version.

  Barring last minute brown paper bag bugs (and the commits are now
  older by a day which I'd hope helps paperbag reduction), I'm
  reasonably confident about its general robustness.

  Famous last words ..."

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  x86/fpu: Use using_compacted_format() instead of open coded X86_FEATURE_XSAVES
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_user_to_xstate()
  x86/fpu: Eliminate the 'xfeatures' local variable in copy_user_to_xstate()
  x86/fpu: Copy the full header in copy_user_to_xstate()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_kernel_to_xstate()
  x86/fpu: Eliminate the 'xfeatures' local variable in copy_kernel_to_xstate()
  x86/fpu: Copy the full state_header in copy_kernel_to_xstate()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in __fpu__restore_sig()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in xstateregs_set()
  x86/fpu: Introduce validate_xstate_header()
  x86/fpu: Rename fpu__activate_fpstate_read/write() to fpu__prepare_[read|write]()
  x86/fpu: Rename fpu__activate_curr() to fpu__initialize()
  x86/fpu: Simplify and speed up fpu__copy()
  x86/fpu: Fix stale comments about lazy FPU logic
  x86/fpu: Rename fpu::fpstate_active to fpu::initialized
  x86/fpu: Remove fpu__current_fpstate_write_begin/end()
  x86/fpu: Fix fpu__activate_fpstate_read() and update comments
  x86/fpu: Reinitialize FPU registers if restoring FPU state fails
  x86/fpu: Don't let userspace set bogus xcomp_bv
  x86/fpu: Turn WARN_ON() in context switch into WARN_ON_FPU()
  ...

Failure to tune PCIe capabilities should not fail driver load. This can
cause the driver load to fail on systems with any of the following:
1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge.
2. HFI's parent is not PCI Express capable.
In these situations, failure to tune PCIe capabilities should be logged
in the system message logs but not cause the driver load to fail.

This patch also ensures pcie capability word DevCtl is written only
after a successful read and the capability tuning process continues
even if read/write of the pcie capability word DevCtl fails.

Fixes: c53df62c ("IB/hfi1: Check return values from PCI config API calls")
Fixes: bf70a775 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

During base context setup, if setup_base_ctxt() fails, the context is
deallocated. This is incorrect because the context is referenced on
return, to notify any waiting subcontext.  If there are no subcontexts
the pointer will be invalid.

Reorganize the error path so that deallocate_ctxt() is called after all
the possible subcontexts have been notified.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

commit 9a9b8112 will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.

IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
	if (priv->broadcast) {
		rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
		list_add_tail(&priv->broadcast->list, &remove_list);
		priv->broadcast = NULL;
	}
...

then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
	broadcast = ipoib_mcast_alloc(dev, 0);
...
	memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
	       sizeof (union ib_gid));
	priv->broadcast = broadcast;
...

Fixes: 9a9b8112 ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The general interrupt handler returns IRQ_HANDLED whether an IRQ
was handled or not.
Determine if an IRQ was handled and return the correct value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Relying on a trailing magic value is incorrect. There are instances where
this is not present as trailing magic value has a specific purpose which is
not partition validation. Instead use the header magic value which is
present in all variants of the platform configuration and is intended for
validation. This is also used in other locations in the driver.

Fixes: bc5214ee (IB/hfi1: Handle missing magic values in config file)
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

QSFP reset enables AOC transmitters by default. They should be off
before moving to high power mode to complete the setup. There is no
need to reset the QSFP during LNI failure as it was reset at link down.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Offline.quietDuration was added in the 8051 firmware, and the driver
only turns off the AOC transmitters when offline.quiet is reached.
However, the AOC transmitters need to be turned off at the new state.
Therefore, turn off the AOC transmitters at any offline substates
including offline.quiet and offline.quietDuration, then recheck we
reached offline.quiet to support backwards compatibility.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The definition of map_sg was split during a recent addition to iommu_ops.
Put it back together.

Fixes: add02cfd ("iommu: Introduce Interface for IOMMU TLB Flushing")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>