- 18 Aug, 2017 28 commits
-
-
AbdAllah-MEZITI authored
The same structure is used in both side, so we dont need to cast. This will fix the following sparse warnings: drivers/staging/wlan-ng/prism2sta.c:1139:13: warning: cast to restricted __le16 drivers/staging/wlan-ng/prism2sta.c:1150:24: warning: cast to restricted __le16 drivers/staging/wlan-ng/prism2sta.c:1157:37: warning: cast to restricted __le16 drivers/staging/wlan-ng/prism2sta.c:1158:37: warning: cast to restricted __le16 drivers/staging/wlan-ng/prism2sta.c:1159:40: warning: cast to restricted __le16 drivers/staging/wlan-ng/prism2sta.c:1450:31: warning: cast to restricted __le16 Signed-off-by:
AbdAllah MEZITI <abdallah.meziti.pro@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lynn Lei authored
Fixed a potential memory leak inside skb_ether_to_p80211() When the wep_encrypt() fails the code return 2 directly Which causes the p80211_wep->data dangling Add a kfree statement to reclaim that memory allocated Signed-off-by:
Lynn Lei <lynnl.yet@gmail.com> Signed-off-by:
-
John Smith authored
ethernet-rx.c: fix WARNING: line over 80 characters The code was restructured a bit, a helper function was added to cvm_oct_poll. Signed-off-by:
John Smith <catalinnow@gmail.com> Signed-off-by:
-
Teo Dacquet authored
Fix checkpatch issues: ERROR: that open brace { should be on the previous line. WARNING: braces {} are not necessary for single statement blocks. Signed-off-by:Teo Dacquet <teo.dacquet@gmail.com> Signed-off-by:
-
Tom Gardi authored
WARNING: line over 80 characters WARNING: static const char * array should probably be static const char * const CHECK: Unnecessary parentheses around hal_data->odmpriv Signed-off-by:
Tom Gardi <gardi@gmx.at> Signed-off-by:
-
Christoffer Kjoelbaek authored
According to the coding-style documentation, spaces are required around most binary and ternary operators. Spaces were added to fix mulitple coding-style errors. Signed-off-by:
Christoffer Kjoelbaek <christoffer@kjoelbaek.dk> Signed-off-by:
-
Julia Lawall authored
These vb2_ops structures are only stored in the ops field of a vb2_queue structure, which is declared as const. Thus the vb2_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by:Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Arvind Yadav authored
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 9a5a6911 as it causes unneeded build warnings :( Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: JB Van Puyvelde <jbvanpuyvelde@gmail.com> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by:
-
Badhri Jagan Sridharan authored
At present, TCPM does not take into account the actual resistor value presented in the CC line and therefore reports TYPEC_PWR_MODE_USB irrespective of the power_op_mode it is in. This patch makes TCPM consider the actual value of Rp. Signed-off-by:
Badhri Jagan Sridharan <Badhri@google.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Badhri Jagan Sridharan authored
[ 130.893355] state change SNK_DEBOUNCED -> SRC_TRY [ 130.893363] cc:=3 [ 130.893490] pending state change SRC_TRY -> SNK_TRYWAIT @ 100 ms [ 130.895602] CC1: 3 -> 0, CC2: 0 -> 0 [state SRC_TRY, polarity 0, disconnected] [ 130.895613] state change SRC_TRY -> SRC_TRY_DEBOUNCE [ 130.895621] pending state change SRC_TRY_DEBOUNCE -> SRC_ATTACHED @ 20 ms [ 130.916843] state change SRC_TRY_DEBOUNCE -> SRC_ATTACHED [delayed 20 ms] Although the CC state was changing to TYPEC_CC_OPEN, the port entered SRC_TRY_DEBOUNCE from SRC_TRY. The port must enter SRC_TRY_DEBOUNCE only if the CC state is TYPEC_CC_RD. Signed-off-by:
-
Guenter Roeck authored
If the partner is not PD capable, we can not use a power role set request to swap roles. Use the data role set request instead. Also, if a partner is not PD capable, it does not really make sense to send a PD message to trigger a role swap. On top of that, we should really wait for the attempted role change to complete. Otherwise, it may well be that user space requests another role change immediately afterwards which will fail because the port is not yet in ready state. Trigger the role swap from data role change requests and introduce new state PORT_RESET and use it to solve the problem. This new state is mostly identical to ERROR_RECOVERY, only it does not cause a pending role change to fail. Use this new state also when initializing the driver. Rename ERROR_RECOVERY_WAIT_OFF to PORT_RESET_WAIT_OFF to better reflect its new meaning. Signed-off-by:
-
Guenter Roeck authored
The Type-C protocol manager state machine could fail, which might result in role swap requests from user space to hang forever. Add a generous timeout when waiting for role swaps to complete to avoid this situation. Originally-from: Badhri Jagan Sridharan <badhri@google.com> Signed-off-by:
-
Badhri Jagan Sridharan authored
tcpm_default_state wasn't considering the port type when determining the default role. This change makes tcpm_default_state to consider port type as well. tcpm_default_state would return the following based on the port type: TYPEC_PORT_UFP - SNK_UNATTACHED TYPEC_PORT_DFP - SRC_UNATTACHED TYPEC_PORT_DRP - based on the preferred_role setting Signed-off-by:
-
Badhri Jagan Sridharan authored
While exiting ERROR_RECOVERY, choose default state based on the port type instead of current power role. Quoting from specification: 4.5.2.2.2 ErrorRecovery State This state appears in Figure 4-12, Figure 4-13, Figure 4-14, Figure 4-15, Figure 4-16 and Figure 4-17. The ErrorRecovery state is where the port removes the terminations from the CC1 and CC2 pins for tErrorRecovery followed by transitioning to the appropriate Unattached.SNK or Unattached.SRC state based on port type. This is the equivalent of forcing a detach event and looking for a new attach. Signed-off-by:
-
Guenter Roeck authored
Role swap requests fail unless the current role is either SRC_READY or SNK_READY. This works fine for VCONN and data role swaps, where we immediately enter READY state after reporting a successful role swap to user space. However, on power role changes, the role swap is currently reported as successful while power negotiation is still in process. User space does not know this, and may request another role swap immediately after a power role swap is reported to be complete. This second role swap will fail with -EAGAIN. To fix the problem, report role swap completion after power negotiation is complete and the state machine enters SRC_READY or SNK_READY state. This is better anyway since it captures errors due to failed power negotiations. It also simplifies the code since the number of calls needed to report successful role swaps is reduced. Reported-by:
Howard Yen <howard_yen@htc.com> Signed-off-by:
-
Guenter Roeck authored
Constify alternate mode configuration data which won't be touched by the driver. Signed-off-by:
-
Marcin Ciupak authored
The following macro: \#define INVALID_PARAM { \ dev_dbg(&spi->dev, "set: illegal input param"); \ return -EINVAL; \ } affects control flow by having return statement. This is against Linux Kernel Coding Style and should be avoided and therefore this macro is replaced by inline code. Additionally following 3 minor issues: ERROR: code indent should use tabs where possible ERROR: spaces required around that '!=' (ctx:VxV) ERROR: space prohibited before that close parenthesis ')' were fiexed inline. Signed-off-by:Marcin Ciupak <marcin.s.ciupak@gmail.com> Signed-off-by:
-
Quentin Swain authored
sparse reports the following warning "warning: dubious: x & !y". Replaced te logical not with bitwise to resolve the warning Signed-off-by:
Quentin Swain <dudebrobro179@gmail.com> Signed-off-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code that was not doing anything sensible anyway. Signed-off-by:
Peter Rosin <peda@axentia.se> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
On driver cleanup we need to call fb_deferred_io_cleanup() if build with CONFIG_FB_DEFERRED_IO set. Suggested-by:
Michael Thayer <michael.thayer@oracle.com> Signed-off-by:
-
Hans de Goede authored
Patches for the vboxvideo driver should also be Cc-ed to dri-devel, update the TODO file accordingly. Signed-off-by:
-
Cihangir Akturk authored
drm_*_reference() and drm_*_unreference() functions are just compatibility alias for drm_*_get() and drm_*_put() adn should not be used by new code. So convert all users of compatibility functions to use the new APIs. Signed-off-by:
Cihangir Akturk <cakturk@gmail.com> Signed-off-by:
-
Cihangir Akturk authored
vboxvideo code uses various ttm_* functions, so it needs "drivers/gpu/drm/ttm/*" to be built. In order to build these objects select DRM_TTM. This commit fixes "ttm_*" undefined build errors. Signed-off-by:
-
- 16 Aug, 2017 2 commits
-
-
Arvind Yadav authored
dev_pm_ops are not supposed to change at runtime. All functions working with dev_pm_ops provided by <linux/device.h> work with const dev_pm_ops. So mark the non-const structs as const. Signed-off-by:
-
Simon Sandström authored
Fixes 9 checkpatch.pl warnings of type "Prefer kmalloc(sizeof(variable)...) over kmalloc(sizeof(type)...)" in staging/ccree. Signed-off-by:
Simon Sandström <simon@nikanor.nu> Signed-off-by:
-
- 15 Aug, 2017 6 commits
-
-
Marcin Ciupak authored
This patch fixes the following checkpatch.pl error: ERROR: space required before the open brace '{' in rf69.c file as requested by TODO file. Signed-off-by: -
Marcin Ciupak authored
This patch fixes the following checkpatch.pl error: ERROR: else should follow close brace '}' in rf69.c file as requested by TODO file. Signed-off-by:
-
Marcin Ciupak authored
This patch fixes the following checkpatch.pl error: ERROR: that open brace { should be on the previous line in rf69.c file as requested by TODO file. Note: ERROR: else should follow close brace '}' remains valid here and is going to be fixed by the next patch in set. Additionally some style warnings remain valid here and could be fixed by another patch. Signed-off-by: -
Marcin Ciupak authored
This patch is intended to fix coding style issues in order to comply with kernel coding style guide as requested by TODO file. It fixes the following checkpatch.pl error: ERROR: "foo * bar" should be "foo *bar" Note: "WARNING: line over 80 characters" remains valid here and could be fixed by another patch. Signed-off-by:
Marcus Wolf <linux@wolf-entwicklungen.de> Signed-off-by:
-
Arnd Bergmann authored
Putting a 900 byte array on the stack is a clearly too much in the kernel, and sometimes results in warnings like: drivers/staging/pi433/pi433_if.c: In function 'pi433_tx_thread': drivers/staging/pi433/pi433_if.c:645:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] This moves the buffer into the dynamically allocated per-device structure. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Elia Geretto authored
This patch fixes the following four warnings found using sparse: drivers/staging/pi433/pi433_if.c:211:9: warning: mixing different enum types drivers/staging/pi433/pi433_if.c:211:9: int enum optionOnOff versus drivers/staging/pi433/pi433_if.c:211:9: int enum packetFormat drivers/staging/pi433/pi433_if.c:211:9: warning: mixing different enum types drivers/staging/pi433/pi433_if.c:211:9: int enum optionOnOff versus drivers/staging/pi433/pi433_if.c:211:9: int enum packetFormat drivers/staging/pi433/pi433_if.c:268:9: warning: mixing different enum types drivers/staging/pi433/pi433_if.c:268:9: int enum optionOnOff versus drivers/staging/pi433/pi433_if.c:268:9: int enum packetFormat drivers/staging/pi433/pi433_if.c:268:9: warning: mixing different enum types drivers/staging/pi433/pi433_if.c:268:9: int enum optionOnOff versus drivers/staging/pi433/pi433_if.c:268:9: int enum packetFormat This is done calling the rf69_set_packet_format function using the appropriate enum for the packetFormat argument. Signed-off-by:
Elia Geretto <elia.f.geretto@gmail.com> Signed-off-by:
-
- 14 Aug, 2017 3 commits
-
-
Laurentiu Tudor authored
The driver makes use of GENERIC_MSI_IRQ_DOMAIN which requires arch support so, on architectures that don't have it, the kernel will fail to build. Add explicit dependency on architectures that were compile-tested, thus fixing compilation for the ones that don't implement GENERIC_MSI_IRQ_DOMAIN. Fixes: 03274850 ("staging: fsl-mc: allow the driver compile multi-arch") Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by:
-
Cihangir Akturk authored
Use resource_size() function on resource objects instead of explicit computation. This patch fixes the following coccinelle warning: drivers/staging/fsl-mc/bus/dprc-driver.c:620:35-38: ERROR: Missing resource_size with mc_dev -> regions Signed-off-by:
-
Greg Kroah-Hartman authored
We need it here for iio fixes. Signed-off-by:
-
- 13 Aug, 2017 1 commit
-
-
Linus Torvalds authored
-
