- 24 Dec, 2013 13 commits
-
-
Alex Deucher authored
Make sure interrupts are enabled before we enable thermal interrupts. Signed-off-by:Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Make sure interrupts are enabled before we enable thermal interrupts. Signed-off-by: -
Alex Deucher authored
Certain features need to be enabled after ring tests (e.g., powergating, etc.). Add a function pointer to split out late enable features. Signed-off-by: -
Alex Deucher authored
We need to reorder the driver init sequence to better accomodate dpm which needs to be loaded earlier in the init sequence. Move fw init up so that it's available for dpm init. Signed-off-by: -
Alex Deucher authored
I'm not entirely sure this is required and it won't work with the dpm restructing anyway. Signed-off-by: -
Alex Deucher authored
I'm not entirely sure this is required and it won't work with the dpm restructing anyway. Signed-off-by: -
Alex Deucher authored
No need to check rdev->pm.num_power_states; this is a vestige of the old pm code. Signed-off-by: -
Christian König authored
v2: add default_llseek v3: set inode size in the open callback Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christian König authored
Not very fast, but makes it possible to access even the normally inaccessible parts of VRAM from userspace. v2: use MM_INDEX_HI for >2GB mem access, add default_llseek v3: set inode size in the open callback Signed-off-by:
-
Christian König authored
Otherwise we not necessary export the right information. Signed-off-by:
-
Christian König authored
Signed-off-by:
-
Christian König authored
Signed-off-by:
-
Christian König authored
Signed-off-by:
-
- 18 Dec, 2013 27 commits
-
-
Todd Previte authored
- DP_TEST_LINK_PATTERN is ambiguous, rename to DP_TEST_LINK_VIDEO_PATTERN to clarify - Added DP_TEST_LINK_FAUX_PATTERN to support automated testing of Fast AUX Signed-off-by:
Todd Previte <tprevite@gmail.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dan Carpenter authored
drivers/gpu/drm/r128/r128_state.c:1014:10-17: WARNING opportunity for memdup_user /c/kernel-tests/src/cocci/drivers/gpu/drm/r128/r128_state.c:1029:9-16: WARNING opportunity for memdup_user /c/kernel-tests/src/cocci/drivers/gpu/drm/r128/r128_state.c:904:10-17: WARNING opportunity for memdup_user /c/kernel-tests/src/cocci/drivers/gpu/drm/r128/r128_state.c:914:9-16: WARNING opportunity for memdup_user Use memdup_user rather than duplicating its implementation This is a little bit restricted to reduce false positives Generated by: coccinelle/api/memdup_user.cocci CC: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
This is just used for a debugfs file, and we can easily reconstruct this number by just walking the list twice. Which isn't really bad for a debugfs file anyway. So let's rip this out. There's the other issue that the dev->vmalist itself is a bit useless, since that can be reconstructed with all the memory mapping information from proc. But remove that is a different topic entirely. Signed-off-by:
-
Daniel Vetter authored
It's racy, and it's only used in debugfs. There are simpler ways to know whether something is going on (like looking at dmesg with full debugging enabled). And they're all much more useful. So let's just rip this out. Signed-off-by:
-
Daniel Vetter authored
Now dev->ioctl_count tries to prevent the device from disappearing if it's still in use. And if we'd actually need this code it would be hopelessly racy and broken. But luckily the vfs already takes care of this. So we can just rip it out. Signed-off-by:
-
Daniel Vetter authored
This has the nice advantage that we'll get rid of a DRM_WAIT_ON user for free. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Checking directly for the right capability is simpler. Also this rids us of a few places that use DRM_CURRENTPID. Signed-off-by:
-
Daniel Vetter authored
The real linux interfaces are soooo much easier on the eyes ... Signed-off-by:
-
Daniel Vetter authored
Less yelling ftw! Signed-off-by:
-
Daniel Vetter authored
Less yelling ftw! Signed-off-by:
-
Daniel Vetter authored
I've killed them a long time ago in drm/i915, let's get rid of this remnant of shared drm core days for good. Signed-off-by:
-
Daniel Vetter authored
We don't have any userspace interfaces that use HZ as a time unit, so having our own DRM define is useless. Remove this remnant from the shared drm core days. Signed-off-by:
-
Daniel Vetter authored
The <linux/agp_backend.h> header provides dummy functions and fallbacks, so no need for screaming macros. Signed-off-by:
-
Daniel Vetter authored
David Herrmann dutifully moved this locking along when moving the agp_init call out of the generic drm_dev_register into the pci specific load helpers. But afaict there's no need and the reason for that locking has been purely a historical accident - we need the lock around the driver dev node registration to paper over the midlayer init races, and the agp init simply ended up in there. The real fix for all this is of course to delay the dev (and sysfs/debugfs) interface registration until everything is fully set up. Until then stop the cargo-cult locking from spreading and remove the locking. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Dave Airlie authored
Signed-off-by: -
Daniel Vetter authored
Call drm_pci_agp_destroy directly, there's no point in the indirection. Long term we want to shuffle this into each driver's unload logic, but that needs cleared-up drm lifetime rules first. v2: Add a dummy function for !CONFIG_PCI, spotted my David Herrmann. v3: Fixup for the coding style police. Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Wrapping a kfree is pointless. v2: Add a comment to the kerneldoc for drm_agp_init to explain where the kfree happens as requested by David. Note that for modeset drivers agp cleanup is fairly complicated anyway: The drm_agp_clear is a noop and drivers must call drm_agp_release on their own. Which they all seem to do properly. Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
-
Daniel Vetter authored
The PCI bus helper is the only user of it. Call it directly before device-registration to get rid of the callback. Note that all drm_agp_*() calls are locked with the drm-global-mutex so we need to explicitly lock it during initialization. It's not really clear why it's needed, but lets be safe. v2: Rebase on top of the agp_init interface change. v3: Remove the rebase-fail where I've accidentally killed the ->irq_by_busid callback a bit too early. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> (v1) Signed-off-by:
-
Daniel Vetter authored
Most place actually want to just check for dev->agp (most do, but a few don't so this fixes a few potential NULL derefs). The only exception is the agp init code which should check for the AGP driver feature flag. Signed-off-by:
-
Daniel Vetter authored
Thanks to the removal of REQUIRE_AGP we can use a void return value and shed a bit of complexity. Reviewed-by:
-
Daniel Vetter authored
Only the two intel drivers need this and they can easily check for working agp support in their driver ->load callbacks. This is the only reason why agp initialization could fail, so allows us to rip out a bit of error handling code in the next patch. Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Also remove the dev_err call to avoid redundant error message. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> [Remove the unneeded mem == NULL check] Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Thierry Reding authored
The current values seem to be defined in a format that's specific to the i915, gma500 and radeon drivers. To make this more generally useful, use the values as defined in the specification. While at it, prefix the constants with DP_ for improved namespacing. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Daniel Vetter authored
Gone with the new gem vma offset manager from David. We can also ditch the uapi header definition from the enum since userspace never used this. It ended up in there purely for historical reasons (for reusing the old drm mmap code essentially), not because userspace ever needed it. Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
-
Daniel Vetter authored
There's really no need for the drm core to keep a list of all devices of a given driver - the linux device model keeps perfect track of this already for us. The exception is old legacy ums drivers using pci shadow attaching. So rename the lists to make the use case clearer and rip out everything else. v2: Rebase on top of David Herrmann's drm device register changes. Also drop the bogus dev_set_drvdata for platform drivers that somehow crept into the original version - drivers really should be in full control of that field. v3: Initialize driver->legacy_dev_list outside of the loop, spotted by David Herrmann. v4: Rebase on top of the newly created host1x drm_bus for tegra. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Daniel Vetter authored
This very much looks like a remnant of the old legady ums shadow attach days. Now with the last users gone we can rip it out since we won't ever support an ums drm driver again. Signed-off-by:
-
Daniel Vetter authored
The drvdata pointer is already assigned to something useful. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
