- 27 Feb, 2020 18 commits
-
-
Bingbu Cao authored
A specific tool which can be used to generate imgu intermedia resolutions now is public on github, this patch adds this information into ipu3.rst. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Shawn Tu authored
- Add V4L2 controls: horizontal/vertical flip, keep SGRBG10 Bayer order output (via change v/hflip) - Fix Bayer order output in 1296x972 binning registers Signed-off-by:
Shawn Tu <shawnx.tu@intel.com> Signed-off-by:
-
Dikshita Agarwal authored
Add new qcom,sc7180-venus DT binding schema. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
This add DT compatible string and resource structure for sc7180. Signed-off-by:
-
Stanimir Varbanov authored
After transitioning to YAML DT schema we don't need this old-style document. Acked-by:
-
Stanimir Varbanov authored
In order to use dynamic video codec assignment add a new sdm845-v2 DT compatible and new venus_resource structure to cover the binding where all pmdomains and clocks are under the venus_core control. Signed-off-by:
-
Stanimir Varbanov authored
Add new qcom,sdm845-venus-v2 DT binding schema. Reviewed-by:
-
Stanimir Varbanov authored
Convert qcom,sdm845-venus Venus binding to DT schema. Reviewed-by:
-
Stanimir Varbanov authored
Convert qcom,msm8996-venus Venus binding to DT schema. Reviewed-by:
-
Stanimir Varbanov authored
Convert qcom,msm8916-venus Venus binding to DT schema Reviewed-by:
-
Aniket Masule authored
Handle 10bit video streams in the decoder by using dithering, i.e the decoder output buffers will be in 8bit format. The runtime handling is implemented by sending v4l2 event to userspace application, then the application should stop the streaming on capture queue and initiate format negotiation, and start streaming again. Signed-off-by:
Aniket Masule <amasule@codeaurora.org> Co-developed-by:
-
Aniket Masule authored
Presently the core (vcodec pipelines) assignment is static. Here we introduce dynamic load balancing across the cores depending on the current session load. The load on earch core is calculated and core with minimum load is assigned to given instance. This will be applicable on Venus v4 with more than one vcodec cores. Signed-off-by:
-
Stanimir Varbanov authored
Redesign core (vcodec) clock control to give the venus core more freedom to control them in order to make possible to use core selection feature on Venus IP v4. Move all clock and pmdomain functions in separate file and abstract power control with common operations per Venus IP version. Signed-off-by:
-
Stanimir Varbanov authored
Instead of iterate over previously queued buffers in clock scaling code do cache the payload in instance context structure for later use when calculating new clock rate. This will avoid to use spin locks during buffer list iteration in clock_scaling. This fixes following kernel Oops: Unable to handle kernel paging request at virtual address deacfffffffffd6c Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [deacfffffffffd6c] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 7 PID: 5763 Comm: V4L2DecoderThre Tainted: G S W 5.4.11 #8 pstate: 20400009 (nzCv daif +PAN -UAO) pc : load_scale_v4+0x4c/0x2bc [venus_core] lr : session_process_buf+0x18c/0x1c0 [venus_core] sp : ffffffc01376b8d0 x29: ffffffc01376b8d0 x28: ffffff80cf1b0220 x27: ffffffc01376bba0 x26: ffffffd8f562b2d8 x25: ffffff80cf1b0220 x24: 0000000000000005 x23: ffffffd8f5620d98 x22: ffffff80ca01c800 x21: ffffff80cf1b0000 x20: ffffff8149490080 x19: ffffff8174b2c010 x18: 0000000000000000 x17: 0000000000000000 x16: ffffffd96ee3a0dc x15: 0000000000000026 x14: 0000000000000026 x13: 00000000000055ac x12: 0000000000000001 x11: deacfffffffffd6c x10: dead000000000100 x9 : ffffff80ca01cf28 x8 : 0000000000000026 x7 : 0000000000000000 x6 : ffffff80cdd899c0 x5 : ffffff80cdd899c0 x4 : 0000000000000008 x3 : ffffff80ca01cf28 x2 : ffffff80ca01cf28 x1 : ffffff80d47ffc00 x0 : ffffff80cf1b0000 Call trace: load_scale_v4+0x4c/0x2bc [venus_core] session_process_buf+0x18c/0x1c0 [venus_core] venus_helper_vb2_buf_queue+0x7c/0xf0 [venus_core] __enqueue_in_driver+0xe4/0xfc [videobuf2_common] vb2_core_qbuf+0x15c/0x338 [videobuf2_common] vb2_qbuf+0x78/0xb8 [videobuf2_v4l2] v4l2_m2m_qbuf+0x80/0xf8 [v4l2_mem2mem] v4l2_m2m_ioctl_qbuf+0x2c/0x38 [v4l2_mem2mem] v4l_qbuf+0x48/0x58 __video_do_ioctl+0x2b0/0x39c video_usercopy+0x394/0x710 video_ioctl2+0x38/0x48 v4l2_ioctl+0x6c/0x80 do_video_ioctl+0xb00/0x2874 v4l2_compat_ioctl32+0x5c/0xcc __se_compat_sys_ioctl+0x100/0x2074 __arm64_compat_sys_ioctl+0x20/0x2c el0_svc_common+0xa4/0x154 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x10 Code: eb0a013f 54000200 aa1f03e8 d10e514b (b940016c) ---[ end trace e11304b46552e0b9 ]--- Fixes: c0e284cc ("media: venus: Update clock scaling") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by:
-
Stanimir Varbanov authored
Those two properties are not implemented for Venus v4 (sdm845), thus don't set them to firmware. Signed-off-by:
-
Andy Shevchenko authored
Replace explicit use of members of struct resource by %pR to print the resource. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Stephan Gerhold authored
Some older MSM8916 Venus firmware versions also seem to indicate support for encoding HEVC, even though they really can't. This will lead to errors later because hfi_session_init() fails in this case. HEVC is already ignored for "dec_codecs", so add the same for "enc_codecs" to make these old firmware versions work correctly. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Stanimir Varbanov authored
Adds a path to devicetree dt-binding files. Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
- 24 Feb, 2020 22 commits
-
-
Dan Carpenter authored
There was supposed to be a "ret = " assignment here, otherwise the error handling on the next line won't work. Fixes: 64b5a49d ("[media] media: imx: Add Capture Device Interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Avoid adding an extra columns when describing unions in the documentation. That makes it much harder to read. See e.g. VIDIOC_QUERY_EXT_CTRLS. Instead start off a union with 'union {' and end it with an extra row containing '}'. This leaves a lot more space for the description of the fields. This formatting technique was used in a few places already, but this patches fixes all remaining occurrences of 'union' in the media uAPI. Signed-off-by:Nicolas Dufresne <nicolas@ndufresne.ca> Signed-off-by:
-
Dafna Hirschfeld authored
For subdevices drivers, the drivers themself are responsible for serializing their operations. This patch adds serialization to the resizer subdevice. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Acked-by:
-
Dafna Hirschfeld authored
For subdevices drivers, the drivers themself are responsible for serializing their operations. This patch adds serialization to the isp subdevice. Signed-off-by:
-
Dafna Hirschfeld authored
In rkisp1_isp_s_stream it is better to return error in case the bus type is not dphy before initializing the registers. Signed-off-by:
-
Dafna Hirschfeld authored
There are functions that return int but actually return always 0. Change them to return void and then there is no need to check for error return value. Signed-off-by:
-
Helen Koike authored
When setting source pad, check if the given mbus code is indeed valid for source pad, if not, then set the default code. Same for sink pad. Fixes: d65dd852 ("media: staging: rkisp1: add Rockchip ISP1 base driver") Reported-by:
Wojciech Zabolotny <wzab01@gmail.com> Signed-off-by:
-
Helen Koike authored
If bayer format is set in mainpath, then crop is not supported. The core was just resetting crop but wasn't returning the values back to user space. Return values taken in consideration by the driver to userpace. Signed-off-by:
-
Helen Koike authored
Fix issue when, in case of raw bayer format in mainpath, VIDIOC_SUBDEV_S_FMT ioctl didn't have any effect, is wasn't updating the format of the pad. There is no crop for mainpath bayer raw data. Remove leftover check in set_format, since check is already done in crop rkisp1_rsz_set_sink_crop() function. Fixes: d65dd852 ("media: staging: rkisp1: add Rockchip ISP1 base driver") Signed-off-by:
-
Helen Koike authored
Stats entity is using a slightly different bus_info string "platform: rkisp1" (with a space) instead of "platform:rkisp1" used by the rest of rkisp1 code. This causes errors when using v4l2-util tools that uses the bus_info string to identify the device. Fixes: 9a28dbd6 ("media: staging: rkisp1: add capture device for statistics") Signed-off-by:
-
Helen Koike authored
Media device is using a slightly different bus_info string "platform: rkisp1" (with a space) instead of "platform:rkisp1" used by the rest of rkisp1 code. This causes errors when using v4l2-util tools that uses the bus_info string to identify the device. Fixes: d65dd852 ("media: staging: rkisp1: add Rockchip ISP1 base driver") Signed-off-by:
-
Dafna Hirschfeld authored
Improve the documentation in the beginning of the file rkisp1-isp1.c Signed-off-by:
-
Dafna Hirschfeld authored
media_entity_get_fwnode_pad returns negative value on error and the pad numeber on success. Therefore change the error test from 'if (ret)' to 'if (ret < 0)' . Fixes: d65dd852 ("media: staging: rkisp1: add Rockchip ISP1 base driver") Signed-off-by:
-
Dafna Hirschfeld authored
The function rkisp1_create_links calls media_entity_get_fwnode_pad and media_create_pad_link in the mc api. Those calls don't require locking the graph_mutex so remove the locking. Signed-off-by:
-
Hans Verkuil authored
Use WARN_ON instead of BUG_ON. Add two new WARN_ONs to verify that the source pad is really a source and that the sink pad is really a sink. Signed-off-by:
-
Justin Swartz authored
Indicate that the rk3228 rga is compatible with that of the rk3288. But if any rk3228-specific quirks are identified in future that require handling logic that differs from what is provided for the rk3288, then allow for the compatibility string "rockchip,rk3228-rga" to be matched instead of "rockchip,rk3288-rga". Signed-off-by:
Justin Swartz <justin.swartz@risingedge.co.za> Acked-by:
-
Ezequiel Garcia authored
The post-processing feature is meant to be used by decoding only. Prevent encoding jobs from enabling it. Fixes: 8c2d66b0 ("media: hantro: Support color conversion via post-processing") Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Philipp Zabel authored
Add space for MVs and MC sync data to the capture buffers depending on whether the post processor will be enabled for the new capture format passed to TRY_FMT, not the currently set capture format. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Andrzej Pietrasiewicz authored
Luma and chroma qtables need to be written into two 16-register blocks, each table consisting of 64 bytes total. The blocks are contiguous and start at offset 0 for luma and at offset 0x40 for chroma. The seemingly innocent optimization of writing the two blocks using one loop causes side effects which result in improper values of quantization tables being used by the hardware during encoding. Visually this results in macroblocking artifacts around contrasting edges in encoded images. The artifacts look like horizontally flipped shadows of the said edges. Changing the write operations to non-relaxed variant doesn't help. This patch removes this premature optimization and after this change the macroblocking artifacts around contrasting edges are gone. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Tested-by:
-
Andrzej Pietrasiewicz authored
The quantization tables as defined in the file (luma_q_table, chroma_q_table) are in fact in linear order. The JPEG file header, which is not generated by the hardware, but must be programatically created with the CPU, expects the table in zigzag order. On the other hand, the hardware doesn't expect neither linear, nor zigzag order. Instead it expects the quantization tables in vertical groups of four quantization parameters, and the groups are organized in blocks of two vertically adjacent groups. On top of that the blocks must be provided to the hardware in this order: leftmost top block, leftmost bottom block, second leftmost top block, second leftmost bottom block and so on. So, if this is the quantization table in linear order: 0x10, 0x0b, 0x0a, 0x10, 0x18, 0x28, 0x33, 0x3d, 0x0c, 0x0c, 0x0e, 0x13, 0x1a, 0x3a, 0x3c, 0x37, 0x0e, 0x0d, 0x10, 0x18, 0x28, 0x39, 0x45, 0x38, 0x0e, 0x11, 0x16, 0x1d, 0x33, 0x57, 0x50, 0x3e, 0x12, 0x16, 0x25, 0x38, 0x44, 0x6d, 0x67, 0x4d, 0x18, 0x23, 0x37, 0x40, 0x51, 0x68, 0x71, 0x5c, 0x31, 0x40, 0x4e, 0x57, 0x67, 0x79, 0x78, 0x65, 0x48, 0x5c, 0x5f, 0x62, 0x70, 0x64, 0x67, 0x63 then the hardware expects this in its consecutive registers: 0x100c0e0e, 0x0b0c0d11, 0x12183148, 0x1623405c, 0x0a0e1016, 0x1013181d, 0x25374e5f, 0x38405762, and so on. Consequently, the same area of memory cannot be used both for dumping it into the JPEG file header and writing its contents to the hardware registers. Instead, a separate pair of arrays is added for properly reordered quantization tables, to be read with get_unaligned_be32() and linearly written to the registers. The "ctx" parameter is not needed any more for hantro_jpeg_get_qtable(). Signed-off-by:
-
Andrzej Pietrasiewicz authored
The table is actually different in the document than in this file, so align this file with the document. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Since (luma/chroma)_qtable is an array of unsigned char, indexing it returns consecutive byte locations, but we are supposed to read the arrays in four-byte words. Consequently, we should be pointing get_unaligned_be32() at consecutive word locations instead. Signed-off-by:
-
