Skip to content

L
linux
Switch branch/tag
  1. 17 Sep, 2010 1 commit
  3. 16 Sep, 2010 10 commits
  5. 15 Sep, 2010 20 commits
  7. 14 Sep, 2010 9 commits
    • Jeff Layton's avatar
      cifs: fix potential double put of TCP session reference · 460cf341
      Jeff Layton authored 
      cifs_get_smb_ses must be called on a server pointer on which it holds an
active reference. It first does a search for an existing SMB session. If
it finds one, it'll put the server reference and then try to ensure that
the negprot is done, etc.

If it encounters an error at that point then it'll return an error.
There's a potential problem here though. When cifs_get_smb_ses returns
an error, the caller will also put the TCP server reference leading to a
double-put.

Fix this by having cifs_get_smb_ses only put the server reference if
it found an existing session that it could use and isn't returning an
error.

Cc: stable@kernel.org
Reviewed-by: default avatarSuresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: default avatarJeff Layton <jlayton@redhat.com>
Signed-off-by: default avatarSteve French <sfrench@us.ibm.com>
      460cf341
    • Roland McGrath's avatar
      x86-64, compat: Retruncate rax after ia32 syscall entry tracing · eefdca04
      Roland McGrath authored 
      In commit d4d67150, we reopened an old hole for a 64-bit ptracer touching a
32-bit tracee in system call entry.  A %rax value set via ptrace at the
entry tracing stop gets used whole as a 32-bit syscall number, while we
only check the low 32 bits for validity.

Fix it by truncating %rax back to 32 bits after syscall_trace_enter,
in addition to testing the full 64 bits as has already been added.
Reported-by: default avatarBen Hawkes <hawkes@sota.gen.nz>
Signed-off-by: default avatarRoland McGrath <roland@redhat.com>
Signed-off-by: default avatarH. Peter Anvin <hpa@linux.intel.com>
      eefdca04
    • H. Peter Anvin's avatar
      x86-64, compat: Test %rax for the syscall number, not %eax · 36d001c7
      H. Peter Anvin authored 
      On 64 bits, we always, by necessity, jump through the system call
table via %rax.  For 32-bit system calls, in theory the system call
number is stored in %eax, and the code was testing %eax for a valid
system call number.  At one point we loaded the stored value back from
the stack to enforce zero-extension, but that was removed in checkin
d4d67150.  An actual 32-bit process
will not be able to introduce a non-zero-extended number, but it can
happen via ptrace.

Instead of re-introducing the zero-extension, test what we are
actually going to use, i.e. %rax.  This only adds a handful of REX
prefixes to the code.
Reported-by: default avatarBen Hawkes <hawkes@sota.gen.nz>
Signed-off-by: default avatarH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@kernel.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
      36d001c7
    • H. Peter Anvin's avatar
      compat: Make compat_alloc_user_space() incorporate the access_ok() · c41d68a5
      H. Peter Anvin authored 
      compat_alloc_user_space() expects the caller to independently call
access_ok() to verify the returned area.  A missing call could
introduce problems on some architectures.

This patch incorporates the access_ok() check into
compat_alloc_user_space() and also adds a sanity check on the length.
The existing compat_alloc_user_space() implementations are renamed
arch_compat_alloc_user_space() and are used as part of the
implementation of the new global function.

This patch assumes NULL will cause __get_user()/__put_user() to either
fail or access userspace on all architectures.  This should be
followed by checking the return value of compat_access_user_space()
for NULL in the callers, at which time the access_ok() in the callers
can also be removed.
Reported-by: default avatarBen Hawkes <hawkes@sota.gen.nz>
Signed-off-by: default avatarH. Peter Anvin <hpa@linux.intel.com>
Acked-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: default avatarChris Metcalf <cmetcalf@tilera.com>
Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
Acked-by: default avatarIngo Molnar <mingo@elte.hu>
Acked-by: default avatarThomas Gleixner <tglx@linutronix.de>
Acked-by: default avatarTony Luck <tony.luck@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <jejb@parisc-linux.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <stable@kernel.org>
      c41d68a5
    • Thomas Gleixner's avatar
      x86: hpet: Work around hardware stupidity · 54ff7e59
      Thomas Gleixner authored 
      This more or less reverts commits 08be9796 (x86: Force HPET
readback_cmp for all ATI chipsets) and 30a564be (x86, hpet: Restrict
read back to affected ATI chipsets) to the status of commit 8da854cb
(x86, hpet: Erratum workaround for read after write of HPET
comparator).

The delta to commit 8da854cb is mostly comments and the change from
WARN_ONCE to printk_once as we know the call path of this function
already.

This needs really in depth explanation:

First of all the HPET design is a complete failure. Having a counter
compare register which generates an interrupt on matching values
forces the software to do at least one superfluous readback of the
counter register.

While it is nice in theory to program "absolute" time events it is
practically useless because the timer runs at some absurd frequency
which can never be matched to real world units. So we are forced to
calculate a relative delta and this forces a readout of the actual
counter value, adding the delta and programming the compare
register. When the delta is small enough we run into the danger that
we program a compare value which is already in the past. Due to the
compare for equal nature of HPET we need to read back the counter
value after writing the compare rehgister (btw. this is necessary for
absolute timeouts as well) to make sure that we did not miss the timer
event. We try to work around that by setting the minimum delta to a
value which is larger than the theoretical time which elapses between
the counter readout and the compare register write, but that's only
true in theory. A NMI or SMI which hits between the readout and the
write can easily push us beyond that limit. This would result in
waiting for the next HPET timer interrupt until the 32bit wraparound
of the counter happens which takes about 306 seconds.

So we designed the next event function to look like:

   match = read_cnt() + delta;
   write_compare_ref(match);
   return read_cnt() < match ? 0 : -ETIME;

At some point we got into trouble with certain ATI chipsets. Even the
above "safe" procedure failed. The reason was that the write to the
compare register was delayed probably for performance reasons. The
theory was that they wanted to avoid the synchronization of the write
with the HPET clock, which is understandable. So the write does not
hit the compare register directly instead it goes to some intermediate
register which is copied to the real compare register in sync with the
HPET clock. That opens another window for hitting the dreaded "wait
for a wraparound" problem.

To work around that "optimization" we added a read back of the compare
register which either enforced the update of the just written value or
just delayed the readout of the counter enough to avoid the issue. We
unfortunately never got any affirmative info from ATI/AMD about this.

One thing is sure, that we nuked the performance "optimization" that
way completely and I'm pretty sure that the result is worse than
before some HW folks came up with those.

Just for paranoia reasons I added a check whether the read back
compare register value was the same as the value we wrote right
before. That paranoia check triggered a couple of years after it was
added on an Intel ICH9 chipset. Venki added a workaround (commit
8da854cb) which was reading the compare register twice when the first
check failed. We considered this to be a penalty in general and
restricted the readback (thus the wasted CPU cycles) to the known to
be affected ATI chipsets.

This turned out to be a utterly wrong decision. 2.6.35 testers
experienced massive problems and finally one of them bisected it down
to commit 30a564be which spured some further investigation.

Finally we got confirmation that the write to the compare register can
be delayed by up to two HPET clock cycles which explains the problems
nicely. All we can do about this is to go back to Venki's initial
workaround in a slightly modified version.

Just for the record I need to say, that all of this could have been
avoided if hardware designers and of course the HPET committee would
have thought about the consequences for a split second. It's out of my
comprehension why designing a working timer is so hard. There are two
ways to achieve it:

 1) Use a counter wrap around aware compare_reg <= counter_reg
    implementation instead of the easy compare_reg == counter_reg

    Downsides:

	- It needs more silicon.

	- It needs a readout of the counter to apply a relative
	  timeout. This is necessary as the counter does not run in
	  any useful (and adjustable) frequency and there is no
	  guarantee that the counter which is used for timer events is
	  the same which is used for reading the actual time (and
	  therefor for calculating the delta)

    Upsides:

	- None

  2) Use a simple down counter for relative timer events

    Downsides:

	- Absolute timeouts are not possible, which is not a problem
	  at all in the context of an OS and the expected
	  max. latencies/jitter (also see Downsides of #1)

   Upsides:

	- It needs less or equal silicon.

	- It works ALWAYS

	- It is way faster than a compare register based solution (One
	  write versus one write plus at least one and up to four
	  reads)

I would not be so grumpy about all of this, if I would not have been
ignored for many years when pointing out these flaws to various
hardware folks. I really hate timers (at least those which seem to be
designed by janitors).

Though finally we got a reasonable explanation plus a solution and I
want to thank all the folks involved in chasing it down and providing
valuable input to this.
Bisected-by: default avatarNix <nix@esperi.org.uk>
Reported-by: default avatarArtur Skawina <art.08.09@gmail.com>
Reported-by: default avatarDamien Wyart <damien.wyart@free.fr>
Reported-by: default avatarJohn Drescher <drescherjm@gmail.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: stable@kernel.org
Acked-by: default avatarSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      54ff7e59
    • Alex Deucher's avatar
      drm/radeon/kms: force legacy pll algo for RV620 LVDS · f90087ee
      Alex Deucher authored 
      There has been periodic evidence that LVDS, on at least some
panels, prefers the dividers selected by the legacy pll algo.
This patch forces the use of the legacy pll algo on RV620
LVDS panels.  The old behavior (new pll algo) can be selected
by setting the new_pll module parameter to 1.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=30029Signed-off-by: default avatarAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      f90087ee
    • Dave Airlie's avatar
      drm: fix race between driver loading and userspace open. · b64c115e
      Dave Airlie authored 
      Not 100% sure this is due to BKL removal, its most likely a combination
of that + userspace timing changes in udev/plymouth. The drm adds the sysfs
device before the driver has completed internal loading, this causes udev
to make the node and plymouth to open it before we've completed loading.

The proper solution is to delay the sysfs manipulation until later in loading
however this causes knock on issues with sysfs connector nodes, so we can use
the global mutex to serialise loading and userspace opens.

Reported-by: Toni Spets (hifi on #radeon)
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      b64c115e
    • Chris Wilson's avatar
      drm: Use a nondestructive mode for output detect when polling (v2) · 930a9e28
      Chris Wilson authored 
      v2: Julien Cristau pointed out that @nondestructive results in
double-negatives and confusion when trying to interpret the parameter,
so use @force instead. Much easier to type as well. ;-)

And fix the miscompilation of vmgfx reported by Sedat Dilek.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      930a9e28
    • Guillaume Chazarain's avatar
      HID: fix hiddev's use of usb_find_interface · 8fe294ca
      Guillaume Chazarain authored 
      My macbook infrared remote control was broken by commit
bd25f4dd ("HID: hiddev: use
usb_find_interface, get rid of BKL").

This device appears in dmesg as:
apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device
[Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0

It stopped working as lircd was getting ENODEV when opening /dev/usb/hiddev0.

AFAICS hiddev_driver is a dummy driver so usb_find_interface(&hiddev_driver)
does not find anything.

The device is associated with the usbhid driver, so let's do
usb_find_interface(&hid_driver) instead.

$ ls -l /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver
lrwxrwxrwx 1 root root 0 2010-09-12 16:28 /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver -> ../../../../../../bus/usb/drivers/usbhid
Signed-off-by: default avatarGuillaume Chazarain <guichaz@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      8fe294ca
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7