- 20 Nov, 2004 5 commits
-
-
Nicolas Pitre authored
Patch from Nicolas Pitre This is preemption unsafe and rather not pretty. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King
-
Christoph Hellwig authored
Patch from Christoph Hellwig These routine in arm is unused (in fact not even compiled). Instead of converting it to local_softirq_pending I'd suggest just removing it as below as it's been there totally unused for a long time.
-
Russell King authored
The special non-signalling NaN flag was escaping and setting some FPSCR exception enable flags. Ensure that this flag is masked out before we update the FPSCR.
-
Russell King authored
-
Russell King authored
Clean up sparse warnings in rtctime.c and netwinder-hw.c
-
- 19 Nov, 2004 35 commits
-
-
Brian Gerst authored
I cross-checked the functions called by the BUILD_INTERRUPT macros and came up with this patch. Even though some of these functions currently take no args I made them all consistent. Some functions in the Voyager code that are not directly called from asm code become static. Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
bk://linux-scsi.bkbits.net/scsi-for-linus-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Jens Axboe authored
Return 0 from queuecommand, if the command has been completed already. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Jens Axboe authored
If the command is already completed, megaraid_queue_command() must return 0. Signed-off-by:
-
Jens Axboe authored
aac_read() and aac_write() may complete a command but return -1, which is propagated through aac_scsi_cmd() to the mid layer through ->queuecommand. If the command has been completed, it must return 0. Signed-off-by:
-
Jens Axboe authored
The driver appropriately returns SCSI_MLQUEUE_HOST_BUSY, but it has already completed the command. Just return 0 instead and let the mid layer handle it through scsi_done(). Signed-off-by:
-
Jens Axboe authored
One more case of returning non-zero with a completed command. Signed-off-by:
-
Jens Axboe authored
In case of scb allocation failure, mega_build_cmd() can return NULL scb but set busy, which causes a non-zero return from ->queuecommand() while the scsi command has been completed. Just returning busy without calling done() should be enough for appropriate retries. Signed-off-by:
-
Jens Axboe authored
ide-scsi completes a command but returns ownership to the mid layer. Signed-off-by:
-
Jens Axboe authored
If your ->queuecommand() completes a command through done, it must not return non-zero to the mid layer so that it takes ownership of the command again. Signed-off-by:
-
Andi Kleen authored
Increase time fallback threshold Otherwise ACPI triggers it too often. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Fix early oopses Without this very early oopses crash recursively while trying to figure out the current CPU number. Based on a patch by James Cleverdon. Signed-off-by:
-
Andi Kleen authored
Fix interaction between nosmp and pcibios_fixup_irqs(). Originally from Oleg Nesterov via i386 When we boot with nosmp we dont have all the mptable info, so IO_APIC_get_PCI_irq_vector() doesnt work and devices just end up getting a wrong interrupt. Signed-off-by:
-
Andi Kleen authored
Fix incorrect alignment in the vsyscall variables that caused vsyscalls to be completely broken. This change should decrease system time during TPC-* tests considerably. Clean up the vmlinux.lds to make it easier readable Do some cleanups in the vsyscall code. Align cacheline_aligned correctly on 128 byte cacheline systems. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
And I didn't feel a thing. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Jan Kara authored
Attached patch adds missing DQUOT_OFF to the umount path of the root filesystem (it is only remounted read-only and so the usual path with DQUOT_OFF is not taken). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
Change inequalities for deciding when a user has cleaned up enough space to be below softlimit to match the ones for deciding when the softlimit has been exceeded. Signed-off-by:
-
Haroldo Gamal authored
The patches attached here fixes the BUG #3758 - "Broken symlinks on smbfs with 2.6.10-rc[12]". There are two patches, one to be applied over version 2.6.9 and the other over 2.6.10-rc2. The old utilities (and the old driver) uses uid=0, gid=0, dmask=0 and fmask=0 to flag the lack of this parameters on the mount command line. When the user do not specify the uid, gid, fmask or dmask, the current driver will assign gid=root, gid=root, dmask=755, fmask=755. This behavior is similar to the old 2.x samba versions. To make the driver see the permissions and ownership assigned on the server, "smbmount" and "smbmnt" utilities must be patched. The patches is already available on the attached patches at Bug #3330 or Samba Bug #999. Signed-off-by:
-
Roland Dreier authored
<linux/mount.h> uses atomic_t and spinlock_t, but doesn't include either <asm/atomic.h> or <linux/spinlock.h>, which means that any users of <linux/mount.h> have to include them. This patch adds the necessary #includes to avoid this. Signed-off-by:
Roland Dreier <roland@topspin.com> Signed-off-by:
-
Adrian Bunk authored
There's not much value in shipping Changelogs that weren't updated since at least 2.4.0. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andrew Morton authored
Acked-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Magnus Damm authored
The kernel parameter "nohighio" seems to be gone in the code, but the parameter is still left in the documentation. Signed-off-by:
-
Neil Brown authored
Problem identified by Jan Kasprzak. Limit on domainname_max (currently 50) is too small. Just use the beginning of input buffer as scratch space for it, and save a little stack space while we're at it. Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Daniel Drake authored
This patch adds LOG_SENSE as a read-ok command. cdrecord-prodvd uses this. I also added LOG_SELECT as write-ok as this seems to fit in as well. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Acked-by:
-
Prasanna Meda authored
Looking at get_task_comm patch: http://linus.bkbits.net:8080/linux-2.5/patch@1.1803.144.3 There is one other place where task->comm is accessed outside current. There are two issues. The code is trying to copy to temp space without task_lock. It is not using temp space for actual user copy. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Colin Leroy authored
This patch replaces MODULE_PARM to module_param for adt746x. Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
-
Oleg Nesterov authored
Uninlining do_trap() saves 544 bytes in traps.o. get_cr2() seems to be unused, remove it. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Stelian Pop authored
The sonypi_camera_command() used to fail without returning an error code if the user fergot to enable the camera in the sonypi module (using the camera=1 module parameter). This caused the meye driver to apparently load correctly but miserably fail later, when trying to access the camera for getting some data out of it. This patch adds an error code to sonypi_camera_command() and makes the meye driver check for it in the PCI probe routine. If the function fails, a message is printed in the kernel logs reminding the user it should better RTFM. The patch also removes some sonypi_camera_command() commands (those supposed to return the current camera settings) which are unreliable. The meye driver does not use them anyway. Signed-off-by:
Stelian Pop <stelian@popies.net> Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Martin Schwidefsky authored
From: Heiko Carstens <heiko.carstens@de.ibm.com> Remove the disputed hba api event callback code. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Start fixing KBUILD_OUTPUT support for UML. These changes are trivial and no-ops when this feature is not enabled - the "hard part" of this support is under discussion because it's hard to do properly (UML uses both shipped and build-generated headers from a lot of different directories, and for good reasons). Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Update/add some copyright notices. Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Update defconfigs for 2.6.10-rc2 Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
M68k I/O: Move HP300 I/O macros close to other I/O macros again (after merge error in 2.6.10-rc2) Signed-off-by:
-
Geert Uytterhoeven authored
fm2fb: Update Steffen A. Mork's email address Signed-off-by:
Steffen A. Mork <linux-dev@morknet.de> Signed-off-by:
-
