- 11 Nov, 2015 11 commits
-
-
Brian Norris authored
All of these drivers set up a parser data struct just to communicate DT partition data. This field has been deprecated and is instead supported by telling nand_scan_ident() about the 'flash_node'. This patch: * sets chip->flash_node for those drivers that didn't already (but used OF partitioning) * drops the parser data * switches to the simpler mtd_device_register() where possible, now that we've eliminated one of the auxiliary parameters Now that we've assigned chip->flash_node for these drivers, we can probably rely on nand_dt_init() to do more of the DT parsing for us, but for now, I don't want to fiddle with each of these drivers. The parsing is done in duplicate for now on some drivers. I don't think this should break things. (Famous last words.) (Rolled in some changes by Boris Brezillon) Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
Brian Norris authored
Used semantic patch with 'make coccicheck MODE=patch COCCI=script.cocci': ---8<---- virtual patch @@ struct spi_nor b; struct spi_nor *c; expression d; @@ ( -(b).flash_node = (d) +spi_nor_set_flash_node(&b, d) | -(c)->flash_node = (d) +spi_nor_set_flash_node(c, d) ) ---8<---- And a manual conversion for the one use of spi_nor_get_flash_node(). Signed-off-by:
-
Brian Norris authored
Used semantic patch with 'make coccicheck MODE=patch COCCI=script.cocci': ---8<---- virtual patch @@ struct nand_chip *c; struct device_node *d; @@ -(c)->flash_node = (d) +nand_set_flash_node(c, d) ---8<---- Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
-
Brian Norris authored
We should pass along our flash DT node to the MTD layer, so it can set up ofpart for us. Signed-off-by:
-
Brian Norris authored
It seems more logical to use a device node directly associated with the MTD master device (i.e., mtd->dev.of_node field) rather than requiring auxiliary partition parser information to be passed in by the driver in a separate struct. This patch supports the mtd->dev.of_node field and deprecates the parser data 'of_node' field Driver conversions may now follow. Additional side benefit to assigning mtd->dev.of_node rather than using parser data: the driver core will automatically create a device -> node symlink for us. Signed-off-by:
-
Brian Norris authored
We are going to begin using the mtd->dev.of_node field for MTD device nodes, so let's add helpers for it. Also, we'll be making some conversions on spi_nor (and nand_chip eventually) too, so get that ready with their own helpers. Signed-off-by:
-
Bayi Cheng authored
Add device tree binding documentation for serial flash with Mediatek serial flash controller Signed-off-by:
Bayi Cheng <bayi.cheng@mediatek.com> Acked-by:
Rob Herring <robh@kernel.org> [Brian: fixed up language] Signed-off-by:
-
Linus Walleij authored
Return immediately if we are not finding a valid v1 partition in afs_read_footer_v1(), invert scanning logic so we continue to read image information on v1 if we found a footer. This is needed for the logic we introduce to parse v2 footers. Cc: Ryan Harkin <ryan.harkin@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
Break out the magic number to a #defined constant. Cc: Ryan Harkin <ryan.harkin@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Linus Walleij authored
ARM use their special partitions also on the ARM64 architecture reference designs, so enable this for ARM64. Cc: Ryan Harkin <ryan.harkin@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Linus Walleij authored
Since we're gonna add the v2 version of flash information structure and we want to avoid confusion, rename the old functions to *v1. Cut the word "structure" from the struct name, it is pretty obvious that it is a struct already from the keyword. Cc: Ryan Harkin <ryan.harkin@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
- 10 Nov, 2015 1 commit
-
-
Michal Suchanek authored
The lock flag of ofpart is undocumented. Add to binding doc. Signed-off-by:
Michal Suchanek <hramrach@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
-
- 06 Nov, 2015 1 commit
-
-
Brian Norris authored
There are multiple types of users of mtd->reboot_notifier.notifier_call: (1) A while back, the cfi_cmdset_000{1,2} chip drivers implemented a reboot notifier to (on a best effort basis) attempt to reset their flash chips before rebooting. (2) More recently, we implemented a common _reboot() hook so that MTD drivers (particularly, NAND flash) could better halt I/O operations without having to reimplement the same notifier boilerplate. Currently, the WARN_ONCE() condition here was written to handle (2), but at the same time it mis-diagnosed case (1) as an already-registered MTD. Let's fix this by having the WARN_ONCE() condition better imitate the condition that immediately follows it. (Wow, I don't know how I missed that one.) (Side note: Unfortunately, we can't yet combine the reboot notifier code for (1) and (2) with a patch like [1], because some users of (1) also use mtdconcat, and so the mtd_info struct from cfi_cmdset_000{1,2} won't actually get registered with mtdcore, and therefore their reboot notifier won't get registered.) [1] http://patchwork.ozlabs.org/patch/417981/Suggested-by:Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by:
-
- 02 Nov, 2015 2 commits
-
-
Boris BREZILLON authored
The in-band data are copied twice: before ECC correction and after the ECC engine has fixed all the fixable bitflips. Drop the useless memcpy_fromio operation by passing a NULL pointer when calling sunxi_nfc_read_buf(). Signed-off-by:
-
Boris BREZILLON authored
The sunxi_nfc_hw_ecc_read/write_chunk() functions try to avoid changing the column address if unnecessary, but the logic to determine whether it's necessary or not is currently wrong: it adds the ecc->bytes value to the current offset where it should actually add ecc->size. Fixes: 913821bd ("mtd: nand: sunxi: introduce sunxi_nfc_hw_ecc_read/write_chunk()") Signed-off-by:
-
- 31 Oct, 2015 1 commit
-
-
Brian Norris authored
Commit 073db4a5 ("mtd: fix: avoid race condition when accessing mtd->usecount") fixed a race condition but due to poor ordering of the mutex acquisition, introduced a potential deadlock. The deadlock can occur, for example, when rmmod'ing the m25p80 module, which will delete one or more MTDs, along with any corresponding mtdblock devices. This could potentially race with an acquisition of the block device as follows. -> blktrans_open() -> mutex_lock(&dev->lock); -> mutex_lock(&mtd_table_mutex); -> del_mtd_device() -> mutex_lock(&mtd_table_mutex); -> blktrans_notify_remove() -> del_mtd_blktrans_dev() -> mutex_lock(&dev->lock); This is a classic (potential) ABBA deadlock, which can be fixed by making the A->B ordering consistent everywhere. There was no real purpose to the ordering in the original patch, AFAIR, so this shouldn't be a problem. This ordering was actually already present in del_mtd_blktrans_dev(), for one, where the function tried to ensure that its caller already held mtd_table_mutex before it acquired &dev->lock: if (mutex_trylock(&mtd_table_mutex)) { mutex_unlock(&mtd_table_mutex); BUG(); } So, reverse the ordering of acquisition of &dev->lock and &mtd_table_mutex so we always acquire mtd_table_mutex first. Snippets of the lockdep output follow: # modprobe -r m25p80 [ 53.419251] [ 53.420838] ====================================================== [ 53.427300] [ INFO: possible circular locking dependency detected ] [ 53.433865] 4.3.0-rc6 #96 Not tainted [ 53.437686] ------------------------------------------------------- [ 53.444220] modprobe/372 is trying to acquire lock: [ 53.449320] (&new->lock){+.+...}, at: [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.457271] [ 53.457271] but task is already holding lock: [ 53.463372] (mtd_table_mutex){+.+.+.}, at: [<c0439994>] del_mtd_device+0x18/0x100 [ 53.471321] [ 53.471321] which lock already depends on the new lock. [ 53.471321] [ 53.479856] [ 53.479856] the existing dependency chain (in reverse order) is: [ 53.487660] -> #1 (mtd_table_mutex){+.+.+.}: [ 53.492331] [<c043fc5c>] blktrans_open+0x34/0x1a4 [ 53.497879] [<c01afce0>] __blkdev_get+0xc4/0x3b0 [ 53.503364] [<c01b0bb8>] blkdev_get+0x108/0x320 [ 53.508743] [<c01713c0>] do_dentry_open+0x218/0x314 [ 53.514496] [<c0180454>] path_openat+0x4c0/0xf9c [ 53.519959] [<c0182044>] do_filp_open+0x5c/0xc0 [ 53.525336] [<c0172758>] do_sys_open+0xfc/0x1cc [ 53.530716] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.536375] -> #0 (&new->lock){+.+...}: [ 53.540587] [<c063f124>] mutex_lock_nested+0x38/0x3cc [ 53.546504] [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.552606] [<c043f164>] blktrans_notify_remove+0x7c/0x84 [ 53.558891] [<c04399f0>] del_mtd_device+0x74/0x100 [ 53.564544] [<c043c670>] del_mtd_partitions+0x80/0xc8 [ 53.570451] [<c0439aa0>] mtd_device_unregister+0x24/0x48 [ 53.576637] [<c046ce6c>] spi_drv_remove+0x1c/0x34 [ 53.582207] [<c03de0f0>] __device_release_driver+0x88/0x114 [ 53.588663] [<c03de19c>] device_release_driver+0x20/0x2c [ 53.594843] [<c03dd9e8>] bus_remove_device+0xd8/0x108 [ 53.600748] [<c03dacc0>] device_del+0x10c/0x210 [ 53.606127] [<c03dadd0>] device_unregister+0xc/0x20 [ 53.611849] [<c046d878>] __unregister+0x10/0x20 [ 53.617211] [<c03da868>] device_for_each_child+0x50/0x7c [ 53.623387] [<c046eae8>] spi_unregister_master+0x58/0x8c [ 53.629578] [<c03e12f0>] release_nodes+0x15c/0x1c8 [ 53.635223] [<c03de0f8>] __device_release_driver+0x90/0x114 [ 53.641689] [<c03de900>] driver_detach+0xb4/0xb8 [ 53.647147] [<c03ddc78>] bus_remove_driver+0x4c/0xa0 [ 53.652970] [<c00cab50>] SyS_delete_module+0x11c/0x1e4 [ 53.658976] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.664621] [ 53.664621] other info that might help us debug this: [ 53.664621] [ 53.672979] Possible unsafe locking scenario: [ 53.672979] [ 53.679169] CPU0 CPU1 [ 53.683900] ---- ---- [ 53.688633] lock(mtd_table_mutex); [ 53.692383] lock(&new->lock); [ 53.698306] lock(mtd_table_mutex); [ 53.704658] lock(&new->lock); [ 53.707946] [ 53.707946] *** DEADLOCK *** Fixes: 073db4a5 ("mtd: fix: avoid race condition when accessing mtd->usecount") Reported-by:
Felipe Balbi <balbi@ti.com> Tested-by:
-
- 30 Oct, 2015 4 commits
-
-
Michal Suchanek authored
Parsing direct subnodes of a mtd device as partitions is unreliable since the mtd device is also part of its bus subsystem and can contain bus data in subnodes. Move ofpart data to a subnode of its own so it is clear which data is part of the partition layout. Signed-off-by:
-
Michal Suchanek authored
To avoid conflict with other drivers using subnodes of the mtd device create only one ofpart-specific node rather than any number of arbitrary partition subnodes. Signed-off-by:
-
Anup Patel authored
Just like other NAND controllers, the NAND READID command only works in 8bit mode for all versions of BRCMNAND controller. This patch forces 8bit mode for each NAND CS in brcmnand_init_cs() before doing nand_scan_ident() to ensure that BRCMNAND controller is in 8bit mode when NAND READID command is issued. Signed-off-by:
Anup Patel <anup.patel@broadcom.com> Reviewed-by:
Ray Jui <rjui@broadcom.com> Reviewed-by:
Scott Branden <sbranden@broadcom.com> Signed-off-by:
-
Brian Norris authored
Use enum instead of magic numbers for CFG and CFG_EXT bitfields. Signed-off-by:
-
- 27 Oct, 2015 1 commit
-
-
Brian Norris authored
Due to wrong assumption in ofpart ofpart fails on Exynos on SPI chips with no partitions because the subnode containing controller data confuses the ofpart parser. Thus compiling in ofpart support automatically fails probing any SPI NOR flash without partitions on Exynos. Compiling in a partitioning scheme should not cause probe of otherwise valid device to fail. Instead, let's do the following: * try parsers until one succeeds * if no parser succeeds, report the first error we saw * even in the failure case, allow MTD to probe, with fallback partitions or no partitions at all -- the master device will still be registered Issue report and comments initially by Michal Suchanek. Reported-by:
-
- 26 Oct, 2015 12 commits
-
-
Han Xu authored
Change the READ/WRITE to FSL_READ/FSL_WRITE to resolve any possible namespace collisions with READ/WRITE macros (e.g., from <linux/fs.h>). Problems have been seen, for example, on mips: >> drivers/mtd/spi-nor/fsl-quadspi.c:186:5: error: 'LUT_0' undeclared (first use in this function) ((LUT_##ins) << INSTR0_SHIFT)) ^ >> drivers/mtd/spi-nor/fsl-quadspi.c:188:30: note: in expansion of macro 'LUT0' On SPARC: drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_init_lut': drivers/mtd/spi-nor/fsl-quadspi.c:369:1: error: 'LUT_0' undeclared (first use in this function) drivers/mtd/spi-nor/fsl-quadspi.c:418:1: error: pasting "LUT_" and "(" does not give a valid preprocessing token drivers/mtd/spi-nor/fsl-quadspi.c:418:2: error: implicit declaration of function 'LUT_' And surely on others. Fixes: d26a22d0 ("mtd: fsl-quadspi: allow building for other ARCHes with COMPILE_TEST") Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Han Xu <b45815@freescale.com> [Brian: rewrote commit description] Signed-off-by:
-
Brian Norris authored
When CONFIG_MTD_PARTITIONED_MASTER=y, it is fatal to call mtd_device_parse_register() twice on the same MTD, as we try to register the same device/kobject multipile times. When CONFIG_MTD_PARTITIONED_MASTER=n, calling mtd_device_parse_register() is more of just a nuisance, as we can mostly navigate around any conflicting actions. But anyway, doing so is a Bad Thing (TM), and we should complain loudly for any drivers that try to do this. Signed-off-by:
Richard Weinberger <richard@nod.at>
-
Brian Norris authored
Since commit 3efe41be ("mtd: implement common reboot notifier boilerplate"), we might try to register a reboot notifier for an MTD that failed to register. Let's avoid this by making the error path clearer. Signed-off-by:
-
Shraddha Barke authored
Changes the 32-bit time type timeval to the 64-bit time type ktime_t, since 32-bit systems using struct timeval will break in the year 2038. Correspondingly change do_gettimeofday() to ktime_get() since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval.Here, ktime_get() is used instead of ktime_get_real() since ktime_get() uses monotonic clock. Signed-off-by:
Shraddha Barke <shraddha.6596@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stefan Roese authored
This patch adds support for 4-bit ECC BCH4 for the SPEAr600 SoC. This can be used by boards equipped with a NAND chip that requires 4-bit ECC strength. The SPEAr600 HW ECC only supports 1-bit ECC strength. To enable SW BCH4, you need to specify this in your nand controller DT node: nand-ecc-mode = "soft_bch"; nand-ecc-strength = <4>; nand-ecc-step-size = <512>; Tested on a custom SPEAr600 board. Signed-off-by:
Stefan Roese <sr@denx.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> [Brian: tweaked the comments a bit] Signed-off-by:
-
Brian Norris authored
Signed-off-by:
-
Alex Smith authored
If nand_wait_ready() times out, this is silently ignored, and its caller will then proceed to read from/write to the chip before it is ready. This can potentially result in corruption with no indication as to why. While a 20ms timeout seems like it should be plenty enough, certain behaviour can cause it to timeout much earlier than expected. The situation which prompted this change was that CPU 0, which is responsible for updating jiffies, was holding interrupts disabled for a fairly long time while writing to the console during a printk, causing several jiffies updates to be delayed. If CPU 1 happens to enter the timeout loop in nand_wait_ready() just before CPU 0 re- enables interrupts and updates jiffies, CPU 1 will immediately time out when the delayed jiffies updates are made. The result of this is that nand_wait_ready() actually waits less time than the NAND chip would normally take to be ready, and then read_page() proceeds to read out bad data from the chip. The situation described above may seem unlikely, but in fact it can be reproduced almost every boot on the MIPS Creator Ci20. Therefore, this patch increases the timeout to 400ms. This should be enough to cover cases where jiffies updates get delayed. In nand_wait() the timeout was previously chosen based on whether erasing or programming. This is changed to be 400ms unconditionally as well to avoid similar problems there. nand_wait() is also slightly refactored to be consistent with nand_wait{,_status}_ready(). These changes should have no effect during normal operation. Debugging this was made more difficult by the misleading comment above nand_wait_ready() stating "The timeout is caught later" - no timeout was ever reported, leading me away from the real source of the problem. Therefore, a pr_warn() is added when a timeout does occur so that it is easier to pinpoint similar problems in future. Signed-off-by:Alex Smith <alex.smith@imgtec.com> Signed-off-by:
Harvey Hunt <harvey.hunt@imgtec.com> Reviewed-by:
Niklas Cassel <niklas.cassel@axis.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Dan Carpenter authored
Smatch found a bug in the error handling: drivers/mtd/devices/docg3.c:1634 doc_register_sysfs() error: buffer overflow 'doc_sys_attrs' 4 <= 4 The problem is that if the very last device_create_file() fails, then we are beyond the end of the array. Actually, any time i == 3 then there is a problem. We can fix this an simplify the code at the same time by moving the !ret conditions out of the for loops and using a goto instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Antoine Ténart authored
With the previous modifications, lots of pxa3xx specific definitions can be removed. Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by:
-
Antoine Ténart authored
Rework the pxa3xx_nand driver to allow using functions exported by the nand framework to detect the flash and the timings. Then setup the timings using the helpers previously added. Signed-off-by:
-
Antoine Ténart authored
Add helpers to setup the timings in the pxa3xx driver. These helpers allow to either make use of the nand framework nand_sdr_timings or the pxa3xx specific pxa3xx_nand_host, for compatibility reasons. Signed-off-by:
-
Antoine Ténart authored
Using readsl() result in a build error on i386. Fix this by using ioread32_rep() instead, to allow compile testing the pxa3xx nand driver on other architectures later. Suggested-by:
-
- 20 Oct, 2015 5 commits
-
-
Vladimir Zapolskiy authored
If common clock framework is configured, the driver generates a warning, which is fixed by this change: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #206 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_nand_probe+0x208/0x248) [<>] (lpc32xx_nand_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc32xx_nand_driver_init+0x18/0x20) [<>] (lpc32xx_nand_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by:Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Vladimir Zapolskiy authored
If common clock framework is configured, the driver generates a warning, which is fixed by this change: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #201 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_nand_probe+0x290/0x568) [<>] (lpc32xx_nand_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc32xx_nand_driver_init+0x18/0x20) [<>] (lpc32xx_nand_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: -
Brian Norris authored
We got the syntax wrong here. Compile tested this time! Error: drivers/mtd/maps/rbtx4939-flash.c: In function 'rbtx4939_flash_probe': >> drivers/mtd/maps/rbtx4939-flash.c:99:11: error: request for member 'dev' in something not a structure or union info->mtd.dev.parent = &dev->dev; ^ Fixes: 9aa7e502 ("mtd: maps: rbtx4939-flash: show parent device in sysfs") Reported-by: -
Mikko Rapeli authored
Kernel headers should use linux/types.h instead. Signed-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
-
Dongsheng Yang authored
We should prevent user to erasing mtd device with an unaligned offset or length. Signed-off-by:
Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by:
-
- 19 Oct, 2015 2 commits
-
-
Brian Norris authored
The old PM model is deprecated. This is equivalent. Signed-off-by:
-
Brian Norris authored
mtd_{suspend,resume}() get called from mtdcore in a class suspend/resume callback. We don't need to call them again here. In practice, this would actually work OK, as nand_base actually handles nesting OK -- it just might print warnings. Untested, but there are few (no?) users of PM for this driver AFAIK. Signed-off-by:
-
