- 09 Jul, 2016 9 commits
-
-
Nikolay Aleksandrov authored
As was suggested this patch adds support for the different versions of MLD and IGMP query types. Since the user visible structure is still in net-next we can augment it instead of adding netlink attributes. The distinction between the different IGMP/MLD query types is done as suggested in Section 7.1, RFC 3376 [1] and Section 8.1, RFC 3810 [2] based on query payload size and code for IGMP. Since all IGMP packets go through multicast_rcv() and it uses ip_mc_check_igmp/ipv6_mc_check_mld we can be sure that at least the ip/ipv6 header can be directly used. [1] https://tools.ietf.org/html/rfc3376#section-7 [2] https://tools.ietf.org/html/rfc3810#section-8.1Suggested-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
When we introduced GSO support, if using auth the auth chunk was being left queued on the packet even after the final segment was generated. Later on sctp_transmit_packet it calls sctp_packet_reset, which zeroed the packet len while not accounting for this left-over. This caused more space to be used the next packet due to the chunk still being queued, but space which wasn't allocated as its size wasn't accounted. The fix is to only queue it back when we know that we are going to generate another segment. Fixes: 90017acc ("sctp: Add GSO support") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Dan Carpenter authored
This code generates as static checker warning because htons(ETH_P_IPV6) is always true. From the context it looks like the && was intended to be !=. Fixes: 94758f8d ('bnxt_en: Add GRO logic for BCM5731X chips.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Alexei Starovoitov authored
over time there were multiple requests to access different data structures and fields of task_struct current, so finally add the helper to access 'current' as-is. Tracing bpf programs will do the rest of walking the pointers via bpf_probe_read(). Note that current can be null and bpf program has to deal it with, but even dumb passing null into bpf_probe_read() is still safe. Suggested-by:
Brendan Gregg <brendan.d.gregg@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Vivien Didelot authored
The routing table of every switch in a tree is currently initialized to all zeros. This is an issue since 0 is a valid port number. Add a DSA_RTABLE_NONE=-1 constant to initialize the signed values of the routing table pointing to other switches. This fixes the device mapping of the mv88e6xxx driver where the port pointing to the switch itself and to non-existent switches was wrongly configured to be 0. It is now set to the expected 0xf value. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Craig Gallek authored
The referenced change added a netlink notifier for processing device queue size events. These events are fired for all devices but the registered callback assumed they only occurred for tun devices. This fix adds a check (borrowed from macvtap.c) to discard non-tun device events. For reference, this fixes the following splat: [ 71.505935] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 71.513870] IP: [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.519906] PGD 3f41f56067 PUD 3f264b7067 PMD 0 [ 71.524497] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 71.529374] gsmi: Log Shutdown Reason 0x03 [ 71.533417] Modules linked in:[ 71.533826] mlx4_en: eth1: Link Up [ 71.539616] bonding w1_therm wire cdc_acm ehci_pci ehci_hcd mlx4_en ib_uverbs mlx4_ib ib_core mlx4_core [ 71.549282] CPU: 12 PID: 7915 Comm: set.ixion-haswe Not tainted 4.7.0-dbx-DEV #8 [ 71.556586] Hardware name: Intel Grantley,Wellsburg/Ixion_IT_15, BIOS 2.58.0 05/03/2016 [ 71.564495] task: ffff887f00bb20c0 ti: ffff887f00798000 task.ti: ffff887f00798000 [ 71.571894] RIP: 0010:[<ffffffff8153c1a0>] [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.580327] RSP: 0018:ffff887f0079bbd8 EFLAGS: 00010202 [ 71.585576] RAX: fffffffffffffae8 RBX: ffff887ef6d03378 RCX: 0000000000000000 [ 71.592624] RDX: 0000000000000000 RSI: 0000000000000028 RDI: 0000000000000000 [ 71.599675] RBP: ffff887f0079bc48 R08: 0000000000000000 R09: 0000000000000001 [ 71.606730] R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000010 [ 71.613780] R13: 0000000000000000 R14: 0000000000000001 R15: ffff887f0079bd00 [ 71.620832] FS: 00007f5cdc581700(0000) GS:ffff883f7f700000(0000) knlGS:0000000000000000 [ 71.628826] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.634500] CR2: 0000000000000010 CR3: 0000003f3eb62000 CR4: 00000000001406e0 [ 71.641549] Stack: [ 71.643533] ffff887f0079bc08 0000000000000246 000000000000001e ffff887ef6d00000 [ 71.650871] ffff887f0079bd00 0000000000000000 0000000000000000 ffffffff00000000 [ 71.658210] ffff887f0079bc48 ffffffff81d24070 00000000fffffff9 ffffffff81cec7a0 [ 71.665549] Call Trace: [ 71.667975] [<ffffffff810eeb0d>] notifier_call_chain+0x5d/0x80 [ 71.673823] [<ffffffff816365d0>] ? show_tx_maxrate+0x30/0x30 [ 71.679502] [<ffffffff810eeb3e>] __raw_notifier_call_chain+0xe/0x10 [ 71.685778] [<ffffffff810eeb56>] raw_notifier_call_chain+0x16/0x20 [ 71.691976] [<ffffffff8160eb30>] call_netdevice_notifiers_info+0x40/0x70 [ 71.698681] [<ffffffff8160ec36>] call_netdevice_notifiers+0x16/0x20 [ 71.704956] [<ffffffff81636636>] change_tx_queue_len+0x66/0x90 [ 71.710807] [<ffffffff816381ef>] netdev_store.isra.5+0xbf/0xd0 [ 71.716658] [<ffffffff81638350>] tx_queue_len_store+0x50/0x60 [ 71.722431] [<ffffffff814a6798>] dev_attr_store+0x18/0x30 [ 71.727857] [<ffffffff812ea3ff>] sysfs_kf_write+0x4f/0x70 [ 71.733274] [<ffffffff812e9507>] kernfs_fop_write+0x147/0x1d0 [ 71.739045] [<ffffffff81134a4f>] ? rcu_read_lock_sched_held+0x8f/0xa0 [ 71.745499] [<ffffffff8125a108>] __vfs_write+0x28/0x120 [ 71.750748] [<ffffffff8111b137>] ? percpu_down_read+0x57/0x90 [ 71.756516] [<ffffffff8125d7d8>] ? __sb_start_write+0xc8/0xe0 [ 71.762278] [<ffffffff8125d7d8>] ? __sb_start_write+0xc8/0xe0 [ 71.768038] [<ffffffff8125bd5e>] vfs_write+0xbe/0x1b0 [ 71.773113] [<ffffffff8125c092>] SyS_write+0x52/0xa0 [ 71.778110] [<ffffffff817528e5>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 71.784472] Code: 45 31 f6 48 8b 93 78 33 00 00 48 81 c3 78 33 00 00 48 39 d3 48 8d 82 e8 fa ff ff 74 25 48 8d b0 40 05 00 00 49 63 d6 41 83 c6 01 <49> 89 34 d4 48 8b 90 18 05 00 00 48 39 d3 48 8d 82 e8 fa ff ff [ 71.803655] RIP [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.809769] RSP <ffff887f0079bbd8> [ 71.813213] CR2: 0000000000000010 [ 71.816512] ---[ end trace 4db6449606319f73 ]--- Fixes: 1576d986 ("tun: switch to use skb array for tx") Signed-off-by:
Craig Gallek <kraig@google.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160706' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Improve conn/call lookup and fix call number generation [ver #3] I've fixed a couple of patch descriptions and excised the patch that duplicated the connections list for reconsideration at a later date. For reference, the excised patch is sitting on the rxrpc-experimental branch of my git tree, based on top of the rxrpc-rewrite branch. Diffing it against yesterday's tag shows no differences. Would you prefer the patch set to be emailed afresh instead of a git-pull request? David --- Here's the next part of the AF_RXRPC rewrite. The two main purposes of this set are to fix the call number handling and to make use of RCU when looking up the connection or call to pass a received packet to. Important changes in this set include: (1) Avoidance of placing stack data into SG lists in rxkad so that kernel stacks can become vmalloc'd (Herbert Xu). (2) Calls cease pinning the connection they used as soon as possible, which allows the connection to be discarded sooner and allows the call channel on that connection to be reused earlier. (3) Make each call channel on a connection have a separate and independent call number space rather than having a shared number space for the connection. Call numbers should increment monotonically per channel on the client, and the server should ignore a call with a lower call number for that channel than the latest it has seen. The RESPONSE packet sets the minimum values of each call ID counter on a connection. (4) Look up calls by indexing the channel array on a connection rather than by keeping calls in an rbtree on that connection. Also look up calls using the channel array rather than using a hashtable. The call hashtable can then be removed. (5) Call terminal statuses are cached in the channel array for the last call. It is assumed that if we the server have seen call N, then the client no longer cares about call N-1 on the same channel. This will allow retransmission of the terminal status in future without the need to keep the rxrpc_call struct around. (6) Peer lookups are moved out of common connection handling code and into service connection handling code as client connections (a) must point to a peer before they can be used and (b) are looked up by a machine-unique connection ID directly, so we only need to look up the peer first if we're going to deal with a service call. (7) The reference count on a connection is held elevated by 1 whilst it is alive (ie. idle unused connections have a refcount of 1). The reaper will attempt to change the refcount from 1->0 and skip if this cannot be done, whilst look ups only increment the refcount if it's non-zero. This makes the implementation of RCU lookups easier as we don't have to get a ref on the connection or a lock on the connection list to prevent a connection being reaped whilst we're contemplating queueing a packet that initiates a new service call upon it. If we need to get a connection, but there's a dead connection in the tree, we use rb_replace_node() to replace the dead one with a new one. (8) Use a seqlock to validate the walk over the service connection rbtree attached to a peer when it's being walked in RCU mode. (9) Make the incoming call/connection packet handling code use RCU mode and locks and make it only take a reference if the call/connection gets queued on a workqueue. The intention is that the next set will introduce the connection lifetime management and capacity limits to prevent clients from overloading the server. There are some fixes too: (1) Verifying that a packet coming in to a client connection came from the expected source. (2) Fix handling of connection failure in client call creation where we don't reinitialise the list linkage block and a second attempt to unlink the failed connection oopses and also we don't set the state correctly, which causes an assertion failure. (3) New service calls were being added to the socket's accept queue under the wrong lock. Changes: (V2) In rxrpc_find_service_conn_rcu() initialised the sequence number to 0. Fixed the RCU handling in conn_service.c by introducing and using rb_replace_node_rcu() as an RCU-safe alternative in rxrpc_publish_service_conn(). Modified and used rcu_dereference_raw() to avoid RCU sparse warnings in rxrpc_find_service_conn_rcu(). Added in some missing RCU dereference wrappers. It seems to be necessary to turn on CONFIG_PROVE_RCU_REPEATEDLY as well as CONFIG_SPARSE_RCU_POINTER to get the static __rcu annotation checking to happen. Fixed some other sparse warnings, including a missing ntohs() in jumbo packet processing. (V3) Fixed some commit descriptions. Excised the patch that duplicated the connection list to separate out the procfs list for reconsideration at a later date. ==================== Signed-off-by:
-
K. Y. Srinivasan authored
Use the new APIs for eliminating a copy on the receive path. These new APIs also help in minimizing the number of memory barriers we end up issuing (in the ringbuffer code) since we can better control when we want to expose the ring state to the host. The patch is being resent to address earlier email issues. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Florian Westphal authored
hfsc_sched is huge (size: 920, cachelines: 15), but we can get it to 14 cachelines by placing level after filter_cnt (covering 4 byte hole) and reducing period/nactive/flags to u32 (period is just a counter, incremented when class becomes active -- 2**32 is plenty for this purpose, also, long is only 32bit wide on 32bit platforms anyway). cl_vtperiod is exported to userspace via tc_hfsc_stats, but its period member is already u32, so no precision is lost there either. Cc: Michal Soltys <soltys@ziu.info> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 07 Jul, 2016 2 commits
-
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2016-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One more set of new features: * beacon report (for radio measurement) support in cfg80211/mac80211 * hwsim: allow wmediumd in namespaces * mac80211: extend 160MHz workaround to CSA IEs * mesh: properly encrypt group-addressed privacy action frames * mesh: allow setting peer AID * first steps for MU-MIMO monitor mode * along with various other cleanups and improvements ==================== Signed-off-by:
-
Wei Yongjun authored
Remove .owner field since calls to module_platform_driver() will set it automatically. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
- 06 Jul, 2016 29 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en.h drivers/net/ethernet/mellanox/mlx5/core/en_main.c drivers/net/usb/r8152.c All three conflicts were overlapping changes. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) All users of AF_PACKET's fanout feature want a symmetric packet header hash for load balancing purposes, so give it to them. 2) Fix vlan state synchronization in e1000e, from Jarod Wilson. 3) Use correct socket pointer in ip_skb_dst_mtu(), from Shmulik Ladkani. 4) mlx5 bug fixes from Mohamad Haj Yahia, Daniel Jurgens, Matthew Finlay, Rana Shahout, and Shaker Daibes. Mostly to do with operation timeouts and PCI error handling. 5) Fix checksum handling in mirred packet action, from WANG Cong. 6) Set skb->dev correctly when transmitting in !protect_frames case of macsec driver, from Daniel Borkmann. 7) Fix MTU calculation in geneve driver, from Haishuang Yan. 8) Missing netif_napi_del() in unregister path of qeth driver, from Ursula Braun. 9) Handle malformed route netlink messages in decnet properly, from Vergard Nossum. 10) Memory leak of percpu data in ipv6 routing code, from Martin KaFai Lau. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) ipv6: Fix mem leak in rt6i_pcpu net: fix decnet rtnexthop parsing cxgb4: update latest firmware version supported net/mlx5: Avoid setting unused var when modifying vport node GUID bonding: fix enslavement slave link notifications r8152: fix runtime function for RTL8152 qeth: delete napi struct when removing a qeth device Revert "fsl/fman: fix error handling" fsl/fman: fix error handling cdc_ncm: workaround for EM7455 "silent" data interface RDS: fix rds_tcp_init() error path geneve: fix max_mtu setting net: phy: dp83867: Fix initialization of PHYCR register enc28j60: Fix race condition in enc28j60 driver net: stmmac: Fix null-function call in ISR on stmmac1000 tipc: fix nl compat regression for link statistics net: bcmsysport: Device stats are unsigned long macsec: set actual real device for xmit when !protect_frames net_sched: fix mirrored packets checksum packet: Use symmetric hash for PACKET_FANOUT_HASH. ... -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, they are: 1) Don't use userspace datatypes in bridge netfilter code, from Tobin Harding. 2) Iterate only once over the expectation table when removing the helper module, instead of once per-netns, from Florian Westphal. 3) Extra sanitization in xt_hook_ops_alloc() to return error in case we ever pass zero hooks, xt_hook_ops_alloc(): 4) Handle NFPROTO_INET from the logging core infrastructure, from Liping Zhang. 5) Autoload loggers when TRACE target is used from rules, this doesn't change the behaviour in case the user already selected nfnetlink_log as preferred way to print tracing logs, also from Liping Zhang. 6) Conntrack slabs with SLAB_HWCACHE_ALIGN to allow rearranging fields by cache lines, increases the size of entries in 11% per entry. From Florian Westphal. 7) Skip zone comparison if CONFIG_NF_CONNTRACK_ZONES=n, from Florian. 8) Remove useless defensive check in nf_logger_find_get() from Shivani Bhardwaj. 9) Remove zone extension as place it in the conntrack object, this is always include in the hashing and we expect more intensive use of zones since containers are in place. Also from Florian Westphal. 10) Owner match now works from any namespace, from Eric Bierdeman. 11) Make sure we only reply with TCP reset to TCP traffic from nf_reject_ipv4, patch from Liping Zhang. 12) Introduce --nflog-size to indicate amount of network packet bytes that are copied to userspace via log message, from Vishwanath Pai. This obsoletes --nflog-range that has never worked, it was designed to achieve this but it has never worked. 13) Introduce generic macros for nf_tables object generation masks. 14) Use generation mask in table, chain and set objects in nf_tables. This allows fixes interferences with ongoing preparation phase of the commit protocol and object listings going on at the same time. This update is introduced in three patches, one per object. 15) Check if the object is active in the next generation for element deactivation in the rbtree implementation, given that deactivation happens from the commit phase path we have to observe the future status of the object. 16) Support for deletion of just added elements in the hash set type. 17) Allow to resize hashtable from /proc entry, not only from the obscure /sys entry that maps to the module parameter, from Florian Westphal. 18) Get rid of NFT_BASECHAIN_DISABLED, this code is not exercised anymore since we tear down the ruleset whenever the netdevice goes away. 19) Support for matching inverted set lookups, from Arturo Borrero. 20) Simplify the iptables_mangle_hook() by removing a superfluous extra branch. 21) Introduce ether_addr_equal_masked() and use it from the netfilter codebase, from Joe Perches. 22) Remove references to "Use netfilter MARK value as routing key" from the Netfilter Kconfig description given that this toggle doesn't exists already for 10 years, from Moritz Sichert. 23) Introduce generic NF_INVF() and use it from the xtables codebase, from Joe Perches. 24) Setting logger to NONE via /proc was not working unless explicit nul-termination was included in the string. This fixes seems to leave the former behaviour there, so we don't break backward. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here are a collection of small fixes: at this time, we've got a slightly high amount, but all small and trivial fixes, and nothing scary can be seen there" * tag 'sound-4.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup ALSA: timer: Fix negative queue usage by racy accesses ASoC: rt5645: fix reg-2f default value. ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift() ALSA: hda - Add PCI ID for Kabylake-H ALSA: echoaudio: Fix memory allocation ASoC: Intel: atom: fix missing breaks that would cause the wrong operation to execute ALSA: hda - fix read before array start ASoC: cx20442: set tty->receiver_room in v253_open ASoC: ak4613: Enable cache usage to fix crashes on resume ASoC: wm8940: Enable cache usage to fix crashes on resume ASoC: Intel: Skylake: Initialize module list for Broxton ASoC: wm5102: Correct supported channels on trace compressed DAI ASoC: wm5110: Add missing route from OUT3R to SYSCLK ASoC: rt5670: fix HP Playback Volume control ASoC: hdmi-codec: select CONFIG_HDMI ASoC: davinci-mcasp: Fix dra7 DMA offset when using CFG port ASoC: hdac_hdmi: Fix potential NULL dereference ASoC: ak4613: Remove owner assignment from platform_driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platformLinus Torvalds authored
Pull chrome platform fix from Olof Johansson: "A single fix this time, closing a window where ioctl args are fetched twice" * tag 'chrome-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: cros_ec_dev - double fetch bug in ioctl
-
Masashi Honma authored
Previously, mesh power management functionality works only with kernel MPM. Because user space MPM did not report mesh peer AID to kernel, the kernel could not identify the bit in TIM element. So this patch adds mesh peer AID setting API. Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Continuing the workaround implemented in commit 23665aaf ("mac80211: Interoperability workaround for 80+80 and 160 MHz channels") use the same code to parse the Wide Bandwidth Channel Switch element by converting to VHT Operation element since the spec also just refers to that for parsing semantics, particularly with the workaround. While at it, remove some dead code - the IEEE80211_STA_DISABLE_40MHZ flag can never be set at this point since it's checked earlier and the wide_bw_chansw_ie pointer is set to NULL if it's set. Signed-off-by:
-
Johannes Berg authored
Rather than reporting the scan as having completed, report it as being aborted. Signed-off-by: -
Avraham Stern authored
Add the following to support beacon report radio measurement with the measurement mode field set to passive or active: 1. Propagate the required scan duration to the device 2. Report the scan start time (in terms of TSF) 3. Report each BSS's detection time (also in terms of TSF) TSF times refer to the BSS that the interface that requested the scan is connected to. Signed-off-by:
Assaf Krauss <assaf.krauss@intel.com> Signed-off-by:
Avraham Stern <avraham.stern@intel.com> [changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match the new API] Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Avraham Stern authored
Beacon report radio measurement requires reporting observed BSSs on the channels specified in the beacon request. If the measurement mode is set to passive or active, it requires actually performing a scan (passive or active, accordingly), and reporting the time that the scan was started and the time each beacon/probe was received (both in terms of TSF of the BSS of the requesting AP). If the request mode is table, this information is optional. In addition, the radio measurement request specifies the channel dwell time for the measurement. In order to use scan for beacon report when the mode is active or passive, add a parameter to scan request that specifies the channel dwell time, and add scan start time and beacon received time to scan results information. Supporting beacon report is required for Multi Band Operation (MBO). Signed-off-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
-
Johannes Berg authored
The API expects a pointer to a signed int so we should not use an unsigned int for it. Signed-off-by: -
Ilan Peer authored
Add radar_detect_widths to the interface combination that allows concurrent P2P Device dedicated interface and AP interfaces, to enable testing of radar detection when P2P Device interface is used. Clear the radar_detect_widths in case of multi channel contexts as this is not currently supported. As radar_detect_widths are now supported in all combinations, remove the hwsim_if_dfs_limits definition since it is no longer needed. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Aviya Erenfeld authored
add API to support VHT MU-MIMO air sniffer. in MU-MIMO there are parallel frames on the air while the HW has only one RX. add the capability to sniff one of the MU-MIMO parallel frames by giving the sniffer additional information so it'll know which of the parallel frames it shall follow. Add attribute - NL80211_ATTR_MU_MIMO_GROUP_DATA - for getting a MU-MIMO groupID in order to monitor packets from that group using VHT MU-MIMO. And add attribute -NL80211_ATTR_MU_MIMO_FOLLOW_ADDR - for passing MAC address to monitor mode. that option will be used by VHT MU-MIMO air sniffer to follow a station according to it's MAC address using VHT MU-MIMO. Signed-off-by:
Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by:
-
Johannes Berg authored
The current implementation of handling ADDBA Request while a session is already active with the peer is wrong - in case the peer is using the existing session's dialog token this should be treated as update to the session, which can update the timeout value. We don't really have a good way of supporting that, so reject, but implement the required behaviour in the spec of "Even if the updated ADDBA Request frame is not accepted, the original Block ACK setup remains active." (802.11-2012 10.5.4) Signed-off-by: -
David Howells authored
The call hash table is now no longer used as calls are looked up directly by channel slot on the connection, so kill it off. Signed-off-by:David Howells <dhowells@redhat.com>
-
David Howells authored
Move to using RCU access to a peer's service connection tree when routing an incoming packet. This is done using a seqlock to trigger retrying of the tree walk if a change happened. Further, we no longer get a ref on the connection looked up in the data_ready handler unless we queue the connection's work item - and then only if the refcount > 0. Note that I'm avoiding the use of a hash table for service connections because each service connection is addressed by a 62-bit number (constructed from epoch and connection ID >> 2) that would allow the client to engage in bucket stuffing, given knowledge of the hash algorithm. Peers, however, are hashed as the network address is less controllable by the client. The total number of peers will also be limited in a future commit. Signed-off-by: -
Paul E. McKenney authored
Data structures that are used both with and without RCU protection are difficult to write in a sparse-clean manner. If you mark the relevant pointers with __rcu, sparse will complain about all non-RCU uses, but if you don't mark those pointers, sparse will complain about all RCU uses. This commit therefore suppresses sparse warnings for rcu_dereference_raw(), allowing mixed-protection data structures to avoid these warnings. Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
David Howells authored
Implement an RCU-safe variant of rb_replace_node() and rearrange rb_replace_node() to do things in the same order. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org>
-
David Howells authored
Move the peer lookup done in input.c by data_ready into rxrpc_find_connection(). Signed-off-by: -
David Howells authored
Prune the contents of the rxrpc_conn_proto struct. Most of the fields aren't used anymore. Signed-off-by: -
David Howells authored
Overhaul the usage count accounting for the rxrpc_connection struct to make it easier to implement RCU access from the data_ready handler. The problem is that currently we're using a lock to prevent the garbage collector from trying to clean up a connection that we're contemplating unidling. We could just stick incoming packets on the connection we find, but we've then got a problem that we may race when dispatching a work item to process it as we need to give that a ref to prevent the rxrpc_connection struct from disappearing in the meantime. Further, incoming packets may get discarded if attached to an rxrpc_connection struct that is going away. Whilst this is not a total disaster - the client will presumably resend - it would delay processing of the call. This would affect the AFS client filesystem's service manager operation. To this end: (1) We now maintain an extra count on the connection usage count whilst it is on the connection list. This mean it is not in use when its refcount is 1. (2) When trying to reuse an old connection, we only increment the refcount if it is greater than 0. If it is 0, we replace it in the tree with a new candidate connection. (3) Two connection flags are added to indicate whether or not a connection is in the local's client connection tree (used by sendmsg) or the peer's service connection tree (used by data_ready). This makes sure that we don't try and remove a connection if it got replaced. The flags are tested under lock with the removal operation to prevent the reaper from killing the rxrpc_connection struct whilst someone else is trying to effect a replacement. This could probably be alleviated by using memory barriers between the flag set/test and the rb_tree ops. The rb_tree op would still need to be under the lock, however. (4) When trying to reap an old connection, we try to flip the usage count from 1 to 0. If it's not 1 at that point, then it must've come back to life temporarily and we ignore it. Signed-off-by: -
David Howells authored
Move the lookup of a peer from a call that's being accepted into the function that creates a new incoming connection. This will allow us to avoid incrementing the peer's usage count in some cases in future. Note that I haven't bother to integrate rxrpc_get_addr_from_skb() with rxrpc_extract_addr_from_skb() as I'm going to delete the former in the very near future. Signed-off-by: -
David Howells authored
Split the service-specific connection code out into into its own file. The client-specific code has already been split out. This will leave just the common code in the original file. Signed-off-by: -
David Howells authored
Split the client-specific connection code out into its own file. It will behave somewhat differently from the service-specific connection code, so it makes sense to separate them. Signed-off-by: -
David Howells authored
Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: -
David Howells authored
The socket's accept queue (socket->acceptq) should be accessed under socket->call_lock, not under the connection lock. Signed-off-by: -
David Howells authored
Add RCU destruction for connections and calls as the RCU lookup from the transport socket data_ready handler is going to come along shortly. Whilst we're at it, move the cleanup workqueue flushing and RCU barrierage into the destruction code for the objects that need it (locals and connections) and add the extra RCU barrier required for connection cleanup. Signed-off-by: -
David Howells authored
When a call is disconnected, clear the call's pointer to the connection and release the associated ref on that connection. This means that the call no longer pins the connection and the connection can be discarded even before the call is. As the code currently stands, the call struct is effectively pinned by userspace until userspace has enacted a recvmsg() to retrieve the final call state as sk_buffs on the receive queue pin the call to which they're related because: (1) The rxrpc_call struct contains the userspace ID that recvmsg() has to include in the control message buffer to indicate which call is being referred to. This ID must remain valid until the terminal packet is completely read and must be invalidated immediately at that point as userspace is entitled to immediately reuse it. (2) The final ACK to the reply to a client call isn't sent until the last data packet is entirely read (it's probably worth altering this in future to be send the ACK as soon as all the data has been received). This change requires a bit of rearrangement to make sure that the call isn't going to try and access the connection again after protocol completion: (1) Delete the error link earlier when we're releasing the call. Possibly network errors should be distributed via connections at the cost of adding in an access to the rxrpc_connection struct. (2) Remove the call from the connection's call tree before disconnecting the call. The call tree needs to be removed anyway and incoming packets delivered by channel pointer instead. (3) The release call event should be considered last after all other events have been processed so that we don't need access to the connection again. (4) Move the channel_lock taking from rxrpc_release_call() to rxrpc_disconnect_call() where it will be required in future. Signed-off-by: -
David Howells authored
If rxrpc_connect_call() fails during the creation of a client connection, there are two bugs that we can hit that need fixing: (1) The call state should be moved to RXRPC_CALL_DEAD before the call cleanup phase is invoked. If not, this can cause an assertion failure later. (2) call->link should be reinitialised after being deleted in rxrpc_new_client_call() - which otherwise leads to a failure later when the call cleanup attempts to delete the link again. Signed-off-by:
-
