- 11 Aug, 2017 1 commit
-
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- 10 Aug, 2017 18 commits
-
-
Xinming Hu authored
This patch check whether userspace beacon data include country ie, if so then download command to enable 11d setup in firmeare accordingly. Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
- 08 Aug, 2017 21 commits
-
-
Michael Skeffington authored
Set RX_FLAG_DECRYPTED in case of MMIC failure so that ieee80211_rx_h_decrypt() doesnt drop the frame before getting to ieee80211_rx_h_michael_mic_verify(). Signed-off-by:
Michael Skeffington <mike@astro.ai> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Bhumika Goyal authored
rate_control_ops structure is only passed as an argument to the function ieee80211_rate_control_{register/unregister}. This argument is of type const, so declare the structure as const. Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Add const to bin_attribute structure as it is only passed to the functions sysfs_{remove/create}_bin_file. The corresponding arguments are of type const, so declare the structure to be const. Signed-off-by: -
Chung-Hsien Hsu authored
After association, ping is not working when sweeping the channel at the AP side. It is caused by having incorrect carrier state (OFF) for the STA in successful roaming. This patch sets the carrier state ON for the case. Signed-off-by:
Chung-Hsien Hsu <stanley.hsu@cypress.com> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Wright Feng authored
When the device/firmware supports multi-channel, it can have P2P connection and regular connection with AP simultaneous. In this case, the num_different_channels in wiphy info was not correct when firmware supports multi-channel (The iw wiphy# info showed "#channels <= 1" in interface combinations). It caused association failed and error message "CTRL-EVENT-FREQ-CONFLICT error" in wpa_supplicant when P2P GO interface was running at the same time. The root cause is that the num_different_channels was always overridden to 1 in brcmf_setup_ifmodes even multi-channel was enabled. We correct the logic by moving num_different_channels setting forward. Signed-off-by:
Wright Feng <wright.feng@cypress.com> Acked-by:
-
Chi-Hsien Lin authored
Add support for CYW4373 SDIO/USB chipset. CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel support. It's a WiFi/BT combo device. Signed-off-by:
Chi-Hsien Lin <chi-hsien.lin@cypress.com> Reviewed-by:
-
Wright Feng authored
When setting wpa_auth to WPA_AUTH_NONE(1) in AP mode with WEP security, firmware will set privacy bit and add WPA OUI in VENDOR IE in beacon and probe response. The security type in softAP beacons confuse the supplicant in client side, and the user client will see [WPA-?] in supplicant scan result. So we set WPA_AUTH_DISABLED in softAP mode with OPEN security. Signed-off-by:
-
Xinming Hu authored
Per below statement about p2p device address in WFA P2P spec $2.4.3: The P2P Device Address of a P2P Device shall be its globally administered MAC address, or its globally administered MAC address with the locally administered bit set. This patch follow above statement, using a separate device address for p2p interface Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Xinming Hu authored
This patch wrapper wps ie in pass through tlv, so that firmware could parse correctly. Signed-off-by:
-
Xinming Hu authored
Commit 4d7ab36f ("mwifiex: Do not change bss_type in change_virtual_intf") kept original bss_type unchanged. bss_num should keep the same style, in this way. Unique tuple (bss_type, bss_num) will be able to locate the right priv structure. Signed-off-by:
-
Ganapathi Bhat authored
Driver is doing netif_carrier_off during suspend, which will set the IFF_LOWER_UP flag to 0. As a result certain applications will think this as a real carrier down and behave accordingly. This will cause issues like loss of IP address, for example. To fix this use netif_device_dettach during suspend. Fixes: 0026b32d ('mwifiex: fix Tx timeout issue during suspend test') Signed-off-by:
-
Karun Eagalapati authored
Provision is added for configuring RTS threshold by sending vap dynamic update frame to firmware. Signed-off-by:
Karun Eagalapati <karun256@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
-
Karun Eagalapati authored
BUFFER_AVAILABLE interrupt is sent by firmware to indicate change in buffer status. We should check buffer status while handling this interrupt. Currently buffer status is checked only while dequeueing packets. This patch fixes a data traffic stuck problem observed occasionally. Signed-off-by:
-
Karun Eagalapati authored
We get buffer full event from firmware whenever Tx queue is full Host should stop writing packets after this and resume after buffer free event. Buffer status checking is optimized for once in 4 times if BUFF_FULL condition is not set, otherwise once for every packet. Signed-off-by:
-
Karun Eagalapati authored
rsi_sdio_check_buffer_status would be the appropriate name for this function as we are checking hardware buffers availability status. Signed-off-by:
-
Karun Eagalapati authored
This patch adds support for U-APSD power save. Configuration frame is downloaded to firmware with default settings and support is advertised to mac80211 Signed-off-by:
-
Karun Eagalapati authored
This patch adds support for legacy power save. Necessary configuration frames are downloaded to firmware when power save is enabled/disabled Signed-off-by:
-
Pavani Muthyala authored
TX command frame set_antenna is modified to use common descriptor structure. Also it's subframe type is set. Signed-off-by:
Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by:
-
Pavani Muthyala authored
This patch implements rfkill_poll handler. Also, necessary changes are done in interface up and down handler to support rfkill functionality. Signed-off-by:
-
Prameela Rani Garnepudi authored
This patch fixes the uninitialized descriptor pointer issue in function rsi_send_internal_mgmt_frame(). Descriptor should point to start of the skb data. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 9a629faf ("rsi: immediate wakeup bit and priority for TX command packets") Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
-
Vincent Legoll authored
No need to get into the submenu to disable all BCMA-related config entries. Signed-off-by:
Vincent Legoll <vincent.legoll@gmail.com> Signed-off-by:
-
