- 09 Jan, 2012 40 commits
-
-
Artem Bityutskiy authored
Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Artem Bityutskiy authored
Signed-off-by:
-
Artem Bityutskiy authored
Signed-off-by:
-
Artem Bityutskiy authored
Signed-off-by:
-
Artem Bityutskiy authored
Signed-off-by:
-
Artem Bityutskiy authored
Signed-off-by:
-
Artem Bityutskiy authored
Signed-off-by:
-
Artem Bityutskiy authored
Signed-off-by:
-
Artem Bityutskiy authored
Signed-off-by:
-
Artem Bityutskiy authored
This patch is part of a patch-set which changes the MTD interface from 'mtd->func()' form to 'mtd_func()' form. We need this because we want to add common code to to all drivers in the mtd core level, which is impossible with the current interface when MTD clients call driver functions like 'read()' or 'write()' directly. At this point we just introduce a new inline wrapper function, but later some of them are expected to gain more code. E.g., the input parameters check should be moved to the wrappers rather than be duplicated at many drivers. This particular patch introduced the 'mtd_erase()' interface. The following patches add all the other interfaces one by one. Signed-off-by:
-
Artem Bityutskiy authored
We are going to re-work the MTD interface and change 'mtd->write()' to 'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions in the 'struct mtd_info' structure. However, mtdchar.c has its own 'mtd_read()', 'mtd_write()', etc functions which collide with our changes. This patch renames these functions to 'mtdchar_read()', 'mtdchar_write()', etc. Additionally, to make the 'mtdchar.c' file look consistent, rename similarly all the other functions starting with 'mtd_'. Signed-off-by:
-
Artem Bityutskiy authored
We are going to re-work the MTD interface and change 'mtd->write()' to 'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions in the 'struct mtd_info' structure. However, logfs has its own 'mtd_read()', 'mtd_write()', etc functions which collide with our changes. This patch renames these logfs functions to 'logfs_mtd_read()', 'logfs_mtd_write()', etc. Additionally, to make the 'fs/logfs/dev_mtd.c' file look consistent, rename similarly all the other functions starting with 'mtd_'. Cc: Jörn Engel <joern@logfs.org> Signed-off-by:
-
Artem Bityutskiy authored
We allocate the "mtd" structure using kzalloc which means we do not have to initialize unused MTD function pointers to NULL, since it is safe to assume in Linux that NULL contains all zeroes. Signed-off-by:
-
Artem Bityutskiy authored
This patch fixes the following build failure: In file included from include/linux/mtd/qinfo.h:4:0, from include/linux/mtd/pfow.h:7, from drivers/mtd/lpddr/lpddr_cmds.c:27: include/linux/mtd/map.h: In function 'inline_map_read': include/linux/mtd/map.h:409:3: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration] Signed-off-by: -
Julia Lawall authored
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@intel.com> Signed-off-by:
-
Julia Lawall authored
Data allocated with devm_ioremap or devm_ioremap_nocache should not be freed using iounmap, because doing so causes a dangling pointer, and a subsequent double free. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression x; @@ ( x = devm_ioremap(...) | x = devm_ioremap_nocache(...) ) @@ expression r.x; @@ * iounmap(x) // </smpl> Signed-off-by:
-
Jamie Iles authored
Add device tree bindings so that the gpio-nand driver may be instantiated from the device tree. This also allows the partitions to be specified in the device tree. v7: - restore runtime device tree/non device tree detection v6: - convert to mtd_device_parse_register() v5: - fold dt config helpers into a single gpio_nand_of_get_config() v4: - get io sync address from gpio-control-nand,io-sync-reg property rather than a resource - clarified a few details in the binding v3: - remove redundant cast and a couple of whitespace/naming changes v2: - add CONFIG_OF guards for non-dt platforms - compatible becomes gpio-control-nand - clarify some binding details Signed-off-by:
Jamie Iles <jamie@jamieiles.com> Signed-off-by:
-
Jonas Gorski authored
Only use the values from the image tag if it is valid. Always create the CFE, NVRAM and linux partitions, to allow flashing a new image even if the old is invalid without overwriting CFE or NVRAM. Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by:
-
Jonas Gorski authored
All CRC32 fields are 32 bit integers, so define them as such to prevent unnecessary casts if we want to use them. Signed-off-by:
-
Jonas Gorski authored
Instead of referencing the sizes of fixed partitions, use the precomputed CFE/NVRAM lengths. Signed-off-by:
-
Jonas Gorski authored
The CFE boot loader on BCM63XX platforms assumes itself and the NVRAM partition to be 64 KiB (or erase block sized, if larger). Ensure this assumption is also met when creating the partitions to prevent accidential erasure of CFE or NVRAM. Signed-off-by:
-
Jonas Gorski authored
Recent CFEs do not contain the CFE1CFE1 magic anymore, so check for the "cfe-v" version marker string instead. As very old CFEs do not have this string, leave the CFE1CFE1 magic as a fallback for detection. Signed-off-by:
-
Rusty Russell authored
You didn't mean this to be a bool. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Robert Jarzmik authored
As the MTD api has no use for the number of erase cycles each block has endured, remove the function which calculated that value. If one day MTD api finds it usefull for wear levelling algorithms to have this information, the function should be put back in place. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Shengzhou Liu authored
- fix NAND_CMD_READID command for ONFI detect. - add NAND_CMD_PARAM command to read the ONFI parameter page. Signed-off-by:
Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by:
-
Shengzhou Liu authored
There was a bug for fmr initialization, which lead to fmr was always 0x100 in fsl_elbc_chip_init() and caused FCM command timeout before calling fsl_elbc_chip_init_tail(), now we initialize CWTO to maximum timeout value and not relying on the setting of bootloader. Signed-off-by:
-
Artem Bityutskiy authored
Signed-off-by:
-
Liu Shuo authored
If we use the Nand flash chip whose number of pages in a block is greater than 64(for large page), we must treat the low bit of FBAR as being the high bit of the page address due to the limitation of FCM, it simply uses the low 6-bits (for large page) of the combined block/page address as the FPAR component, rather than considering the actual block size. Signed-off-by:
Liu Shuo <b35362@freescale.com> Signed-off-by:
Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by:
Tang Yuantian <b29983@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Acked-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Roman Tereshonkov authored
The array of unsigned long pointed by oops_page_used is allocated by vmalloc which requires the size to be in bytes. BITS_PER_LONG is equal to 32. If we want to allocate memory for 32 pages with one bit per page then 32 / BITS_PER_LONG is equal to 1 byte that is 8 bits. To fix it we need to multiply the result by sizeof(unsigned long) equal to 4. Cc: stable@kernel.org Signed-off-by:
Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by:
-
Eric Sandeen authored
after 250df6ed (fs: protect inode->i_state with inode->i_lock), insert_inode_locked() no longer returns the inode with I_NEW set on failure. However, the error handler still calls unlock_new_inode() on failure, which does a WARN_ON if I_NEW is not set, so any failure spews a lot of warnings. We can just drop the unlock_new_inode() if insert_inode_locked() fails here. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Jonas Gorski authored
bcm963xx-flash does nothing meaningful anymore. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Jonas Gorski authored
Signed-off-by:
-
Jonas Gorski authored
Arch setup code might want to use their own partition parsers, but still use the generic physmap flash driver. Signed-off-by:
-
Jonas Gorski authored
Recent BCM63XX devices support a variety of flash types (parallel, SPI, NAND) and share the partition layout. To prevent code duplication make the CFE partition parsing code a stand alone mtd parser to allow SPI or NAND flash drivers to use it. Signed-off-by:
-
Jonas Gorski authored
Replace raw printk's with their pr_XXX equivalent and unify broken up strings so they become grepable. Also replace the PFX definition with a pr_fmt(). Signed-off-by:
-
Jonas Gorski authored
Signed-off-by:
-
Jonas Gorski authored
Signed-off-by:
-
Heiko Schocher authored
Signed-off-by:
Heiko Schocher <hs@denx.de> Signed-off-by:
-
Liu Shuo authored
When we do a non-full-page write, the length be set to FBCR should not be 'elbc_fcm_ctrl->index', it should be 'elbc_fcm_ctrl->index - elbc_fcm_ctrl->column'. Signed-off-by:
-
Liu Shuo authored
On both of large-page chip and small-page chip, we always should use 'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't use a overflowed 'column' to set it. Signed-off-by:
-
