- 23 Apr, 2013 35 commits
-
-
Arend van Spriel authored
In brcmf_fws_init() the error flows were not properly handled and the caller ignored the return value. The only action that is allowed to fail in brcmf_fws_init() is setting the tlv in firmware as the feature is not supported on all devices. Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
When firmware signals the driver to remove a destination entry it may have sk_buff packets queued for it. These should be freed. Reviewed-by:
-
Piotr Haber authored
Adds support for the critical protocol API provided by nl80211 which gives Wifi traffic priority over a Bluetooth (e)SCO connection and disables scanning during DCHP negotiation. Reviewed-by:
Piotr Haber <phaber@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
During the DHCP protocol exchange it is benificial to suppress scan requests which may decrease time to complete DHCP protocol. Reviewed-by:
-
Sujith Manoharan authored
After the commit "ath9k: improve dma map failure handling", the wrong buffer was DMA-unmapped, introducing warnings like the one below. This patch fixes the issue. WARNING: at /home/sujith/dev/wireless-testing/lib/dma-debug.c:986 check_sync+0x4bc/0x580() Hardware name: LIFEBOOK AH531 ath9k 0000:02:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x00000000d9012800] [size=48 bytes] Pid: 86, comm: kworker/u:5 Tainted: G W O 3.9.0-rc8-wl-debug #106 Call Trace: [<ffffffff810410c0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8104113c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8125432c>] check_sync+0x4bc/0x580 [<ffffffff8109e5f7>] ? trace_hardirqs_on_caller+0xa7/0x190 [<ffffffff8109e6ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81254488>] debug_dma_sync_single_for_device+0x48/0x50 [<ffffffffa0a53825>] ? ath9k_iowrite32+0x35/0x90 [ath9k] [<ffffffff812512f0>] ? swiotlb_tbl_sync_single+0x50/0x90 [<ffffffff81251350>] ? swiotlb_sync_single+0x20/0x30 [<ffffffff8125137f>] ? swiotlb_sync_single_for_device+0xf/0x20 [<ffffffffa0a58baf>] ath_rx_edma_buf_link+0xef/0x140 [ath9k] [<ffffffffa0a58c4e>] ath_rx_addbuffer_edma+0x4e/0x90 [ath9k] [<ffffffffa0a59c51>] ath_startrecv+0xf1/0x120 [ath9k] [<ffffffffa0a550e0>] ath_complete_reset+0x20/0x130 [ath9k] [<ffffffffa0a5790d>] ath_reset_internal+0x10d/0x210 [ath9k] [<ffffffffa0a5878c>] ath9k_config+0x47c/0x7b0 [ath9k] [<ffffffffa06d4978>] ieee80211_hw_config+0x88/0x3f0 [mac80211] [<ffffffffa06d4a3f>] ? ieee80211_hw_config+0x14f/0x3f0 [mac80211] [<ffffffffa06dbed1>] __ieee80211_scan_completed+0xc1/0x440 [mac80211] [<ffffffffa06dd002>] ieee80211_scan_work+0x82/0x440 [mac80211] [<ffffffff810606a3>] process_one_work+0x1e3/0x530 [<ffffffff81060641>] ? process_one_work+0x181/0x530 [<ffffffff8106163f>] worker_thread+0x10f/0x3c0 [<ffffffff81061530>] ? manage_workers+0x330/0x330 [<ffffffff810665da>] kthread+0xea/0xf0 [<ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8146085c>] ret_from_fork+0x7c/0xb0 [<ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140 Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Sujith Manoharan authored
The RX fifo can be accessed from the common tasklet or it can be reaped/cleaned when RX is stopped, which is done when doing a reset or channel change - this happens in process context. Since it is ensured that there are no pending tasklets when stopping RX and cleaning the FIFO, there is no need to use SKB queue functions which take internal locks. Signed-off-by:
-
Sujith Manoharan authored
The EDMA case is handled first, so the else condition can be removed. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
The split makes no sense and merging the functions makes further changes easier to implement Signed-off-by:
-
Han Shen authored
GCC 4.8 is spitting out uninitialized-variable warnings against "drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c". This patch adds initialization to the variable and properly sets its value. Signed-off-by: Han Shen (shenhan@google.com) Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Mathias Kretschmer authored
According to 802.11-2007 17.3.8.6 (slot time), the slot time should be increased by 3 us * coverage class. The code only increased the ack timeout, which is fixed by this patch. We have noticed in our long shot scenario that we see less collisions with this patch. Signed-off-by:
Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [add standard reference and commit message] Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
-
Rafał Miłecki authored
All radio ops are 16b (there is only 1 exception for reg 0x1), so we deprecated b43_radio_read16 and b43_radio_write16 long time ago. Signed-off-by:Rafał Miłecki <zajec5@gmail.com>
-
Rafał Miłecki authored
Sort defines, use one macro for all revs, support for 5GHz when uploading antenna table. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Also make a function name shorter so we can easily fit 80 chars. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Thanks to Broadcom releasing some code we can use better names. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
In MMIO dumps of ndiswrapper there are following PHY ops: phy_read(0x0118) -> 0x013d phy_read(0x01ed) -> 0x993d phy_read(0x0119) -> 0x012f phy_read(0x01ee) -> 0x992f phy_read(0x011a) -> 0x0139 phy_read(0x0969) -> 0x9939 It matches the code of wlc_phy_txpower_est_power_nphy (from brcm80211), so we know the registers meaning. Signed-off-by: -
Rafał Miłecki authored
After b43_phy_ht_tx_power_ctl_setup there are some extra radio ops: radio_read(0x08bf) -> 0x0001 radio_write(0x08bf) <- 0x0001 radio_write(0x0159) <- 0x0011 On N-PHY we write 0x11 to TSSI regs, so it's probably sth similar. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Now when we know many radio regs at 0x000 are core-generic, I've noticed we duplicate some values in the tables. Signed-off-by: -
Rafał Miłecki authored
After comparing writes to registers at 0x000, 0x400 and 0x800 it seems there are many very similar writes. So 0x000 offset is not for accessing something totally different, but probably just the first out of three cores. Signed-off-by:
-
- 22 Apr, 2013 5 commits
-
-
Bing Zhao authored
Initialization of bss_descriptor is unnecessary as the entire structure will be overwritten by a memcpy followed by. Initialize disable_11ac flag properly by setting it to true in mwifiex_fill_new_bss_desc(). Reported-by:
Doug Anderson <dianders@chromium.org> Reviewed-by:
Paul Stewart <pstew@chromium.org> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
-
Bing Zhao authored
beacon_ie buffer is allocated in mwifiex_fill_new_bss_desc() and the buffer pointer is saved in bss_desc->beacon_buf. beacon_ie is freed before the function returns. However, bss_desc->beacon_buf is still being accessed afterwards. Fix it by freeing beacon_ie (bss_desc->beacon_buf) in caller's scope. Reviewed-by:
-
Bing Zhao authored
We have blocked association attempts on interfaces configured in AP and AD-HOC modes. P2P mode should be blocked too. Furthermore, an error code must be returned if we are unable to associate. Signed-off-by:
-
Bing Zhao authored
Use msecs_to_jiffies() wherever possible. Signed-off-by:
-
Bing Zhao authored
priv->bss_mode uses NL80211_IFTYPE_* definitions. HostCmd_BSS_MODE_IBSS is used in ad-hoc start/join command between driver and firmware. Coincidentally both HostCmd_BSS_MODE_IBSS and NL80211_IFTYPE_STATION are defined as 2. That explains why nobody complained. Signed-off-by:
-
