- 23 Aug, 2016 1 commit
-
-
Maarten Lankhorst authored
No idea if it supports it, but this is the minimum required from get_dpll. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 22 Aug, 2016 20 commits
-
-
Chris Wilson authored
As we do many register reads within a very short period of time, hold the GMBUS powerwell from start to finish. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160819164503.17845-1-chris@chris-wilson.co.ukReviewed-by:
David Weinehall <david.weinehall@linux.intel.com>
-
Chris Wilson authored
An unlikely ABBA deadlock in debugfs that no one has reported. [ 284.922349] ====================================================== [ 284.922355] [ INFO: possible circular locking dependency detected ] [ 284.922361] 4.8.0-rc2+ #430 Tainted: G W [ 284.922366] ------------------------------------------------------- [ 284.922371] cat/1197 is trying to acquire lock: [ 284.922376] (&dev->filelist_mutex){+.+...}, at: [<ffffffffa0055ba2>] i915_ppgtt_info+0x82/0x390 [i915] [ 284.922423] [ 284.922423] but task is already holding lock: [ 284.922429] (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0055b55>] i915_ppgtt_info+0x35/0x390 [i915] [ 284.922465] [ 284.922465] which lock already depends on the new lock. [ 284.922465] [ 284.922471] [ 284.922471] the existing dependency chain (in reverse order) is: [ 284.922477] -> #1 (&dev->struct_mutex){+.+.+.}: [ 284.922493] [<ffffffff81087710>] lock_acquire+0x60/0x80 [ 284.922505] [<ffffffff8143e96f>] mutex_lock_nested+0x5f/0x360 [ 284.922520] [<ffffffffa004f877>] print_context_stats+0x37/0xf0 [i915] [ 284.922549] [<ffffffffa00535f5>] i915_gem_object_info+0x265/0x490 [i915] [ 284.922581] [<ffffffff81144491>] seq_read+0xe1/0x3b0 [ 284.922592] [<ffffffff811f77b3>] full_proxy_read+0x83/0xb0 [ 284.922604] [<ffffffff8111ba03>] __vfs_read+0x23/0x110 [ 284.922616] [<ffffffff8111c9b9>] vfs_read+0x89/0x110 [ 284.922626] [<ffffffff8111dbf4>] SyS_read+0x44/0xa0 [ 284.922636] [<ffffffff81442be9>] entry_SYSCALL_64_fastpath+0x1c/0xac [ 284.922648] -> #0 (&dev->filelist_mutex){+.+...}: [ 284.922667] [<ffffffff810871fc>] __lock_acquire+0x10fc/0x1270 [ 284.922678] [<ffffffff81087710>] lock_acquire+0x60/0x80 [ 284.922689] [<ffffffff8143e96f>] mutex_lock_nested+0x5f/0x360 [ 284.922701] [<ffffffffa0055ba2>] i915_ppgtt_info+0x82/0x390 [i915] [ 284.922729] [<ffffffff81144491>] seq_read+0xe1/0x3b0 [ 284.922739] [<ffffffff811f77b3>] full_proxy_read+0x83/0xb0 [ 284.922750] [<ffffffff8111ba03>] __vfs_read+0x23/0x110 [ 284.922761] [<ffffffff8111c9b9>] vfs_read+0x89/0x110 [ 284.922771] [<ffffffff8111dbf4>] SyS_read+0x44/0xa0 [ 284.922781] [<ffffffff81442be9>] entry_SYSCALL_64_fastpath+0x1c/0xac [ 284.922793] [ 284.922793] other info that might help us debug this: [ 284.922793] [ 284.922809] Possible unsafe locking scenario: [ 284.922809] [ 284.922818] CPU0 CPU1 [ 284.922825] ---- ---- [ 284.922831] lock(&dev->struct_mutex); [ 284.922842] lock(&dev->filelist_mutex); [ 284.922854] lock(&dev->struct_mutex); [ 284.922865] lock(&dev->filelist_mutex); [ 284.922875] [ 284.922875] *** DEADLOCK *** [ 284.922875] [ 284.922888] 3 locks held by cat/1197: [ 284.922895] #0: (debugfs_srcu){......}, at: [<ffffffff811f7730>] full_proxy_read+0x0/0xb0 [ 284.922919] #1: (&p->lock){+.+.+.}, at: [<ffffffff811443e8>] seq_read+0x38/0x3b0 [ 284.922942] #2: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0055b55>] i915_ppgtt_info+0x35/0x390 [i915] [ 284.922983] Fixes: 1d2ac403 ("drm: Protect dev->filelist with its own mutex") Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160822132820.21725-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If the engine isn't being retired (worker starvation?) then it is possible for us to repeatedly observe that between consecutive hangchecks the seqno on the ring to be the same and there remain unretired requests. Ignore these completely and only regard the engine as busy for the purpose of hang detection (not stall detection) if there are outstanding breadcrumbs. In recent history we have looked at using both the request and seqno as indication of activity on the engine, but that was reduced to just inspecting seqno in commit cffa781e ("drm/i915: Simplify check for idleness in hangcheck"). However, in commit dcff85c8 ("drm/i915: Enable i915_gem_wait_for_idle() without holding struct_mutex"), I made the decision to use the new common lockless function, under the assumption that request retirement was more frequent than hangcheck and so we would not have a stuck busy check. The flaw there was in forgetting that we accumulate the hang score, and so successive checks seeing a stuck request, albeit with the GPU advancing elsewhere and so not necessary the same stuck request, would eventually trigger the hang. Fixes: dcff85c8 ("drm/i915: Enable i915_gem_wait_for_idle()...") Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Chris Wilson authored
As we never need to directly access the pages we allocate for scratch and the pagetables, and always remap them into the GTT through the dma remapper, we do not need to limit the allocations to lowmem i.e. we can pass in the __GFP_HIGHMEM flag to the page allocation. For backwards compatibility, e.g. certain old GPUs not liking highmem for certain functions that may be accidentally mapped to the scratch page by userspace, keep the GMCH probe as only allocating from DMA32. Signed-off-by:
-
Chris Wilson authored
As the scratch page is no longer shared between all VM, and each has their own, forgo the small allocation and simply embed the scratch page struct into the i915_address_space. Signed-off-by:
-
David Weinehall authored
Just like with sysfs, we do some major overhaul. Pass dev_priv instead of dev to all feature macros (IS_, HAS_, INTEL_, etc.). This has the side effect that a bunch of functions now get dev_priv passed instead of dev. All calls to INTEL_INFO()->gen have been replaced with INTEL_GEN(). We want access to to_i915(node->minor->dev) in a lot of places, so add the node_to_i915() helper to accommodate for this. Finally, we have quite a few cases where we get a void * pointer, and need to cast it to drm_device *, only to run to_i915() on it. Add cast_to_i915() to do this. v2: Don't introduce extra dev (Chris) v3: Make pipe_crc_info have a pointer to drm_i915_private instead of drm_device. This saves a bit of space, since we never use drm_device anywhere in these functions. Also some minor fixup that I missed in the previous version. v4: Changed the code a bit so that dev_priv is passed directly to various functions, thus removing the need for the cast_to_i915() helper. Also did some additional cleanup. v5: Additional cleanup of newly introduced changes. v6: Rebase again because of conflict. Signed-off-by: -
David Weinehall authored
In an effort to simplify things for a future push of dev_priv instead of dev wherever possible, always take pdev via dev_priv where feasible, eliminating the direct access from dev. Right now this only eliminates a few cases of dev, but it also obviates that we pass dev into a lot of functions where dev_priv would be the more obvious choice. v2: Fixed one more place missing in the previous patch set Signed-off-by:
-
David Weinehall authored
Various cleanup for i915_sysfs.c; we now use dev_priv whenever possible. The kdev_to_drm_minor() helper function has been replaced by one that converts from struct device * to struct drm_i915_private *. We already have a seemingly identical helper (kdev_to_i915()) in i915_drv.h. But that one cannot be used here. Unlike the version in i915_drv.h, this helper reaches i915 through drm_minor. v2: Rename kdev_to_i915_dm() to kdev_minor_to_i915() (Chris) Signed-off-by:
-
David Weinehall authored
We currently have a mix of struct device *device, struct device *kdev, and struct device *dev (the latter forcing us to refer to struct drm_device as something else than the normal dev). To simplify things, always use kdev when referring to struct device. v2: Replace the dev_to_drm_minor() macro with the inline function kdev_to_drm_minor(). Signed-off-by: -
David Weinehall authored
Fix minor whitespace issues plus a typo. Signed-off-by:
-
Maarten Lankhorst authored
Merge commit 5e580523 reverts the version bumping parts of commit 4aa7fb9c. Bump the versions again and request the specific firmware version. The currently recommended versions are: SKL 1.26, KBL 1.01 and BXT 1.07. Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97242 Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 5e580523 ("Backmerge tag 'v4.7' into drm-next") Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Lyude authored
If we're enabling a pipe, we'll need to modify the watermarks on all active planes. Since those planes won't be added to the state on their own, we need to add them ourselves. Signed-off-by:
Lyude <cpaul@redhat.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Matt Roper authored
When we write watermark values to the hardware, those values are stored in dev_priv->wm.skl_hw. However with recent watermark changes, the results structure we're copying from only contains valid watermark and DDB values for the pipes that are actually changing; the values for other pipes remain 0. Thus a blind copy of the entire skl_wm_values structure will clobber the values for unchanged pipes...we need to be more selective and only copy over the values for the changing pipes. This mistake was hidden until recently due to another bug that caused us to erroneously re-calculate watermarks for all active pipes rather than changing pipes. Only when that bug was fixed was the impact of this bug discovered (e.g., modesets failing with "Requested display configuration exceeds system watermark limitations" messages and leaving watermarks non-functional, even ones initiated by intel_fbdev_restore_mode). Changes since v1: - Add a function for copying a pipe's wm values (skl_copy_wm_for_pipe()) so we can reuse this later Fixes: 734fa01f ("drm/i915/gen9: Calculate watermarks during atomic 'check' (v2)") Fixes: 9b613022 ("drm/i915/gen9: Re-allocate DDB only for changed pipes") Signed-off-by:
-
Lyude authored
Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by:
-
Lyude authored
In order to add proper support for the SAGV, we need to be able to know what the cause of a failure to change the SAGV through the pcode mailbox was. The reasoning for this is that some very early pre-release Skylake machines don't actually allow you to control the SAGV on them, and indicate an invalid mailbox command was sent. This also might come in handy in the future for debugging. Changes since v1: - Add functions for interpreting gen6 mailbox error codes along with gen7+ error codes, and actually interpret those codes properly - Renamed patch to reflect new behavior Signed-off-by:
-
Paulo Zanoni authored
intel_fbc_pre_update() depends upon the new state being already pinned in place in the Global GTT (primarily for both fencing which wants both an offset and a fence register, if assigned). This requires the call to intel_fbc_pre_update() be after intel_pin_and_fence_fb() - but commit e8216e50 ("drm/i915/fbc: call intel_fbc_pre_update earlier during page flips") moved the code way too much up in its attempt to call it before the page flip. v2 (from Paulo): - Point the original bad commit. - Add a comment to maybe prevent further regressions. Fixes: e8216e50 ("drm/i915/fbc: call intel_fbc_pre_update earlier...") Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by:
-
Daniel Vetter authored
This issue here is (I think) purely theoretical, since a compiler would need to be especially foolish to recompute the value of i915_gem_request_completed right after it was already used. Hence the additional barrier() is also not really a restriction. But I believe this to be at least permissible, and since our rcu trickery is a beast it's worth to annotate all the corner cases. Chris proposed to instead just wrap a READ_ONCE around request->fence.seqno in i915_gem_request_completed. But that has a measurable impact on code size, and everywhere we hold a full reference to the underlying request it's also not needed. And personally I'd like to have just enough barriers and locking needed for correctness, but not more - it makes it much easier in the future to understand what's going on. Since the busy ioctl has now fully embraced it's races there's no point annotating it there too. We really only need it in active_get_rcu, since that function _must_ deliver a correct snapshot of the active fences (and not chase something else). v2: Polish the comment a bit more (Chris). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Chris Wilson authored
Since by design, if not entirely by practice, nothing is allowed to access the scratch page we use to background fill the VM, then we do not need to ensure that it is coherent between the CPU and GPU. set_pages_uc() does a stop_machine() after changing the PAT, and that significantly impacts upon context creation throughput. Signed-off-by:
-
Chris Wilson authored
The passed in flag that distinguishes i915_gem_pin_display from i915_gem_gtt is from node->info_ent->data not the data function parameter. Fixes: 6da84829 ("drm/i915: Focus debugfs/i915_gem_pinned to show...") Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:
-
- 19 Aug, 2016 7 commits
-
-
Chris Wilson authored
Very old numbers indicate this is a 66% improvement when remapping the entire object for fence contention - due to the elimination of track_pfn_insert and its strcmp. Signed-off-by:
-
Chris Wilson authored
As io_mapping.h now always allocates the struct, we can avoid that allocation and extra pointer dance by embedding the struct inside drm_i915_private Signed-off-by:
-
Chris Wilson authored
Currently, we only allocate a structure to hold metadata if we need to allocate an ioremap for every access, such as on x86-32. However, it would be useful to store basic information about the io-mapping, such as its page protection, on all platforms. Signed-off-by:
-
Chris Wilson authored
Only fbc1 is tied to using a fence. Later iterations of fbc are more flexible and allow operation on unfenced frontbuffers. Signed-off-by:
-
Chris Wilson authored
If the frontbuffer doesn't have an associated fence, it will have a fence reg of -1. If we attempt to OR in this register into the FBC control register we end up setting all control bits, oops! Signed-off-by:
-
Chris Wilson authored
What I never hit in testing, but Mika immediately did, was a GPU hang with a pending fence release (where a tiled object has been changed by the user to be untiled, and the update has not yet been committed to the fence register). As the stride/tiling is 0, this causes a divide-by-zero error when trying to write the new fence parameters: [ 28.784518] drm/i915: Resetting chip after gpu hang [ 28.784551] divide error: 0000 [#1] PREEMPT SMP [ 28.784565] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat mxm_wmi x86_pkg_temp_thermal snd_hda_codec_hdmi kvm irqbypass snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec serio_raw snd_hwdep snd_hda_core snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore mac_hid wmi efivarfs autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid0 multipath linear psmouse e1000e ptp pps_core nvme nvme_core i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm video [ 28.784738] CPU: 0 PID: 1692 Comm: kworker/0:2 Not tainted 4.8.0-rc2+ #895 [ 28.784752] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 1803 05/09/2016 [ 28.784786] Workqueue: events_long i915_hangcheck_elapsed [i915] [ 28.784814] task: ffff923c18f59d40 task.stack: ffff923c1b7e4000 [ 28.784827] RIP: 0010:[<ffffffffc0475b5f>] [<ffffffffc0475b5f>] fence_write+0x9f/0x3b0 [i915] [ 28.784854] RSP: 0018:ffff923c1b7e7b30 EFLAGS: 00010246 [ 28.784866] RAX: 00000000008ca000 RBX: ffff923c18540000 RCX: 0000000000000020 [ 28.784880] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000596d000 [ 28.784894] RBP: ffff923c1b7e7b68 R08: 0000000000000000 R09: 0000000000000000 [ 28.784908] R10: 0000000000000000 R11: 00000000008ca000 R12: ffff923c1ef9d600 [ 28.784921] R13: 0000000000100040 R14: 0000000000100044 R15: ffff923c18549908 [ 28.784935] FS: 0000000000000000(0000) GS:ffff923c36c00000(0000) knlGS:0000000000000000 [ 28.784951] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.784962] CR2: 00007f193373c893 CR3: 0000000419c78000 CR4: 00000000003406f0 [ 28.784976] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 28.784990] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 28.785004] Stack: [ 28.785009] 000000000596c03b ffff923c1b7e7b68 ffff923c18549938 0000000000000009 [ 28.785026] ffff923c18540000 ffff923c18549280 ffff923c18547ce8 ffff923c1b7e7b90 [ 28.785044] ffffffffc04761f9 ffff923c18540000 ffff923c18547d00 ffff923c18548ff8 [ 28.785062] Call Trace: [ 28.785078] [<ffffffffc04761f9>] i915_gem_restore_fences+0x39/0x50 [i915] [ 28.785102] [<ffffffffc047fe89>] i915_gem_reset+0x179/0x300 [i915] Reported-by:
-
Dave Gordon authored
In the recent patch bc3d6744 drm/i915: Allow userspace to request no-error-capture upon ... the final version moved the flags and the associated #defines around so they were adjacent; unfortunately, they ended up between a comment and the thing (hw_id) to which the comment applies :( So this patch reshuffles the comment and subject back together. Also, as we're touching 'hw_id', let's change it from just 'unsigned' to a fully-specified 'unsigned int', because some code checking tools (including checkpatch) object to plain 'unsigned'. Fixes: bc3d6744 ("drm/i915: Allow userspace to request no-error-capture...") Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1471616622-6919-1-git-send-email-david.s.gordon@intel.comReviewed-by:
-
- 18 Aug, 2016 12 commits
-
-
Chris Wilson authored
If we need to use clflush to prepare our batch for reads from memory, we can bypass the cache instead by using non-temporal copies. Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-39-chris@chris-wilson.co.uk
-
Chris Wilson authored
A significant proportion of the cmdparsing time for some batches is the cost to find the register in the mmiotable. We ensure that those tables are in ascending order such that we could do a binary search if it was ever merited. It is. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-38-chris@chris-wilson.co.uk
-
Chris Wilson authored
If the command descriptor says to skip it, ignore checking for anyother other conflict. Signed-off-by:
-
Chris Wilson authored
On the blitter (and in test code), we see long sequences of repeated commands, e.g. XY_PIXEL_BLT, XY_SCANLINE_BLT, or XY_SRC_COPY. For these, we can skip the hashtable lookup by remembering the previous command descriptor and doing a straightforward compare of the command header. The corollary is that we need to do one extra comparison before lookup up new commands. v2: Less magic mask (ok, it is still magic, but now you cannot see!) Signed-off-by:
-
Chris Wilson authored
The existing code's hashfunction is very suboptimal (most 3D commands use the same bucket degrading the hash to a long list). The code even acknowledge that the issue was known and the fix simple: /* * If we attempt to generate a perfect hash, we should be able to look at bits * 31:29 of a command from a batch buffer and use the full mask for that * client. The existing INSTR_CLIENT_MASK/SHIFT defines can be used for this. */ Signed-off-by:
-
Chris Wilson authored
For simplicity, we want to continue using a contiguous mapping of the command buffer, but we can reduce the number of vmappings we hold by switching over to a page-by-page copy from the user batch buffer to the shadow. The cost for saving one linear mapping is about 5% in trivial workloads - which is more or less the overhead in calling kmap_atomic(). Signed-off-by:
-
Chris Wilson authored
The single largest factor in the overhead of parsing the commands is the setup of the virtual mapping to provide a continuous block for the batch buffer. If we keep those vmappings around (against the better judgement of mm/vmalloc.c, which we offset by handwaving and looking suggestively at the shrinker) we can dramatically improve the performance of the parser for small batches (such as media workloads). Furthermore, we can use the prepare shmem read/write functions to determine how best we need to clflush the range (rather than every page of the object). The impact of caching both src/dst vmaps is +80% on ivb and +140% on byt for the throughput on small batches. (Caching just the dst vmap and iterating over the src, doing a page by page copy is roughly 5% slower on both platforms. That may be an acceptable trade-off to eliminate one cached vmapping, and we may be able to reduce the per-page copying overhead further.) For *this* simple test case, the cmdparser is now within a factor of 2 of ideal performance. Signed-off-by:
-
Chris Wilson authored
Since I have been using the BCS_TIMESTAMP to measure latency of execution upon the blitter ring, allow regular userspace to also read from that register. They are already allowed RCS_TIMESTAMP! Signed-off-by:
-
Chris Wilson authored
If the developer adds a register in the wrong order, we BUG during boot. That makes development and testing very difficult. Let's be a bit more friendly and disable the command parser with a big warning if the tables are invalid. Signed-off-by:
-
Chris Wilson authored
Since commit 43566ded ("drm/i915: Broaden application of set-domain(GTT)") we allowed objects to be in the GTT domain, but unbound. Therefore removing the GTT cache domain when removing the GGTT vma is no longer semantically correct. An unfortunate side-effect is we lose the wondrously named i915_gem_object_finish_gtt(), not to be confused with i915_gem_gtt_finish_object()! Signed-off-by:
-
Chris Wilson authored
We track the LRU access for eviction and bump the last access for the user GGTT on set-to-gtt. When we do so we need to not only bump the primary GGTT VMA but all partials as well. Similarly we want to bump the last access tracking for when unpinning an object from the scanout so that they do not get promptly evicted and hopefully remain available for reuse on the next frame. Signed-off-by:
-
Chris Wilson authored
When using the aliasing ppgtt and pageflipping with the shrinker/eviction active, we note that we often have to rebind the backbuffer before flipping onto the scanout because it has an invalid alignment. If we store the worst-case alignment required for a VMA, we can avoid having to rebind at critical junctures. Signed-off-by:
-
