- 17 Jan, 2015 7 commits
-
-
Lendacky, Thomas authored
Since the Tx ring cleanup can run at the same time that data is being transmitted, a spin lock was used to protect the ring. This patch eliminates the need for Tx spinlocks by updating the current ring position only after all ownership bits for data being transmitted have been set. This will insure that ring operations in the Tx cleanup path do not interfere with the ring operations in the Tx transmit path. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Make the Rx descriptor ring processing similar to the Tx descriptor ring processing. Remove the realloc_index and realloc_threshold variables and base everything on the current index counter and the dirty index counter. Signed-off-by:
-
Lendacky, Thomas authored
When performing a device restart, like during an MTU change, sometimes the device queues still have data and get hung up trying to flush resulting in the device becoming unresponsive until brought down and back up. To prevent this, always perform a device reset during a restart. Signed-off-by:
-
Lendacky, Thomas authored
Reads to registers are undefined when the PCS is powered down. To be safe, save the CTRL1 register used for power down during suspend and restore that value during resume. Signed-off-by:
-
Lendacky, Thomas authored
The amd-xgbe driver relies on the amd-xgbe-phy phylib driver. Add a check to be sure that if any errors occur during probing of the amd-xgbe-phy driver then the amd-xgbe driver returns an error. Signed-off-by:
-
Lendacky, Thomas authored
This set of patches resolves some checks reported by the checkpatch tool. Signed-off-by:
-
Lendacky, Thomas authored
This set of patches resolves some checks reported by the checkpatch tool. Signed-off-by:
-
- 16 Jan, 2015 14 commits
-
-
Herbert Xu authored
The patch c5adde94 ("netlink: eliminate nl_sk_hash_lock") introduced a bug where the EADDRINUSE error has been replaced by ENOMEM. This patch rectifies that problem. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Ying Xue authored
When we put our declared work task in the global workqueue with schedule_delayed_work(), its delay parameter is always zero. Therefore, we should define a regular work in rhashtable structure instead of a delayed work. By the way, we add a condition to check whether resizing functions are NULL before cancelling the work, avoiding to cancel an uninitialized work. Lastly, while we wait for all work items we submitted before to run to completion with cancel_delayed_work(), ht->mutex has been taken in rhashtable_destroy(). Moreover, cancel_delayed_work() doesn't return until all work items are accomplished, and when work items are scheduled, the work's function - rht_deferred_worker() will be called. However, as rht_deferred_worker() also needs to acquire the lock, deadlock might happen at the moment as the lock is already held before. So if the cancel work function is moved out of the lock covered scope, this will avoid the deadlock. Fixes: 97defe1e ("rhashtable: Per bucket locks & deferred expansion/shrinking") Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Refactor macros to conform to uniform standards This patch series cleansup macros/register defines, defined in t4.h and t4fw_ri_api.h and all the affected files. This patch series is created against net-next tree and includes patches on iw_cxgb4 tree. Since the patches are dependent on previous cleanup patched we would line to get this series merged through net-next tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Cleanup all the MACROS that are defined in t4fw_ri_api.h and affected files Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Cleanup all the MACROS defined in t4.h and the affected files Signed-off-by:
-
Hariprasad Shenai authored
Cleanup all the MACROS that are defined in t4fw_ri_api.h and affected files Signed-off-by:
-
Hariprasad Shenai authored
Cleanup all the MACROS defined in t4.h and the affected files Signed-off-by:
-
Xander Huff authored
10/100 MACB does not have the same statistics possibilities as GEM. Separate macb_ethtool_ops to make a new GEM-specific struct with the new statistics functions included. Signed-off-by:
Xander Huff <xander.huff@ni.com> Signed-off-by:
-
Xander Huff authored
Spaces should surround add, multiply, and bitshift operators. Signed-off-by:
-
Xander Huff authored
Change comments to not exceed 80 characters per line. Update block comments in macb.h to start on the line after /*. Signed-off-by:
-
Shrikrishna Khare authored
Signed-off-by:
Gao Zhenyu <gzhenyu@vmware.com> Signed-off-by:
Shrikrishna Khare <skhare@vmware.com> Reviewed-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Nicolas Dichtel authored
This is just a cleanup, because in the current code MDBA_SET_ENTRY_MAX == MDBA_SET_ENTRY. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Michael Schmitz authored
Add Atari specific code to the smc91x Ethernet driver. This code is used on the EtherNAT adapter card for the Atari Falcon extension port. Signed-off-by:
Michael Schmitz <schmitz@debian.org> Tested-by:
Christian Steigies <cts@debian.org> [geert: Sort Kconfig entries, split in hard and soft dependencies] Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Nicolas Pitre <nico@fluxnic.net> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2015-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Here's a big pile of changes for this round. We have * a lot of regulatory code changes to deal with the way newer Intel devices handle this * a change to drop packets while disconnecting from an AP instead of trying to wait for them * a new attempt at improving the tailroom accounting to not kick in too much for performance reasons * improvements in wireless link statistics * many other small improvements and small fixes that didn't seem necessary for 3.19 (e.g. in hwsim which is testing only code) Conflicts: drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c Minor overlapping changes. Signed-off-by:
-
- 15 Jan, 2015 15 commits
-
-
David S. Miller authored
Anish Bhatt says: ==================== cxgb4/cxgb4i : Update & use ipv6 handling api This patch series consolidates and updates the ipv6 api, as well as exports it for use by upper level drivers dependent on cxgb4 v2: Fix formatting issues in clip_tbl.c ==================== Signed-off-by: -
Anish Bhatt authored
Get a reference on every ipv6 address we offload to hardware so that it cannot be prematurely cleared out before cleanup. Signed-off-by:
Anish Bhatt <anish@chelsio.com> Signed-off-by:
-
Anish Bhatt authored
This patch improves on previously added support for ipv6 addresses. The code is consolidated to a single file and adds an api for use by dependent upper level drivers such as cxgb4i/iw_cxgb4 etc. Signed-off-by:
Deepak Singh <deepak.s@chelsio.com> Signed-off-by:
-
Eric Dumazet authored
RAW sockets with hdrinc suffer from contention on rt_uncached_lock spinlock. One solution is to use percpu lists, since most routes are destroyed by the cpu that created them. It is unclear why we even have to put these routes in uncached_list, as all outgoing packets should be freed when a device is dismantled. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: caacf05e ("ipv4: Properly purge netdev references on uncached routes.") Signed-off-by:
-
Geert Uytterhoeven authored
Replace "unsigned long" by "u32" when handling 32-bit register data. A.o., this saves 11 * 36 bytes in the static sh_eth_cpu_data structures when compiling for 64-bit. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
In boards, the dm9000 chip's power and reset can be controlled by gpio. It makes sense to add them to the dm9000 driver and let dt be used to enable power and reset the phy. Signed-off-by:
Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
Nicolas Dichtel authored
Better to use available helpers. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== netfilter updates for net-next The following patchset contains netfilter updates for net-next, just a bunch of cleanups and small enhancement to selectively flush conntracks in ctnetlink, more specifically the patches are: 1) Rise default number of buckets in conntrack from 16384 to 65536 in systems with >= 4GBytes, patch from Marcelo Leitner. 2) Small refactor to save one level on indentation in xt_osf, from Joe Perches. 3) Remove unnecessary sizeof(char) in nf_log, from Fabian Frederick. 4) Another small cleanup to remove redundant variable in nfnetlink, from Duan Jiong. 5) Fix compilation warning in nfnetlink_cthelper on parisc, from Chen Gang. 6) Fix wrong format in debugging for ctseqadj, from Gao feng. 7) Selective conntrack flushing through the mark for ctnetlink, patch from Kristian Evensen. 8) Remove nf_ct_conntrack_flush_report() exported symbol now that is not required anymore after the selective flushing patch, again from Kristian. ==================== Signed-off-by: -
David S. Miller authored
Thomas Graf says: ==================== VXLAN Group Policy Extension Implements supports for the Group Policy VXLAN extension [0] to provide a lightweight and simple security label mechanism across network peers based on VXLAN. The security context and associated metadata is mapped to/from skb->mark. This allows further mapping to a SELinux context using SECMARK, to implement ACLs directly with nftables, iptables, OVS, tc, etc. The extension is disabled by default and should be run on a distinct port in mixed Linux VXLAN VTEP environments. Liberal VXLAN VTEPs which ignore unknown reserved bits will be able to receive VXLAN-GBP frames. Simple usage example: 10.1.1.1: # ip link add vxlan0 type vxlan id 10 remote 10.1.1.2 gbp # iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200 10.1.1.2: # ip link add vxlan0 type vxlan id 10 remote 10.1.1.1 gbp # iptables -I INPUT -m mark --mark 0x200 -j DROP iproute2 [1] and OVS [2] support will be provided in separate patches. [0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy [1] https://github.com/tgraf/iproute2/tree/vxlan-gbp [2] https://github.com/tgraf/ovs/tree/vxlan-gbp ==================== Signed-off-by:
-
Thomas Graf authored
Introduces support for the group policy extension to the VXLAN virtual port. The extension is disabled by default and only enabled if the user has provided the respective configuration. ovs-vsctl add-port br0 vxlan0 -- \ set Interface vxlan0 type=vxlan options:exts=gbp The configuration interface to enable the extension is based on a new attribute OVS_VXLAN_EXT_GBP nested inside OVS_TUNNEL_ATTR_EXTENSION which can carry additional extensions as needed in the future. The group policy metadata is stored as binary blob (struct ovs_vxlan_opts) internally just like Geneve options but transported as nested Netlink attributes to user space. Renames the existing TUNNEL_OPTIONS_PRESENT to TUNNEL_GENEVE_OPT with the binary value kept intact, a new flag TUNNEL_VXLAN_OPT is introduced. The attributes OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS and existing OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS are implemented mutually exclusive. Signed-off-by: -
Thomas Graf authored
nlattr_set() is currently hardcoded to two levels of nesting. This change introduces struct ovs_len_tbl to define minimal length requirements plus next level nesting tables to traverse the key attributes to arbitrary depth. Signed-off-by:
-
Thomas Graf authored
Also factors out Geneve validation code into a new separate function validate_and_copy_geneve_opts(). A subsequent patch will introduce VXLAN options. Rename the existing GENEVE_TUN_OPTS() to reflect its extended purpose of carrying generic tunnel metadata options. Signed-off-by:
-
Thomas Graf authored
A VXLAN net_device looking for an appropriate socket may only consider a socket which has a matching set of flags/extensions enabled. If incompatible flags are enabled, return a conflict to have the caller create a distinct socket with distinct port. The OVS VXLAN port is kept unaware of extensions at this point. Signed-off-by:
-
Thomas Graf authored
Implements supports for the Group Policy VXLAN extension [0] to provide a lightweight and simple security label mechanism across network peers based on VXLAN. The security context and associated metadata is mapped to/from skb->mark. This allows further mapping to a SELinux context using SECMARK, to implement ACLs directly with nftables, iptables, OVS, tc, etc. The group membership is defined by the lower 16 bits of skb->mark, the upper 16 bits are used for flags. SELinux allows to manage label to secure local resources. However, distributed applications require ACLs to implemented across hosts. This is typically achieved by matching on L2-L4 fields to identify the original sending host and process on the receiver. On top of that, netlabel and specifically CIPSO [1] allow to map security contexts to universal labels. However, netlabel and CIPSO are relatively complex. This patch provides a lightweight alternative for overlay network environments with a trusted underlay. No additional control protocol is required. Host 1: Host 2: Group A Group B Group B Group A +-----+ +-------------+ +-------+ +-----+ | lxc | | SELinux CTX | | httpd | | VM | +--+--+ +--+----------+ +---+---+ +--+--+ \---+---/ \----+---/ | | +---+---+ +---+---+ | vxlan | | vxlan | +---+---+ +---+---+ +------------------------------+ Backwards compatibility: A VXLAN-GBP socket can receive standard VXLAN frames and will assign the default group 0x0000 to such frames. A Linux VXLAN socket will drop VXLAN-GBP frames. The extension is therefore disabled by default and needs to be specifically enabled: ip link add [...] type vxlan [...] gbp In a mixed environment with VXLAN and VXLAN-GBP sockets, the GBP socket must run on a separate port number. Examples: iptables: host1# iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200 host2# iptables -I INPUT -m mark --mark 0x200 -j DROP OVS: # ovs-ofctl add-flow br0 'in_port=1,actions=load:0x200->NXM_NX_TUN_GBP_ID[],NORMAL' # ovs-ofctl add-flow br0 'in_port=2,tun_gbp_id=0x200,actions=drop' [0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy [1] http://lwn.net/Articles/204905/Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by:
-
- 14 Jan, 2015 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't use uninitialized data in IPVS, from Dan Carpenter. 2) conntrack race fixes from Pablo Neira Ayuso. 3) Fix TX hangs with i40e, from Jesse Brandeburg. 4) Fix budget return from poll calls in dnet and alx, from Eric Dumazet. 5) Fix bugus "if (unlikely(x) < 0)" test in AF_PACKET, from Christoph Jaeger. 6) Fix bug introduced by conversion to list_head in TIPC retransmit code, from Jon Paul Maloy. 7) Don't use GFP_NOIO under spinlock in USB kaweth driver, from Alexey Khoroshilov. 8) Fix bridge build with INET disabled, from Arnd Bergmann. 9) Fix netlink array overrun for PROBE attributes in openvswitch, from Thomas Graf. 10) Don't hold spinlock across synchronize_irq() in tg3 driver, from Prashant Sreedharan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) tg3: Release tp->lock before invoking synchronize_irq() tg3: tg3_reset_task() needs to use rtnl_lock to synchronize tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin openvswitch: packet messages need their own probe attribtue i40e: adds FCoE configure option cxgb4vf: Fix queue allocation for 40G adapter netdevice: Add missing parentheses in macro bridge: only provide proxy ARP when CONFIG_INET is enabled neighbour: fix base_reachable_time(_ms) not effective immediatly when changed net: fec: fix MDIO bus assignement for dual fec SoC's xen-netfront: use different locks for Rx and Tx stats drivers: net: cpsw: fix multicast flush in dual emac mode cxgb4vf: Initialize mdio_addr before using it net: Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb() MAINTAINERS: add me as ibmveth maintainer tipc: fix bug in broadcast retransmit code update ip-sysctl.txt documentation (v2) net/at91_ether: prepare and unprepare clock ... -
David S. Miller authored
Prashant Sreedharan says: ==================== tg3: synchronize_irq() should be called without taking locks v2: Added Reported-by, Tested-by fields and reference to the thread that reported the problem This series addresses the problem reported by Peter Hurley in mail thread https://lkml.org/lkml/2015/1/12/1082 ==================== Signed-off-by: -
Prashant Sreedharan authored
synchronize_irq() can sleep waiting, for pending IRQ handlers so driver should release the tp->lock spin lock before invoking synchronize_irq() Reported-by:
Peter Hurley <peter@hurleysoftware.com> Tested-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Prashant Sreedharan authored
Currently tg3_reset_task() uses only tp->lock for synchronizing with code paths like tg3_open() etc. But since tp->lock is released before doing synchronize_irq(), rtnl_lock should be taken in tg3_reset_task() to synchronize it with other code paths. Reported-by:
-
