- 11 Mar, 2019 1 commit
-
-
Miaohe Lin authored
In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to 32,so UBSAN complain about it. UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 ubsan_epilogue+0xe/0x81 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425 check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781 try_6rd net/ipv6/sit.c:806 [inline] ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline] sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033 __netdev_start_xmit include/linux/netdevice.h:4300 [inline] netdev_start_xmit include/linux/netdevice.h:4309 [inline] xmit_one net/core/dev.c:3243 [inline] dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259 __dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829 neigh_output include/net/neighbour.h:501 [inline] ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120 ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176 ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697 ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717 rawv6_push_pending_frames net/ipv6/raw.c:616 [inline] rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946 inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xc8/0x110 net/socket.c:631 ___sys_sendmsg+0x6cf/0x890 net/socket.c:2114 __sys_sendmsg+0xf0/0x1b0 net/socket.c:2152 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
linmiaohe <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 10 Mar, 2019 7 commits
-
-
Eric Dumazet authored
We keep receiving syzbot reports [1] that show that tunnels do not play the rcu/IFF_UP rules properly. At device dismantle phase, gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. This means that IFF_UP needs to be tested before queueing packets into netif_rx() or gro_cells. This patch implements the test in gro_cells_receive() because too many callers do not seem to bother enough. [1] BUG: unable to handle kernel paging request at fffff4ca0b9ffffe PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Call Trace: kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2' ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173 worker_thread+0x98/0xe40 kernel/workqueue.c:2319 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: CR2: fffff4ca0b9ffffe [ end trace 513fc9c1338d1cb3 ] RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Fixes: c9e6bc64 ("net: add gro_cells infrastructure") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
Same reasons than the ones explained in commit 4179cb5a ("vxlan: test dev->flags & IFF_UP before calling netif_rx()") netif_rx() or gro_cells_receive() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. A similar protocol is used for gro_cells infrastructure, as gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Otherwise we risk use-after-free and/or crashes. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by:
-
Eric Dumazet authored
In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by:
-
Kangjie Lu authored
In case ioremap fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Shiju Jose authored
The commit bfcb79fc ("PCI/ERR: Run error recovery callbacks for all affected devices") affected the non-fatal error recovery logic for the HNS and RDMA devices. This is because each HNS PF under PCIe bus receive callbacks from the AER driver when an error is reported for one of the PF. This causes unwanted PF resets because the HNS decides which PF to reset based on the reset type set. The HNS error handling code sets the reset type based on the hw error type detected. This patch provides fix for the above issue for the recovery of the hw errors in the HNS and RDMA devices. This patch needs backporting to the kernel v5.0+ Fixes: 332fbf57 ("net: hns3: add handling of hw ras errors using new set of commands") Reported-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
Shiju Jose <shiju.jose@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Eric Dumazet authored
ip_mc_may_pull() must return 0 if there is a problem, not an errno. syzbot reported : BUG: KASAN: use-after-free in br_ip4_multicast_igmp3_report net/bridge/br_multicast.c:947 [inline] BUG: KASAN: use-after-free in br_multicast_ipv4_rcv net/bridge/br_multicast.c:1631 [inline] BUG: KASAN: use-after-free in br_multicast_rcv+0x3cd8/0x4440 net/bridge/br_multicast.c:1741 Read of size 4 at addr ffff88820a4084ee by task syz-executor.2/11183 CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.0.0+ #14 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 br_ip4_multicast_igmp3_report net/bridge/br_multicast.c:947 [inline] br_multicast_ipv4_rcv net/bridge/br_multicast.c:1631 [inline] br_multicast_rcv+0x3cd8/0x4440 net/bridge/br_multicast.c:1741 br_handle_frame_finish+0xa3a/0x14c0 net/bridge/br_input.c:108 br_nf_hook_thresh+0x2ec/0x380 net/bridge/br_netfilter_hooks.c:1005 br_nf_pre_routing_finish+0x8e2/0x1750 net/bridge/br_netfilter_hooks.c:410 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] br_nf_pre_routing+0x7e7/0x13a0 net/bridge/br_netfilter_hooks.c:506 nf_hook_entry_hookfn include/linux/netfilter.h:119 [inline] nf_hook_slow+0xbf/0x1f0 net/netfilter/core.c:511 nf_hook include/linux/netfilter.h:244 [inline] NF_HOOK include/linux/netfilter.h:287 [inline] br_handle_frame+0x95b/0x1450 net/bridge/br_input.c:305 __netif_receive_skb_core+0xa96/0x3040 net/core/dev.c:4902 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:4971 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5186 netif_receive_skb+0x6e/0x5a0 net/core/dev.c:5261 Fixes: ba5ea614 ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls") Signed-off-by:
-
Guillaume Nault authored
As Eric Dumazet said, "We do not have a way to tell if the req was ever inserted in a hash table, so better play safe.". Let's remove this comment, so that nobody will be tempted to drop the WARN_ON_ONCE() line. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
- 09 Mar, 2019 5 commits
-
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever '&&' condition is false [-Werror,-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_systime wraps), as it may fail to initialize these values if the if condition was ever false (meaning the callback doesn't exist). It's not wrong because the callback is what initializes ns. While it's unlikely that the callback is going to disappear at some point and make that condition false, we can easily avoid this warning by zero initializing the variable. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Fixes: df103170 ("net: stmmac: Avoid sometimes uninitialized Clang warnings") Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Andrew Lunn authored
By default, the switch driver is expected to configure CPU and DSA ports to their maximum speed. For the 6341 and 6390 families, the ports interface mode has to be configured as well. The 6390X range support 10G ports using XAUI, while the 6341 and 6390 supports 2500BaseX, as their maximum speed. Fixes: 787799a9 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David Howells authored
rxrpc_get_client_conn() adds a new call to the front of the waiting_calls queue if the connection it's going to use already exists. This is bad as it allows calls to get starved out. Fix this by adding to the tail instead. Also change the other enqueue point in the same function to put it on the front (ie. when we have a new connection). This makes the point that in the case of a new connection the new call goes at the front (though it doesn't actually matter since the queue should be unoccupied). Fixes: 45025bce ("rxrpc: Improve management and caching of client connection objects") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-03-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a crash in AF_XDP's xsk_diag_put_ring() which was passing wrong queue argument, from Eric. 2) Fix a regression due to wrong test for TCP GSO packets used in various BPF helpers like NAT64, from Willem. 3) Fix a sk_msg strparser warning which asserts that strparser must be stopped first, from Jakub. 4) Fix rejection of invalid options/bind flags in AF_XDP, from Björn. 5) Fix GSO in bpf_lwt_push_ip_encap() which must properly set inner headers and inner protocol, from Peter. 6) Fix a libbpf leak when kernel does not support BTF, from Nikita. 7) Various BPF selftest and libbpf build fixes to make out-of-tree compilation work and to properly resolve dependencies via fixdep target, from Stanislav. 8) Fix rejection of invalid ldimm64 imm field, from Daniel. 9) Fix bpf stats sysctl compile warning of unused helper function proc_dointvec_minmax_bpf_stats() under some configs, from Arnd. 10) Fix couple of warnings about using plain integer as NULL, from Bo. 11) Fix some BPF sample spelling mistakes, from Colin. ==================== Signed-off-by: -
Guillaume Nault authored
Commit 7716682c ("tcp/dccp: fix another race at listener dismantle") let inet_csk_reqsk_queue_add() fail, and adjusted {tcp,dccp}_check_req() accordingly. However, TFO and syncookies weren't modified, thus leaking allocated resources on error. Contrary to tcp_check_req(), in both syncookies and TFO cases, we need to drop the request socket. Also, since the child socket is created with inet_csk_clone_lock(), we have to unlock it and drop an extra reference (->sk_refcount is initially set to 2 and inet_csk_reqsk_queue_add() drops only one ref). For TFO, we also need to revert the work done by tcp_try_fastopen() (with reqsk_fastopen_remove()). Fixes: 7716682c ("tcp/dccp: fix another race at listener dismantle") Signed-off-by:
-
- 08 Mar, 2019 27 commits
-
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/sun/niu.c:7466:5: warning: variable 'class' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default case can never happen because i can only be 0 to 3 (NIU_L3_PROG_CLS is defined as 4). To make this clear to Clang, just zero initialize class in the default case (use the macro CLASS_CODE_UNRECOG to make it clear this shouldn't happen). Link: https://github.com/ClangBuiltLinux/linux/issues/403Signed-off-by:
-
Matthew Whitehead authored
Add PCI vendor and device identifier for U.S. Robotics USR997901A 10/100 Cardbus NIC. Tested on real hardware. Signed-off-by:
Matthew Whitehead <tedheadster@gmail.com> Signed-off-by:
-
Eric Dumazet authored
My prior commit missed the fact that these functions were using udp_hdr() (aka skb_transport_header()) to get access to GUE header. Since pskb_transport_may_pull() does not exist yet, we have to add transport_offset to our pskb_may_pull() calls. BUG: KMSAN: uninit-value in gue_err+0x514/0xfa0 net/ipv4/fou.c:1032 CPU: 1 PID: 10648 Comm: syz-executor.1 Not tainted 5.0.0+ #11 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 gue_err+0x514/0xfa0 net/ipv4/fou.c:1032 __udp4_lib_err_encap_no_sk net/ipv4/udp.c:571 [inline] __udp4_lib_err_encap net/ipv4/udp.c:626 [inline] __udp4_lib_err+0x12e6/0x1d40 net/ipv4/udp.c:665 udp_err+0x74/0x90 net/ipv4/udp.c:737 icmp_socket_deliver net/ipv4/icmp.c:767 [inline] icmp_unreach+0xb65/0x1070 net/ipv4/icmp.c:884 icmp_rcv+0x11a1/0x1950 net/ipv4/icmp.c:1066 ip_protocol_deliver_rcu+0x584/0xbb0 net/ipv4/ip_input.c:208 ip_local_deliver_finish net/ipv4/ip_input.c:234 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] ip_local_deliver+0x624/0x7b0 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish net/ipv4/ip_input.c:414 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] ip_rcv+0x6bd/0x740 net/ipv4/ip_input.c:524 __netif_receive_skb_one_core net/core/dev.c:4973 [inline] __netif_receive_skb net/core/dev.c:5083 [inline] process_backlog+0x756/0x10e0 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x78b/0x1a60 net/core/dev.c:6412 __do_softirq+0x53f/0x93a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:375 [inline] irq_exit+0x214/0x250 kernel/softirq.c:416 exiting_irq+0xe/0x10 arch/x86/include/asm/apic.h:536 smp_apic_timer_interrupt+0x48/0x70 arch/x86/kernel/apic/apic.c:1064 apic_timer_interrupt+0x2e/0x40 arch/x86/entry/entry_64.S:814 </IRQ> RIP: 0010:finish_lock_switch+0x2b/0x40 kernel/sched/core.c:2597 Code: 48 89 e5 53 48 89 fb e8 63 e7 95 00 8b b8 88 0c 00 00 48 8b 00 48 85 c0 75 12 48 89 df e8 dd db 95 00 c6 00 00 c6 03 00 fb 5b <5d> c3 e8 4e e6 95 00 eb e7 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 RSP: 0018:ffff888081a0fc80 EFLAGS: 00000296 ORIG_RAX: ffffffffffffff13 RAX: ffff88821fd6bd80 RBX: ffff888027898000 RCX: ccccccccccccd000 RDX: ffff88821fca8d80 RSI: ffff888000000000 RDI: 00000000000004a0 RBP: ffff888081a0fc80 R08: 0000000000000002 R09: ffff888081a0fb08 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffff88811130e388 R14: ffff88811130da00 R15: ffff88812fdb7d80 finish_task_switch+0xfc/0x2d0 kernel/sched/core.c:2698 context_switch kernel/sched/core.c:2851 [inline] __schedule+0x6cc/0x800 kernel/sched/core.c:3491 schedule+0x15b/0x240 kernel/sched/core.c:3535 freezable_schedule include/linux/freezer.h:172 [inline] do_nanosleep+0x2ba/0x980 kernel/time/hrtimer.c:1679 hrtimer_nanosleep kernel/time/hrtimer.c:1733 [inline] __do_sys_nanosleep kernel/time/hrtimer.c:1767 [inline] __se_sys_nanosleep+0x746/0x960 kernel/time/hrtimer.c:1754 __x64_sys_nanosleep+0x3e/0x60 kernel/time/hrtimer.c:1754 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x4855a0 Code: 00 00 48 c7 c0 d4 ff ff ff 64 c7 00 16 00 00 00 31 c0 eb be 66 0f 1f 44 00 00 83 3d b1 11 5d 00 00 75 14 b8 23 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 04 e2 f8 ff c3 48 83 ec 08 e8 3a 55 fd ff RSP: 002b:0000000000a4fd58 EFLAGS: 00000246 ORIG_RAX: 0000000000000023 RAX: ffffffffffffffda RBX: 0000000000085780 RCX: 00000000004855a0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000a4fd60 RBP: 00000000000007ec R08: 0000000000000001 R09: 0000000000ceb940 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008 R13: 0000000000a4fdb0 R14: 0000000000085711 R15: 0000000000a4fdc0 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4398 __kmalloc_reserve net/core/skbuff.c:140 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] alloc_skb_with_frags+0x186/0xa60 net/core/skbuff.c:5287 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091 sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108 __ip_append_data+0x34cd/0x5000 net/ipv4/ip_output.c:998 ip_append_data+0x324/0x480 net/ipv4/ip_output.c:1220 icmp_push_reply+0x23d/0x7e0 net/ipv4/icmp.c:375 __icmp_send+0x2ea3/0x30f0 net/ipv4/icmp.c:737 icmp_send include/net/icmp.h:47 [inline] ipv4_link_failure+0x6d/0x230 net/ipv4/route.c:1190 dst_link_failure include/net/dst.h:427 [inline] arp_error_report+0x106/0x1a0 net/ipv4/arp.c:297 neigh_invalidate+0x359/0x8e0 net/core/neighbour.c:992 neigh_timer_handler+0xdf2/0x1280 net/core/neighbour.c:1078 call_timer_fn+0x285/0x600 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers+0xdb4/0x11d0 kernel/time/timer.c:1681 run_timer_softirq+0x2e/0x50 kernel/time/timer.c:1694 __do_softirq+0x53f/0x93a kernel/softirq.c:293 Fixes: 26fc181e ("fou, fou6: do not assume linear skbs") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Vlad Buslov authored
When used with unlocked classifier that have filters attached to actions with goto chain, __tcf_chain_put() for last non action reference can race with calls to same function from action cleanup code that releases last action reference. In this case action cleanup handler could free the chain if it executes after all references to chain were released, but before all concurrent users finished using it. Modify __tcf_chain_put() to only access tcf_chain fields when holding block->lock. Remove local variables that were used to cache some tcf_chain fields and are no longer needed because their values can now be obtained directly from chain under block->lock protection. Fixes: 726d0612 ("net: sched: prevent insertion of new classifiers during chain flush") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Arnd Bergmann authored
On some architectures, the MMU can be disabled, leading to access_ok() becoming an empty macro that does not evaluate its size argument, which in turn produces an unused-variable warning: drivers/vhost/vhost.c:1191:9: error: unused variable 's' [-Werror,-Wunused-variable] size_t s = vhost_has_feature(vq, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0; Mark the variable as __maybe_unused to shut up that warning. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Adalbert Lazăr authored
Previous to commit 22b5c0b6 ("vsock/virtio: fix kernel panic after device hot-unplug"), vsock_core_init() was called from virtio_vsock_probe(). Now, virtio_transport_reset_no_sock() can be called before vsock_core_init() has the chance to run. [Wed Feb 27 14:17:09 2019] BUG: unable to handle kernel NULL pointer dereference at 0000000000000110 [Wed Feb 27 14:17:09 2019] #PF error: [normal kernel read fault] [Wed Feb 27 14:17:09 2019] PGD 0 P4D 0 [Wed Feb 27 14:17:09 2019] Oops: 0000 [#1] SMP PTI [Wed Feb 27 14:17:09 2019] CPU: 3 PID: 59 Comm: kworker/3:1 Not tainted 5.0.0-rc7-390-generic-hvi #390 [Wed Feb 27 14:17:09 2019] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [Wed Feb 27 14:17:09 2019] Workqueue: virtio_vsock virtio_transport_rx_work [vmw_vsock_virtio_transport] [Wed Feb 27 14:17:09 2019] RIP: 0010:virtio_transport_reset_no_sock+0x8c/0xc0 [vmw_vsock_virtio_transport_common] [Wed Feb 27 14:17:09 2019] Code: 35 8b 4f 14 48 8b 57 08 31 f6 44 8b 4f 10 44 8b 07 48 8d 7d c8 e8 84 f8 ff ff 48 85 c0 48 89 c3 74 2a e8 f7 31 03 00 48 89 df <48> 8b 80 10 01 00 00 e8 68 fb 69 ed 48 8b 75 f0 65 48 33 34 25 28 [Wed Feb 27 14:17:09 2019] RSP: 0018:ffffb42701ab7d40 EFLAGS: 00010282 [Wed Feb 27 14:17:09 2019] RAX: 0000000000000000 RBX: ffff9d79637ee080 RCX: 0000000000000003 [Wed Feb 27 14:17:09 2019] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9d79637ee080 [Wed Feb 27 14:17:09 2019] RBP: ffffb42701ab7d78 R08: ffff9d796fae70e0 R09: ffff9d796f403500 [Wed Feb 27 14:17:09 2019] R10: ffffb42701ab7d90 R11: 0000000000000000 R12: ffff9d7969d09240 [Wed Feb 27 14:17:09 2019] R13: ffff9d79624e6840 R14: ffff9d7969d09318 R15: ffff9d796d48ff80 [Wed Feb 27 14:17:09 2019] FS: 0000000000000000(0000) GS:ffff9d796fac0000(0000) knlGS:0000000000000000 [Wed Feb 27 14:17:09 2019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Wed Feb 27 14:17:09 2019] CR2: 0000000000000110 CR3: 0000000427f22000 CR4: 00000000000006e0 [Wed Feb 27 14:17:09 2019] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [Wed Feb 27 14:17:09 2019] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [Wed Feb 27 14:17:09 2019] Call Trace: [Wed Feb 27 14:17:09 2019] virtio_transport_recv_pkt+0x63/0x820 [vmw_vsock_virtio_transport_common] [Wed Feb 27 14:17:09 2019] ? kfree+0x17e/0x190 [Wed Feb 27 14:17:09 2019] ? detach_buf_split+0x145/0x160 [Wed Feb 27 14:17:09 2019] ? __switch_to_asm+0x40/0x70 [Wed Feb 27 14:17:09 2019] virtio_transport_rx_work+0xa0/0x106 [vmw_vsock_virtio_transport] [Wed Feb 27 14:17:09 2019] NET: Registered protocol family 40 [Wed Feb 27 14:17:09 2019] process_one_work+0x167/0x410 [Wed Feb 27 14:17:09 2019] worker_thread+0x4d/0x460 [Wed Feb 27 14:17:09 2019] kthread+0x105/0x140 [Wed Feb 27 14:17:09 2019] ? rescuer_thread+0x360/0x360 [Wed Feb 27 14:17:09 2019] ? kthread_destroy_worker+0x50/0x50 [Wed Feb 27 14:17:09 2019] ret_from_fork+0x35/0x40 [Wed Feb 27 14:17:09 2019] Modules linked in: vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common input_leds vsock serio_raw i2c_piix4 mac_hid qemu_fw_cfg autofs4 cirrus ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net psmouse drm net_failover pata_acpi virtio_blk failover floppy Fixes: 22b5c0b6 ("vsock/virtio: fix kernel panic after device hot-unplug") Reported-by:
Alexandru Herghelegiu <aherghelegiu@bitdefender.com> Signed-off-by:
Adalbert Lazăr <alazar@bitdefender.com> Co-developed-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Li RongQing authored
proc_exit_connector() uses ->real_parent lockless. This is not safe that its parent can go away at any moment, so use RCU to protect it, and ensure that this task is not released. [ 747.624551] ================================================================== [ 747.632946] BUG: KASAN: use-after-free in proc_exit_connector+0x1f7/0x310 [ 747.640686] Read of size 4 at addr ffff88a0276988e0 by task sshd/2882 [ 747.648032] [ 747.649804] CPU: 11 PID: 2882 Comm: sshd Tainted: G E 4.19.26-rc2 #11 [ 747.658629] Hardware name: IBM x3550M4 -[7914OFV]-/00AM544, BIOS -[D7E142BUS-1.71]- 07/31/2014 [ 747.668419] Call Trace: [ 747.671269] dump_stack+0xf0/0x19b [ 747.675186] ? show_regs_print_info+0x5/0x5 [ 747.679988] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 747.685302] print_address_description+0x6a/0x270 [ 747.691162] kasan_report+0x258/0x380 [ 747.695835] ? proc_exit_connector+0x1f7/0x310 [ 747.701402] proc_exit_connector+0x1f7/0x310 [ 747.706767] ? proc_coredump_connector+0x2d0/0x2d0 [ 747.712715] ? _raw_write_unlock_irq+0x29/0x50 [ 747.718270] ? _raw_write_unlock_irq+0x29/0x50 [ 747.723820] ? ___preempt_schedule+0x16/0x18 [ 747.729193] ? ___preempt_schedule+0x16/0x18 [ 747.734574] do_exit+0xa11/0x14f0 [ 747.738880] ? mm_update_next_owner+0x590/0x590 [ 747.744525] ? debug_show_all_locks+0x3c0/0x3c0 [ 747.761448] ? ktime_get_coarse_real_ts64+0xeb/0x1c0 [ 747.767589] ? lockdep_hardirqs_on+0x1a6/0x290 [ 747.773154] ? check_chain_key+0x139/0x1f0 [ 747.778345] ? check_flags.part.35+0x240/0x240 [ 747.783908] ? __lock_acquire+0x2300/0x2300 [ 747.789171] ? _raw_spin_unlock_irqrestore+0x59/0x70 [ 747.795316] ? _raw_spin_unlock_irqrestore+0x59/0x70 [ 747.801457] ? do_raw_spin_unlock+0x10f/0x1e0 [ 747.806914] ? do_raw_spin_trylock+0x120/0x120 [ 747.812481] ? preempt_count_sub+0x14/0xc0 [ 747.817645] ? _raw_spin_unlock+0x2e/0x50 [ 747.822708] ? __handle_mm_fault+0x12db/0x1fa0 [ 747.828367] ? __pmd_alloc+0x2d0/0x2d0 [ 747.833143] ? check_noncircular+0x50/0x50 [ 747.838309] ? match_held_lock+0x7f/0x340 [ 747.843380] ? check_noncircular+0x50/0x50 [ 747.848561] ? handle_mm_fault+0x21a/0x5f0 [ 747.853730] ? check_flags.part.35+0x240/0x240 [ 747.859290] ? check_chain_key+0x139/0x1f0 [ 747.864474] ? __do_page_fault+0x40f/0x760 [ 747.869655] ? __audit_syscall_entry+0x4b/0x1f0 [ 747.875319] ? syscall_trace_enter+0x1d5/0x7b0 [ 747.880877] ? trace_raw_output_preemptirq_template+0x90/0x90 [ 747.887895] ? trace_raw_output_sys_exit+0x80/0x80 [ 747.893860] ? up_read+0x3b/0x90 [ 747.898142] ? stop_critical_timings+0x260/0x260 [ 747.903909] do_group_exit+0xe0/0x1c0 [ 747.908591] ? __x64_sys_exit+0x30/0x30 [ 747.913460] ? trace_raw_output_preemptirq_template+0x90/0x90 [ 747.920485] ? tracer_hardirqs_on+0x270/0x270 [ 747.925956] __x64_sys_exit_group+0x28/0x30 [ 747.931214] do_syscall_64+0x117/0x400 [ 747.935988] ? syscall_return_slowpath+0x2f0/0x2f0 [ 747.941931] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 747.947788] ? trace_hardirqs_on_caller+0x1d0/0x1d0 [ 747.953838] ? lockdep_sys_exit+0x16/0x8e [ 747.958915] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 747.964784] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 747.971021] RIP: 0033:0x7f572f154c68 [ 747.975606] Code: Bad RIP value. [ 747.979791] RSP: 002b:00007ffed2dfaa58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 747.989324] RAX: ffffffffffffffda RBX: 00007f572f431840 RCX: 00007f572f154c68 [ 747.997910] RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 [ 748.006495] RBP: 0000000000000001 R08: 00000000000000e7 R09: fffffffffffffee0 [ 748.015079] R10: 00007f572f4387e8 R11: 0000000000000246 R12: 00007f572f431840 [ 748.023664] R13: 000055a7f90f2c50 R14: 000055a7f96e2310 R15: 000055a7f96e2310 [ 748.032287] [ 748.034509] Allocated by task 2300: [ 748.038982] kasan_kmalloc+0xa0/0xd0 [ 748.043562] kmem_cache_alloc_node+0xf5/0x2e0 [ 748.049018] copy_process+0x1781/0x4790 [ 748.053884] _do_fork+0x166/0x9a0 [ 748.058163] do_syscall_64+0x117/0x400 [ 748.062943] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 748.069180] [ 748.071405] Freed by task 15395: [ 748.075591] __kasan_slab_free+0x130/0x180 [ 748.080752] kmem_cache_free+0xc2/0x310 [ 748.085619] free_task+0xea/0x130 [ 748.089901] __put_task_struct+0x177/0x230 [ 748.095063] finish_task_switch+0x51b/0x5d0 [ 748.100315] __schedule+0x506/0xfa0 [ 748.104791] schedule+0xca/0x260 [ 748.108978] futex_wait_queue_me+0x27e/0x420 [ 748.114333] futex_wait+0x251/0x550 [ 748.118814] do_futex+0x75b/0xf80 [ 748.123097] __x64_sys_futex+0x231/0x2a0 [ 748.128065] do_syscall_64+0x117/0x400 [ 748.132835] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 748.139066] [ 748.141289] The buggy address belongs to the object at ffff88a027698000 [ 748.141289] which belongs to the cache task_struct of size 12160 [ 748.156589] The buggy address is located 2272 bytes inside of [ 748.156589] 12160-byte region [ffff88a027698000, ffff88a02769af80) [ 748.171114] The buggy address belongs to the page: [ 748.177055] page:ffffea00809da600 count:1 mapcount:0 mapping:ffff888107d01e00 index:0x0 compound_mapcount: 0 [ 748.189136] flags: 0x57ffffc0008100(slab|head) [ 748.194688] raw: 0057ffffc0008100 ffffea00809a3200 0000000300000003 ffff888107d01e00 [ 748.204424] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000 [ 748.214146] page dumped because: kasan: bad access detected [ 748.220976] [ 748.223197] Memory state around the buggy address: [ 748.229128] ffff88a027698780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.238271] ffff88a027698800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.247414] >ffff88a027698880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.256564] ^ [ 748.264267] ffff88a027698900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.273493] ffff88a027698980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.282630] ================================================================== Fixes: b086ff87 ("connector: add parent pid and tgid to coredump and exit events") Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Litao Jiao authored
vxlan_cleanup() is a timer callback, it is already and only running in BH context. Signed-off-by:
Litao Jiao <jiaolitao@raisecom.com> Signed-off-by:
-
Jian Shen authored
HW can not guarantee complete write desc->rx.size, even though HNS3_RXD_VLD_B has been set. Driver needs to add dma_rmb() instruction to make sure desc->rx.size is always valid. Fixes: e5597095 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Pedro Tammela authored
This patch adds missing documentation for some inline functions on linux/skbuff.h. The patch is incomplete and a lot more can be added, just wondering if it's of interest of the netdev developers. Also fixed some whitespaces. Signed-off-by:
Pedro Tammela <pctammela@gmail.com> Signed-off-by:
-
Bo YU authored
Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=net/bpf/ CHECK net/bpf//test_run.c net/bpf//test_run.c:19:77: warning: Using plain integer as NULL pointer ./include/linux/bpf-cgroup.h:295:77: warning: Using plain integer as NULL pointer Fixes: 8bad74f9 ("bpf: extend cgroup bpf core to allow multiple cgroup storage types") Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Bo YU <tsu.yubo@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Björn Töpel authored
Passing a non-existing option in the options member of struct xdp_desc was, incorrectly, silently ignored. This patch addresses that behavior, and drops any Tx descriptor with non-existing options. We have examined existing user space code, and to our best knowledge, no one is relying on the current incorrect behavior. AF_XDP is still in its infancy, so from our perspective, the risk of breakage is very low, and addressing this problem now is important. Fixes: 35fcde7f ("xsk: support for Tx") Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
-
Björn Töpel authored
Passing a non-existing flag in the sxdp_flags member of struct sockaddr_xdp was, incorrectly, silently ignored. This patch addresses that behavior, and rejects any non-existing flags. We have examined existing user space code, and to our best knowledge, no one is relying on the current incorrect behavior. AF_XDP is still in its infancy, so from our perspective, the risk of breakage is very low, and addressing this problem now is important. Fixes: 965a9909 ("xsk: add support for bind for Rx") Signed-off-by:
-
Nikita V. Shirokov authored
We could end up in situation when we have object file w/ all btf info, but kernel does not support btf yet. In this situation currently libbpf just set obj->btf to NULL w/o freeing it first. This patch is fixing it by making sure to run btf__free first. Fixes: d29d87f7 ("btf: separate btf creation and loading") Signed-off-by:
Nikita V. Shirokov <tehnerd@tehnerd.com> Acked-by:
-
David S. Miller authored
Christophe Roullier says: ==================== stmmac: add some fixes for stm32 For common stmmac: - Add support to set CSR Clock range selection in DT For stm32mpu: - Glue codes to support magic packet - Glue codes to support all PHY config : PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config For stm32mcu: - Add Ethernet support for stm32h7 Changes in V3: - Reverse for syscfg management because it is manage by these patches https://lkml.org/lkml/2018/12/12/133 https://lkml.org/lkml/2018/12/12/134 https://lkml.org/lkml/2018/12/12/131 https://lkml.org/lkml/2018/12/12/132 ==================== Signed-off-by:
-
Christophe Roullier authored
Synopsys GMAC 4.10 is used. And Phy mode for eval and disco is RMII with PHY SMSC LAN8742 Signed-off-by:
Christophe Roullier <christophe.roullier@st.com> Signed-off-by:
-
Christophe Roullier authored
Syscfg clock is no more needed. Signed-off-by:
-
Christophe Roullier authored
In Documentation stmmac.txt there is possibility to fixed CSR Clock range selection with property clk_csr. This patch add the management of this property For example to use it, add in your ethernet node DT: clk_csr = <3>; Signed-off-by:
-
Christophe Roullier authored
Add properties to support all Phy config PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by:
-
Christophe Roullier authored
Update glue codes to support all PHY config on stm32mp157c PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by:
-
Christophe Roullier authored
Add glue codes to support magic packet on stm32mp157c Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: process the error returned from sctp_sock_migrate() This patchset is to process the errs returned by sctp_auth_init_hmacs() and sctp_bind_addr_dup() from sctp_sock_migrate(). And also fix a panic caused by new ep->auth_hmacs was not set due to net->sctp.auth_enable changed by sysctl before accepting an assoc. ==================== Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
New ep's auth_hmacs should be set if old ep's is set, in case that net->sctp.auth_enable has been changed to 0 by users and new ep's auth_hmacs couldn't be set in sctp_endpoint_init(). It can even crash kernel by doing: 1. on server: sysctl -w net.sctp.auth_enable=1, sysctl -w net.sctp.addip_enable=1, sysctl -w net.sctp.addip_noauth_enable=0, listen() on server, sysctl -w net.sctp.auth_enable=0. 2. on client: connect() to server. 3. on server: accept() the asoc, sysctl -w net.sctp.auth_enable=1. 4. on client: send() asconf packet to server. The call trace: [ 245.280251] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 245.286872] RIP: 0010:sctp_auth_calculate_hmac+0xa3/0x140 [sctp] [ 245.304572] Call Trace: [ 245.305091] <IRQ> [ 245.311287] sctp_sf_authenticate+0x110/0x160 [sctp] [ 245.312311] sctp_sf_eat_auth+0xf2/0x230 [sctp] [ 245.313249] sctp_do_sm+0x9a/0x2d0 [sctp] [ 245.321483] sctp_assoc_bh_rcv+0xed/0x1a0 [sctp] [ 245.322495] sctp_rcv+0xa66/0xc70 [sctp] It's because the old ep->auth_hmacs wasn't copied to the new ep while ep->auth_hmacs is used in sctp_auth_calculate_hmac() when processing the incoming auth chunks, and it should have been done when migrating sock. Reported-by:Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@redhat.com> Signed-off-by:
-
Xin Long authored
sctp_auth_init_hmacs() is called only when ep->auth_enable is set. It better to move up sctp_auth_init_hmacs() and remove auth_enable check in it and check auth_enable only once in sctp_endpoint_init(). Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Xin Long authored
It should fail to create the new sk if sctp_bind_addr_dup() fails when accepting or peeloff an association. Signed-off-by:
-
Stefano Brivio authored
If we receive a packet while deleting a VXLAN device, there's a chance vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine, except that vxlan_dellink() should never ever touch stuff that's still in use, such as the GRO cells list. Otherwise, vxlan_rcv() crashes while queueing packets via gro_cells_receive(). Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU grace period is elapsed and nothing needs the gro_cells anymore. This is now done in the same way as commit 8e816df8 ("geneve: Use GRO cells infrastructure.") originally implemented for GENEVE. Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
-
David Howells authored
rxrpc_disconnect_client_call() reads the call's connection ID protocol value (call->cid) as part of that function's variable declarations. This is bad because it's not inside the locked section and so may race with someone granting use of the channel to the call. This manifests as an assertion failure (see below) where the call in the presumed channel (0 because call->cid wasn't set when we read it) doesn't match the call attached to the channel we were actually granted (if 1, 2 or 3). Fix this by moving the read and dependent calculations inside of the channel_lock section. Also, only set the channel number and pointer variables if cid is not zero (ie. unset). This problem can be induced by injecting an occasional error in rxrpc_wait_for_channel() before the call to schedule(). Make two further changes also: (1) Add a trace for wait failure in rxrpc_connect_call(). (2) Drop channel_lock before BUG'ing in the case of the assertion failure. The failure causes a trace akin to the following: rxrpc: Assertion failed - 18446612685268945920(0xffff8880beab8c00) == 18446612685268621312(0xffff8880bea69800) is false ------------[ cut here ]------------ kernel BUG at net/rxrpc/conn_client.c:824! ... RIP: 0010:rxrpc_disconnect_client_call+0x2bf/0x99d ... Call Trace: rxrpc_connect_call+0x902/0x9b3 ? wake_up_q+0x54/0x54 rxrpc_new_client_call+0x3a0/0x751 ? rxrpc_kernel_begin_call+0x141/0x1bc ? afs_alloc_call+0x1b5/0x1b5 rxrpc_kernel_begin_call+0x141/0x1bc afs_make_call+0x20c/0x525 ? afs_alloc_call+0x1b5/0x1b5 ? __lock_is_held+0x40/0x71 ? lockdep_init_map+0xaf/0x193 ? lockdep_init_map+0xaf/0x193 ? __lock_is_held+0x40/0x71 ? yfs_fs_fetch_data+0x33b/0x34a yfs_fs_fetch_data+0x33b/0x34a afs_fetch_data+0xdc/0x3b7 afs_read_dir+0x52d/0x97f afs_dir_iterate+0xa0/0x661 ? iterate_dir+0x63/0x141 iterate_dir+0xa2/0x141 ksys_getdents64+0x9f/0x11b ? filldir+0x111/0x111 ? do_syscall_64+0x3e/0x1a0 __x64_sys_getdents64+0x16/0x19 do_syscall_64+0x7d/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 45025bce ("rxrpc: Improve management and caching of client connection objects") Signed-off-by:
-
