- 19 Jul, 2017 1 commit
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A number of small fixes for -rc1 Luminous changes plus a readdir race fix, marked for stable" * tag 'ceph-for-4.13-rc2' of git://github.com/ceph/ceph-client: libceph: potential NULL dereference in ceph_msg_data_create() ceph: fix race in concurrent readdir libceph: don't call encode_request_finish() on MOSDBackoff messages libceph: use alloc_pg_mapping() in __decode_pg_upmap_items() libceph: set -EINVAL in one place in crush_decode() libceph: NULL deref on osdmap_apply_incremental() error path libceph: fix old style declaration warnings
-
- 18 Jul, 2017 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD fixes from Shaohua Li: - raid5-ppl fix by Artur. This one is introduced in this release cycle. - raid5 reshape fix by Xiao. This is an old bug and will be added to stable. - bitmap fix by Guoqing. * tag 'md/4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid5-ppl: use BIOSET_NEED_BVECS when creating bioset Raid5 should update rdev->sectors after reshape md/bitmap: don't read page from device with Bitmap_sync
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "First set of -rc fixes for 4.13 cycle: - misc iSER fixes - namespace fixups - fix the fact that IPoIB didn't use the proper API for noio mem allocs - rxe driver fixes - hns_roce fixes - misc core fixes - misc IPoIB fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (27 commits) IB/core: Allow QP state transition from reset to error IB/hns: Fix for checkpatch.pl comment style warnings IB/hns: Fix the bug with modifying the MAC address without removing the driver IB/hns: Fix the bug with rdma operation IB/hns: Fix the bug with wild pointer when destroy rc qp IB/hns: Fix the bug of polling cq failed for loopback Qps IB/rxe: Set dma_mask and coherent_dma_mask IB/rxe: Fix kernel panic from skb destructor IB/ipoib: Let lower driver handle get_stats64 call IB/core: Add ordered workqueue for RoCE GID management IB/mlx5: Clean mr_cache debugfs in case of failure IB/core: Remove NOIO QP create flag {net, IB}/mlx4: Remove gfp flags argument IB/{rdmavt, qib, hfi1}: Remove gfp flags argument IB/IPoIB: Convert IPoIB to memalloc_noio_* calls IB/IPoIB: Forward MTU change to driver below IB: Convert msleep below 20ms to usleep_range IB/uverbs: Make use of ib_modify_qp variant to avoid resolving DMAC IB/core: Introduce modify QP operation with udata IB/core: Don't resolve IP address to the loopback device ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fix from Bruce Fields: "One fix for a problem introduced in the most recent merge window and found by Dave Jones and KASAN" * tag 'nfsd-4.13-1' of git://linux-nfs.org/~bfields/linux: nfsd: Fix a memory scribble in the callback channel
-
Tadeusz Struk authored
Playing with IP-O-IB interface can trigger a warning message: "ib0: Failed to modify QP to ERROR state" to be logged. This happens when the QP is in IB_QPS_RESET state and the stack is trying to transition it to IB_QPS_ERR state in ipoib_ib_dev_stop(). According to the IB spec, Table 91 - "QP State Transition Properties" it looks like the transition from reset to error is valid: Transition: Any State to Error Required Attributes: None Optional Attributes: None allowed Actions: Queue processing is stopped. Work Requests pending or in process are completed in error, when possible. This patch allows the transition and quiets the message. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
oulijun authored
This patch correct the comment style warnings caught by checkpatch.pl script. Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
oulijun authored
When modified the MAC address used hns_roce_mac function, we release and create reserved qp again, It is not necessary to use spin_lock_bh and spin_unlock_bh in handle_en_event, Otherwise, it will occur a error. This patch mainly fixes it. Signed-off-by:
-
oulijun authored
When opcode of work request is RDMA read and write, it should use rdma_wr to get remote_addr and rkey. This patch fixes it. Signed-off-by:
-
oulijun authored
When destroyed rc qp, the hr_qp will be used after freed. This patch will fix it. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
oulijun authored
In hip06 SoC, RoCE driver creates 8 reserved loopback QPs to ensure zero wqe when free mr. However, if the enabled phy port number is less than 6, it will fail in polling cqe with 8 reserved loopback QPs. In order to solve this problem, the number of loopback Qps will be adjusted based on the number of enabled phy port. Signed-off-by:
Shaobo Xu <xushaobo2@huawei.com> Signed-off-by:
-
yonatanc authored
The RXE coupled with dummy device causes to the kernel panic attached below. The panic happens when ib_register_device tries to set dma_mask by accessing a NULLed parent device. The RXE does not actually use DMA, so we can set the dma_mask to architecture value. [16240.199689] RIP: 0010:ib_register_device+0x468/0x5a0 [ib_core] [16240.205289] RSP: 0018:ffffc9000220fc10 EFLAGS: 00010246 [16240.209909] RAX: 0000000000000024 RBX: ffff880220d1a2a8 RCX: 0000000000000000 [16240.212244] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009 [16240.214385] RBP: ffffc9000220fcb0 R08: 0000000000000000 R09: 000000000000023f [16240.254465] R10: 0000000000000007 R11: 0000000000000000 R12: 0000000000000000 [16240.259467] R13: 0000000000000000 R14: 0000000000000000 R15: ffff880220d1a2a8 [16240.263314] FS: 00007fd8ecca0740(0000) GS:ffff8802364c0000(0000) knlGS:0000000000000000 [16240.267292] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16240.273503] CR2: 0000000000000218 CR3: 00000002253ba000 CR4: 00000000000006e0 [16240.277066] Call Trace: [16240.281836] ? __kmalloc+0x26f/0x280 [16240.286596] rxe_register_device+0x297/0x300 [rdma_rxe] [16240.291377] rxe_add+0x535/0x5b0 [rdma_rxe] [16240.297586] rxe_net_add+0x3e/0xc0 [rdma_rxe] [16240.302375] rxe_param_set_add+0x65/0x144 [rdma_rxe] [16240.307769] param_attr_store+0x68/0xd0 [16240.311640] module_attr_store+0x1d/0x30 [16240.316421] sysfs_kf_write+0x3a/0x50 [16240.317802] kernfs_fop_write+0xff/0x180 [16240.322989] __vfs_write+0x37/0x140 [16240.328164] ? handle_mm_fault+0xce/0x240 [16240.333340] vfs_write+0xb2/0x1b0 [16240.335013] SyS_write+0x55/0xc0 [16240.340632] entry_SYSCALL_64_fastpath+0x1a/0xa9 Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Yonatan Cohen authored
In the time between rxe_send has finished and skb destructor called, the QP's ref count might be 0, leading to a possible QP destruction. This will lead to a kernel panic when the destructor dereferences the QP. The operation of incrementing QP ref count at rxe_send and decrementing from skb destructor will prevent this crash. BUG: unable to handle kernel NULL pointer dereference at 000000000000072c IP: [<ffffffffa05df765>] rxe_skb_tx_dtor+0x15/0x50 [rdma_rxe] PGD 0 [16240.211178] Oops: 0002 [#1] SMP CPU: 3 PID: 0 Comm: swapper/3 Tainted: G OE 4.9.0-mlnx #1 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 task: ffff88042d6b1480 task.stack: ffffc90001904000 RIP: 0010:[<ffffffffa05df765>] [<ffffffffa05df765>] rxe_skb_tx_dtor+0x15/0x50 [rdma_rxe] RSP: 0018:ffff88043fcc3df0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880429684700 RCX: ffff88042d248200 RDX: 00000000ffffffff RSI: 00000000fffffe01 RDI: ffff880429684700 RBP: ffff88043fcc3e00 R08: ffff88043fcda240 R09: 00000000ff2d1de6 R10: 0000000000000000 R11: 00000000f49cf6fe R12: ffff880429684700 R13: ffffffff81893f96 R14: ffffffff817d66f0 R15: ffff880427f74200 FS: 0000000000000000(0000) GS:ffff88043fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000072c CR3: 000000041d3df000 CR4: 00000000000006e0 Stack: ffffffff817b29cf ffff880429684700 ffff88043fcc3e18 ffffffff817b42c2 ffff880429684700 ffff88043fcc3e40 ffffffff817b4332 ffff880429684700 ffff880427f74238 ffff880427f74228 ffff88043fcc3e58 ffffffff81893f96 Call Trace: <IRQ> [16240.336345] [<ffffffff817b29cf>] ? skb_release_head_state+0x4f/0xb0 [<ffffffff817b42c2>] skb_release_all+0x12/0x30 [<ffffffff817b4332>] kfree_skb+0x32/0x90 [<ffffffff81893f96>] ndisc_error_report+0x36/0x40 [<ffffffff817d4de1>] neigh_invalidate+0x81/0xf0 [<ffffffff817d68f7>] neigh_timer_handler+0x207/0x2b0 [<ffffffff81109295>] call_timer_fn+0x35/0x120 [<ffffffff81109db7>] run_timer_softirq+0x1d7/0x460 [<ffffffff8106155e>] ? kvm_sched_clock_read+0x1e/0x30 [<ffffffff810366b9>] ? sched_clock+0x9/0x10 [<ffffffff810cfed2>] ? sched_clock_cpu+0x72/0xa0 [<ffffffff818dd537>] __do_softirq+0xd7/0x289 [<ffffffff810a6c95>] irq_exit+0xb5/0xc0 [<ffffffff818dd372>] smp_apic_timer_interrupt+0x42/0x50 [<ffffffff818dc682>] apic_timer_interrupt+0x82/0x90 <EOI> [16240.395776] [<ffffffff818da156>] ? native_safe_halt+0x6/0x10 [<ffffffff818d9e6e>] default_idle+0x1e/0xd0 [<ffffffff8103797f>] arch_cpu_idle+0xf/0x20 [<ffffffff818da2c5>] default_idle_call+0x35/0x40 [<ffffffff810e3eb5>] cpu_startup_entry+0x185/0x210 [<ffffffff81050433>] start_secondary+0x103/0x130 RIP [<ffffffffa05df765>] rxe_skb_tx_dtor+0x15/0x50 [rdma_rxe] Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
-
Erez Shitrit authored
The driver checks if the lower level driver supports get_stats, and if so calls it to get the updated statistics, otherwise takes from the current netdevice stats object. Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Majd Dibbiny authored
Currently the RoCE GID management uses the ib_wq to do add and delete new GIDs according to the netdev events. The ib_wq isn't an ordered workqueue and thus two work elements can be executed concurrently which will result in unexpected behavior and inconsistency of the GIDs cache content. Example: ifconfig eth1 11.11.11.11/16 up This command will invoke the following netdev events in the following order: 1. NETDEV_UP 2. NETDEV_DOWN 3. NETDEV_UP If (2) and (3) will be executed concurrently or in reverse order, instead of having a new GID with 11.11.11.11 IP, we will end up without any new GIDs. Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
The failure in creation of debugfs entries for mr_cache left entries, which were already created. It caused to mismatch and misguiding for the end users. The solution is to clean mr_cache debugfs root, so no leftovers will be in the system. In addition, let's document why the error is not needed to be forwarded to user in case of failure. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
There are no users for IB_QP_CREATE_USE_GFP_NOIO flag, so let's remove it. Signed-off-by:
-
Leon Romanovsky authored
The caller to the driver marks GFP_NOIO allocations with help of memalloc_noio-* calls now. This makes redundant to pass down to the driver gfp flags, which can be GFP_KERNEL only. The patch removes the gfp flags argument and updates all driver paths. Signed-off-by:
-
Leon Romanovsky authored
The caller to the driver marks GFP_NOIO allocations with help of memalloc_noio-* calls now. This makes redundant to pass down to the driver gfp flags, which can be GFP_KERNEL only. The patch removes the gfp flags argument and updates all driver paths. Signed-off-by:
-
Leon Romanovsky authored
Commit 21caf2fc ("mm: teach mm by current context info to not do I/O during memory allocation") added the memalloc_noio_(save|restore) functions to enable people to modify the MM behavior by disabling I/O during memory allocation. This was further extended in Fixes: 934f3072 ("mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set"). memalloc_noio_* functions prevent allocation paths recursing back into the filesystem without explicitly changing the flags for every allocation site. However the IPoIB hasn't been keeping up with the changes and missed completely these memalloc_noio_* calls. This led to update of allocation site with special QP creation flag, see commit 09b93088 ("IB: Add a QP creation flag to use GFP_NOIO allocations"), while this flag is supported by small number of drivers in IB stack. Let's change it by updating to memalloc_noio_* calls and allow for every driver underneath enjoy NOIO allocations. Signed-off-by:
-
Erez Shitrit authored
This patch checks if there is a driver below that needs to be updated on the new MTU and calls it accordingly. Signed-off-by:
-
Leon Romanovsky authored
The msleep(1) may do not sleep 1 ms as expected and will sleep longer. The simple conversion from msleep to usleep_range between 1ms and 2ms can solve an issue. The full and comprehensive explanation can be found at [1] and [2]. [1] https://lkml.org/lkml/2007/8/3/250 [2] Documentation/timers/timers-howto.txt Signed-off-by:
-
Parav Pandit authored
This patch makes use of IB core's ib_modify_qp_with_udata function that also resolves the DMAC and handles udata. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Parav Pandit authored
This patch adds new function ib_modify_qp_with_udata so that uverbs layer can avoid handling L2 mac address at verbs layer and depend on the core layer to resolve the mac address consistently for all required QPs. Signed-off-by:
-
- 17 Jul, 2017 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: - Fix DMA regression in 4.13 merge window, only certain chips can do 64-bit DMA. From Dave Dushar. - Correct cpu cross-call algorithm to correctly detect stalled or stuck remote cpus, from Jane Chu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Measure receiver forward progress to avoid send mondo timeout SPARC64: Fix sun4v DMA panic
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "Fix the fallout from reworking the locking and resource management in request/free_irq()" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Keep chip buslock across irq_request/release_resources()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull SMP fix from Thomas Gleixner: "Replace the bogus BUG_ON in the cpu hotplug code" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp/hotplug: Replace BUG_ON and react useful
-
Linus Torvalds authored
Merge tag 'regmap-fix-w1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "Fix build due to w1 header refactoring The regmap support for w1 was added shortly before a reorganization of the w1 headers. While this was noticed before the merge window and efforts made to get it resolved in what was sent that managed to fall through the cracks, this cleans up and updates things so we look for the header in the new location. It didn't cause build failures as the driver that's going to be the first user got held up with other review issues" * tag 'regmap-fix-w1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: regmap-w1: Fix build troubles
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is actually just a small set of mainly bug fixes for the original merge window code plus a few trivial updates and qedi boot from SAN support feature patch" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libfc: pass an error pointer to fc_disc_error() scsi: hisi_sas: make several const arrays static scsi: qla2xxx: Off by one in qlt_ctio_to_cmd() scsi: sg: fix SG_DXFER_FROM_DEV transfers scsi: virtio_scsi: always read VPD pages for multiqueue too scsi: qedf: fix spelling mistake: "offlading" -> "offloading" scsi: qedi: fix another spelling mistake: "alloction" -> "allocation" scsi: isci: fix typo in function names scsi: cxlflash: return -EFAULT if copy_from_user() fails scsi: qedi: Add support for Boot from SAN over iSCSI offload
-
Geert Uytterhoeven authored
Several variables had their types changed from unsigned long to u32, but the printk()-style format to print them wasn't updated, leading to: arch/blackfin/kernel/flat.c: In function 'bfin_get_addr_from_rp': arch/blackfin/kernel/flat.c:35:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'u32' [-Wformat] arch/blackfin/kernel/flat.c: In function 'bfin_put_addr_at_rp': arch/blackfin/kernel/flat.c:80:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'u32' [-Wformat] Fixes: 468138d7 ("binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Trond Myklebust authored
The offset of the entry in struct rpc_version has to match the version number. Reported-by:
Dave Jones <davej@codemonkey.org.uk> Fixes: 1c5876dd ("sunrpc: move p_count out of struct rpc_procinfo") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Reported-by:
J. Bruce Fields <bfields@redhat.com>
-
Moni Shoua authored
When resolving an IP address that is on the host of the caller the result from querying the routing table is the loopback device. This is not a valid response, because it doesn't represent the RDMA device and the port. Therefore, callers need to check the resolved device and if it is a loopback device find an alternative way to resolve it. To avoid this we make sure that the response from rdma_resolve_ip() will not be the loopback device. While that, we fix an static checker warning about dereferencing an unintitialized pointer using the same solution as in commit abeffce9 ("net/mlx5e: Fix a -Wmaybe-uninitialized warning") as a reference. Signed-off-by:
-
Moni Shoua authored
In function addr_resolve() the namespace is a required input parameter and not an output. It is passed later for searching the routing table and device addresses. Also, it shouldn't be copied back to the caller. Fixes: 565edd1d ('IB/addr: Pass network namespace as a parameter') Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by:
-
Vladimir Neyelov authored
Under heavy iser target(scst) start/stop stress during login/logout on iser intitiator side happened trace call provided below. The function iscsi_iser_slave_alloc iser_conn pointer could be NULL, due to the fact that function iscsi_iser_conn_stop can be called before and free iser connection. Let's protect that flow by introducing global mutex. BUG: unable to handle kernel paging request at 0000000000001018 IP: [<ffffffffc0426f7e>] iscsi_iser_slave_alloc+0x1e/0x50 [ib_iser] Call Trace: ? scsi_alloc_sdev+0x242/0x300 scsi_probe_and_add_lun+0x9e1/0xea0 ? kfree_const+0x21/0x30 ? kobject_set_name_vargs+0x76/0x90 ? __pm_runtime_resume+0x5b/0x70 __scsi_scan_target+0xf6/0x250 scsi_scan_target+0xea/0x100 iscsi_user_scan_session.part.13+0x101/0x130 [scsi_transport_iscsi] ? iscsi_user_scan_session.part.13+0x130/0x130 [scsi_transport_iscsi] iscsi_user_scan_session+0x1e/0x30 [scsi_transport_iscsi] device_for_each_child+0x50/0x90 iscsi_user_scan+0x44/0x60 [scsi_transport_iscsi] store_scan+0xa8/0x100 ? common_file_perm+0x5d/0x1c0 dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x12c/0x1c0 __vfs_write+0x18/0x40 vfs_write+0xb5/0x1a0 SyS_write+0x55/0xc0 Fixes: 318d311e ("iser: Accept arbitrary sg lists mapping if the device supports it") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
Vladimir Neyelov <vladimirn@mellanox.com> Signed-off-by:
Sagi Grimberg <sagi@grimbeg.me> Signed-off-by:
-
Gustavo A. R. Silva authored
While looking into Coverity ID 1351047 I ran into the following piece of code at drivers/infiniband/core/verbs.c:496: ret = rdma_addr_find_l2_eth_by_grh(&dgid, &sgid, ah_attr->dmac, wc->wc_flags & IB_WC_WITH_VLAN ? NULL : &vlan_id, &if_index, &hoplimit); The issue here is that the position of arguments in the call to rdma_addr_find_l2_eth_by_grh() function do not match the order of the parameters: &dgid is passed to sgid &sgid is passed to dgid This is the function prototype: int rdma_addr_find_l2_eth_by_grh(const union ib_gid *sgid, const union ib_gid *dgid, u8 *dmac, u16 *vlan_id, int *if_index, int *hoplimit) My question here is if this is intentional? Answer: Yes. ib_init_ah_from_wc() creates ah from the incoming packet. Incoming packet has dgid of the receiver node on which this code is getting executed and sgid contains the GID of the sender. When resolving mac address of destination, you use arrived dgid as sgid and use sgid as dgid because sgid contains destinations GID whom to respond to. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Bart Van Assche authored
ib_map_mr_sg() can pass an SG-list to .map_mr_sg() that is larger than what fits into a single MR. .map_mr_sg() must not attempt to map more SG-list elements than what fits into a single MR. Hence make sure that mlx5_ib_sg_to_klms() does not write outside the MR klms[] array. Fixes: b005d316 ("mlx5: Add arbitrary sg list support") Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Israel Rukshin <israelr@mellanox.com> Cc: <stable@vger.kernel.org> Acked-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Dennis Dalessandro authored
As the code stands today the array access in remap_intr() is OK. To future proof the code though we should explicitly check to ensure the index value is not outside of the valid range. This is not a straight forward calculation so err on the side of caution. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Doug Ledford authored
Linux v4.13-rc1
-
minimumlaw@rambler.ru authored
Fixes: cc5d0db3 ("regmap: Add 1-Wire bus support") Commit de0d6dbd ("w1: Add subsystem kernel public interface") Fix place off w1.h header file Cosmetic: Fix company name (local to international) Signed-off-by:
Alex A. Mihaylov <minimumlaw@rambler.ru> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
If kmem_cache_zalloc() returns NULL then the INIT_LIST_HEAD(&data->links); will Oops. The callers aren't really prepared for NULL returns so it doesn't make a lot of difference in real life. Fixes: 5240d9f9 ("libceph: replace message data pointer with list") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
Yan, Zheng authored
For a large directory, program needs to issue multiple readdir syscalls to get all dentries. When there are multiple programs read the directory concurrently. Following sequence of events can happen. - program calls readdir with pos = 2. ceph sends readdir request to mds. The reply contains N1 entries. ceph adds these N1 entries to readdir cache. - program calls readdir with pos = N1+2. The readdir is satisfied by the readdir cache, N2 entries are returned. (Other program calls readdir in the middle, which fills the cache) - program calls readdir with pos = N1+N2+2. ceph sends readdir request to mds. The reply contains N3 entries and it reaches directory end. ceph adds these N3 entries to the readdir cache and marks directory complete. The second readdir call does not update fi->readdir_cache_idx. ceph add the last N3 entries to wrong places. Cc: stable@vger.kernel.org # v4.3+ Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
-
