- 24 Feb, 2020 1 commit
-
-
Christian Borntraeger authored
We also need to rstify the new ioctls that we added in parallel to the rstification of the kvm docs. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 23 Feb, 2020 5 commits
-
-
Oliver Upton authored
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution controls when checking instruction interception. If the 'use IO bitmaps' VM-execution control is 1, check the instruction access against the IO bitmaps to determine if the instruction causes a VM-exit. Signed-off-by:
Oliver Upton <oupton@google.com> Signed-off-by:
-
Oliver Upton authored
Checks against the IO bitmap are useful for both instruction emulation and VM-exit reflection. Refactor the IO bitmap checks into a helper function. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
vmx_check_intercept is not yet fully implemented. To avoid emulating instructions disallowed by the L1 hypervisor, refuse to emulate instructions by default. Cc: stable@vger.kernel.org [Made commit, added commit msg - Oliver] Signed-off-by:
-
Oliver Upton authored
Since commit 5f3d45e7 ("kvm/x86: add support for MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap flag processor-based execution control for its L2 guest. KVM simply forwards any MTF VM-exits to the L1 guest, which works for normal instruction execution. However, when KVM needs to emulate an instruction on the behalf of an L2 guest, the monitor trap flag is not emulated. Add the necessary logic to kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon instruction emulation for L2. Fixes: 5f3d45e7 ("kvm/x86: add support for MONITOR_TRAP_FLAG") Signed-off-by:
-
Li RongQing authored
rename svm_hardware_unsetup as svm_hardware_teardown, move it before svm_hardware_setup, and call it to free all memory if fail to setup in svm_hardware_setup, otherwise memory will be leaked remove __exit attribute for it since it is called in __init function Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
-
- 21 Feb, 2020 8 commits
-
-
Miaohe Lin authored
When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually the only possible outcome here. Reviewed-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Miaohe Lin authored
When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return value of pv_eoi_get_pending() becomes random. Fix the issue by initializing the variable. Reviewed-by:
-
Vitaly Kuznetsov authored
KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*), nothing happens to VMX MSRs on the already existing vCPUs, however, all new ones are created with PIN_BASED_POSTED_INTR filtered out. This is very confusing and results in the following picture inside the guest: $ rdmsr -ax 0x48d ff00000016 7f00000016 7f00000016 7f00000016 This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three. L1 hypervisor may only check CPU0's controls to find out what features are available and it will be very confused later. Switch to setting PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting. Signed-off-by:
-
Vitaly Kuznetsov authored
Even when APICv is disabled for L1 it can (and, actually, is) still available for L2, this means we need to always call vmx_deliver_nested_posted_interrupt() when attempting an interrupt delivery. Suggested-by:
-
Suravee Suthikulpanit authored
Launching VM w/ AVIC disabled together with pass-through device results in NULL pointer dereference bug with the following call trace. RIP: 0010:svm_refresh_apicv_exec_ctrl+0x17e/0x1a0 [kvm_amd] Call Trace: kvm_vcpu_update_apicv+0x44/0x60 [kvm] kvm_arch_vcpu_ioctl_run+0x3f4/0x1c80 [kvm] kvm_vcpu_ioctl+0x3d8/0x650 [kvm] do_vfs_ioctl+0xaa/0x660 ? tomoyo_file_ioctl+0x19/0x20 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x57/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Investigation shows that this is due to the uninitialized usage of struct vapu_svm.ir_list in the svm_set_pi_irte_mode(), which is called from svm_refresh_apicv_exec_ctrl(). The ir_list is initialized only if AVIC is enabled. So, fixes by adding a check if AVIC is enabled in the svm_refresh_apicv_exec_ctrl(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206579 Fixes: 8937d762 ("kvm: x86: svm: Add support to (de)activate posted interrupts.") Signed-off-by:Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Xiaoyao Li authored
Commit 15934878 ("x86/vmx: Introduce VMX_FEATURES_*") missed bit 26 (enable user wait and pause) of Secondary Processor-based VM-Execution Controls. Add VMX_FEATURE_USR_WAIT_PAUSE flag so that it shows up in /proc/cpuinfo, and use it to define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE to make them uniform. Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by:
-
wanpeng li authored
For the duration of mapping eVMCS, it derefences ->memslots without holding ->srcu or ->slots_lock when accessing hv assist page. This patch fixes it by moving nested_sync_vmcs12_to_shadow to prepare_guest_switch, where the SRCU is already taken. It can be reproduced by running kvm's evmcs_test selftest. ============================= warning: suspicious rcu usage 5.6.0-rc1+ #53 tainted: g w ioe ----------------------------- ./include/linux/kvm_host.h:623 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by evmcs_test/8507: #0: ffff9ddd156d00d0 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x680 [kvm] stack backtrace: cpu: 6 pid: 8507 comm: evmcs_test tainted: g w ioe 5.6.0-rc1+ #53 hardware name: dell inc. optiplex 7040/0jctf8, bios 1.4.9 09/12/2016 call trace: dump_stack+0x68/0x9b kvm_read_guest_cached+0x11d/0x150 [kvm] kvm_hv_get_assist_page+0x33/0x40 [kvm] nested_enlightened_vmentry+0x2c/0x60 [kvm_intel] nested_vmx_handle_enlightened_vmptrld.part.52+0x32/0x1c0 [kvm_intel] nested_sync_vmcs12_to_shadow+0x439/0x680 [kvm_intel] vmx_vcpu_run+0x67a/0xe60 [kvm_intel] vcpu_enter_guest+0x35e/0x1bc0 [kvm] kvm_arch_vcpu_ioctl_run+0x40b/0x670 [kvm] kvm_vcpu_ioctl+0x370/0x680 [kvm] ksys_ioctl+0x235/0x850 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x77/0x780 entry_syscall_64_after_hwframe+0x49/0xbe Signed-off-by:Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
Miaohe Lin authored
Commit 13db7734 ("KVM: x86: don't notify userspace IOAPIC on edge EOI") said, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. And var level indicates level-triggered interrupt. But commit 3159d36a ("KVM: x86: use generic function for MSI parsing") replace var level with irq.level by mistake. Fix it by changing irq.level to irq.trig_mode. Cc: stable@vger.kernel.org Fixes: 3159d36a ("KVM: x86: use generic function for MSI parsing") Signed-off-by:
-
- 20 Feb, 2020 2 commits
-
-
Qian Cai authored
arch/x86/kvm/emulate.c: In function 'x86_emulate_insn': arch/x86/kvm/emulate.c:5686:22: error: cast between incompatible function types from 'int (*)(struct x86_emulate_ctxt *)' to 'void (*)(struct fastop *)' [-Werror=cast-function-type] rc = fastop(ctxt, (fastop_t)ctxt->execute); Fix it by using an unnamed union of a (*execute) function pointer and a (*fastop) function pointer. Fixes: 3009afc6 ("KVM: x86: Use a typedef for fastop functions") Suggested-by:Qian Cai <cai@lca.pw> Signed-off-by:
-
Paolo Bonzini authored
The "u" field in the event has three states, -1/0/1. Using u8 however means that comparison with -1 will always fail, so change to signed char. Signed-off-by:
-
- 17 Feb, 2020 2 commits
-
-
Miaohe Lin authored
Fix wrong variable names and grammar error in comment. Signed-off-by:
-
Paolo Bonzini authored
Reported with "make W=1" due to -Wmissing-prototypes. Reported-by:
-
- 12 Feb, 2020 22 commits
-
-
Paolo Bonzini authored
Avoid more embarrassing mistakes. At least those that the compiler can catch. Signed-off-by: -
Mauro Carvalho Chehab authored
Due to some merge conflict, this file ended being alone under Documentation/virtual. The file itself is almost at ReST format. Just minor adjustments are needed: - Adjust title markup; - Adjust a list identation; - add a literal block markup; - Add some blank lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
This file is already in ReST compatible format. So, rename it and add to the kvm's index.rst. While here, use the standard conversion for document titles. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Add markups for literal blocks; - Add markups for tables; - use :field: for field descriptions; - Add blank lines and adjust indentation. Signed-off-by:
-
Mauro Carvalho Chehab authored
This file is almost in ReST format. Just one change was needed: - Add markups for a literal block and change its indentation. While here, use the standard markup for the document title. Signed-off-by: -
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Add markups for tables; - Use list markups; - Add markups for literal blocks; - Add blank lines. Signed-off-by:
-
Mauro Carvalho Chehab authored
This file is almost in ReST format. Just a small set of changes were needed: - Add markups for lists; - Add markups for a literal block; - Adjust whitespaces. While here, use the standard markup for the document title. Signed-off-by: -
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Add markups for tables; - Add markups for literal blocks; - Add blank lines and adjust indentation. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Convert tables; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation Signed-off-by:
-
Mauro Carvalho Chehab authored
- Add a title for the document; - Adjust whitespaces for it to be properly formatted after parsed. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Add proper markups for titles; - Adjust whitespaces and blank lines to match ReST needs; - Mark literal blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
convert api.txt document to ReST format while trying to keep its format as close as possible with the authors intent, and avoid adding uneeded markups. - Use document title and chapter markups; - Convert tables; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - adjust indentation and add blank lines as needed; - use :field: markups; - Use cross-references; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use standard title markup; - adjust lists; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use standard markup for document title; - Adjust indentation and add blank lines as needed; - use the notes markup; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
This document is almost in ReST format. The only thing needed is to mark a list as such and to add an extra whitespace. Yet, let's also use the standard document title markup, as it makes easier if anyone wants later to add sessions to it. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - change indent to match ReST syntax; - use proper table markups; - use literal block markups. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - change indent to match ReST syntax; - use proper table markups; - use literal block markups. Signed-off-by:
-
