- 03 Jul, 2018 8 commits
-
-
Maor Gottlieb authored
Currently the driver sets the mask of the gre_protocol to 0xffff without consideration in the user request. Fix it by copy the mask from the verbs spec. Fixes: da2f22ae ("IB/mlx5: Add support for GRE flow specification") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Michael J. Ruhl authored
The general interrupt handler is_rcv_avail_int() has two paths, do_interrupt() (callback) and handle_user_interrupt(). The do_interrupt() callback is for the threaded receive handling. is_rcv_avail_int() cannot handle threaded IRQs. If the do_interrupt() path is taken, and the IRQ returns IRQ_WAKE_THREAD, the IRQ behavior will be indeterminate. Remove incorrect call to do_interrupt() from is_rcv_avail_int(), leaving the un-threaded (handle_user_interrupt()) path. Fixes: f4f30031 ("staging/rdma/hfi1: Thread the receive interrupt.") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
The in_use_ctxts bitmask is for user receive contexts only. Setting it for any other type of receive context is incorrect. Move initial set of in_use_ctxts bits from the general context init to the user context specific init. Having this bit set can allow contexts to be incorrectly identified by some IRQ handlers. This will allow handle_user_interrupt() will now filter user contexts correctly. Clean up redundant is_rcv_urgent_int() user context check. A follow on patch will clean up an incorrect code path in the is_rcv_avail_int(). Fixes: 8737ce95 ("IB/hfi1: Fix an assign/ordering issue with shared context IDs") Reviewed-by:
-
Bart Van Assche authored
BUG: KASAN: use-after-free in srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] Read of size 4 at addr ffff8801269d23f8 by task check/29726 CPU: 4 PID: 29726 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f235cfe6154 Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bart Van Assche authored
Avoid that KASAN reports the following: BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt] Read of size 4 at addr ffff880151180cb8 by task check/4681 CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_close_ch+0x4f/0x1b0 [ib_srpt] srpt_set_enabled+0xf7/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably") Signed-off-by:
-
Bart Van Assche authored
Avoid that the compiler complains about set-but-not-used variables when building with W=1. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Remove the driver version and release date information because such information is not relevant for an upstream driver. See also commit e1267b01 ("RDMA: Remove useless MODULE_VERSION"). Signed-off-by:
-
Bart Van Assche authored
IB_MULTICAST_LID_BASE is defined as follows: #define IB_MULTICAST_LID_BASE cpu_to_be16(0xC000) Hence use be16_to_cpu() to convert it to CPU endianness. Compile-tested only. Fixes: af808ece ("IB/SA: Check dlid before SA agent queries for ClassPortInfo") Signed-off-by:
-
- 29 Jun, 2018 6 commits
-
-
Yishai Hadas authored
Improve uverbs_cleanup_ucontext algorithm to work properly when the topology graph of the objects cannot be determined at compile time. This is the case with objects created via the devx interface in mlx5. Typically uverbs objects must be created in a strict topologically sorted order, so that LIFO ordering will generally cause them to be freed properly. There are only a few cases (eg memory windows) where objects can point to things out of the strict LIFO order. Instead of using an explicit ordering scheme where the HW destroy is not allowed to fail, go over the list multiple times and allow the destroy function to fail. If progress halts then a final, desperate, cleanup is done before leaking the memory. This indicates a driver bug. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
Since there are adapters that have four ports, increase the size of the srpt_device.port[] array. This patch avoids that the following warning is hit with quad port Chelsio adapters: WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port)); Reported-by:Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Sagi Grimberg authored
We need to set can_queue earlier than when enabling the scsi host. in a blk-mq enabled environment, the tagset allocation is taken from can_queue which cannot be modified later. Also, pass an updated .can_queue to iscsi_session_setup to have enough iscsi tasks allocated in the session kfifo. Reported-by:
Karandeep Chahal <karandeepchahal@gmail.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Vijay Immanuel authored
Do not call sk_dst_set() on every packet transfer because that calls sk_tx_queue_clear(), which clears the tx queue. A QP must stay on the same tx queue to maintain packet order. Signed-off-by:
Vijay Immanuel <vijayi@attalasystems.com> Acked-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
This lock used to be protecting a call to dst_get_neighbour_noref, however the below commit changed it to dst_neigh_lookup which no longer requires rcu. Access to nud_state, neigh_event_send or rdma_copy_addr does not require RCU, so delete the lock. Fixes: 02b61955 ("infiniband: Convert dst_fetch_ha() over to dst_neigh_lookup().") Signed-off-by:
-
Leon Romanovsky authored
The failure in releasing one UAR doesn't mean that we can't continue to release rest of system pages, so don't return too early. As part of cleanup, there is no need to print warning if mlx5_cmd_free_uar() fails because such warning will be printed as part of mlx5_cmd_exec(). Signed-off-by:
-
- 27 Jun, 2018 2 commits
-
-
Yuval Shaia authored
This function is not in use - delete it. Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Acked-by:
Adit Ranadive <aditr@vmware.com> Signed-off-by:
-
Jason Gunthorpe authored
port_num is untrusted data from the user, so it should be checked after calling fill_sgid_attr, which validates it. Fixes: 8d9ec9ad ("IB/core: Add a sgid_attr pointer to struct rdma_ah_attr") Signed-off-by:
-
- 26 Jun, 2018 4 commits
-
-
Jason Gunthorpe authored
Since slave GID's do not exist in the core gid table we can no longer use the core code to help do this without creating inconsistencies. Directly create the AH using mlx4 internal APIs. Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Leon Romanovsky authored
kern_spec->reserved is checked prior to calling kern_spec_to_ib_spec_filter() which makes this second check redundant. Signed-off-by:
-
Leon Romanovsky authored
dma_map_sg_attrs() returns 0 on error and can't return a negative number (ensured by BUG_ON), so don't check. Signed-off-by:
-
Leon Romanovsky authored
Number of specs is provided by user and in valid case can be equal to zero. Such argument causes to call to kcalloc() with zero-length request and in return the ZERO_SIZE_PTR is assigned. This pointer is different from NULL and makes various if (..) checks to success. Fixes: b6ba4a9a ("IB/uverbs: Add support for flow counters") Signed-off-by:
-
- 25 Jun, 2018 15 commits
-
-
Leon Romanovsky authored
Following the removal of ib_create_flow(), adjust the code to get rid of ib_destroy_flow() too. Signed-off-by:
-
Leon Romanovsky authored
There are no kernel users of this interface so lets drop it. Signed-off-by:
-
Jason Gunthorpe authored
In the accepted series "Refactor ib_uverbs_write path", we presented the roadmap to get rid of uverbs_cmd_mask and uverbs_ex_cmd_mask fields in favor of simple check of function pointer. So let's put NULL check of create_flow function callback despite the fact that uverbs_ex_cmd_mask still exists. Link: https://www.spinics.net/lists/linux-rdma/msg60753.htmlSuggested-by:
-
Bart Van Assche authored
Reflect the acquisition of SanDisk by Western Digital in my e-mail address. Remove the reference to David Dillow's git tree since SRP patches are queued by Doug and Jason. Remove the reference to the OpenFabrics website since the srp_daemon source code has been moved from that website into the rdma-core project. Add an entry for the SRP target driver. Signed-off-by:
-
Jason Gunthorpe authored
usnic has a modified version of the core codes' ib_umem_get() and related, and the copy misses many of the bug fixes done over the years: Commit bc3e53f6 ("mm: distinguish between mlocked and pinned pages") Commit 87773dd5 ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get") Commit 8494057a ("IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic") Commit 8abaae62 ("IB/core: disallow registering 0-sized memory region") Commit 66578b0b ("IB/core: don't disallow registering region starting at 0x0") Commit 53376fed ("RDMA/core: not to set page dirty bit if it's already set.") Commit 8e907ed4 ("IB/umem: Use the correct mm during ib_umem_release") Signed-off-by:
-
Yishai Hadas authored
This patch follows the logic from ib_core but considers the internal device state upon executing the involved commands. Specifically, Upon internal error state modify QP to an error state can be assumed to be success as each in-progress WR going to be flushed in error in any case as expected by that modify command. In addition, As the drain should never fail the driver makes sure that post_send/recv will succeed even if the device is already in an internal error state. As such once the driver will supply the simulated/SW CQEs the CQE for the drain WR will be handled as well. In case of an internal error state the CQE for the drain WR may be completed as part of the main task that handled the error state or by the task that issued the drain WR. As the above depends on scheduling the code takes the relevant locks and actions to make sure that the completion handler for that WR will always be called after that the post_send/recv were issued but not in parallel to the other task that handles the error flow. Signed-off-by:
-
Yishai Hadas authored
This patch follows the logic from ib_core but considers the internal device state upon executing the involved commands. Specifically, Upon internal error state modify QP to an error state can be assumed to be success as each in-progress WR going to be flushed in error in any case as expected by that modify command. In addition, As the drain should never fail the driver makes sure that post_send/recv will succeed even if the device is already in an internal error state. As such once the driver will supply the simulated/SW CQEs the CQE for the drain WR will be handled as well. In case of an internal error state the CQE for the drain WR may be completed as part of the main task that handled the error state or by the task that issued the drain WR. As the above depends on scheduling the code takes the relevant locks and actions to make sure that the completion handler for that WR will always be called after that the post_send/recv were issued but not in parallel to the other task that handles the error flow. Signed-off-by:
-
Jason Gunthorpe authored
Now that all users have been converted to use the version of these APIs that returns a gid_attr pointer we can delete the old entry points. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Prior patches now ensure that the AV has a sgid_attr, if one would have been required. Instead of querying for one, take it directly from the AH. Signed-off-by:
-
Parav Pandit authored
While processing a path record entry in CM messages the associated GID attribute is now also supplied. Currently for RoCE a netdevice's net namespace pointer and ifindex are stored in path record entry. Both of these fields of the netdev can change anytime while processing CM messages. Additionally storing net namespace without holding reference will lead to use-after-free crash. Therefore it is removed. Netdevice information for RoCE is instead provided via referenced gid attribute in ib_cm requests. Such a design leads to a situation where the kernel can crash when the net pointer becomes invalid. However today it is always initialized to init_net, which cannot become invalid. In order to support processing packets in any arbitrary namespace of the received packet, it is necessary to avoid such conditions. This patch removes the dependency on the net pointer and ifindex; instead it will rely on SGID attribute which contains a pointer to netdev. Signed-off-by:
-
Parav Pandit authored
Make the sgid_attr available along with path information to the event consumer, this allows the consumer to keep using the same GID table entry as the event is related to. Signed-off-by:
-
Parav Pandit authored
Hold reference to the the sgid_attr which is used in a cm_id until the cm_id is destroyed. Signed-off-by:
-
Parav Pandit authored
Use the sgid and other information from the path record to figure out the sgid_attrs. Store the selected table entry in the sgid_attr for everything else to use. Signed-off-by:
-
Parav Pandit authored
This is really just a CM support function, normally a multicast address does not have a specific SGID - but the RDMA CM usage model does restrict things to the netdevice the CM id is bound to, at least for roce case. Store the selected table entry in the sgid_attr for everything else to use. Signed-off-by:
-
Parav Pandit authored
The work completion is inspected to determine what dgid table entry was used to receieve the packet, produces a sgid_attr that matches and sticks it in the ah_attr. All callers of this function are now required to release the ah_attr on success. Signed-off-by:
-
- 22 Jun, 2018 5 commits
-
-
Michael J. Ruhl authored
The INTx IRQ support does not work for all HF1 IRQ handlers (specifically the receive data IRQs). Remove all supporting code for the INTx IRQ. If the requested MSIx vector request is unsuccessful, do not allow the driver to continue. Reviewed-by:
Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
Many fields in ctxtdata are incorrectly sized and the organization of the fields within the structure is a jumble. Fix by: - Correcting oversize fields. - Putting fields common to all contexts at the top with hot fields at the top. - Moving PSM fields to the bottom of the structure. Reviewed-by:
-
Mike Marciniszyn authored
Remove the sizeable cache of the chip sizing CSRs and replace with CSR reads as needed. Reviewed-by:
-
Mike Marciniszyn authored
Reviewed-by:
-
Mike Marciniszyn authored
Fields in this structure are sized excessively based on hardware limitations and input values. Fix by reducing fields as appropriate and repositioning to close holes in the structure. Reviewed-by:
-
